This propellant was developed for Winchester factory-loaded ammunition for 357 Magnum, 44 Magnum, and 410 Bore. Its high loading density provides optimal velocity. 296 is recommended by Winchester for 410 Bore AA loads.
Shape | Color | Perforation | Diameter min | Diameter max | Length/thick. min | Length/thick. max | Manufacturer |
---|---|---|---|---|---|---|---|
Flattened ball | Gray | No | 0.33 mm | 0.6 mm | 0.18 mm | 0.18 mm | Olin / Primex Technologies |
Ladedata som finnes på hjemmesidene til Evje PK er KUN ment som en veiledning! Ladedata skal alltid verifiseres mot kjente kilder (kruttprodusenter, ladebøker o.l.)
Data funnet på våre hjemmesider brukes på eget ansvar, og Evje Pistolklubb fratar seg alt ansvar for feil bruk av, eller skrivefeil i oppgitte data.
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 67 | cast | 11.9 | 1,603 | 3 inches at 50 yards; ten grains gave consistent 2-1/2-inch groups |
![]() | 60 | Hornady | 12.0 | 1,583 | 2-1/2 to 3 inches at 50 yards; slightly compressed load |
revolver Velocities represent five-shot averages taken fifteen feet from the muzzle of the converted S&W Model 15 revolver with an Oehler Model 10 chronograph. Temperature averaged fifty degrees. Group size represents distance between centers of the widest-spaced shots. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 110 | Hornady roundnose | 15.0 | 1,433 | primer: WSR |
![]() | 110 | Speer hollowpoint | 15.0 | 1,369 | primer: WSR |
in a Black Hawk Test firearm was a Ruger Blackhawk with a 7 1/2-inch barrel. All cases werre Remington. Maximum case length, 1.290 inches. Temperature during testing was 75 degrees Fahrenheit. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 100 | Speer RN SP | 14.5 | 1415 | start charge; primer: CCI 450 Magnum |
![]() | 100 | Speer RN SP | 15.5 | 1527 | max charge; primer: CCI 450 Magnum |
![]() | 110 | Speer HP or RN SP | 14.0 | 1259 | start charge; primer: CCI 450 Magnum |
![]() | 110 | Speer HP or RN SP | 15.0 | 1363 | max charge; primer: CCI 450 Magnum |
Speer Reloading Manual #14 max. case length: 1.290"; trim-to length: 1.280"; max cart. OAL: 1.690"; RCBS shell holder: #17; cart. case: IMI Commercial; primer: CCI 400 (except where otherwise specified in remarks); test firearm: Ruger Blackhawk; barrel length: 7.5"; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 120 | Cast #311359 gas check | 13.5 | 1415 | max load; reduced loads not recommended by Winchester |
![]() | 123 | Cast #311576 gas check | 13.5 | 1431 | max load; reduced loads not recommended by Winchester |
![]() | 130 | Cast #311410 | 12.5 | 1356 | max load; reduced loads not recommended by Winchester |
Revolver Lyman Cast Bullet Handbook cases: Federal; trim-to length: 1.286"; primers: Remington 6 1/2; primer size: Small Rifle Magnum and Small Rifle; Lyman shell holder: No. 19; cast bullets used size to .308" dia.; firearm used: Ruger Blackhawk; barrel length: 7 1/2"; twist: 1-20"; groove diameter: .308" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 90 | Hornady HP-XTP | 11.9 | 1274 | |
![]() | 90 | Hornady HP-XTP | 13.0 | 1341 | |
![]() | 90 | Hornady HP-XTP | 14.1 | 1430 | |
![]() | 90 | Hornady HP-XTP | 15.3 | 1529 | maximum load |
T/C & Ruger Using Hornady Bullets Gun: Ruger Blackhawk; barrel length: 7 1/2 inches; case: Hornady Frontier; primer: Winchester Small Rifle; bullet diameter: .308"; 90 GR Hornady HP-XTP COAL: 1.510"; 110 GR RN & FMJ COAL: 1.680"; maximum COAL: 1.680"; maximum case length: 1.290"; trim to length: 1.280". |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 90 | Sierra Jacketed JHC | 9.9 | 1177 | max load; 19,400 cup; 1.315" OAL |
Lyman Reloading Manual 49th Edition cases: Federal; trim-to length: 1.065"; primers: Federal 100; primer size: Small Pistol; Lyman shell holder: No. 9; cast bullets used sized to .313" dia.; firearm used: Universal Receiver; barrel length: 5"; twist: 1-16"; groove dia.: .312" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 100 | Speer JHP | 9.0 | 1,020 | starting charge; COAL tested: 1.345" |
![]() | 100 | Speer JHP | 9.9 | 1,059 | MAXIMUM charge; COAL tested: 1.345" |
Speer Reloading Manual #14 max. case length: 1.075"; trim-to length: 1.065"; max cart. OAL: 1.350"; RCBS shell holder: #23; cart. case: Federal; primer: CCI 500; test firearm: Ruger Single Six; barrel length: 5.5"; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 90 | Sierra HC | 12.0 | 1,679 | primer: FC 100; group (50 yds): 1.25 inches; maximum load for Contender |
![]() | 110 | Sierra HC | 10.0 | 1,393 | primer: FC 100; group (50 yds): 1.3 inches; maximum load for Contender |
in a 10-inch Contender For Contender with 10-inch barrel, .308 bore diameter, using .308 bullets. The Hornady 85-grain HC and Sierra 90-grain HC are .312-inch diameter, but loads listed for them were OK in the author's .308-inch Contender. All other jacketed bullets were .308 and cast bullets were sized .308. Consult reloading manuals for data for .32 H&R Magnums in revolvers. Federal cases used for all loads. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 100 | Hornady XTP | 11.5 | 1,142 | Extreme Spread: 8; 1.35 (25-yard group) |
Ruger Single-Six Loads |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 100 | Speer JHP | 6.0 | 635 | start charge; test firearm: S&W K32 6" |
![]() | 100 | Speer JHP | 6.6 | 742 | max charge; test firearm: S&W K32 6" |
Speer Reloading Manual #14 This is for the 32 S&W Long and 32 Colt New Police cartridges only. max. case length: 0.920"; trim-to length: 0.910"; max cart. OAL: 1.280"; RCBS shell holder: #23; cart. case: Remington; primer: CCI 500; maximum loads should be used with CAUTION |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 110 | JHP | 15.5 | 1,800 | OAL (inches): 1.70 |
T/C Contender Only Loads 10-inch barrel | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 100 | Speer JHP | 13.5 | 1,418 | extreme spread: 41; 25-yard group: 2.0 inches |
Colt Single Action Army (30,000 CUP) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 100 | Speer RNSP | 15.5 | 1646 | start charge |
![]() | 100 | Speer RNSP | 16.5 | 1897 | max charge |
![]() | 110 | Speer HP, RNSP or Spire SP | 14.5 | 1610 | start charge |
![]() | 110 | Speer HP, RNSP or Spire SP | 15.5 | 1765 | max charge |
![]() | 130 | Speer HP or FN SP | 13.5 | 1443 | start charge |
![]() | 130 | Speer HP or FN SP | 14.5 | 1602 | max charge |
Contender Only Speer Reloading Manual #14 max. case length: 1.315"; trim-to length: 1.305"; RCBS shell holder: #1; cart. case: Winchester; primer: CCI 500; test firearm: T/C Contender; barrel length: 10"; NOTE: Do not substitute the .312" 100-grain JHP (#3981) for the 100-grain RNSP; maximum loads should be used with CAUTION |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 100 | Hornady XTP | 12.2 | 1419 | start load; COL: 1.450"; 31,400 psi |
![]() | 100 | Hornady XTP | 13.2 | 1525 | max load; COL: 1.450"; 38,500 psi |
Hodgdon Data Case: Federal; barrel length: 5"; twist: 1:16"; trim length: 1.200"; primer: Federal 200; bullet diam.: .312 (except where otherwise specified in remarks). NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 115 | Speer Gold Dot Hollow-Point | 12.5 | 1269 | start charge |
![]() | 115 | Speer Gold Dot Hollow-Point | 13.5 | 1383 | max charge; compressed load |
![]() | 100 | Speer Gold Dot Hollow-Point | 13.5 | 1412 | start charge |
![]() | 100 | Speer Gold Dot Hollow-Point | 14.5 | 1524 | max charge; compressed load |
Magnum Speer Gold Dot Data max. case length: 1.200"; trim-to length: 1.190"; COAL tested: 1.465"; max cart. OAL: 1.475"; RCBS shell holder: #23; cart. case: Federal; primer: Federal 205; test firearm: Ruger SP-101; barrel length: 3". SPECIAL NOTE REGARDING PRIMERS: Due to the high operating pressures, factory ammo for the 327 Federal uses small rifle primers to prevent primer flowback. These handloads were developed with Federal #205 small rifle primers. However, small rifle MAGNUM primers are neither required nor recommended. Maximum loads should be used with CAUTION. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 100 | Speer JHP | 12.0 | 1197 | primer: CCI 550; case: Speer; OAL (inches): 1.4575 |
![]() | 100 | Speer JHP | 13.2 | 1287 | primer: CCI 550; case: Speer; OAL (inches): 1.4575 |
Data Firearm used was a Ruger SP101 with a 3 1/16-inch barrel. Federal Cartridge and Speer cases used as noted. Maximum case length: 1.200 inches. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 100 | Speer JHP | 12.0 | 1197 | primer: CCI 550; case: Speer; overall loaded length (inches): 1.4575 |
![]() | 100 | Speer JHP | 13.2 | 1287 | primer: CCI 550; case: Speer; overall loaded length (inches): 1.4575 |
Loads Firearms used for testing these loads was a Ruger SP101 with a 3 1/16-inch barrel. Federal and Speer cases and CCI 500 and CCI 550 primers were used throughout. Case length: 1.200 inches; throat: .313 inch; barrel cylinder gap: .006 inch; groove diameter: .3123 inch. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 137 | JSP | 22.0 | 1,675 | load 8; primer: CCI 350; 35,000 c.u.p. |
![]() | 137 | JSP | 26.0 | 1,902 | load 9; primer: CCI 350; 49,000 c.u.p. |
These loads were developed with cases formed from .44 AMP brass; cases formed from rifle brass may have less capacity, requiring a reduction in charges to maintain equal pressures. Loads 5, 7, 8 and 11 will not produce reliable gun cycling and may be increased from .5 to one grain to do so. They are included to show the relatively high pressure and velocity levels which are essential with the AMP pistol; it doesn't like light loads. Loads two and three are the most versatile of the lot, and are the standard loads adopted by many owners of .357 AMP pistols. Zeroed at 100 yards, these loads drop roughly 8 inches at 200 yards, with standard open sights. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 146 | Speer JHP | 14.5 | 1,016 | case: S-X; primer: S-V; case expansion moderate; most accurate 146-grain load; 6" barrel |
![]() | 146 | Speer JHP | 15.5 | 1,090 | case: S-X; primer: S-V; case expansion moderate; 6" barrel |
![]() | 150 | Sierra JHC | 16.0 | 1,177 | case: Nor.; primer: CCI 550; case expansion moderate; 6" barrel |
![]() | 158 | Speer JSP | 16.6 | 1,207 | case: W-W; primer: CCI 550;case expansion normal; fine load; 6" barrel |
![]() | 158 | Hornady JHP | 15.0 | 1,122 | case: W-W; primer: CCI 550; case expansion moderate; very accurate; 6" barrel |
![]() | 158 | Hornady JHP | 16.0 | 1,191 | case: W-W; primer: CCI 550; case expansion normal; 6" barrel |
![]() | 158 | Speer jacketed hollowpoint | 16.6 | 1,295 | 39,500 CUP |
Colt "357" Revolver with six-inch barrel used for all accuracy and velocity testing. Velocities are Instrumental (IV) taken at ten feet from muzzle. Temperature 60 degrees F. Chronograph set-up: Oehler Model 31 Chronotach with Oehler Model 51 electronic screens; screen spacing ten feet. Update: Alliant Powder Company does not recommend Blue Dot in the .357 magnum using 125-grain bullets. Recipes for heavier bullet weights are acceptable. Their new tests on recent powder samples have shown high pressure spikes that can damage personal property or injure you. For this reason we removed all 125-grain Blue Dot data from .357 magnum tables. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 155 | Lyman 358439 HP | 14.0 | 1,247 | |
Cast Bullet - Lyman Mould Revolver used: Colt Python, 6-inch barrel; overall loaded length (inches): 1.53; Lyman 358439 HP (sized to .358 inch); water-quenched wheelweight alloy; Velocity figures are the average of at least six rounds fired approximately 10 feet from the muzzle using an Oehler Model 35P chronograph. Ambient temperature during testing averaged 58 degrees Fahrenheit. CCI standard velocity primers used. Loads were assembled using Winchester cases. All loads should be reduced 5 percent for initial load development. This data is intended only for use by persons experienced in the proper and safe practice of handloading ammunition. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 135 | Speer GDHP SB | 17.5 | 1105 | start charge; primer: CCI 550 Magnum |
![]() | 135 | Speer GDHP SB | 18.5 | 1130 | maximum charge; primer: CCI 550 Magnum |
(Handgun Short Barrel Velocities) Speer Reloading Manual #14 max. case length: 1.290"; trim-to length: 1.280"; max cart. OAL: 1.590"; RCBS shell holder: #6; cart. case: Speer; primer: CCI 500 (except where otherwise specified in remarks); test firearm: S&W Model 19; barrel length: 2.5"; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 125 | Speer UCSP, GDHP, UCHP or TMJ FN | 18.3 | 1188 | start charge; primer: CCI 550 Magnum |
![]() | 125 | Speer UCSP, GDHP, UCHP or TMJ FN | 20.3 | 1336 | maximum charge; primer: CCI 550 Magnum |
![]() | 135 | Speer GDHP SB | 17.5 | 1264 | start charge; primer: CCI 550 Magnum |
![]() | 135 | Speer GDHP SB | 18.5 | 1377 | maximum charge; primer: CCI 550 Magnum |
![]() | 140 | Speer UCHP | 17.0 | 1327 | start charge; primer: CCI 550 Magnum |
![]() | 140 | Speer UCHP | 18.0 | 1367 | maximum charge; primer: CCI 550 Magnum |
![]() | 158 | Speer TMJ FN, UCHP, GDHP or UCSP | 13.2 | 1089 | start charge; primer: CCI 550 Magnum |
![]() | 158 | Speer TMJ FN, UCHP, GDHP or UCSP | 14.7 | 1185 | maximum charge; primer: CCI 550 Magnum |
(Handgun) Speer Reloading Manual #14 max. case length: 1.290"; trim-to length: 1.280"; max cart. OAL: 1.590"; RCBS shell holder: #6; cart. case: Speer; primer: CCI 500 (except where otherwise specified in remarks); test firearm: S&W model 19; barrel length: 6"; NOTE: Do not use the 110-grain Gold Dot SB HP (#4009) in the 357 Magnum; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 125 | Jacketed | 18.5 | 1800 | never exceed; compressed; min OAL: 1.540; 32,500 cup |
![]() | 150 | Lead | 14.0 | 1510 | never exceed; min OAL: 1.540; 32,000 cup |
![]() | 158 | Jacketed | 16.6 | 1610 | never exceed; compressed; min OAL: 1.590; 39,500 cup |
![]() | 158 | Lead | 14.5 | 1560 | never exceed; min OAL: 1.540; 38,000 cup |
![]() | 170 | Jacketed | 14.3 | 1390 | never exceed; min OAL: 1.540; 42,000 cup |
![]() | 200 | Lead | 12.4 | 1335 | never exceed; compressed; min OAL: 1.540; 35,000 cup |
Lee Precision Data Small Pistol Primer. With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 160 | Speer JSP | 16.5 | 1,790 | Marlin |
![]() | 160 | Speer JSP | 16.5 | 1,340 | Dan Wesson |
![]() | 158 | Speer JHP | 16.5 | 1,770 | Marlin |
![]() | 158 | Speer JHP | 16.5 | 1,320 | Dan Wesson |
(Marlin Carbine and Dan Wesson Revolver) All velocity readings are instrumental at fifteen feet from muzzle. Barrel lengths: Marlin 18-1/2 inches, Dan Wesson six inches. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 158 | Nosler Sporting Handgun Jacketed Hollow Point | 14.8 | 1,540 | maximum load; most accurate load tested |
![]() | 158 | Nosler Sporting Handgun Jacketed Hollow Point | 14.3 | 1,530 | |
![]() | 158 | Nosler Sporting Handgun Jacketed Hollow Point | 13.8 | 1,520 | |
(Using 158 GR Nosler Bullets) Handgun; Case: Federal; primer: WSPM; barrel length/make: 8.3" H-S Precision; twist: 1-16"; bullets: 158 GR Sporting Handgun Revolver JHP; OACL: 1.585"; maximum OACL: 1.590". Use Maximum Loads with Caution | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 125 | JHP | 18.5 | 1,800 | 32,500 cup |
![]() | 145 | STHP | 17.5 | 1,640 | 31,600 cup |
![]() | 150 | Lead | 14.0 | 1,510 | 32,000 cup |
![]() | 158 | Lead | 14.5 | 1,560 | 38,000 cup |
![]() | 158 | JHP | 16.6 | 1,610 | 39,500 cup |
![]() | 170 | FMJ | 14.3 | 1,390 | 42,000 cup |
![]() | 200 | Lead | 12.4 | 1,335 | 35,000 cup |
Winchester Handgun Data trim to length: 1.285"; max. overall length with bullet seated: 1.590"; nominal bullet diameter (jacketed): .358"; barrel length: 8.375"; WARNING FOR 296 POWDER: loads using 296 powder require heavy bullet pull (heavy crimp); using 296 powder with light bullet pull (light crimp) may result in squib loads and cause damage to the firearm, shooter and/or bystanders; all loads shown are maximum charge wt. (grs.) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 110 | Hornady XTP | 23.0 | 2,078 | col: 1.590"; 37,200 cup |
![]() | 125 | Hornady XTP | 22.0 | 1,966 | col: 1.590"; 41,400 cup |
![]() | 140 | Hornady XTP | 19.0 | 1,762 | col: 1.590"; 40,900 cup |
![]() | 146 | Speer Jacketed Hollow Point | 17.2 | 1,691 | col: 1.535"; 42,600 cup |
![]() | 150 | Nosler Jacketed Flat Point | 17.0 | 1,606 | col: 1.590"; 28,900 cup |
![]() | 158 | Hornady XTP | 16.7 | 1,591 | col: 1.580"; 40,700 cup |
![]() | 170 | Sierra Jacketed Hollow Cavity | 15.5 | 1,497 | col: 1.580"; 40,800 cup |
![]() | 180 | Nosler Partition | 13.5 | 1,396 | col: 1.575"; 39,100 cup |
Winchester Pistol Data case: Winchester; BBL: 10"; PR: Winchester SPM; NEVER exceed loads listed | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 140 | Speer JHP | 19.7 | 1,867 | case: W-W; primer: CCI 550; 50-yard group: accurate; maximum |
![]() | 140 | Speer JHP | 19.7 | 1,881 | case: W-W; primer: WSP; 50-yard group: accurate; maximum |
![]() | 180 | Speer FN | 15.0 | 1,435 | case: W-W; primer: CCI 550; 50-yard group: 2.2 inches; maximum; .358-inch rifle bullets |
10-inch Contender Barrel All loads crimped in crimping groove or cannelure provided. All data the result of a single representative 10-round group, fired from a sandbag rest. Velocities were measured 10 feet from the muzzle with an Oehler Model 33 chronograph. All cases .357 unless otherwise noted. Update: Alliant Powder Company does not recommend Blue Dot in the .357 magnum using 125-grain bullets. Recipes for heavier bullet weights are acceptable. Their new tests on recent powder samples have shown high pressure spikes that can damage personal property or injure you. For this reason we removed all 125-grain Blue Dot data from .357 magnum tables. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 140 | Sierra JHC | 17.2 | 1,810 | |
![]() | 140 | Speer JHP | 15.0 | 1,644 | |
![]() | 140 | Speer JHP | 17.0 | 1,768 | |
![]() | 158 | Speer JSP | 15.5 | 1,652 | |
![]() | 158 | Sierra JSP | 14.0 | 1,570 | fourth most accurate |
![]() | 158 | Sierra JSP | 16.0 | 1,705 | most accurate load |
Carbine Update: Alliant Powder Company does not recommend Blue Dot in the .357 magnum using 125-grain bullets. Recipes for heavier bullet weights are acceptable. Their new tests on recent powder samples have shown high pressure spikes that can damage personal property or injure you. For this reason we removed all 125-grain Blue Dot data from .357 magnum tables. Taken from Handloader Issue 100 | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 158 | Ideal 358156 | 15.5 | 1139 | group (inches): 3.11; Hornady gas check |
![]() | 158 | Ideal 358156 | 15.5 | 1139 | group (inches): 2.45 |
![]() | 158 | Ideal 358156 | 15.5 | 1139 | group (inches): 2.99; milk carton gas check |
![]() | 158 | Ideal 358156 | 15.5 | 1139 | group (inches): 2.75; aluminum can gas check |
![]() | 158 | Ideal 358156 | 15.5 | 1139 | group (inches): 3.13; .040-inch plastic gas check |
Cast Bullet Data A Smith & Wesson Model 19 with a 4-inch barrel was used to fire these loads at 25 yards. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 151 | SWC RCBS 38-150KT | 17.5 | 1,414 | group (inches): 1.8 |
Cast In An S&W Model 19 All groups fired at 25 yards with revolver mounted in a machine rest. Five shots per group. All handloads used Browning brass and Winchester Small Pistol primers. All bullets crimped heavily. These 14 groups represent only those of 28 tested that grouped five shots into 1.75 inches or less. Six-inch barrel. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 150 | Cast #358477 | 17.8 | 1452 | max load; 41,900 cup; reduced loads not recommended by Winchester |
![]() | 155 | Cast #358156 gas check | 15.6 | 1334 | max load; 39,700 cup; reduced loads not recommended by Winchester |
![]() | 158 | Cast #358311 | 18.0 | 1461 | max load; 41,400 cup; reduced loads not recommended by Winchester |
![]() | 168 | Cast #358429 | 15.2 | 1307 | max load; 39,900 cup; reduced loads not recommended by Winchester |
Handgun Lyman Cast Bullet Handbook cases: Federal; trim-to length: 1.285"; primers: CCI 550; primer size: Small Pistol Magnum; Lyman shell holder: No. 1; cast bullets used size to .357" dia.; firearm used: Universal Receiver and Special Vented Barrel; barrel length: 4"; twist: 1-18 3/4"; groove diameter: .356" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 180 | Hornady Jacketed HP | 14.9 | 1096 | max load; 1.585" OAL; 42,000 cup |
Handgun Lyman Reloading Manual 49th Edition cases: Federal; trim-to length: 1.280"; primers: CCI 550; primer size: Small Pistol, Magnum; Lyman shell holder: No. 1; firearm used: Universal Receiver; barrel length: 4"; twist: 1-18 3/4"; groove dia.: .356" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 125 | Hornady HP-XTP or FP-XTP | 16.9 | 1373 | COAL: 1.590" |
![]() | 125 | Hornady HP-XTP or FP-XTP | 17.6 | 1399 | COAL: 1.590" |
![]() | 125 | Hornady HP-XTP or FP-XTP | 18.2 | 1436 | COAL: 1.590" |
![]() | 125 | Hornady HP-XTP or FP-XTP | 18.9 | 1466 | COAL: 1.590" |
![]() | 125 | Hornady HP-XTP or FP-XTP | 19.6 | 1494 | COAL: 1.590" |
![]() | 125 | Hornady HP-XTP or FP-XTP | 20.3 | 1529 | maximum load; COAL: 1.590" |
![]() | 140 | Hornady HP-XTP | 15.8 | 1266 | COAL: 1.590" |
![]() | 140 | Hornady HP-XTP | 16.4 | 1280 | COAL: 1.590" |
![]() | 140 | Hornady HP-XTP | 17.0 | 1294 | COAL: 1.590" |
![]() | 140 | Hornady HP-XTP | 17.6 | 1309 | COAL: 1.590" |
![]() | 140 | Hornady HP-XTP | 18.2 | 1320 | maximum load; COAL; 1.590" |
![]() | 158 | Hornady HP-XTP or FP-XTP | 12.4 | 1001 | COAL: 1.590" |
![]() | 158 | Hornady HP-XTP or FP-XTP | 13.1 | 1044 | COAL: 1.590" |
![]() | 158 | Hornady HP-XTP or FP-XTP | 13.8 | 1086 | COAL: 1.590" |
![]() | 158 | Hornady HP-XTP or FP-XTP | 14.5 | 1124 | COAL: 1.590" |
![]() | 158 | Hornady HP-XTP or FP-XTP | 15.2 | 1174 | COAL: 1.590" |
![]() | 158 | Hornady HP-XTP or FP-XTP | 16.0 | 1218 | maximum load; COAL; 1.590" |
![]() | 180 | Hornady HP-XTP | 11.1 | 820 | COAL: 1.590" |
![]() | 180 | Hornady HP-XTP | 11.8 | 888 | COAL: 1.590" |
![]() | 180 | Hornady HP-XTP | 12.4 | 959 | COAL: 1.590" |
![]() | 180 | Hornady HP-XTP | 13.1 | 1025 | COAL: 1.590" |
![]() | 180 | Hornady HP-XTP | 13.7 | 1092 | maximum load; COAL; 1.590" |
Handgun Using Hornady Bullets Gun: Ruger GP100; barrel length: 6"; case: Starline; primer: Winchester Small Pistol Magnum; bullet diameter: .357"; maximum COAL: 1.590"; maximum case length: 1.290"; trim to length: 1.280". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 140 | Speer JHP | 18.0 | 1,403 | 1.65 inch group (25 yards) |
![]() | 158 | Hornady XTP | 16.6 | 1,311 | 1.55 inch group (25 yards) |
in a 7 1/2 inch Ruger Bisley | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 125 | Hornady XTP/HP | 20.0 | 1,411 | primer: Winchester SPM; 6-inch barrel velocity: 1,444 |
![]() | 158 | Speer Gold Dot hollowpoint | 16.6 | 1,303 | primer: CCI 550; 6-inch barrel velocity: 1,329 |
in a Ruger GP100 - 4-inch Barrel | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 170 | Sierra JHC | 17.0 | 1,748 | 100-yard group size (inches): 3-3/16; OAL (inches): 1.715 |
![]() | 160 | Speer JSP | 17.5 | 1,878 | 100-yard group size (inches): 2-5/8; OAL (inches): 1.750 |
![]() | 158 | Hornady JSP | 17.5 | 1,739 | 100-yard group size (inches): 2-1/2; OAL (inches): 1.735 |
![]() | 158 | Speer JHP | 17.5 | 1,758 | 100-yard group size (inches): 2-5/8; OAL (inches): 1.695 |
![]() | 196 | NEI 195-358GC | 16.0 | 1,633 | 100-yard group size (inches): 3-7/8; OAL (inches): 1.735 |
in a Ruger No. 1 Warning! All loads used Remington No. 7 1/2 Small Rifle primers. Velocities taken with an Oehler Model 33 with start screen at five feet. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 158 | Speer Gold Dot HP | 16.6 | 1,329 | firearm: Ruger GP-100; barrel length: 6" |
Load Data | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 110 | Hornady XTP | 20.0 | 1,573 | |
![]() | 125 | Hornady XTP | 17.5 | 1,418 | |
![]() | 140 | Hornady XTP | 16.0 | 1,341 | |
Loads (revolver) 4 3/4-inch revolver. Overall length for all cartridges: 1.590 inches. Federal 205 rifle primers used with all jacketed bullets. CCI 500 pistol primers used with all cast bullets. Velocities instrumental at 8 feet using Oehler M35P. All data average of five, five-shot strings. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 140 | Speer JHP | 18.0 | 1,331 | primer: CCI 550 |
![]() | 158 | Hornady XTP-HP | 16.6 | 1,255 | primer: CCI 550 |
New Ruger Model Blackhawk Flat Top Starline cases used throughout. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 110 | Hornady XTP | 22.0 | 1992 | start load; COL: 1.590"; 32,400 cup |
![]() | 110 | Hornady XTP | 23.0 | 2078 | max load; COL: 1.590"; 37,200 cup |
![]() | 125 | Hornady XTP | 21.0 | 1881 | start load; COL: 1.590"; 38,400 cup |
![]() | 125 | Hornady XTP | 22.0 | 1966 | max load; COL: 1.590"; 41,400 cup |
![]() | 140 | Hornady XTP | 17.1 | 1597 | start load; COL: 1.590"; 28,400 cup |
![]() | 140 | Hornady XTP | 19.0 | 1762 | max load; COL: 1.590"; 40,900 cup |
![]() | 146 | Speer JHP | 15.5 | 1512 | start load; COL: 1.535"; 29,200 cup |
![]() | 146 | Speer JHP | 17.2 | 1691 | max load; COL: 1.535"; 42,600 cup |
![]() | 158 | Hornady XTP | 15.0 | 1418 | start load; COL: 1.580"; 28,600 cup |
![]() | 158 | Hornady XTP | 16.7 | 1591 | max load; COL: 1.580"; 40,700 cup |
![]() | 170 | Sierra JHC | 14.0 | 1328 | start load; COL: 1.580"; 25,900 cup |
![]() | 170 | Sierra JHC | 15.5 | 1497 | max load; COL: 1.580"; 40,800 cup |
![]() | 180 | Nosler Part | 13.0 | 1352 | start load; COL: 1.575"; 36,800 cup |
![]() | 180 | Nosler Part | 13.5 | 1396 | max load; COL: 1.575"; 39,100 cup |
Pistol Hodgdon Data Case: Winchester; barrel length: 10"; twist: 1:18.75"; trim length: 1.285"; primer: Winchester SPM; bullet diam.: .357" (except where otherwise specified in remarks). NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 180 | Flat Point | 12.5 | 1,035 | starting load; requires magnum pistol primers; do not reduce load below start charge shown |
![]() | 180 | Flat Point | 13.7 | 1,158 | maximum load; requires magnum pistol primers; do not reduce load below start charge shown |
Pistol (Oregon Trail Handgun/Metallic Silhouette Loads) test gun: Smith & Wesson M-686 6", WSP; do not exceed maximum loads; minimum OAL: 1.580; never reduce stated overall lengths | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 158 | Hornady XTP | 16.6 | 1,826 | rifle load; primer: Win SPM; extreme spread (fps): 31 |
![]() | 158 | Hornady XTP | 16.6 | 1,298 | revolver load; primer: Win SPM; extreme spread (fps): 31 |
Rifle & Revolver Handloads The .357 Magnum rifle loads were shot using a Marlin 1894CS with an 18 1/2-inch barrel. Revolver loads were from a Smith & Wesson 586 with a 6-inch barrel. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 180 | Speer Mag Match TMJ Sil | 14.3 | 1430 | start charge; primer: CCI 550 Magnum |
![]() | 180 | Speer Mag Match TMJ Sil | 15.9 | 1573 | maximum charge; primer: CCI 550 Magnum |
Silhouette Speer Reloading Manual #14 max. case length: 1.290"; trim-to length: 1.275"; RCBS shell holder: #6; cart. case: Speer; primer: CCI 500 (except where otherwise specified in remarks); test firearm: T/C Contender; barrel length: 10"; NOTE: A revolver must have a total cylinder length of at least 1.625 inches (not counting rim recesses, if present) to benefit from this specialty bullet. All cases must be trimmed to 1.275 inches and bullets seated so that the case mouth covers almost all the crimping groove. Apply a very firm crimp to prevent bullet jump during recoil. Make a dummy round (no powder or primer) using the above technique and try it in your cylinder. For proper and safe function the bullet tip must be below - not flush with - the face of the cylinder. Use these loads only in single-shot pistols and heavy-frame revolvers. Maximum loads should be used with CAUTION |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 180 | FMJ | 19.0 | 1670 | maximum load; bullet diam.: .358"; COL: 1.990"; 46,900 cup |
Hodgdon Pistol Data case: Remington; barrel length: 10"; twist: 1:18.75"; trim length: 1.600"; primer: Remington 7 1/2; bullet diam.: .357" (except where otherwise specified in remarks); NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 180 | Jacketed | 19.0 | 1670 | never exceed; min OAL: 1.940; 46,900 cup |
Lee Precision Data With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. Small Pistol primer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 125 | Speer UCSP, GDHP or TMJ RN | 26.0 | 2223 | start charge |
![]() | 125 | Speer UCSP, GDHP or TMJ RN | 28.0 | 2381 | maximum charge; compressed load |
![]() | 140 | Speer UCHP | 24.5 | 2093 | start charge |
![]() | 140 | Speer UCHP | 26.5 | 2261 | maximum charge; compressed load |
![]() | 158 | Speer TMJ FN or UCHP | 21.5 | 1883 | start charge |
![]() | 158 | Speer TMJ FN or UCHP | 23.5 | 2046 | maximum charge |
![]() | 170 | Speer Mag GDSP or 180-gr FNSP | 21.0 | 1708 | start charge |
![]() | 170 | Speer Mag GDSP or 180-gr FNSP | 23.0 | 1881 | maximum charge |
![]() | 180 | Speer Mag Match TMJ Sil | 18.5 | 1572 | start charge |
![]() | 180 | Speer Mag Match TMJ Sil | 20.5 | 1716 | maximum charge |
![]() | 220 | Speer FN SP | 16.0 | 1314 | start charge |
![]() | 220 | Speer FN SP | 18.0 | 1500 | maximum charge |
Speer Reloading Manual #14 max. case length: 1.605"; trim-to length: 1.595"; max cart. OAL: 1.990"; RCBS shell holder: #6; cart. case: Remington; primer: CCI 400; test firearm: T/C Contender; barrel length: 14"; NOTE: the 180-gr FN SP and 220-gr bullet is for single-shot firearms only; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 180 | FMJ | 19.0 | 1,670 | 46,900 cup |
(Winchester Pistol Data) case: Remington; BBL: 10"; PR: Remington 7 1/2; COL: 1.990"; NEVER exceed loads listed | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 200 | Hornady RNSP | 22.5 | 1,429 | average group: 2 1/2 inches; heavy game |
![]() | 215 | Lyman 358627 | 18.0 | 1,352 | average group: 1 1/4 inches; accurate |
Dan Wesson Super Mag 8-Inch Barrel | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 180 | Hornady full-metal-jacket | 21 | 1,552 | compressed charge |
![]() | 158 | Hornady jacketed hollow-point | 23 | 1,540 | compressed charge |
![]() | 140 | Sierra jacketed hollow-cavity | 25 | 1,717 | compressed charge |
![]() | 125 | Speer jacketed hollow-point | 28 | 1,856 | compressed charge |
![]() | 110 | Speer jacketed hollow-point | 29 | 1,889 | compressed charge |
![]() | 160 | Lyman 358429 linotype metal | 21 | 1,509 | |
in Ruger Blackhawk 7 1/2 inch barrel All loads were maximum in the 7 1/2-inch-barreled Ruger Blackhawk, and should not be used unless charges one and two grains lighter produce no sign of excessive pressure. R-P cases, CCI BR-4 primers. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 180 | Speer | 23.4 | 1,646 | expansion ring diameter (inch): .3809 |
![]() | 180 | Speer | 24.0 | 1,674 | expansion ring diameter (inch): .3810 |
![]() | 180 | Speer | 24.4 | 1,713 | expansion ring diameter (inch): .3814 |
![]() | 180 | Speer | 25.0 | 1,744 | expansion ring diameter (inch): .3810 |
![]() | 180 | Speer | 25.4 | 1,791 | expansion ring diameter (inch): .3808; fired cases ejected easily |
![]() | 180 | Speer | 26.0 | 1,821 | expansion ring diameter (inch): .3811; maximum |
in the T/C Contender 180 Speer .358-inch diameter rifle bullet No. 2435. Overall length: 2.26 inches, seating depth: .19 inch. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 158 | Sierra JSP | 24.5 | 1,473 | accuracy: 2 5/8 inches |
![]() | 158 | Sierra JSP | 25.0 | 1,521 | accuracy: 3 3/4 inches |
![]() | 158 | Sierra JSP | 25.5 | 1,294 | accuracy: 5 3/4 inches; because of the erratic velocity readings, no further testing was done with W-296 and this bullet |
![]() | 158 | Sierra JSP | 26.0 | 1,381 | accuracy: 4 inches |
![]() | 180 | Hornady JTCSIL | 22.5 | 1,534 | accuracy: 3 3/8 inches |
![]() | 180 | Hornady JTCSIL | 23.0 | 1,593 | accuracy: 3 1/8 inches |
![]() | 180 | Hornady JTCSIL | 23.5 | 1,622 | accuracy: 4 inches |
![]() | 180 | Sierra FPJ | 23.0 | 1,480 | accuracy: 2 inches |
![]() | 180 | Sierra FPJ | 23.5 | 1,520 | accuracy: 1 1/2 inches |
![]() | 190 | Cast FN | 22.5 | 1,537 | accuracy: 3 inches |
![]() | 190 | Cast FN | 23.0 | 1,579 | accuracy: 4 3/4 inches |
![]() | 190 | Cast FN | 23.5 | 1,543 | accuracy: 2 1/8 inches |
![]() | 190 | Cast FN | 24.0 | 1,637 | accuracy: 3 1/8 inches |
in USA Seville | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 180 | Speer FNFMJ | 20.5 | 1,371 | accuracy: 3 1/4 inches. (A very heavy crimp must be used with this bullet. If the bullet is allowed to "walk," even to the end of the cannelure, it will jam the gun.) |
![]() | 180 | Speer FNFMJ | 21.0 | 1,404 | accuracy: 3 inches. (A very heavy crimp must be used with this bullet. If the bullet is allowed to "walk," even to the end of the cannelure, it will jam the gun.) |
![]() | 180 | Speer FNFMJ | 21.5 | 1,406 | accuracy: 3 7/8 inches. (A very heavy crimp must be used with this bullet. If the bullet is allowed to "walk," even to the end of the cannelure, it will jam the gun.) |
![]() | 180 | Speer FNFMJ | 22.0 | 1,423 | accuracy: 4 1/2 inches. (A very heavy crimp must be used with this bullet. If the bullet is allowed to "walk," even to the end of the cannelure, it will jam the gun.) |
![]() | 180 | Speer FNFMJ | 22.5 | 1,512 | accuracy: 2 1/2 inches. (A very heavy crimp must be used with this bullet. If the bullet is allowed to "walk," even to the end of the cannelure, it will jam the gun.) |
![]() | 180 | Speer FNFMJ | 23.0 | 1,543 | accuracy: 4 1/4 inches. (A very heavy crimp must be used with this bullet. If the bullet is allowed to "walk," even to the end of the cannelure, it will jam the gun.) |
![]() | 180 | Speer FNFMJ | 23.5 | accuracy: 2 1/8 inches. (A very heavy crimp must be used with this bullet. If the bullet is allowed to "walk," even to the end of the cannelure, it will jam the gun.) | |
![]() | 180 | Speer FNFMJ | 24.0 | 1,640 | accuracy: 3 1/4 inches. (A very heavy crimp must be used with this bullet. If the bullet is allowed to "walk," even to the end of the cannelure, it will jam the gun.) |
![]() | 180 | Speer FNFMJ | 24.5 | 1,580 | accuracy: 5 inches; near maximum. (A very heavy crimp must be used with this bullet. If the bullet is allowed to "walk," even to the end of the cannelure, it will jam the gun.) |
![]() | 180 | Hornady JTCSIL | 21.0 | 1,463 | accuracy: 3 1/2 inches; mild. (This bullet fits well in the Ruger cylinder due to the cannelure being farther forward. However, it takes up more powder space than the Speer 180-grain.) |
Loads in Ruger | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 140 | Hornady JHP | 24.0 | 2,154 | primer: CCI 450; pressure (CUP): 27,170; group: 2 15/16 inches; excessive muzzle flash |
![]() | 158 | Lyman 358156 | 24.5 | 2,030 | primer: CCI 400; pressure (CUP):36,920; group: 3 1/2 inches; fastest test load |
![]() | 158 | Hornady JHP | 23.5 | 1,941 | primer: CCI 450; pressure (CUP):39,020; group: 1 5/8 inches; accurate |
![]() | 180 | Sierra FPJ | 22.3 | 1,809 | primer: CCI 400; pressure (CUP): 41,940; group: 2 1/2 inches |
![]() | 180 | Hornady FMJ | 21.5 | 1,782 | primer: CCI 400; pressure (CUP): 41,560; group: 3 1/4 inches |
![]() | 200 | Hornady RNSP | 23.0 | 1,675 | primer: CCI 400; pressure (CUP): 30,970; group: 7/8 inch; accurate |
![]() | 200 | Hornady RNSP | 24.0 | 1,774 | primer: CCI 450; pressure (CUP): 38,670; group: 7/8 inch |
![]() | 215 | Lyman 358627 | 18.0 | 1,537 | primer: CCI 400; pressure (CUP): 32,760; group: 1 3/4 inches |
![]() | 215 | Lyman 358627 | 19.0 | 1,607 | primer: CCI 400; pressure (CUP): 37,480; group: 1 5/8 inches |
![]() | 250 | Hornady RNSP | 21.0 | 1,544 | primer: CCI 400; pressure (CUP): 44,620; group: 3 1/4 inches; bullet yawing |
![]() | 250 | Hornady RNSP | 17.0 | 1,412 | primer: Fed 200; pressure (CUP): 41,760; group: 1 1/2 inches; accurate in Dan Wesson |
![]() | 250 | Hornady RNSP | 17.0 | 1,294 | primer: CCI 400; pressure (CUP): 24,780; group: 7/8 inch; mild load |
![]() | 250 | Hornady RNSP | 19.0 | 1,450 | primer: CCI 400; pressure (CUP): 35,780; group: 2 inches |
![]() | 250 | Hornady RNSP | 20.0 | 1,500 | primer: CCI 400; pressure (CUP): 39,730; group: 3/4 inch; very accurate |
Pressure Barrel Data 14-inch pressure test barrel; groups fired at 50 yards. Manufacturers of arms chambered for the .357 Maximum caution against firing loads exceeding 45,000 CUP. Loads listed here giving pressures over 40,000 CUP are for reference only and are not recommended. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 158 | Lyman 358156 | 25.0 | 1,773 | average group: 3 inches |
![]() | 168 | Lyman 358429 | 24.4 | 1,845 | average group: 3 inches; highest velocity tested |
![]() | 180 | Sierra FMJ | 21.0 | 1,451 | average group: 2 1/4 inches |
![]() | 180 | Speer FMJ | 21.0 | 1,531 | average group: 1 1/8 inches; high velocity |
![]() | 215 | Lyman 358627 | 19.0 | 1,429 | average group: 1 7/8 inches; good hunting load |
Ruger 7 1/2-Inch Barrel | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 180 | Hornady full-metal-jacket | 21 | 1,574 | compressed charge |
![]() | 158 | Hornady jacketed hollow-point | 23 | 1,644 | compressed charge |
![]() | 140 | Sierra jacketed hollow-cavity | 25 | 1,764 | compressed charge |
![]() | 125 | Speer jacketed hollow-point | 28 | 1,870 | compressed charge |
![]() | 110 | Speer jacketed hollow-point | 29 | 1,920 | compressed charge |
Ruger Blackhawk 10 1/2 inch barrel All loads were near maximum in the 10 1/2-inch-barreled Blackhawk, and should not be used unless charges one and two grains lighter produce no sign of excessive pressure. R-P cases, CCI BR-4 primers. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 158 | Lyman 358156 | 24.4 | 1,951 | average group: 1 1/2 inches; accurate, fast |
![]() | 168 | Lyman 358429 | 24.4 | 1,976 | average group: 3 inches |
![]() | 180 | Speer FMJ | 21.0 | 1,660 | average group: 2 inches |
![]() | 180 | Sierra FMJ | 21.0 | 1,659 | average group: 1 1/4 inches; accurate |
![]() | 200 | Hornady Spire Point | 22.5 | 1,721 | average group: 1 1/4 inches; very accurate |
![]() | 215 | Lyman 358627 | 18.0 | 1,500 | average group: 1 1/2 inches; accurate |
![]() | 255 | Lyman 358318 | 20.0 | 1,605 | average group: 1 7/8 inches; big game load |
T/C Contender 10-Inch Barrel | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 158 | Hornady JHP | 23.0 | 1,961 | average group: 4 1/2 inches |
![]() | 180 | Speer FP | 24.5 | 1,966 | |
![]() | 180 | Speer FNSP | 24.0 | 1,903 | average group: 4 inches; hunting |
![]() | 180 | Speer FNSP | 25.0 | 2,007 | average group: 2 1/2 inches; very flat shooting |
![]() | 200 | Hornady RNSP | 24.5 | 1,853 | |
![]() | 200 | Hornady RNSP | 24.5 | 1,875 | average group: 2 inches; most accurate |
![]() | 200 | Hornady RNSP | 25.0 | 1,896average group: 1 7/8 inches; most accurate | |
![]() | 200 | Hornady Spire Point | 22.0 | 1,749 | average group: 4 inches |
![]() | 200 | Hornady Spire Point | 23.0 | 1,855 | average group: 3 3/4 inches |
![]() | 215 | Lyman 358627 | 19.0 | 1,677 | |
![]() | 215 | Lyman 358627 | 19.0 | 1,742 | average group: 2 1/4 inches; hunting load |
![]() | 250 | Hornady softpoint | 21.0 | 1,522 | average group: 3 1/4 inches; silhouette load |
![]() | 255 | Lyman 358318 | 20.0 | 1,614 | |
![]() | 255 | Lyman 358318 | 20.5 | 1,650 | big game load |
T/C Contender in 14-Inch Barrel | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 146 | Speer hollowpoint | 24.5 | 2,081 | 3-inch groups; .357 inch diameter bullet |
![]() | 150 | Sierra softpoint | 24.0 | 2,220 | much better; .357 inch diameter bullet |
![]() | 220 | Speer flatnose softpoint | 17.0 | 1,365 | slowest handload; .358 inch diameter bullet |
T/C Encore in a 15-inch barrel All loads fired in the Encore pistol with a 15-inch Muzzle Tamer Custom Shop barrel. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 110 | Hornady HP-XTP | 26.9 | 1871 | |
![]() | 110 | Hornady HP-XTP | 27.3 | 1911 | |
![]() | 110 | Hornady HP-XTP | 27.8 | 1956 | |
![]() | 110 | Hornady HP-XTP | 28.2 | 1990 | |
![]() | 110 | Hornady HP-XTP | 28.6 | 2017 | |
![]() | 110 | Hornady HP-XTP | 29.0 | 2061 | maximum load |
![]() | 125 | Hornady FP-XTP or HP-XTP | 22.9 | 1751 | |
![]() | 125 | Hornady FP-XTP or HP-XTP | 23.5 | 1760 | |
![]() | 125 | Hornady FP-XTP or HP-XTP | 24.0 | 1765 | |
![]() | 125 | Hornady FP-XTP or HP-XTP | 24.6 | 1795 | |
![]() | 125 | Hornady FP-XTP or HP-XTP | 25.1 | 1801 | |
![]() | 125 | Hornady FP-XTP or HP-XTP | 25.7 | 1811 | maximum load |
![]() | 140 | Hornady HP-XTP | 21.3 | 1635 | |
![]() | 140 | Hornady HP-XTP | 21.8 | 1651 | |
![]() | 140 | Hornady HP-XTP | 22.4 | 1665 | |
![]() | 140 | Hornady HP-XTP | 23.0 | 1673 | |
![]() | 140 | Hornady HP-XTP | 23.6 | 1699 | maximum load |
![]() | 158 | Hornady FP-XTP or HP-XTP | 18.6 | 1295 | |
![]() | 158 | Hornady FP-XTP or HP-XTP | 19.2 | 1326 | |
![]() | 158 | Hornady FP-XTP or HP-XTP | 19.8 | 1371 | |
![]() | 158 | Hornady FP-XTP or HP-XTP | 20.4 | 1399 | |
![]() | 158 | Hornady FP-XTP or HP-XTP | 21.0 | 1412 | |
![]() | 158 | Hornady FP-XTP or HP-XTP | 21.5 | 1422 | maximum load |
![]() | 180 | Hornady HP-XTP | 16.2 | 1312 | |
![]() | 180 | Hornady HP-XTP | 17.4 | 1351 | |
![]() | 180 | Hornady HP-XTP | 17.8 | 1365 | |
![]() | 180 | Hornady HP-XTP | 18.2 | 1370 | |
![]() | 180 | Hornady HP-XTP | 18.5 | 1391 | maximum load |
Using Hornady Bullets Gun: Ruger New Model Super Blackhawk; barrel length: 7 1/2 inches; case: Federal; primer: Remington 7 1/2 Small Rifle; bullet diameter: .357"; COAL: 1.890"; maximum COAL: 1.990"; maximum case length: 1.605"; trim to length: 1.595". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 180 | Hornady HP XTP or InterLock SP, SSP | 17.1 | 1386 | |
![]() | 180 | Hornady HP XTP or InterLock SP, SSP | 17.9 | 1458 | |
![]() | 180 | Hornady HP XTP or InterLock SP, SSP | 18.6 | 1533 | |
![]() | 180 | Hornady HP XTP or InterLock SP, SSP | 19.4 | 1614 | |
![]() | 180 | Hornady HP XTP or InterLock SP, SSP | 20.2 | 1697 | |
![]() | 180 | Hornady HP XTP or InterLock SP, SSP | 21.0 | 1766 | maximum load |
![]() | 200 | Hornady FTX, InterLock RN, InterLock SP | 17.5 | 1255 | |
![]() | 200 | Hornady FTX, InterLock RN, InterLock SP | 18.3 | 1336 | |
![]() | 200 | Hornady FTX, InterLock RN, InterLock SP | 19.1 | 1444 | |
![]() | 200 | Hornady FTX, InterLock RN, InterLock SP | 19.9 | 1525 | maximum load |
(T/C) Data Using Hornady Bullets Gun: Thompson/Center Contender; barrel length: 14 inches; case: Federal; primer: Remington 7 1/2; bullet diameter: .357" and .358"; maximum COAL: 2.250" (1.990" for Revolvers); maximum case length: 1.605"; trim to length: 1.595"; 180 GR Hornady HP XTP COAL: 1.890", InterLock SP, SSP COAL: 2.250"; 200 GR FTX or InterLock SP COAL: 2.250", InterLock RN COAL: 2.200". |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 158 | Lyman 358156 | 12.0 | 1,060 | |
![]() | 158 | Lyman 358156 | 13.0 | 1,179 | |
![]() | 150 | Bull-X 150 | 12.0 | 1,000 | |
![]() | 150 | Bull-X 150 | 13.0 | 1,187 | |
Colt Peacemaker Loads Winchester +P cases used throughout with CCI 450 primers. (Loading the Peacemaker - Dave Scovill) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 158 | Nosler JHP | 10.0 | 833 | case expansion maximum |
Jacketed Bullet Loads in 8 3/8-inchBarrel Loads labeled "maximum" should not be exceeded! Reduce maximum loads 10% for light and alloy-framed guns. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 210 | Hornady SIL | 22.0 | 1,350 | 5.5-inch barrel length Federal cases and CCI Large Pistol primers. |
Update: Alliant Powder Company does not recommend Blue Dot in the .41 Magnum for any bullet weights. Their new tests on recent powder samples have shown high pressure spikes that can damage personal property or injure you. For this reason we removed all Blue Dot data from .41 magnum tables. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 200 | Speer JHP-SWC | 20.0 | 1302 | start charge; primer: CCI 350 Magnum |
![]() | 200 | Speer JHP-SWC | 22.0 | 1428 | maximum charge; primer: CCI 350 Magnum |
![]() | 210 | Speer GDHP | 20.5 | 1251 | start charge; primer: CCI 350 Magnum |
![]() | 210 | Speer GDHP | 21.5 | 1295 | maximum charge; primer: CCI 350 Magnum |
![]() | 220 | Speer JSP-SWC | 18.5 | 1247 | start charge; primer: CCI 350 Magnum |
![]() | 220 | Speer JSP-SWC | 20.5 | 1360 | maximum charge; primer: CCI 350 Magnum |
Speer Reloading Manual #14 max. case length: 1.290"; trim-to length: 1.280"; max cart. OAL: 1.590"; RCBS shell holder: #30; cart. case: Winchester; primer: CCI 300 (except where otherwise specified in remarks); test firearm: S&W Model 57; barrel length: 6"; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 170 | Sierra JHC | 23.5 | 1669 | start load; COL: 1.575"; 21,400 cup |
![]() | 170 | Sierra JHC | 26.5 | 1887 | max load; COL: 1.575"; 37,400 cup |
![]() | 210 | Hornady XTP | 19.8 | 1465 | start load; COL: 1.580"; 25,600 cup |
![]() | 210 | Hornady XTP | 22.0 | 1631 | max load; COL: 1.580"; 36,400 cup |
![]() | 220 | Speer JSP | 18.0 | 1352 | start load; COL: 1.580"; 23,000 cup |
![]() | 220 | Speer JSP | 20.0 | 1529 | max load; COL: 1.580"; 34,000 cup |
![]() | 245 | Cast LSWC | 18.5 | 1372 | start load; COL: 1.630"; 22,800 cup |
![]() | 245 | Cast LSWC | 21.0 | 1563 | max load; COL: 1.630"; 37,400 cup |
![]() | 250 | WFNGC | 17.4 | 1391 | start load; COL: 1.540"; 29,400 cup |
![]() | 250 | WFNGC | 18.5 | 1479 | max load; COL: 1.540"; 38,700 cup |
![]() | 255 | WFNGC | 18.0 | 1327 | start load; COL: 1.660"; 21,000 cup |
![]() | 255 | WFNGC | 19.5 | 1491 | max load; COL: 1.660"; 37,200 cup |
![]() | 265 | WLNGC | 19.5 | 1410 | start load; COL: 1.710"; 24,400 cup |
![]() | 265 | WLNGC | 20.8 | 1540 | max load; COL: 1.710"; 37,600 cup |
Hodgdon Pistol Data Case: Remington; twist: 1:18.75"; primer: Winchester LP; barrel length: 10.125"; trim length: 1.280"; BULLET DIAM.: .410". NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 210 | Jacketed | 20.4 | 1460 | never exceed; compressed; min OAL: 1.540; 24,000 cup |
Lee Precision Data CAUTION: With NEVER EXCEED LOADS; maintain Minimum Over All Length or longer. (Modern Reloading, Second Edition - Richard Lee) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 200 | Speer Jacketed HP | 18.9 | 1309 | sugg. start load; 1.590" OAL; 24,100 cup |
![]() | 200 | Speer Jacketed HP | 21.0 | 1447 | max load; 1.590" OAL; 36,400 cup |
Lyman Reloading Handbook 49th Edition cases: Winchester; trim-to length: 1.280"; primers: Winchester WLP; primer size: Large Pistol; Lyman shell holder: No. 30; firearm used: Universal Receiver; barrel length: 4"; twist: 1-18 3/4"; groove dia.: .409" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 210 | R-P JSP | 18.5 | 1,271 | case: R-P; primer: CCI 350; O.A. Ctg. Lgt.: 1.58; case expansion: normal; accurate |
![]() | 210 | W-W JSP | 18.5 | 1,247 | case: R-P; primer: CCI 350; O.A. Ctg. Lgt.: 1.58; case expansion: moderate |
![]() | 210 | Hornady JHP | 18.5 | 1,270 | case: W-W; primer: CCI 350; O.A. Ctg. Lgt.: 1.58; case expansion: normal; compare to 19-grain load with 210-Sierra |
![]() | 210 | Sierra JHC | 19.0 | 1,269 | case: R-P; primer: CCI 350; O.A. Ctg. Lgt.: 1.575; case expansion: moderate; note effect of larger capacity case on velocity |
![]() | 200 | Harvey J-J | 19.0 | 1,346 | case: R-P; primer: CCI 350; O.A. Ctg. Lgt.: 1.62; case expansion: normal; heavy recoil and flash |
Pet Loads All loads chronographed from 6 1/2-inch barrel Ruger Blackhawk. Oehler Model 31 Chronotach, Oehler Model 51 Electronic screens, spaced 10 feet apart; I.V. = Instrumental Velocity at 10 feet from muzzle. Update: Alliant Powder Company does not recommend Blue Dot in the .41 Magnum for any bullet weights. Their new tests on recent powder samples have shown high pressure spikes that can damage personal property or injure you. For this reason we removed all Blue Dot data from .41 magnum tables. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 200 | Speer JHP-SWC | 20.0 | 1,302 | CCI Magnum Primer used with this powder |
![]() | 200 | Speer JHP-SWC | 22.0 | 1,428 | maximum load; CCI Magnum Primer used with this powder |
![]() | 210 | Speer JSP-SWC | 18.5 | 1,247 | can also be used with 220 gr bullet; CCI Magnum Primer used with this powder |
![]() | 210 | Speer JSP-SWC | 20.5 | 1,360 | maximum load; can also be used with 220 gr bullet; CCI Magnum Primer used with this powder |
Speer Reloading Manual #13 Max. Case Length: 1.290"; Trim-to Length: 1.280"; Max. Cart. Length: 1.590"; RCBS Shellholder: #30; Barrel Length: 6"; Twist: 1-18.75"; Test Firearm: Smith & Wesson Model 57; Case: W-W; Primers: CCI 350; Update: Alliant Powder Company does not recommend Blue Dot in the .41 Magnum for any bullet weights. Their new tests on recent powder samples have shown high pressure spikes that can damage personal property or injure you. For this reason we removed all Blue Dot data from .41 magnum tables. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 170 | Sierra JHC | 23.5 | 1,338 | avg. group: 1.71"; no. of 5-shot groups: 3; most accurate, highest velocity, not sensitive to charge var. |
![]() | 200 | Speer JHP | 20.5 | 1,242 | avg. group: 1.93"; no. of 5-shot groups: 3; most consistent velocity, average sensitivity |
![]() | 210 | Hornady JHP | 20.0 | 1,173 | avg. group: 1.83"; no. of 5-shot groups: 3; second most accurate load, extremely sensitive to charge var. |
![]() | 220 | Speer JSP | 19.8 | 1,258 | avg. group: 1.90"; no. of 5-shot groups: 4; most powerful load, extremely sensitive to charge var. |
W-296 powder in a 4 5/8-inch barrel All loads with CCI 350 primers and RP cases. Test gun was a 4 5/8-inch barrel Ruger Blackhawk. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 170 | Sierra Jacketed Hollow Cavity | 26.5 | 1,887 | col: 1.575"; 37,400 cup |
![]() | 210 | Hornady XTP | 22.0 | 1,631 | col: 1.580"; 36,400 cup |
![]() | 220 | Speer Jacketed Soft Point | 20.0 | 1,529 | col: 1.580"; 34,000 cup |
![]() | 245 | Cast Lead Semi-Wadcutter | 21.0 | 1,563 | col: 1.630"; 37,400 cup |
![]() | 250 | WFNGC | 18.5 | 1,479 | col: 1.540"; 38,700 cup |
![]() | 255 | WFNGC | 19.5 | 1,491 | col: 1.660"; 37,200 cup |
![]() | 265 | WLNGC | 20.8 | 1,540 | col: 1.710"; 37,600 cup |
Winchester Pistol Data case: Remington; BBL: 10.125"; PR: Winchester LP; NEVER exceed loads listed | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 210 | Nosler Sporting Handgun Jacketed Hollow Point | 20.5 | 1,599 | maximum load; compressed load; most accurate powder tested |
![]() | 210 | Nosler Sporting Handgun Jacketed Hollow Point | 20.0 | 1,563 | compressed load; most accurate powder tested |
![]() | 210 | Nosler Sporting Handgun Jacketed Hollow Point | 19.5 | 1,528 | most accurate load tested; most accurate powder tested |
Handgun Using Nosler Bullets Handgun; case: Federal; primer: Fed 150; barrel length/make: 10" Douglas; twist: 1-14"; bullets: 210 GR Sporting Handgun Revolver JHP; OACL: 1.585"; maximum OACL: 1.590". Use Maximum Loads with Caution | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 170 | Sierra JHC | 23.1 | 1,831 | group size (inches): 1 |
![]() | 190 | Lee SWC | 22.4 | 1,764 | unacceptable performance |
![]() | 210 | Hornady JHP | 21.5 | 1,743 | group size (inches): 2 9/16 |
![]() | 215 | Lyman SWC-GC | 19.6 | 1,614 | needs fine tuning |
![]() | 220 | Speer JSP | 20.4 | 1,565 | needs fine tuning |
![]() | 240 | Lee SWC | 18.3 | 1,534 | needs fine tuning |
![]() | 275 | SSK FNL | 16.2 | 1,382 | group size (inches): 2 1/16 |
Carbine Alliant 2400 works best with lighter bullets. Hodgdon H-110 was the best powder choice overall. Winchester W-296 was second best powder choice. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 200 | Speer JHP | 19.0 | 1,104 | primer: CCI 350; very bad muzzle blast |
Data Instrumental velocities measured at a point 12 feet from the muzzle using an Oehler Model 11 chronograph and Skyscreens. Temperatures ranged from 68 to 75 degrees F. while chronographing. Cases were R-P, the only ones available. Update: Alliant Powder Company does not recommend Blue Dot in the .41 Magnum for any bullet weights. Their new tests on recent powder samples have shown high pressure spikes that can damage personal property or injure you. For this reason we removed all Blue Dot data from .41 magnum tables. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 170 | Sierra JHC | 23.0 | 1302 | |
![]() | 210 | Sierra JHC | 21.0 | 1225 | |
![]() | 210 | RCBS 41-210-SWC | 21.0 | 1382 | |
Handloads | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 215 | Semi Wad Cutter | 19.1 | 1,227 | magnum load; start grains; OAL: 1.595 |
![]() | 215 | Semi Wad Cutter | 20.6 | 1,325 | magnum load; never exceed; OAL: 1.595 |
Oregon Trail Bullet Co Data test gun: S&W M-57 6 1/2" except where otherwise noted in remarks; primer: WLP except where otherwise noted in remarks; do not exceed maximum loads; never reduce stated overall lengths | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 210 | Hornady HP-XTP | 18.5 | 1131 | |
![]() | 210 | Hornady HP-XTP | 19.3 | 1171 | |
![]() | 210 | Hornady HP-XTP | 20.1 | 1230 | |
![]() | 210 | Hornady HP-XTP | 20.9 | 1288 | |
![]() | 210 | Hornady HP-XTP | 21.7 | 1348 | |
![]() | 210 | Hornady HP-XTP | 22.6 | 1398 | maximum load |
Revolver Using Hornady Bullets Gun: Smith & Wesson Model 57-1; barrel length: 6 inches; case: Starline; primer: Fed 150; bullet diameter: .410"; COAL: 1.580"; maximum COAL: 1.590"; maximum case length: 1.290"; trim to length: 1.280". |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 180 | SV/JHP | 25.0 | 1,370 | |
![]() | 180 | SV/JHP | 27.0 | 1,520 | |
![]() | 180 | SV/JHP | 29.0 | 1,620 | |
![]() | 180 | SV/JHP | 31.0 | 1,750 | |
![]() | 180 | SV/JHP | 33.0 | 1,890 | |
![]() | 200 | Speer/JSP | 28.0 | 1,510 | |
![]() | 200 | Speer/JSP | 30.0 | 1,590 | |
![]() | 200 | Speer/JSP | 32.0 | 1,730 | |
![]() | 240 | Sierra/JSP | 21.0 | 1,120 | |
![]() | 240 | Sierra/JSP | 23.0 | 1,290 | |
![]() | 240 | Sierra/JSP | 25.0 | 1,490 | |
![]() | 240 | Sierra/JSP | 27.0 | 1,590 | |
![]() | 265 | Hornady/JSP | 20.0 | 1,140 | |
![]() | 265 | Hornady/JSP | 22.0 | 1,300 | |
![]() | 265 | Hornady/JSP | 24.0 | 1,420 | |
![]() | 265 | Hornady/JSP | 25.0 | 1,490 | |
6 1/2-Inch Barrel All loads in CDM cases. Reduce powder charge at least 10 percent when using formed cases. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 180 | SV | 33.0 | 1,880 | Pressure (CUP): 47,000 |
![]() | 240 | Sp | 25.0 | 1,515 | Pressure (CUP): 43,000 |
all loads were assembled with CDM cases and CCI 350 primers. All loads are full-charge and have produced proper cycling in a large number of guns. Loads four and five may be increased slightly, by perhaps one full grain without exceeding safe pressures, but the velocity gain will be relatively small. * Caution: Load three is only for current-production H-110 powder, H-110 lots of several years ago are hotter and will produce excessive pressures with this charge weight. If in doubt, cut back five grains to start. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 225 | Hornady FTX | 22.0 | 1281 | |
![]() | 225 | Hornady FTX | 23.0 | 1351 | |
![]() | 225 | Hornady FTX | 24.0 | 1427 | maximum |
![]() | 225 | Hornady FTX | 24.5 | 1451 | Exceeds MAP/Redhawk ONLY |
Revolver using 225 GR Hornady FTX Bullets Caliber: .44 Magnum; gun: Ruger New Model Blackhawk (Bisley); barrel: 5 1/2-inches; case: Starline; case length: 1.275 to 1.285 inches; cartridge overall length (except where noted otherwise): 1.670 inches; primer: Winchester Large Pistol. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 240 | Speer jacketed softpoint | 24.0 | 1,319 | 38,000 CUP |
This load data has been compiled over many years of testing and experimenting in no fewer than four guns. For a load to be included, it had to produce accuracy of 2 inches or less at 25 yards. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 240 | Barnes Solid | 21.0 | 1388 | start load |
![]() | 240 | Barnes Solid | 23.0 | 1503 | maximum load |
![]() | 250 | Barnes Original | 21.0 | 1365 | start load |
![]() | 250 | Barnes Original | 23.0 | 1495 | maximum load |
![]() | 265 | Barnes Solid | 19.0 | 1303 | start load |
![]() | 265 | Barnes Solid | 21.5 | 1469 | maximum load |
![]() | 275 | Barnes Original | 19.5 | 1321 | start load |
![]() | 275 | Barnes Original | 20.5 | 1431 | maximum load |
![]() | 300 | Barnes Original | 18.0 | 1273 | start load |
![]() | 300 | Barnes Original | 20.0 | 1403 | maximum load |
Contender - Barnes Reloading Manual #1 COAL: 1.604"; primers: WLP; brass: Midway USA | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 237 | Lyman 429421 HP | 21.0 | 1,167 | |
![]() | 237 | Lyman 429421 HP | 22.0 | 1,192 | |
Cast Bullet - Lyman Mould Revolver used: Smith & Wesson Model 29, 6-inch barrel; overall loaded length (inches): 1.69; Lyman 429421 HP (water-quenched wheelweight alloy); Velocity figures are the average of at least six rounds fired approximately 10 feet from the muzzle using an Oehler Model 35P chronograph. Ambient temperature during testing averaged 58 degrees Fahrenheit. CCI standard velocity primers used. Loads were assembled using Winchester cases. All loads should be reduced 5 percent for initial load development except the loads with W-296. Do not reduce below 21 grains. This data is intended only for use by persons experienced in the proper and safe practice of handloading ammunition. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 25 | Speer SWC GC | 22.0 | 1399 | start charge; primer: CCI 350 Magnum |
![]() | 225 | Speer SWC GC | 24.0 | 1471 | maximum charge; primer: CCI 350 Magnum |
![]() | 250 | Speer K | 21.0 | 1343 | start charge; primer: CCI 350 Magnum |
![]() | 250 | Speer K | 23.0 | 1439 | maximum charge; primer: CCI 350 Magnum |
![]() | 200 | Speer Mag JHP | 26.0 | 1521 | start charge; primer: CCI 350 Magnum |
![]() | 200 | Speer Mag JHP | 28.0 | 1639 | maximum charge; primer: CCI 350 Magnum |
![]() | 210 | Speer Mag GDHP | 25.5 | 1562 | start charge; primer: CCI 350 Magnum |
![]() | 210 | Speer Mag GDHP | 27.5 | 1664 | maximum charge; primer: CCI 350 Magnum |
![]() | 225 | Speer JHP-SWC | 22.0 | 1398 | start charge; primer: CCI 350 Magnum |
![]() | 225 | Speer JHP-SWC | 24.0 | 1512 | maximum charge; primer: CCI 350 Magnum |
![]() | 240 | Speer Mag JHP, Mag GDHP, Mag GDSP or Mag JSP | 22.0 | 1344 | start charge; primer: CCI 350 Magnum |
![]() | 240 | Speer Mag JHP, Mag GDHP, Mag GDSP or Mag JSP | 24.0 | 1420 | maximum charge; primer: CCI 350 Magnum |
![]() | 270 | Speer Mag GDSP | 18.5 | 1198 | start charge; primer: CCI 350 Magnum |
![]() | 270 | Speer Mag GDSP | 20.5 | 1283 | maximum charge; primer: CCI 350 Magnum |
![]() | 300 | Speer Mag UCSP | 20.2 | 1038 | start charge; primer: CCI 350 Magnum; for revolvers only; crimp in rear cannelure |
![]() | 300 | Speer Mag UCSP | 22.5 | 1187 | maximum charge; primer: CCI 350 Magnum; for revolvers only; crimp in rear cannelure |
(Handgun) Speer Reloading Manual #14 max. case length: 1.285"; trim-to length: 1.275"; max cart. OAL: 1.610"; RCBS shell holder: #18; cart. case: Speer; primer: CCI 300 (except where otherwise specified in remarks); test firearm: Ruger Redhawk; barrel length: 7.5"; NOTE: The 225-grain SWC GC and 250-grain K bullets were cast in RCBS moulds; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 270 | H&G 326 | 23.8 | 1,430 | primer: CCI 350 Mag.; energy (ft-lbs): 1,225 |
![]() | 270 | H&G 326 | 24.2 | 1,445 | primer: CCI 350 Mag.; energy (ft-lbs): 1,250 |
![]() | 300 | H&G 328 | 20.9 | 1,330 | primer: CCI 350 Mag.; energy (ft-lbs): 1,176 |
![]() | 300 | H&G 328 | 21.7 | 1,360 | primer: CCI 350 Mag.; energy (ft-lbs): 1,230 |
Heavy Cast Bullets | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 180 | Hornady XTP | 29.0 | 1714 | start load; COL: 1.600"; 21,800 cup |
![]() | 180 | Hornady XTP | 31.5 | 1896 | max load; COL: 1.600"; 29,900 cup |
![]() | 200 | Nosler JHP | 27.5 | 1708 | start load; bullet diam.: .429"; COL: 1.600"; 29,000 cup |
![]() | 200 | Nosler JHP | 28.5 | 1806 | max load; bullet diam.: .429"; COL: 1.600"; 37,800 cup |
![]() | 210 | Sierra JHC | 26.0 | 1615 | start load; COL: 1.600"; 29,900 cup |
![]() | 210 | Sierra JHC | 27.0 | 1665 | max load; COL: 1.600"; 31,100 cup |
![]() | 225 | Speer JHP | 23.0 | 1468 | start load; bullet diam.: .429"; COL: 1.575"; 25,600 cup |
![]() | 225 | Speer JHP | 25.0 | 1617 | max load; bullet diam.: .429"; COL: 1.575"; 36,300 cup |
![]() | 240 | Nosler JHP | 23.0 | 1413 | start load; bullet diam.: .429"; COL: 1.600"; 25,200 cup |
![]() | 240 | Nosler JHP | 24.0 | 1522 | max load; bullet diam.: .429"; COL: 1.600"; 36,200 cup |
![]() | 240 | Speer GDSP | 19.5 | 1295 | start load; bullet diam.: .429"; COL: 1.600"; 29,300 cup |
![]() | 240 | Speer GDSP | 21.5 | 1421 | max load; bullet diam.: .429"; COL: 1.600"; 37,700 cup |
![]() | 280 | Swift JHP | 18.5 | 1214 | start load; COL: 1.700"; 27,000 cup |
![]() | 280 | Swift JHP | 20.5 | 1342 | max load; COL: 1.700"; 36,100 cup |
![]() | 300 | Hornady XTP | 18.0 | 1266 | start load; COL: 1.600"; 35,100 cup |
![]() | 300 | Hornady XTP | 19.0 | 1325 | max load; COL: 1.600"; 38,800 cup |
![]() | 325 | Beartooth Bullets LFN GC | 20.0 | 1264 | start load; COL: 1.730"; 30,800 cup |
![]() | 325 | Beartooth Bullets LFN GC | 22.0 | 1368 | max load; COL: 1.730"; 38,100 cup |
![]() | 330 | Beartooth Bullets LFN GC | 19.0 | 1239 | start load; COL: 1.730"; 30,200 cup |
![]() | 330 | Beartooth Bullets LFN GC | 20.8 | 1350 | max load; COL: 1.730"; 38,800 cup |
![]() | 355 | Beartooth Bullets LFN GC | 17.5 | 1168 | start load; COL: 1.710"; 29,300 cup |
![]() | 355 | Beartooth Bullets LFN GC | 18.8 | 1245 | max load; COL: 1.710"; 38,000 cup |
Hodgdon Pistol Data - Winchester Powder Case: Winchester; barrel length: 8.275"; twist: 1:20"; trim length: 1.280"; primer: Remington 2 1/2; bullet diam.: .430" (except where otherwise specified in remarks). NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 240 | Jacketed | 24.0 | 1430 | never exceed; compressed; min OAL: 1.535; 38,000 cup |
![]() | 240 | Lead | 25.0 | 1560 | never exceed; compressed; min OAL: 1.535; 37,500 cup |
Lee Precision Data Large pistol primer. CAUTION: With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 200 | Barnes XPB | 23.0 | 1,394 | |
![]() | 200 | Barnes XPB | 24.0 | 1,585 | maximum load |
![]() | 225 | Barnes XPB | 21.0 | 1,276 | not for use in 1:38 twist barrels |
![]() | 225 | Barnes XPB | 22.0 | 1,468 | not for use in 1:38 twist barrels; maximum load |
(Pistol) Barnes Reloading Manual #3 case: Remington; parent case: none; primer: Win Large Pistol; trim to: 1.275"; barrel: 10"; XLC Coated X-Bullet data cannot be used with other bullets, including non-coated X-Bullets; maximum loads should be used with caution - Always Start With Minimum Loads | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 240 | Barnes Solid | 21.0 | 1252 | start load |
![]() | 240 | Barnes Solid | 23.0 | 1365 | maximum load |
![]() | 250 | Barnes Original | 21.0 | 1223 | start load |
![]() | 250 | Barnes Original | 23.0 | 1351 | maximum load |
![]() | 265 | Barnes Solid | 19.0 | 1260 | start load |
![]() | 265 | Barnes Solid | 21.5 | 1336 | maximum load |
![]() | 275 | Barnes Original | 19.5 | 1247 | start load |
![]() | 275 | Barnes Original | 20.5 | 1322 | maximum load |
![]() | 300 | Barnes Original | 18.0 | 1161 | start load |
![]() | 300 | Barnes Original | 20.0 | 1294 | maximum load |
Revolver - Barnes Reloading Manual #1 COAL: 1.604"; primers: WLP; brass: Midway USA | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 240 | Hornady XTP/HP | 24.0 | 1,344 | primer: WLP |
Ruger Blackhawk Flattop Barrel length in firearm used was 6 1/2 inches. Temperature during field tests was 88 degrees Fahrenheit. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 200 | Speer JHP | 26.0 | 1888 | start charge; primer: CCI 350 Magnum |
![]() | 200 | Speer JHP | 28.0 | 2028 | maximum charge; primer: CCI 350 Magnum |
![]() | 210 | Speer GDHP | 25.5 | 1893 | start charge; primer: CCI 350 Magnum |
![]() | 210 | Speer GDHP | 27.5 | 2009 | maximum charge; primer: CCI 350 Magnum |
![]() | 240 | Speer JHP, GDHP, GDSP or JSP | 22.0 | 1625 | start charge; primer: CCI 350 Magnum |
![]() | 240 | Speer JHP, GDHP, GDSP or JSP | 24.0 | 1734 | maximum charge; primer: CCI 350 Magnum |
![]() | 270 | Speer GDSP | 18.5 | 1418 | start charge; primer: CCI 350 Magnum |
![]() | 270 | Speer GDSP | 20.5 | 1551 | maximum charge; primer: CCI 350 Magnum |
![]() | 300 | Speer UCSP | 18.9 | 1337 | start charge; primer: CCI 350 Magnum; seat to front cannelure for rifles |
![]() | 300 | Speer UCSP | 21.0 | 1499 | maximum charge; primer: CCI 350 Magnum; seat to front cannelure for rifles |
Speer Reloading Manual #14 max. case length: 1.285"; trim-to length: 1.275"; max cart. OAL: 1.610"; RCBS shell holder: #18; cart. case: Winchester; primer: CCI 300 (except where otherwise specified in remarks); test firearm: Marlin M1894; barrel length: 20"; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 180 | Sierra JHC | 30.0 | 1,439 | S&W M-29, 4-inch barrel; case: SV; consistent and accurate |
![]() | 180 | Sierra JHC | 30.0 | 1,638 | Ruger Super Blackhawk, 7 1/2-inch barrel; case: SV; consistent and accurate |
![]() | 200 | Hornady HP | 26.7 | 1,327 | S&W M-29, 4-inch barrel; case: WW; most accurate, powder little too slow |
![]() | 200 | Hornady HP | 26.7 | 1,481 | Ruger Super Blackhawk, 7 1/2-inch barrel; case: WW; most accurate, powder little too slow |
![]() | 225 | Speer HP | 24.0 | 1,244 | S&W M-29, 4-inch barrel; case: SV; extremely sensitive to charge var. |
![]() | 225 | Speer HP | 24.0 | 1,509 | Ruger Super Blackhawk, 7 1/2-inch barrel; case:SV; extremely sensitive to charge var. |
![]() | 236 | Norma HP | 23.0 | 1,242 | S&W M-29, 4-inch barrel; case: WW; extremely accurate, average sensitivity |
![]() | 236 | Norma HP | 23.0 | 1,351 | Ruger Super Blackhawk, 7 1/2-inch barrel; case: WW; extremely accurate, average sensitivity |
![]() | 240 | Speer Mag. SP | 23.5 | 1,212 | S&W M-29, 4-inch barrel; case: RP; inconsistent |
![]() | 240 | Speer Mag. SP | 23.5 | 1,340 | Ruger Super Blackhawk, 7 1/2-inch barrel; case: RP; inconsistent |
![]() | 240 | Sierra JHC | 24.0 | 1,274 | S&W M-29, 4-inch barrel; case: RP; best all-around load, average sensitivity |
![]() | 240 | Sierra JHC | 24.0 | 1,451 | Ruger Super Blackhawk, 7 1/2-inch barrel; case: RP; best all-around load, average sensitivity |
![]() | 255 | Lead SWC 429244GC | 23.0 | 1,195 | S&W M-29, 4-inch barrel; case: WW; consistent |
![]() | 255 | Lead SWC 429244GC | 23.0 | 1,325 | Ruger Super Blackhawk, 7 1/2-inch barrel; case: WW; consistent |
W-296 Powder All loads with CCI 350 primers. Velocities taken on an Oehler M10 Chronograph; 7 1/2 feet instrumental converted to muzzle velocity; average temperature 63 degrees. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 180 | Hornady XTP | 31.5 | 1,896 | col: 1.600"; 29,900 cup |
![]() | 200 | Nosler Jacketed Hollow Point | 28.5 | 1,806 | col: 1.600"; 37,800 cup |
![]() | 210 | Sierra Jacketed Hollow Cavity | 27.0 | 1,665 | col: 1.600"; 31,100 cup |
![]() | 225 | Speer Jacketed Hollow Point | 25.0 | 1,617 | col: 1.575"; 36,300 cup |
![]() | 240 | Nosler Jacketed Hollow Point | 24.0 | 1,522 | col: 1.600"; 36,200 cup |
![]() | 270 | Speer Gold Dot Soft Point | 21.5 | 1,421 | col: 1.600"; 37,700 cup |
![]() | 280 | Swift Jacketed Hollow Point | 20.5 | 1,342 | col: 1.700"; 36,100 cup |
![]() | 300 | Hornady XTP | 19.0 | 1,325 | col: 1.600"; 38,800 cup |
![]() | 325 | BTB Lead Flat Nose Gas Check | 22.0 | 1,368 | col: 1.730"; 38,100 cup |
![]() | 330 | BTB Lead Flat Nose Gas Check | 20.8 | 1,350 | col: 1.730"; 38,800 cup |
![]() | 355 | BTB Lead Flat Nose Gas Check | 18.8 | 1,245 | col: 1.710"; 38,000 cup |
Winchester Pistol Data case: Winchester; BBL: 8.275"; PR: Remington 2 1/2; NEVER exceed loads listed | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 240 | Nosler Sporting Handgun Revolver JHP or JSP | 23.8 | 1450 | max; compressed load |
![]() | 240 | Nosler Sporting Handgun Revolver JHP or JSP | 23.3 | 1410 | compressed load |
![]() | 240 | Nosler Sporting Handgun Revolver JHP or JSP | 22.8 | 1370 | compressed load; most accurate load tested |
Handgun Using 240 GR Nosler Bullets Handgun; case: Winchester; primer: WLP; barrel length/make: 8.25" Douglas; twist: 1-20"; bullets: 240 GR Nosler Sporting Handgun Revolver JHP or JSP; OACL: 1.580"; maximum OACL: 1.610". Use Maximum Loads with Caution | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 300 | Nosler Sporting Handgun Revolver JHP | 21.0 | 1344 | max compressed load |
![]() | 300 | Nosler Sporting Handgun Revolver JHP | 20.5 | 1311 | compressed load |
![]() | 300 | Nosler Sporting Handgun Revolver JHP | 20.0 | 1278 | compressed load; most accurate load tested |
Handgun Using 300 GR Nosler Bullets Handgun; case: Winchester; primer: WLP; barrel length/make: 8.25" Douglas; twist: 1-20"; bullets: 300 GR Nosler Sporting Handgun Revolver JHP; OACL: 1.580"; maximum OACL: 1.610". Use Maximum Loads with Caution | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 240 | Nosler | 23.8 | 1,450 | maximum load; compressed load |
![]() | 240 | Nosler | 23.3 | 1,410 | compressed load |
![]() | 240 | Nosler | 22.8 | 1,370 | compressed load; most accurate load tested |
240 Grain - Handgun Using Nosler Bullets handgun: barrel: Douglas, length: 8.25", twist: 1-20"; case: Winchester; primer: Win. WLP; maximum SAAMI overall cartridge length: 1.610"; bullets: Nosler Sporting Handgun Jacketed Hollow Point or Sporting Handgun Jacketed Soft Point; use maximum loads with caution | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 210 | Cast #429215 gas check | 25.5 | 1340 | sugg. start load; 1.645" OAL; primer: CCI 350 Magnum; 29,500 cup |
![]() | 210 | Cast #429215 gas check | 27.0 | 1508 | max load; compressed powder charge; primer: CCI 350 Magnum; 36,400 cup; 1.645 OAL |
![]() | 255 | Cast #429244 gas check | 22.5 | 1150 | sugg. start load; 1.680" OAL; primer: CCI 350 Magnum; 33,400 cup |
![]() | 255 | Cast #429244 gas check | 23.5 | 1223 | max load; 1.680" OAL; primer: CCI 350 Magnum 37,800 cup |
![]() | 300 | Cast #429650 gas check | 18.2 | 982 | sugg. start load; 1.700" OAL; primer: CCI 350 Magnum; 34,500 cup |
![]() | 300 | Cast #429650 gas check | 19.0 | 1064 | max load; 1.700" OAL; primer: CCI 350 Magnum; 38,300 cup |
Cast Bullet Handgun Data (Lyman Reloading Handbook 49th Edition) cases: Remington; trim-to length: 1.275"; primers: CCI 300 (except where otherwise specified in remarks); primer size: Large Pistol, Std. & Magnum; Lyman shell holder: No. 7; cast bullets used sized to .429" dia.; firearm used: Universal Receiver; barrel length: 4"; twist: 1-20"; groove dia.: .429" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 240 | Hornady XTP | 24.0 | 1,344 | primer: Federal 155 |
Full-Power Loads All Smith & Wesson Models 29, 629 and 329PD. A Smith & Wesson (pre-29) .44 Magnum revolver with a 6 1/2-inch barrel used to test loads. Winchester and Starline cases used throughout. These loads DO NOT exceed SAAMI recommended pressure limits of 36,000 psi, but they should be used sparingly in guns produced before 1988 and avoid using jacketed bullet loads in the early four-and five-screw guns. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 180 | Sierra Jacketed HC | 29.0 | 1498 | sugg. start load; primer: CCI 350 Magnum; 32,400 cup |
![]() | 180 | Sierra Jacketed HC | 30.0 | 1563 | max load; primer: CCI 350 Magnum; 36,700 cup |
![]() | 200 | Hornady Jacketed HP | 27.0 | 1432 | sugg. start load; primer: CCI 350 Magnum; 31,700 cup |
![]() | 200 | Hornady Jacketed HP | 28.3 | 1493 | max load; primer: CCI 350 Magnum; 37,000 cup |
![]() | 210 | Winchester Jacketed Silvertip | 26.6 | 1279 | sugg. start load; 1.590" OAL; primer: CCI 350 Magnum; 31,400 cup |
![]() | 210 | Winchester Jacketed Silvertip | 27.5 | 1344 | max load; 1.590" OAL; primer: CCI 350 Magnum; 36,400 cup |
![]() | 225 | Speer Jacketed HP | 24.0 | 1112 | sugg. start load; primer: CCI 350 Magnum; 27,600 cup |
![]() | 225 | Speer Jacketed HP | 25.0 | 1235 | max load; primer: CCI 350 Magnum; 33,100 cup |
![]() | 240 | Sierra Jacketed HC | 22.5 | 1168 | sugg. start load; primer: CCI 350 Magnum; 34,700 cup |
![]() | 240 | Sierra Jacketed HC | 23.5 | 1264 | max load; primer: CCI 350 Magnum; 39,200 cup |
![]() | 240 | Speer Jacketed HP | 23.0 | 1193 | sugg. start load; primer: CCI 350 Magnum; 34,000 cup |
![]() | 240 | Speer Jacketed HP | 24.0 | 1292 | max load; primer: CCI 350 Magnum; 38,500 cup |
![]() | 265 | Hornady Jacketed FP | 21.1 | 1092 | sugg. start load; primer: CCI 350 Magnum; 35,000 cup |
![]() | 265 | Hornady Jacketed FP | 22.0 | 1150 | max load; primer: CCI 350 Magnum; 38,700 cup |
![]() | 270 | Speer Jacketed GDSP | 20.9 | 1053 | sugg. start load; 1.585" OAL; primer: CCI 350 Magnum; 31,400 cup |
![]() | 270 | Speer Jacketed GDSP | 21.6 | 1108 | max load; 1.585" OAL; primer: CCI 350 Magnum; 36,100 cup |
![]() | 300 | Sierra Jacketed SP | 19.8 | 892 | sugg. start load; 1.720" OAL; primer: CCI 350 Magnum; 32,400 cup |
![]() | 300 | Sierra Jacketed SP | 20.7 | 966 | max load; 1.720" OAL; primer: CCI 350 Magnum; 36,800 cup |
Lyman Reloading Handbook 49th Edition cases: Remington; trim-to length: 1.275"; primers: CCI 300 (except where otherwise specified in remarks); primer size: Large Pistol, Std. & Magnum; Lyman shell holder: No. 7; firearm used: Universal Receiver; barrel length: 4"; twist: 1-20"; groove dia.: .429"; 1.610" OAL (except where otherwise specified in remarks) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 180 | Hornady HP | 28.0 | 1545 | overall loaded length (inches): 1.610; group (inches): 1.25 |
![]() | 240 | Sierra JHC | 24.0 | 1442 | overall loaded length (inches): 1.610; group (inches): 1.50 |
![]() | 250 | Sierra FPJ | 24.0 | 1445 | overall loaded length (inches): 1.600; group (inches): 1.25 |
Handloads CCI 350 primers. All ammunition was tested in five-shot groups at 25 yards with the handgun in a Ransom Rest. Loads used Remington cases. Velocities tracked with an Oehler Model 35P chronograph with an air temperature of approximately 50 degrees. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 180 | Sierra JHC | 28.0 | 1,601 | case expansion maximum; tie for second-best accuracy in revolver |
![]() | 200 | Speer JHP | 27.0 | 1,504 | case expansion near maximum; accurate |
![]() | 210 | Sierra JHC | 26.0 | 1,525 | case expansion near maximum; most accurate in carbine; best all-around load |
![]() | 220 | Sierra FN (silhouette) | 26.0 | 1,486 | case expansion maximum; third most accurate in revolver |
![]() | 240 | Hornady JHP | 24.0 | 1,399 | case expansion near maximum; fourth most accurate in carbine |
![]() | 240 | Speer Magnum HP | 24.5 | 1,414 | case expansion maximum; accurate |
in 7 1/2 inch Revolver | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 180 | Sierra | 31.0 | 1,988 | |
![]() | 200 | Speer | 28.5 | 1,857 | |
![]() | 225 | Speer | 27.0 | 1,749 | |
![]() | 240 | Hornady | 26.0 | 1,621 | |
![]() | 240 | Lyman 429421 | 26.0 | 1,652 | |
![]() | 252 | Lee 429255 | 25.5 | 1,697 | |
![]() | 265 | Hornady | 24.0 | 1,594 | |
in a 10-inch Barrel Contender, 10-inch barrel; Norma cases; CCI 250 primers; temperature ninety-two degrees Fahrenheit; humidity eighty-seven percent; Oehler Model 33 Chronotach; velocity instrumental at fifteen feet, converted to muzzle velocity. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 180 | Sierra | 31.0 | 1,520 | |
![]() | 200 | Speer | 28.5 | 1,357 | |
![]() | 225 | Speer | 27.0 | 1,442 | |
![]() | 240 | Hornady | 26.0 | 1,301 | |
![]() | 240 | Lyman 429421 | 26.0 | 1,310 | |
![]() | 252 | Lee 429255 | 25.5 | 1,283 | |
![]() | 265 | Hornady | 24.0 | 1,281 | |
in a 4-inch Barrel Smith & Wesson Model 29 4-inch barrel; Norma cases; CCI 250 primers; temperature ninety-two degrees Fahrenheit; humidity eighty-seven percent; Oehler Model 33 Chronotach; velocity instrumental at fifteen feet, converted to muzzle velocity. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 200 | Speer JHP | 28.0 | 1,313 | primer: CCI 350; group avg.: 2.46; mediocre accuracy; some unburned powder - highest velocity of loads tested |
![]() | 240 | Sierra JHC | 24.0 | 1,254 | primer: Winchester 7M-111; group avg.: 1.62; most accurate load; highest velocity of heavy-bullet handloads |
in a 5-Inch Super Blackhawk All loads in Remington brass. Velocities taken on an Oehler Model 32 Chronotach with Model 61 Skyscreens; 10 feet instrumental converted to muzzle velocity. Average temperature, 44 degrees. Test gun was a Mag-na-port Mark V (modified Super Blackhawk) with 5-inch barrel. Group Avg. = average of three 5-shot groups, 25 yards, arm rest. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 200 | Nosler hollowpoint | 26.5 | 1302 | |
![]() | 200 | Speer Gold Dot hollowpoint | 26.5 | 1217 | group (inches): 1.80 |
![]() | 240 | Hornady HP-XTP | 24.0 | 1255 | group (inches): 1.86 |
![]() | 250 | Lyman 429244 GC | 20.0 | 1084 | group (inches): 2.32; primer: Winchester Large Pistol |
![]() | 250 | Lyman 429244 GC | 22.0 | 1205 | group (inches): 2.15; primer: Winchester Large Pistol |
![]() | 250 | Nosler Partition | 20.5 | 1062 | group (inches): 2.14 |
![]() | 300 | Speer softpoint | 21.0 | 1086 | group (inches): 1.12 |
Load Data CCI 350 Magnum Pistol primers used except where otherwise specified in remarks; all loads used Federal cases and were fired through a Ruger Super Blackhawk with a 5.5-inch barrel; all groups were five shots fired at 25 yards | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 240 | Semi Wad Cutter | 22.6 | 1,357 | starting load; OAL: 1.605 |
![]() | 240 | Semi Wad Cutter | 24.3 | 1,515 | maximum load; OAL: 1.605 |
![]() | 300 | 20.2 | 1,308 | maximum load; OAL: 1.610 | |
Silhouette Loads (Oregon Trail Bullet Handgun Data) test gun: Ruger Super Red Hawk, 9 1/2", WLP; do not reduce H110 or 296 maximum loads more than 3% to start; use WLP for all 44 Magnum pistol loads; do not exceed maximum loads; never reduce stated overall lengths | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 240 | Hornady HP-XTP or CL-SIL | 20.7 | 1131 | |
![]() | 240 | Hornady HP-XTP or CL-SIL | 22.0 | 1170 | |
![]() | 240 | Hornady HP-XTP or CL-SIL | 23.3 | 1240 | |
![]() | 240 | Hornady HP-XTP or CL-SIL | 23.9 | 1300 | |
![]() | 240 | Hornady HP-XTP or CL-SIL | 24.5 | 1351 | maximum load |
Revolver Using 240 GR Hornady Bullets Gun: Ruger New Model Blackhawk (Bisley); barrel length: 5 1/2-inches; case: Starline; primer: Winchester Large Pistol; bullet diameter: .430"; Hornady HP-XTP and CL-SIL COAL: 1.600"; SWC-HP and SWC COAL: 1.610"; maximum COAL: 1.610"; maximum case length: 1.285"; trim to length: 1.275". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 265 | Hornady FP | 19.7 | 1098 | |
![]() | 265 | Hornady FP | 20.9 | 1161 | |
![]() | 265 | Hornady FP | 22.2 | 1212 | |
![]() | 265 | Hornady FP | 22.9 | 1279 | |
![]() | 265 | Hornady FP | 23.5 | 1340 | maximum load |
Revolver (Using 265 GR Hornady Bullets) Gun: Ruger New Model Blackhawk (Bisley); barrel length: 5 1/2-inches; case: Starline; primer: Winchester Large Pistol; bullet diameter: .430"; maximum COAL: 1.610"; maximum case length: 1.285"; trim to length: 1.275"; COAL: 1.610". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 300 | Hornady HP-XTP | 16.8 | 997 | Do Not Reduce |
![]() | 300 | Hornady HP-XTP | 17.6 | 1045 | |
![]() | 300 | Hornady HP-XTP | 18.3 | 1077 | |
![]() | 300 | Hornady HP-XTP | 19.1 | 1120 | |
![]() | 300 | Hornady HP-XTP | 19.9 | 1149 | maximum load |
Revolver Using 300 GR Hornady Bullets Gun: Ruger New Model Blackhawk (Bisley); barrel length: 5 1/2-inches; case: Starline; primer: Winchester Large Pistol; bullet diameter: .430"; maximum COAL: 1.600"; maximum case length: 1.285"; trim to length: 1.275"; COAL: 1.610". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 225 | Hornady FTX | 20.4 | 1169 | |
![]() | 225 | Hornady FTX | 21.2 | 1217 | maximum load |
Revolver using 225 GR Hornady FTX Bullets Gun: Ruger New Model Blackhawk (Bisley); barrel length: 5 1/2-inches; case: Starline; primer: Winchester Large Pistol; bullet diameter: .430"; COAL: 1.645"; case trim to length: 1.255". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 240 | Hornady XTP | 24.0 | 1,805 | rifle load; primer: CCI 350; extreme spread (fps): 33 |
![]() | 240 | Hornady XTP | 24.0 | 1,421 | revolver load; primer: CCI 350; extreme spread (fps): 29 |
Rifle & Revolver Handloads The .44 Magnum loads were shot from a Marlin 1894 with a 20-inch barrel and a 5 1/2-inch barreled Ruger Super Blackhawk. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 240 | Sierra FPJ | 24.0 | 1,444 | group (inches): 1 1/8 |
![]() | 240 | Speer MHP | 24.5 | 1,436 | group (inches): 1 1/4 |
Ruger Super Redhawk Loads All groups fired from a Ransom Rest at 25 yards. Velocities clocked on a Shooting Chrony chronograph.Handloads were tested with temperatures around 70 degrees. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 200 | Hornady HP-XTP | 26.0 | 1489 | |
![]() | 200 | Hornady HP-XTP | 26.7 | 1530 | |
![]() | 200 | Hornady HP-XTP | 27.4 | 1588 | |
![]() | 200 | Hornady HP-XTP | 28.1 | 1651 | |
![]() | 200 | Hornady HP-XTP | 28.8 | 1698 | maximum load |
![]() | 240 | Hornady HP-XTP or CL-SIL | 24.0 | 1438 | |
![]() | 240 | Hornady HP-XTP or CL-SIL | 24.5 | 1476 | |
![]() | 240 | Hornady HP-XTP or CL-SIL | 25.0 | 1529 | |
![]() | 240 | Hornady HP-XTP or CL-SIL | 25.5 | 1566 | maximum load |
![]() | 265 | Hornady FP | 21.0 | 1281 | |
![]() | 265 | Hornady FP | 21.5 | 1313 | |
![]() | 265 | Hornady FP | 22.1 | 1361 | |
![]() | 265 | Hornady FP | 22.6 | 1399 | |
![]() | 265 | Hornady FP | 23.2 | 1444 | maximum load |
![]() | 300 | Hornady HP-XTP | 17.7 | 1081 | |
![]() | 300 | Hornady HP-XTP | 18.2 | 1118 | |
![]() | 300 | Hornady HP-XTP | 18.8 | 1170 | |
![]() | 300 | Hornady HP-XTP | 19.3 | 1221 | |
![]() | 300 | Hornady HP-XTP | 19.9 | 1266 | maximum load |
TC Using Hornady Bullets Gun: Thompson/Center G-2 Contender; barrel length: 10 inches; case: Starline; primer: Winchester Large Pistol; bullet diameter: .430"; 200, 240 & 300 GR Hornady HP-XTP and 240 GR CL-SIL COAL: 1.600"; 265 Hornady FP COAL: 1.610"; maximum COAL: 1.610"; maximum case length: 1.285"; trim to length: 1.275". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 260 | JDJ | 23.0 | 1,482 | 10-inch Ruger |
![]() | 310 | JDJ | 21.2 | 1,472 | 10-inch Ruger |
with JDJ Bullets |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 240 | Barnes Solid | 31.0 | 1,494 | |
![]() | 240 | Barnes Solid | 33.0 | 1,590 | maximum load |
![]() | 250 | Barnes | 29.0 | 1,397 | |
![]() | 250 | Barnes | 32.0 | 1,542 | maximum load |
![]() | 265 | Barnes Solid | 29.0 | 1,398 | |
![]() | 265 | Barnes Solid | 31.0 | 1,498 | maximum load |
![]() | 275 | Barnes | 27.5 | 1,341 | |
![]() | 275 | Barnes | 30.5 | 1,470 | maximum load |
![]() | 300 | Barnes | 26.0 | 1,253 | |
![]() | 300 | Barnes | 29.0 | 1,397 | maximum load |
Barnes Reloading Manual #1 Source: Barnes Bullets Reloading Manual #1 |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 250 | Speer Colt GDHP | 19.0 | 1118 | start charge; primer: CCI 350 Magnum |
![]() | 250 | Speer Colt GDHP | 21.0 | 1203 | maximum charge; primer: CCI Magnum |
![]() | 260 | Speer JHP | 19.0 | 1096 | start charge; primer: CCI 350 Magnum |
![]() | 260 | Speer JHP | 20.5 | 1183 | maximum charge; primer: CCI 350 Magnum |
![]() | 300 | Speer UCSP | 20.7 | 1084 | start charge; primer: CCI 350 Magnum; seat bullet to REAR cannelure and use a neckdown crimp |
![]() | 300 | Speer UCSP | 23.0 | 1193 | maximum charge; primer: CCI 350 Magnum; seat bullet to REAR cannelure and use a neckdown crimp |
(Ruger & Contender Only ) Speer Reloading Manual #14 max. case length: 1.285"; trim-to length: 1.275"; max cart. OAL: 1.600"; RCBS shell holder: #20; cart. case: Winchester; primer: CCI 300 (except where otherwise specified in remarks); test firearm: Ruger Blackhawk; barrel length: 7.5"; maximum loads should be used with CAUTION; NOTE: Do not use in any other make or model firearm. IMPORTANT SAFETY NOTE: Since Speer #14 Manual was published, Ruger has replaced the original Vaquero revolver with a smaller version called the New Vaquero. Ruger has advised the industry that the New Vaquero must not be fired with loads exceeding industry pressure standards (14,000 psi). If loading for a New Vaquero, use the standard pressure data in the .45 Colt Handgun Speer Data. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 250 | Hornady XTP | 27.5 | 1,448 | velocity spread: 39 fps; 25-yard group: 1.3 inches |
![]() | 300 | Speer PSP | 23.0 | 1,211 | velocity spread: 30 fps; 25-yard group: 1.8 inches |
+P Handloads The .45 Colt +P handloads are for Ruger, Freedom Arms and Colt Anaconda only! Test gun was a Ruger Blackhawk with a 6-inch barrel. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 250 | Hornady JHP/XTP | 27.5 | 1,902 | rifle load; primer: Federal 155; extreme spread (fps): 31 |
![]() | 250 | Hornady JHP/XTP | 27.5 | 1,459 | revolver load; primer: Federal 155; extreme spread (fps): 33 |
+P Rifle & Revolver Handloads The .45 Colt +P loads were shot in a Winchester Model 94 with a 20-inch barrel and a Ruger Blackhawk with a 6-inch barrel. For modern Marlin, Winchester and Browning leverguns and Ruger and Freedom Arms revolvers only! | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 250 | Nosler Sporting Handgun Jacketed Hollow Point | 25.0 | 1420 | maximum load |
![]() | 250 | Nosler Sporting Handgun Jacketed Hollow Point | 24.5 | 1382 | most accurate load tested |
![]() | 250 | Nosler Sporting Handgun Jacketed Hollow Point | 24.0 | 1346 | |
Ruger & TC Contender Using Nosler Bullets Case: Winchester; primer: WLP; barrel length/make: 12" Contender; twist: 1-16"; bullets: 250 GR Nosler Sporting Handgun Revolver JHP; OACL: 1.590"; maximum OACL: 1.600". Use Maximum Loads with Caution | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 225 | Speer JHP | 30.0 | 1,725 | ES: 27; NT |
![]() | 240 | Sierra JHP | 28.0 | 1,667 | ES: 39; 1 1/8 |
![]() | 260 | Speer JHP | 26.5 | 1,530 | ES: 20; 1 9/16 |
![]() | 240 | Sierra JHP in Federal cases | 28.0 | 1,695 | ES: 9; 1 1/2 |
![]() | 240 | Sierra JHP in Federal cases | 29.0 | 1,750 | ES: 10; 1 5/16 |
![]() | 260 | Speer JHP in Federal cases | 26.5 | 1,592 | ES: 8; NT |
Contender loads Warning! Under NO CIRCUMSTANCES should these loads be used in any gun other than the Contender. Notes: .45 Colt, Contender 10-in. barrel; W-W cases; CCI 350 magnum primers; Oehler 34/50 chronograph system; velocity instrumental at 15 ft converted to muzzle velocity; temperature - 70 degrees. None of the loads with W-W cases shows as much pressure as the .45 WM loads, and the heaviest loads with Federal cases are about at same level as the .45 WM loads. NT - not tried for accuracy. All groups fired at 22 yards. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 250 | Hornady XTP | 26.5 | 1,280 | old .458-inch cylinder; group (inches): 2.7 |
![]() | 250 | Hornady XTP | 26.5 | 1,321 | new .452-inch cylinder; group (inches): .85 |
Data for Colt Anaconda barrel length: 4 inches, Starline brass used throughout. CCI 300 primers used, except CCI 350s used with H-110 and W-296. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 255 | Semi Wad Cutter | 18.9 | 831 | starting load; OAL: 1.595 |
![]() | 255 | Semi Wad Cutter | 19.8 | 907 | maximum load; OAL: 1.595 |
![]() | 300 | Flat Point | 17.0 | 855 | maximum load; OAL: 1.570 |
For Ruger (Oregon Trail Handgun Data) silhouette loads; test gun: Vaquero 4 3/4", WLP; Do not exceed maximum loads. Never reduce stated overall lengths. All 300 Flat Point are maximum loads; reduce 300 charges 3% to start; CAUTION The 300 grain loads are intended for Ruger revolvers and T/C pistols only!; These loads will produce higher velocities when fired in long-barreled revolvers and pistols for which they are intended. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 315 | NEI SWC | 21.0 | 1,116 | primer: F155 |
in a Dan Wesson Model 45 (hunting and silhouette loads) Dan Wesson Model 45 eight-inch barrel. All loads chronographed with an Oehler Model 33 Chronotach. Instrumental velocities corrected to muzzle velocities, fired at 30 to 50 degrees Fahrenheit. All groups fired in five-shot strings at 25 yards converted to minutes of angle. Federal cases used in all loads. None of the loads listed showed any signs of excessive pressures in the test revolver. The Hunting and Silhouette loads should not be fired in weaker revolvers like the Colt or Smith & Wesson. Use them only in the Thompson/Center Contender, the Ruger Blackhawk or the Dan Wesson Model 45. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 315 | NEI SWC | 22.0 | 1,003 | primer: F155; extreme spread (fps): 26; 9 MOA |
in a Ruger Blackhawk Ruger Blackhawk with 4 5/8-inch barrel. All loads chronographed on an Oehler Model 33 Chronotach with Skyscreens III. Instrumental velocities corrected to muzzle velocities at 20 to 40 degrees Fahrenheit. All groups fired in five-shot strings at 25 yards and converted to minutes of angle (one inch equals approximately one MOA at 100 yards). Federal cases used in all loads. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 225 | Speer Mag HP | 24.0 | 1,158 | Maximum - Large muzzle flash - do not exceed |
![]() | 250 | Speer SWC | 21.0 | 1,088 | Maximum - Accurate H.V. lead bullet load |
in Thompson/Center Pistol Ruger Blackhawk Revolvers & Thompson/Center Pistols | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 300 | Hornady XTP-MAG or HP-XTP | 17.9 | 1060 | |
![]() | 300 | Hornady XTP-MAG or HP-XTP | 18.7 | 1103 | |
![]() | 300 | Hornady XTP-MAG or HP-XTP | 19.4 | 1176 | |
![]() | 300 | Hornady XTP-MAG or HP-XTP | 20.2 | 1219 | |
![]() | 300 | Hornady XTP-MAG or HP-XTP | 21.0 | 1272 | |
![]() | 300 | Hornady XTP-MAG or HP-XTP | 21.7 | 1324 | maximum load |
T/C & Ruger Using Hornady Bullets Gun: Thompson/Center Encore; barrel length: 12 inches; case: Starline; primer: Winchester WLP; bullet diameter: .452"; 240 and 300 GR Hornady XTP-MAG COAL: 1.655"; 250 HP-XTP COAL: 1.595"; 300 HP-XTP COAL: 1.580"; maximum COAL: 1.600"; maximum case length: 1.285"; trim to length: 1.275". |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 260 | JHP | 25.0 | 1,500 | energy: 1,300 |
Cartridges of the World All loads were developed in a Thompson/Center Contender pistol with a 10-inch barrel. These loads are not recommended for any other handgun. The 45 Winchester Magnum develops 72 percent higher velocity and 200 percent greater muzzle energy than the standard 45 Automatic and is in the same class as the 44 Magnum revolver cartridge. With its rimless case, it is a natural for use in a semi-automatic rifle. Having made this suggestion, if this ever happens, this author can claim that it was all his idea. The Wildey 45 Magnum, along with the 44 Auto Mag, the Desert Eagle and the LAR Grizzly are the only automatic pistols that truly qualify as big game handguns. The potential is there for a fine combination silhouette and hunting pistol. The price is high, and for strictly silhouette shooting, the much lower-priced Thompson/Center Contender in the same chambering might appeal to many potential buyers. The availability of commercial ammunition with hunting-type bullets would also be a factor, although there is a good variety of such bullets available to the handloader. (Cartridges of the World 9th Edition) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 200 | Hornady FMJ-C/T or HP-XTP | 25.5 | 1553 | |
![]() | 200 | Hornady FMJ-C/T or HP-XTP | 26.2 | 1607 | |
![]() | 200 | Hornady FMJ-C/T or HP-XTP | 26.9 | 1661 | |
![]() | 200 | Hornady FMJ-C/T or HP-XTP | 27.6 | 1714 | maximum load |
![]() | 250 | Hornady HP-XTP | 21.4 | 1344 | |
![]() | 250 | Hornady HP-XTP | 22.1 | 1380 | |
![]() | 250 | Hornady HP-XTP | 22.9 | 1430 | |
![]() | 250 | Hornady HP-XTP | 23.6 | 1475 | |
![]() | 250 | Hornady HP-XTP | 24.4 | 1530 | |
![]() | 250 | Hornady HP-XTP | 25.1 | 1571 | maximum load |
![]() | 300 | Hornady HP-XTP | 16.7 | 1072 | |
![]() | 300 | Hornady HP-XTP | 17.4 | 1113 | |
![]() | 300 | Hornady HP-XTP | 18.1 | 1160 | |
![]() | 300 | Hornady HP-XTP | 18.8 | 1211 | |
![]() | 300 | Hornady HP-XTP | 19.5 | 1255 | maximum load |
Using Hornady Bullets Gun: Thompson/Center Contender; barrel length: 10 inches; case: Starline; primer: Winchester Large Pistol; bullet diameter: .451"; 200 GR FMJ-C/T COAL: 1.500"; 200 GR HP-XTP COAL: 1.495"; 250 & 300 GR HP-XTP COAL: 1.480"; maximum COAL: 1.575"; maximum case length: 1.198"; trim to length: 1.193". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 225 | RCBS 45-225-RN | 26.5 | 1,857 | consistently grouped 1 1/2 inches at 50 yd |
![]() | 250 | Speer | 24 | 1,700 | 3 to 4 inches at 100 yd |
cast-bullet loads Velocities represent five-shot averages, measured 10 feet from the muzzle by an Oehler Model 33 chronograph. All handloads were assembled with Winchester cases and CCI Large Pistol primers. All powder charges were weighed. Temperature 50 degrees F. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 200 | Speer JSP | 30 | 1,878 | 1/2 |
![]() | 225 | Speer JHP | 28 | 1,763 | |
![]() | 240 | Sierra JHP | 26 | 1,699 | |
![]() | 250 | Speer swaged | 25 | 1,629 | |
![]() | 260 | Speer JHP | 24.5 | 1,597 | 11/16 |
Contender loads THESE LOADS ARE NOT FOR USE IN ANY OTHER GUN EXCEPT THE CONTENDER. None was maximum in the test barrel, but are based on pressure used in W-W factory ammunition. All groups in three-shot strings with scope from bench over sandbag rest. .45 Winchester Magnum, Contender 10-in. barrel; W-W cases; CCI 350 magnum primers; Oehler 34/50 chronograph system; velocity instrumental at 15 ft converted to muzzle velocity; temperature 70 degrees. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 300 | Hornady XTP | 31.5 | 1,565 | 50,000 psi |
. . | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 250 | Barnes XPB | 28.0 | 1,719 | |
![]() | 250 | Barnes XPB | 30.0 | 1,832 | maximum load |
(Barnes Reloading Manual #3) case: Freedom Arms; parent case: .45 Colt; primer: CCI 500; trim to: 1.380"; barrel: 15"; XLC Coated X-Bullet data cannot be used with other bullets, including non-coated X-Bullets; maximum loads should be used with caution - Always Start With Minimum Loads | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 240 | Freedom Arms JHP | 36.0 | 1923 | start load; bullet diam.: .452"; COL: 1.765"; 38,800 cup |
![]() | 240 | Freedom Arms JHP | 38.2 | 2065 | max load; bullet diam.: .452"; COL: 1.765"; 51,300 cup |
![]() | 250 | Barnes X | 27.5 | 1725 | start load; bullet diam.: .451"; COL: 1.780"; 45,100 cup |
![]() | 250 | Barnes X | 28.5 | 1785 | max load; bullet diam.: .451"; COL: 1.780"; 52,300 cup |
![]() | 260 | Freedom Arms JFP | 34.0 | 1817 | start load; bullet diam.: .452"; COL: 1.765"; 37,100 cup |
![]() | 260 | Freedom Arms JFP | 36.0 | 1954 | max load; bullet diam.: .452"; COL: 1.765"; 51,600 cup |
![]() | 300 | Freedom Arms JFP | 28.5 | 1618 | start load; bullet diam.: .452"; COL: 1.775"; 44,200 cup |
![]() | 300 | Freedom Arms JFP | 30.0 | 1716 | max load; bullet diam.: .452"; COL: 1.775"; 53,700 cup |
![]() | 325 | Cast Performance LFN PB | 25.2 | 1345 | start load; bullet diam.: .452"; COL: 1.760"; 19,700 cup |
![]() | 325 | Cast Performance LFN PB | 26.0 | 1511 | max load; bullet diam.: .452"; COL: 1.760"; 34,300 cup |
![]() | 325 | Swift HP | 23.0 | 1379 | start load; bullet diam.: .451"; COL: 1.750"; 36,800 cup |
![]() | 325 | Swift HP | 26.0 | 1545 | max load; bullet diam.: .451"; COL: 1.750"; 52,600 cup |
![]() | 335 | Cast Performance LFN GC | 23.0 | 1321 | start load; bullet diam.: .452"; COL: 1.770"; 22,200 cup |
![]() | 335 | Cast Performance LFN GC | 26.0 | 1531 | max load; bullet diam.: .452"; COL: 1.770"; 41,600 cup |
![]() | 360 | Cast Performance LFN GC | 21.0 | 1265 | start load; bullet diam.: .452"; COL: 1.760"; 24,000 cup |
![]() | 360 | Cast Performance LFN GC | 24.0 | 1447 | max load; bullet diam.: .452"; COL: 1.760"; 43,400 cup |
![]() | 395 | Cast Performance LFN GC | 18.5 | 1169 | start load; bullet diam.: .452"; COL: 1.770"; 27,200 cup |
![]() | 395 | Cast Performance LFN GC | 21.0 | 1309 | max load; bullet diam.: .452"; COL: 1.770"; 43,200 cup |
Hodgdon Pistol Data Case: Freedom Arms; twist: 1:24"; primer: Winchester SR; barrel length: 9.375"; trim length: 1.380". NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 260 | Jacketed | 36.0 | 1965 | never exceed; compressed charge; min OAL: 1.765; 50,000 psi |
![]() | 300 | Jacketed | 31.5 | 1750 | never exceed; compressed charge; min OAL: 1.765; 50,000 psi |
Lee Precision Data With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. Small Rifle primer. NOTE: Industry standard cup pressure is 53,000. Some of the hard core bullet loads exceed this value. Use maximum loads with caution. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 240 | Hornady Jacketed HP Mag-XTP | 36.1 | 1695 | sugg. start load; 1.745" OAL; 45,300 cup |
![]() | 240 | Hornady Jacketed HP Mag-XTP | 38.0 | 1788 | max load; compressed powder charge; 1.745" OAL; 50,900 cup |
![]() | 250 | Barnes XPB HP | 31.0 | 1606 | sugg. start load; 1.770" OAL; 49,900 cup |
![]() | 250 | Barnes XPB HP | 32.0 | 1654 | max load; compressed powder charge; 1.770" OAL; 53,000 cup |
![]() | 300 | Hornady Jacketed HP Mag-XTP | 27.1 | 1392 | sugg. start load; 1.745" OAL; 42,800 cup |
![]() | 300 | Hornady Jacketed HP Mag-XTP | 28.0 | 1432 | max load; 1.745" OAL; 46,300 cup |
![]() | 225 | Cast #452490 gas check | 33.4 | 1611 | sugg. start load; 1.760" OAL; 41,600 cup |
![]() | 225 | Cast #452490 gas check | 34.5 | 1660 | max load; compressed powder charge; 1.760" OAL; 46,200 cup |
![]() | 325 | Cast #452651 gas check | 23.7 | 1277 | sugg. start load; 1.755" OAL; 38,800 cup |
![]() | 325 | Cast #452651 gas check | 24.5 | 1338 | max load; 1.755" OAL; 40,400 cup |
(Lyman Reloading Handbook 49th Edition) cases: Winchester; trim-to length: 1.378"; primers: CCI 450; primer size: Small Rifle, Magnum; Lyman shell holder: No. 11; firearm used: Universal Receiver; barrel length: 6"; twist: 1-24"; groove dia.: .451" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 240 | Hornady XTP-MAG | 33.9 | 1644 | |
![]() | 240 | Hornady XTP-MAG | 34.6 | 1682 | |
![]() | 240 | Hornady XTP-MAG | 35.3 | 1718 | |
![]() | 240 | Hornady XTP-MAG | 36.0 | 1773 | |
![]() | 240 | Hornady XTP-MAG | 36.7 | 1811 | maximum load |
![]() | 300 | Hornady XTP-MAG | 28.3 | 1444 | |
![]() | 300 | Hornady XTP-MAG | 29.1 | 1485 | |
![]() | 300 | Hornady XTP-MAG | 29.9 | 1517 | |
![]() | 300 | Hornady XTP-MAG | 30.7 | 1565 | |
![]() | 300 | Hornady XTP-MAG | 31.5 | 1593 | |
![]() | 300 | Hornady XTP-MAG | 32.3 | 1638 | maximum load |
Using Hornady Bullets Gun: Freedom Arms Model 83; barrel length: 7 1/2 inches; case: Starline; primer: Fed. #205; bullet diameter: .452"; COAL: 1.745"; maximum COAL: 1.765"; maximum case length: 1.383"; trim to length: 1.373". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 240 | Freedom Arms Jacketed Hollow Point | 38.2 | 2,065 | col: 1.765"; 51,300 cup |
![]() | 250 | Barnes X Bullet | 28.5 | 1,785 | col: 1.780"; 52,300 cup |
![]() | 260 | Freedom Arms Jacketed Flat Point | 36.0 | 1,954 | col: 1.765"; 51,600 cup |
![]() | 300 | Freedom Arms Jacketed Flat Point | 30.0 | 1,716 | col: 1.775"; 53,700 cup |
![]() | 325 | CPB Lead Flat Nose PB | 26.0 | 1,511 | col: 1.760"; 34,300 cup |
![]() | 325 | Swift Hollow Point | 26.0 | 1,545 | col: 1.750"; 52,600 cup |
![]() | 335 | CPB Lead Flat Nose PB | 26.0 | 1,531 | col: 1.770"; 41,600 cup |
![]() | 360 | CPB Lead Flat Nose PB | 24.0 | 1,447 | col: 1.760"; 43,400 cup |
![]() | 395 | CPB Lead Flat Nose PB | 21.0 | 1,309 | col: 1.770"; 43,200 cup |
Winchester Pistol Data case: Freedom Arms; BBL: 9.375"; PR: Winchester SR; NEVER exceed loads listed | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 300 | Speer GDHP | 29.0 | 1475 | start charge |
![]() | 300 | Speer GDHP | 31.0 | 1587 | maximum charge; compressed load |
Full Power Loads Speer Reloading Manual #14 max. case length: 1.383"; trim-to length: 1.373"; max cart. OAL: 1.765"; RCBS shell holder: #20; cart. case: Winchester; primer: CCI 400; test firearm: Freedom Arms; barrel length: 7.5"; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 260 | Nosler Partition-HG Hollow Point | 33.5 | 1,983 | maximum load; compressed load |
![]() | 260 | Nosler Partition-HG Hollow Point | 32.5 | 1,933 | compressed load |
![]() | 260 | Nosler Partition-HG Hollow Point | 31.5 | 1,882 | compressed load; most accurate load tested |
![]() | 300 | Nosler Partition-HG Protected Point | 27.5 | 1,686 | maximum load |
![]() | 300 | Nosler Partition-HG Protected Point | 26.5 | 1,606 | most accurate load tested |
![]() | 300 | Nosler Partition-HG Protected Point | 25.5 | 1,529 | |
Handgun Using Nosler Bullets handgun: barrel: T/C Encore, length: 12", twist: 1-16"; case: Winchester; primer: WSR; maximum SAAMI overall cartridge length: 1.765"; use maximum loads with caution | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 300 | Speer UCSP | 26.0 | 1298 | start charge; case: Winchester |
![]() | 300 | Speer UCSP | 28.0 | 1426 | maximum charge; case: Winchester |
Reduced Recoil Loads Speer Reloading Manual #14 max. case length: 1.383"; trim-to length: 1.373"; max cart. OAL: 1.765"; RCBS shell holder: #20; cart. case: Winchester and Starline; primer: CCI 400; test firearm: Freedom Arms; barrel length: 7.5"; NOTE: The 270 grain SAA bullets were cast in RCBS moulds; use maximum loads with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 260 | Nosler Partition | 36.0 | 1,739 | |
![]() | 300 | Hornady XTP-HP | 31.5 | 1,565 | |
![]() | 300 | Swift A-Frame hollowpoint | 31.5 | 1,587 | |
![]() | 335 | Cast Performance WLN GC | 27.0 | 1,491 | |
in a Freedom Arms Model 83 (4 3/4-inch barrel) Freedom Arms Model 83 with barrel length of 4 3/4 inches. Remington 7 1/2 and Federal 205 (Small Rifle Magnum) primers and Starline cases used throughout. Maximum case length is 1.383 inches and trim-to length is 1.373 inches. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 260 | Nosler Partition | 36.0 | 1,811 | |
![]() | 300 | Hornady XTP-HP | 31.5 | 1,631 | |
![]() | 300 | Swift A-Frame hollowpoint | 31.5 | 1,641 | |
![]() | 335 | Cast Performance WLN GC | 27.0 | 1,559 | |
in a Freedom Arms Model 83 (7 1/2-inch barrel) Freedom Arms Model 83 with barrel length of 7 1/2 inches. Remington 7 1/2 and Federal 205 (Small Rifle Magnum) primers and Starline cases used throughout. Maximum case length is 1.383 inches and trim-to length is 1.373 inches. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 250 | Barnes XPB | 31.0 | 1767 | sugg. start load; 1.770" OAL |
![]() | 250 | Barnes XPB | 32.0 | 1829 | max load; compressed powder charge; 1.770" OAL |
![]() | 300 | Hornady Mag Jacketed XTP/HP | 27.1 | 1563 | sugg. start load; 1.745" OAL |
![]() | 300 | Hornady Mag Jacketed XTP/HP | 28.0 | 1589 | max load; 1.745" OAL |
in a T/C Contender & Encore Lyman Reloading Manual 49th Edition This data was developed for use in the T/C Contender and Encore handguns. It can also be used in other single shot or bolt-action handguns such as the Remington XP-100 and Savage Striker. Do not use these loads in any other type of handgun. Cases: Winchester; trim-to length: 1.380"; primers: CCI 450; primer size: Small Rifle, Magnum; Lyman shell holder: No. 11; cast bullets used sized to .451" dia.; firearm used: Thompson/Center Encore; barrel length: 12"; twist: 1-16"; groove dia.: .451" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 335 | Cast Performance WLNGC | 27.0 | 1,789 | accurate, no leading issues |
in an LSI Puma Model 92 All loads fired from the LSI Puma Model 92 .454 Casull with a 20-inch barrel. Handloads were made up in Winchester cases with Remington 7 1/2 primers. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 300 | Speer 454 GDHP | 41.0 | 1,632 | |
firearm: Smith & Wesson .460 XVR; SAAMI maximum average pressure: 65,000 psi; barrel length: 7 1/2-inches; case: Starline; primer: CCI #200; trim to case length: 1.790"; temperature: 15 degrees | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 200 | Hornady FTX | 43.3 | 1900 | |
![]() | 200 | Hornady FTX | 46.0 | 2000 | |
![]() | 200 | Hornady FTX | 48.7 | 2100 | |
![]() | 200 | Hornady FTX | 51.4 | 2200 | maximum load |
Hornady FTX Data rifle: S&W 460 XVR; barrel: Factory; length: 8 3/8"; twist: Gain twist 1 in 20"; primer: WLR; case: Hornady; C.O.L.: 2.275"; approach maximum loads with extreme caution | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 300 | Speer UCSP | 32.0 | 1504 | start charge; reduced recoil load |
![]() | 300 | Speer UCSP | 34.0 | 1469 | max charge; reduced recoil load |
![]() | 300 | Speer Casull GDHP | 36.0 | 1539 | start charge; full pressure load |
![]() | 300 | Speer Casull GDHP | 38.0 | 1597 | max charge; full pressure load |
Speer Handgun Data Reloading Manual #14 max. case length: 1.800"; trim-to length: 1.790"; max cart. OAL: 2.290"; RCBS shell holder: #14; cart. case: Hornady; primer: Federal 210; test firearm Smith & Wesson X-Frame; barrel length: 8.375"; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 200 | Hornady FTX (460 S&W) | 43.3 | 1787 | |
![]() | 200 | Hornady FTX (460 S&W) | 46.0 | 1876 | |
![]() | 200 | Hornady FTX (460 S&W) | 48.7 | 1960 | |
![]() | 200 | Hornady FTX (460 S&W) | 51.4 | 2050 | maximum load |
![]() | 240 | Hornady XTP Mag | 39.5 | 1442 | |
![]() | 240 | Hornady XTP Mag | 41.9 | 1539 | |
![]() | 240 | Hornady XTP Mag | 44.2 | 1629 | |
![]() | 240 | Hornady XTP Mag | 46.5 | 1720 | |
![]() | 240 | Hornady XTP Mag | 48.8 | 1802 | maximum load |
![]() | 300 | Hornady XTP Mag | 31.1 | 1181 | |
![]() | 300 | Hornady XTP Mag | 35.2 | 1321 | |
![]() | 300 | Hornady XTP Mag | 37.3 | 1384 | |
![]() | 300 | Hornady XTP Mag | 39.3 | 1495 | maximum load |
Using Hornady Bullets Gun: Smith & Wesson Model 460 XVR; barrel length: 8 3/8 inches; case: Starline; primer: Winchester Large Rifle; bullet diameter: .452"; bullets: 200 GR Hornady FTX (460 S&W) COAL: 2.275", 240 GR Hornady XTP Mag COAL: 2.160", 300 GR Hornady XTP Mag COAL: 2.165"; maximum COAL: 2.275"; maximum case length: 1.800"; trim to length: 1.790". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 225 | Barnes X | 42.0 | 2,243 | col: 2.110"; 51,800 psi |
![]() | 240 | Hornady XTP Mag | 48.5 | 2,254 | col: 2.160"; 52,100 psi |
![]() | 250 | Barnes X | 41.5 | 2,133 | col: 2.200"; 56,800 psi |
![]() | 260 | Nosler Partition | 46.0 | 2,178 | col: 2.175"; 54,000 psi |
![]() | 265 | Swift Hollow Point | 46.5 | 2,183 | col: 2.180"; 56,400 psi |
![]() | 300 | Hornady XTP Mag | 42.5 | 2,034 | col: 2.160"; 56,100 psi |
![]() | 325 | CPB LFN PB | 42.0 | 1,953 | col: 2.200"; 54,900 psi |
![]() | 325 | Swift Hollow Point | 39.0 | 1,907 | col: 2.175"; 56,800 psi |
![]() | 335 | CPB WLN GC | 41.0 | 1,917 | col: 2.180"; 55,800 psi |
![]() | 360 | CPB WLN GC | 38.0 | 1,836 | col: 2.190"; 56,900 psi |
![]() | 395 | CPB WLN GC | 34.0 | 1,693 | col: 2.185"; 55,700 psi |
Winchester Pistol Data case: Starline; bbl: 10.743"; pr: Winchester LRM; NEVER exceed loads listed |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 380 | NEI #390.477 | 25.0 | 1119 | |
![]() | 380 | NEI #390.477 | 27.0 | 1232 | |
![]() | 380 | NEI #390.477 | 29.0 | 1324 | |
![]() | 380 | NEI #390.477 | 31.0 | 1408 | |
![]() | 410 | LBT #476.420LFN | 25.0 | 1204 | |
![]() | 410 | LBT #476.420LFN | 27.0 | 1302 | |
![]() | 410 | LBT #476.420LFN | 29.0 | 1394 | |
![]() | 440 | LBT #476.440LFN | 25.0 | 1201 | |
![]() | 440 | LBT #476.440LFN | 27.0 | 1302 | |
![]() | 350 | LBT #476.370LFN | 29.0 | 1343 | |
![]() | 350 | LBT #476.370LFN | 31.0 | 1427 | |
![]() | 350 | LBT #476.370LFN | 33.0 | 1534 | |
firearm: Custom Bisley Ruger 5-1/2"; brass: .45-70 trimmed to 1.410"; primer: CCI #350; chronograph: Oehler Model 35P; temperature: 35-45 degrees (John Taffin Tests) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 275 | Barnes XPB HP | 32.0 | 1697 | sugg. start load; 1.810" OAL; 47,900 psi |
![]() | 275 | Barnes XPB HP | 33.0 | 1711 | max load; compressed powder charge; 1.810" OAL; 48,500 psi |
![]() | 325 | Hornady Jacketed XTP/HP | 31.2 | 1592 | sugg. start load; 41,600 psi |
![]() | 325 | Hornady Jacketed XTP/HP | 32.2 | 1643 | max load; 48,600 psi |
![]() | 400 | Hornady Jacketed XTP/HP | 24.0 | 1315 | sugg. start load; 44,000 psi |
![]() | 400 | Hornady Jacketed XTP/HP | 24.8 | 1349 | max load; 46,400 psi |
Lyman Reloading Handbook 49th Edition cases: Hornady; trim-to length: 1.395"; primers: CCI 350; primer size: Large Pistol, Magnum; Lyman shell holder: No. 17; 1.740" OAL (except where otherwise specified in remarks); firearm used: Universal Receiver; barrel length: 7 1/2"; twist: 1-18"; groove dia.: .475" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 400 | Speer GDSP | 23.5 | 1161 | start charge; primer: CCI 350 Magnum |
![]() | 400 | Speer GDSP | 25.5 | 1226 | max charge; primer: CCI 350 Magnum |
Speer Handgun Data Reloading Manual #14 max. case length: 1.400"; trim-to length: 1.390"; max cart. OAL: 1.765"; RCBS shell holder: #40; cart. case: Buffalo Bore; primer: CCI 300 (except where otherwise specified in remarks); test firearm: Freedom Arms M767; barrel length: 6"; Important Safety Note: Older developed in cut-down 45-70 cases must not be used in new Buffalo Bore or Hornady cases, as high pressures will result; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 325 | Hornady XTP Mag | 27.2 | 1189 | |
![]() | 325 | Hornady XTP Mag | 29.7 | 1277 | |
![]() | 325 | Hornady XTP Mag | 31.0 | 1365 | |
![]() | 325 | Hornady XTP Mag | 32.3 | 1454 | maximum load |
![]() | 400 | Hornady XTP Mag | 21.1 | 933 | |
![]() | 400 | Hornady XTP Mag | 22.1 | 985 | |
![]() | 400 | Hornady XTP Mag | 23.1 | 1045 | |
![]() | 400 | Hornady XTP Mag | 24.0 | 1107 | |
![]() | 400 | Hornady XTP Mag | 25.0 | 1168 | |
![]() | 400 | Hornady XTP Mag | 26.0 | 1221 | maximum load |
Using Hornady Bullets Gun: Freedom Arms Model 757; barrel length: 6 inches; case: BBA/Starline; primer: Winchester Large Pistol; bullet diameter: .475"; COAL: 1.740"; maximum COAL: 1.765"; maximum case length: 1.400"; trim to length: 1.390". |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 325 | Hornady XTP | 25.0 | 1416 | start load; COL: 1.620"; 37,300 psi |
![]() | 325 | Hornady XTP | 27.0 | 1518 | max load; COL: 1.620"; 44,900 psi |
![]() | 355 | Beartooth Bullets LFN GC | 26.0 | 1415 | start load; bullet diam.: .476"; COL: 1.630"; 34,700 psi |
![]() | 355 | Beartooth Bullets LFN GC | 27.0 | 1464 | max load; bullet diam.: .476"; COL: 1.630"; 38,400 psi |
![]() | 370 | Cast Performance Bullets LFP | 24.0 | 1348 | start load; COL: 1.640"; 33,400 psi |
![]() | 370 | Cast Performance Bullets LFP | 26.0 | 1454 | max load; COL: 1.640"; 41,500 psi |
![]() | 400 | Hornady XTP | 18.0 | 1115 | start load; COL: 1.620"; 34,400 psi |
![]() | 400 | Hornady XTP | 20.5 | 1258 | max load; COL: 1.620"; 46,600 psi |
![]() | 405 | Cast Performance Bullets (w/GCK) | 20.0 | 1213 | start load; COL: 1.620"; 35,500 psi |
![]() | 405 | Cast Performance Bullets (w/GCK) | 22.3 | 1328 | max load; COL: 1.620"; 45,200 psi |
![]() | 420 | Beartooth Bullets LFN GC | 19.0 | 1145 | start load; bullet diam.: .476"; COL: 1.640"; 34,200 psi |
![]() | 420 | Beartooth Bullets LFN GC | 20.0 | 1203 | max load; bullet diam.: .476"; COL: 1.640"; 38,700 psi |
Hodgdon Data Case: Hornady; twist: 1:18"; primer: Winchester LP; barrel length: 7 1/2"; trim length: 1.275"; bullet diam.: .475" (except where otherwise specified in remarks). NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 275 | Speer Jacketed HP | 30.5 | 1645 | sugg. start load; 1.650" OAL; 40,200 psi |
![]() | 275 | Speer Jacketed HP | 31.5 | 1699 | max load; compressed powder charge; 1.650" OAL; 43,200 psi |
![]() | 325 | Hornady Jacketed HP/XTP | 27.1 | 1503 | sugg. start load; 43,900 psi |
![]() | 325 | Hornady Jacketed HP/XTP | 28.0 | 1550 | max load; 46,800 psi |
![]() | 400 | Hornady Jacketed HP/XTP | 20.8 | 1211 | sugg. start load; 40,500 psi |
![]() | 400 | Hornady Jacketed HP/XTP | 21.5 | 1261 | max load; 45,700 psi |
Lyman Reloading Handbook 49th Edition cases: Hornady; trim-to length: 1.275"; primers: Winchester WLP; primer size: Large Pistol; Lyman shell holder: No. 17; 1.620" OAL (except where otherwise specified in remarks); firearm used: Universal Receiver; barrel length: 7 1/2"; twist: 1-18"; groove dia.: .475" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 275 | Speer Gold Dot HP | 32.0 | 1,590 | starting load; CCI Magnum primer used with this propellant |
![]() | 275 | Speer Gold Dot HP | 34.0 | 1,695 | MAXIMUM load; CCI Magnum primer used with this propellant |
![]() | 325 | Speer Gold Dot SP | 26.0 | 1,366 | starting load; CCI Magnum primer used with this propellant |
![]() | 325 | Speer Gold Dot SP | 28.0 | 1,464 | MAXIMUM load; CCI Magnum primer used with this propellant |
![]() | 400 | Speer Gold Dot SP | 19.0 | 1,067 | starting load; CCI Magnum primer used with this propellant |
![]() | 400 | Speer Gold Dot SP | 21.0 | 1,165 | MAXIMUM load; CCI Magnum primer used with this propellant |
Speer Data case: Hornady; primer: CCI 300/350; test firearm: Ruger Redhawk; barrel: 9 1/2"; COAL tested 1.650"; use MAXIMUM loads with caution | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 275 | Speer GDHP | 32.0 | 1590 | start charge; primer: CCI 350 Magnum; |
![]() | 275 | Speer GDHP | 34.0 | 1695 | max charge; primer: CCI 350 Magnum |
![]() | 325 | Speer GDSP | 26.0 | 1366 | start charge; primer: CCI 350 Magnum |
![]() | 325 | Speer GDSP | 28.0 | 1464 | max charge; primer: CCI 350 Magnum |
![]() | 400 | Speer GDSP | 19.0 | 1067 | start charge; primer: CCI 350 Magnum |
![]() | 400 | Speer GDSP | 21.0 | 1165 | max charge; primer: CCI 350 Magnum |
Speer Handgun Data Reloading Manual #14 max. case length: 1.285"; trim-to length: 1.275"; max cart. OAL: 1.650"; RCBS shell holder: #40; cart. case: Hornady; primer: CCI 300 (except where otherwise noted in remarks); test firearm: Ruger Redhawk; barrel length: 9.5"; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 325 | Hornady XTP Mag | 20.1 | 891 | |
![]() | 325 | Hornady XTP Mag | 22.3 | 987 | |
![]() | 325 | Hornady XTP Mag | 24.4 | 1098 | |
![]() | 325 | Hornady XTP Mag | 26.6 | 1209 | |
![]() | 325 | Hornady XTP Mag | 27.7 | 1313 | maximum load |
![]() | 400 | Hornady XTP Mag | 17.9 | 892 | |
![]() | 400 | Hornady XTP Mag | 19.7 | 956 | |
![]() | 400 | Hornady XTP Mag | 20.6 | 1020 | |
![]() | 400 | Hornady XTP Mag | 21.5 | 1084 | maximum load |
Using Hornady Bullets Gun: Freedom Arms Model 757; barrel length: 6 inches; case: Hornady; primer: Winchester Large Pistol for Standard and Magnum loads; bullet diameter: .475"; 325 GR COAL: 1.620"; 400 GR COAL: 1.630"; maximum COAL: 1.650"; maximum case length: 1.285"; trim to length: 1.275". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 325 | Hornady XTP | 27.0 | 1,518 | col: 1.620"; 44,900 psi |
![]() | 355 | BTB Lead Flat Nose Gas Check | 27.0 | 1,464 | col; 1.630"; 38,400 psi |
![]() | 370 | CPB Lead Flat Point | 26.0 | 1,454 | col: 1.640"; 41,500 psi |
![]() | 400 | Hornady XTP | 20.5 | 1,258 | col: 1.620"; 46,600 psi |
![]() | 405 | CPB (W/GCK) | 22.3 | 1,328 | col: 1.620"; 45,200 psi |
![]() | 420 | BTB Lead Flat Nose Gas Check | 20.0 | 1,203 | col: 1.640"; 38,700 psi |
Winchester Pistol Data case: Hornady; BBL: 7.5"; PR: Winchester LP; NEVER exceed loads listed | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 325 | Speer Gold Dot | 28.0 | 1,397 | primer: CCI 350 |
![]() | 400 | Speer Gold Dot SP | 21.5 | 1,095 | primer: CCI 350 |
![]() | 410 | Cast Performance LBT | 22.0 | 1,209 | primer: CCI 350 |
in an FA Model 757 Test gun was a Freedom Arms Model 757 with a 6-inch barrel. Maximum pressure was 48,000 psi. Hornady cases used throughout. Temperature during testing was 85 degrees Fahrenheit. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 325 | Speer UCHP | 30.0 | 1299 | |
![]() | 325 | Speer UCHP | 30.5 | 1323 | |
![]() | 325 | Speer UCHP | 31.0 | 1348 | |
![]() | 325 | Speer UCHP | 31.5 | 1374 | |
![]() | 325 | Speer UCHP | 32.0 | 1400 | |
![]() | 325 | Speer UCHP | 32.5 | 1425 | |
![]() | 325 | Speer UCHP | 33.0 | 1451 | maximum load |
Gun: Magnum Research BFR; barrel length: 8 1/8 inches; case: IMI; primer: Winchester Large Pistol; bullet diameter: 500"/.501"; 300 GR Speer GDHP COAL: 1.580", 325 GR UCHP COAL: 1.575"; 325 Hunters Supply Cast FP COAL: 1.625" (1.580" for Auto Loading Pistols); maximum COAL: 1.575"; maximum case length: 1.285"; trim to length: 1.280". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 300 | Hornady XTP-MAG | 32.7 | 1395 | |
![]() | 300 | Hornady XTP-MAG | 33.9 | 1477 | maximum load |
Using Hornady Bullets This data was specifically developed for LoadData.com. Gun: Magnum Research BFR; barrel length: 8 1/8 inches; case: IMI; primer: Winchester Large Pistol; bullet diameter: 500"/.501"; 300 gr Hornady XTP-MAG COAL: 1.580"; maximum COAL: 1.575"; maximum case length: 1.285"; trim to length: 1.280". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 275 | Barnes XPB | 32.0 | 1,738 | SINGLESHOT AND REVOLVERS ONLY; NOT FOR USE IN SEMI-AUTOMATICS |
![]() | 275 | Barnes XPB | 33.0 | 1,802 | SINGLESHOT AND REVOLVERS ONLY; NOT FOR USE IN SEMI-AUTOMATICS; maximum load |
Barnes Reloading Manual #3 case: Speer; parent case: none; primer: Win Large Pistol; trim to: 1.275"; barrel: 15"; Coated X-Bullet data cannot be used with other bullets, including non-coated X-Bullets; maximum loads should be used with caution - Always Start With Minimum Loads | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 300 | Speer TMJ FN or GDHP | 33.5 | 1466 | start charge; primer: CCI 350 Magnum |
![]() | 300 | Speer TMJ FN or GDHP | 34.5 | 1567 | maximum charge; primer: CCI 350 Magnum |
![]() | 325 | Speer UCHP | 29.5 | 1279 | start charge; primer: CCI 350 Magnum |
![]() | 325 | Speer UCHP | 32.7 | 1409 | maximum charge; primer: CCI 350 Magnum |
![]() | 300 | Speer TMJ FN or GDHP | 33.5 | 1465 | start charge; primer: CCI 350 Magnum; revolver Freedom Arms M555 7.5" |
![]() | 300 | Speer TMJ FN or GDHP | 34.5 | 1526 | maximum charge; primer: CCI 350 Magnum; revolver Freedom Arms M555 7.5" |
![]() | 325 | Speer UCHP | 29.5 | 1321 | start charge; primer: CCI 350 Magnum; revolver Freedom Arms M555 7.5" |
![]() | 325 | Speer UCHP | 32.7 | 1461 | maximum charge; primer: CCI 350 Magnum; revolver Freedom Arms M555 7.5" |
![]() | 340 | Speer SWC | 29.0 | 1412 | start charge; primer: CCI 350 Magnum; revolver Freedom Arms M555 7.5" |
![]() | 340 | Speer SWC | 31.0 | 1498 | maximum charge; compressed load; primer: CCI 350 Magnum; revolver Freedom Arms M555 7.5" |
Speer Reloading Manual #14 max. case length: 1.286"; trim-to length: 1.276"; max cart. OAL: 1.595"; RCBS shell holder: #33; cart. case: Speer; the 340 grain SWC bullets were cast in RCBS moulds; NOTE: primer, test firearm and barrel length are as follows except where otherwise noted in remarks - primer: CCI 300; test firearm: Magnum Research Desert Eagle; barrel length: 6"; maximum loads should be used with CAUTION |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 404 | LBT #512.400LFN | 29.0 | 1030 | |
![]() | 404 | LBT #512.400LFN | 31.0 | 1201 | |
![]() | 445 | LBT #512.440 LFN | 27.0 | 1072 | |
![]() | 445 | LBT #512.440 LFN | 29.0 | 1171 | |
![]() | 444 | NEI #420.511 | 27.0 | 1167 | |
![]() | 444 | NEI #420.511 | 29.0 | 1256 | |
firearm: Custom Bisley Ruger 5 1/2"; brass: .500 Linebaugh; primer: CCI #350; chronograph: Oehler Model 35P (John Taffin Tests) |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 275 | Barnes XPB | 42.0 | 1965 | minimum; COAL: 2.085" |
![]() | 275 | Barnes XPB | 45.0 | 2082 | maximum; COAL: 2.085" |
![]() | 325 | Barnes XPB | 42.0 | 1813 | minimum; COAL: 2.290" |
![]() | 325 | Barnes XPB | 45.3 | 1951 | maximum; COAL: 2.290" |
Barnes Reloading Manual #4 case: Starline; case trim length: 1.615"; twist rate: 1:15"; primer: Federal GM210M; barrel length: 10"; maximum loads should be used with caution; NOTE: Roll crimp the case mouth into the cannelure. Brass for this cartridge has been made with both Large Pistol and Large Rifle primer pockets. Our data was developed using Large Rifle primers. The primer pockets for Large Rifle primers are the same diameter, but slightly deeper than the primer pockets designed for Large Pistol primers. Cases with the shallower primer pocket can be reamed deeper to accept Large Rifle primers. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 350 | Sierra JHP | 39.2 | 1489 | COAL: 2.050 inches |
![]() | 350 | Sierra JHP | 41.6 | 1684 | Maximum Load; COAL: 2.050 inches |
using Sierra bullets Gun: Smith & Wesson Model 500; Barrel Length: 8 3/8 inches; Case: Starline "R"; Primer: Winchester Large Rifle; Bullet Diameter: .500 inches; Maximum COAL: 2.250 inches; Maximum Case Length: 1.620 inches; Trim to Length: 1.615 inches. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 370 | Cast Performance WFN GC | 47.5 | 1,875 | maximum, very accurate |
Starline cases and Winchester Large Rifle primers used throughout. Temperature during testing was 80 degrees Fahrenheit. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 350 | Hornady XTP-MAG | 34.9 | 1,400 | primer: WLPM or WLR; C.O.L.: 2.000" |
![]() | 350 | Hornady XTP-MAG | 37.4 | 1,500 | primer: WLPM or WLR; C.O.L.: 2.000" |
![]() | 350 | Hornady XTP-MAG | 39.9 | 1,600 | primer: WLPM or WLR; C.O.L.: 2.000" |
![]() | 350 | Hornady XTP-MAG | 41.2 | 1,650 | primer: WLPM or WLR; C.O.L.: 2.000" |
![]() | 350 | Hornady XTP-MAG | 42.4 | 1,700 | maximum load; primer: WLPM or WLR; C.O.L.: 2.000" |
![]() | 500 | Hornady JFP | 24.9 | 1,000 | primer: WLP; C.O.L.: 2.040" |
![]() | 500 | Hornady JFP | 27.4 | 1,100 | primer: WLP; C.O.L.: 2.040" |
![]() | 500 | Hornady JFP | 29.9 | 1,200 | primer: WLP; C.O.L.: 2.040" |
![]() | 500 | Hornady JFP | 32.4 | 1,300 | maximum load; primer: WLP; C.O.L.: 2.040" |
Hornady Data rifle: S&W Model 500; barrel length: 8 3/8"; case: Hornady; use maximum loads with extreme caution | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 300 | Hornady FTX | 43.0 | 1700 | |
![]() | 300 | Hornady FTX | 45.7 | 1800 | |
![]() | 300 | Hornady FTX | 48.4 | 1900 | |
![]() | 300 | Hornady FTX | 49.8 | 1950 | maximum load |
FTX Data rifle: S&W Model 500; barrel: Factory; length: 8 3/8"; primer: WLR; case: Hornady; C.O.L.: 2.195"; approach maximum loads with extreme caution | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 275 | Barnes XPB | 42.0 | 1965 | start load; COL: 2.085"; 43,900 psi |
![]() | 275 | Barnes XPB | 45.0 | 2082 | max load; COL: 2.085"; 49,300 psi |
![]() | 325 | Barnes XPB | 42.0 | 1813 | start load; COL: 2.290"; 40,000 psi |
![]() | 325 | Barnes XPB | 45.3 | 1951 | max load; COL: 2.290"; 48,900 psi |
![]() | 350 | Hornady XTP | 39.0 | 1712 | start load; COL: 1.985"; 41,500 psi |
![]() | 350 | Hornady XTP | 43.0 | 1877 | max load; COL: 1.985"; 50,600 psi |
![]() | 370 | Cast Performance Bullets LGC | 44.5 | 1801 | start load; COL: 2.020"; 42,800 psi |
![]() | 370 | Cast Performance Bullets LGC | 47.0 | 1909 | max load; COL: 2.020"; 49,900 psi |
![]() | 385 | Rem. HP | 39.0 | 1648 | start load; COL: 2.150"; 38,700 psi |
![]() | 385 | Rem. HP | 42.5 | 1794 | max load; COL: 2.150"; 47,300 psi |
![]() | 400 | Sierra JSP | 34.0 | 1514 | start load; COL: 2.050"; 38,000 psi |
![]() | 400 | Sierra JSP | 40.0 | 1721 | max load; COL: 2.050"; 49,700 psi |
![]() | 440 | Cast Performance Bullet LGC | 34.0 | 1509 | start load; COL: 2.025"; 40,700 psi |
![]() | 440 | Cast Performance Bullet LGC | 38.0 | 1654 | max load; COL: 2.025"; 49,900 psi |
![]() | 500 | Hornady SP | 31.0 | 1400 | start load; COL: 2.065"; 34,400 psi |
![]() | 500 | Hornady SP | 33.0 | 1482 | max load; COL: 2.065"; 51,900 psi |
Hodgdon Pistol Data case: Starline; twist: 1:18"; barrel: 10"; trim: 1.615"; primer: Winchester LR; dia: .500"; NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 370 | Cast Performance WFN-GC | 47.5 | 2160 | |
In a Big Horn Armory Model 89 All loads were fired from an 18-inch barreled Big Horn Armory Model 89 carbine. Starline R (for large rifle primers) cases and Winchester Large Rifle primers were used throughout. Maximum overall loaded length: 2.040 inches; maximum case length: 1.620 inches; case trim-to length: 1.615 inches. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 350 | S&W UCSP | 44.0 | 1585 | start charge |
![]() | 350 | S&W UCSP | 46.0 | 1639 | max charge |
Speer Handgun Data Reloading Manual #14 max. case length: 1.625"; trim-to length: 1.615"; max cart. OAL: 2.250"; RCBS shell holder: #44; cart. case: Starline; primer: Federal 215 (Magnum); test firearm: Smith & Wesson X-Frame; barrel length: 8.875"; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 300 | Hornady FTX | 43.0 | 1560 | |
![]() | 300 | Hornady FTX | 45.7 | 1654 | |
![]() | 300 | Hornady FTX | 48.4 | 1720 | |
![]() | 300 | Hornady FTX | 49.8 | 1844 | maximum load |
![]() | 350 | Hornady XTP Mag | 34.9 | 1210 | |
![]() | 350 | Hornady XTP Mag | 37.4 | 1310 | |
![]() | 350 | Hornady XTP Mag | 39.9 | 1421 | |
![]() | 350 | Hornady XTP Mag | 41.2 | 1520 | |
![]() | 350 | Hornady XTP Mag | 42.4 | 1605 | maximum load |
![]() | 500 | Hornady FP-XTP | 24.9 | 860 | |
![]() | 500 | Hornady FP-XTP | 27.4 | 1010 | |
![]() | 500 | Hornady FP-XTP | 29.9 | 1098 | |
![]() | 500 | Hornady FP-XTP | 32.4 | 1161 | maximum load |
Using Hornady Bullets & Winchester Large Pistol Primer Gun: Smith & Wesson Model 500; barrel length: 8 3/8 inches; case: Starline; primer: Winchester Large Pistol for standard or magnum; bullet diameter: .500"; 300 GR FTX COAL: 2.195"; 350 GR XTP Mag COAL: 2.000"; 500 GR FP-XTP COAL: 2.080"; maximum COAL: 2.250"; maximum case length: 1.620"; trim to length: 1.615". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 300 | Hornady FTX | 43.0 | 1589 | |
![]() | 300 | Hornady FTX | 45.7 | 1678 | |
![]() | 300 | Hornady FTX | 48.4 | 1743 | |
![]() | 300 | Hornady FTX | 49.8 | 1868 | maximum load |
![]() | 350 | Hornady XTP Mag | 34.9 | 1301 | |
![]() | 350 | Hornady XTP Mag | 37.4 | 1322 | |
![]() | 350 | Hornady XTP Mag | 39.9 | 1461 | |
![]() | 350 | Hornady XTP Mag | 41.2 | 1563 | |
![]() | 350 | Hornady XTP Mag | 42.4 | 1636 | maximum load |
![]() | 500 | Hornady FP-XTP | 24.9 | 955 | |
![]() | 500 | Hornady FP-XTP | 27.4 | 1121 | |
![]() | 500 | Hornady FP-XTP | 29.9 | 1203 | |
![]() | 500 | Hornady FP-XTP | 32.4 | 1254 | maximum load |
Using Hornady Bullets & Winchester Large Rifle Primer Gun: Smith & Wesson Model 500; barrel length: 8 3/8 inches; case: Starline "R"; primer: Winchester Large Rifle; bullet diameter: .500"; 300 GR FTX COAL: 2.195"; 350 GR XTP Mag COAL: 2.000"; 500 FP-XTP COAL: 2.080"; maximum COAL: 2.250"; maximum case length: 1.620"; trim to length: 1.615". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 275 | Barnes XPB | 45.0 | 2,082 | col: 2.085"; 49,300 psi |
![]() | 325 | Barnes XPB | 45.3 | 1,951 | col: 2.290"; 48,900 psi |
![]() | 350 | Hornady XTP | 43.0 | 1,877 | col: 1.985"; 50,600 psi |
![]() | 370 | CPB LGC | 47.0 | 1,909 | col: 2.020"; 49,900 psi |
![]() | 385 | Remington Hollow Point | 42.5 | 1,794 | col: 2.150"; 47,300 psi |
![]() | 400 | Sierra Jacketed Soft Point | 40.0 | 1,721 | col: 2.050"; 49,700 psi |
![]() | 440 | CPB LGC | 38.0 | 1,654 | col: 2.025"; 49,900 psi |
![]() | 500 | Hornady SP | 33.0 | 1,482 | col: 2.065"; 51,900 psi |
Winchester Pistol Data case: Starline; BBL: 10"; PR: Winchester LR; NEVER exceed loads listed |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 90 | Hornady HP-XTP | 10.2 | 942 | |
![]() | 90 | Hornady HP-XTP | 11.3 | 1060 | |
![]() | 90 | Hornady HP-XTP | 12.3 | 1201 | |
![]() | 90 | Hornady HP-XTP | 13.3 | 1377 | |
![]() | 90 | Hornady HP-XTP | 14.4 | 1533 | maximum load |
Using Hornady Bullets Gun: CZ Model 52; barrel length: 4 3/4 inches; case: Starline; primer: Winchester Small Pistol; bullet diameter: .308" and .309" (.309" used throughout test); COAL: 1.320"; maximum COAL: 1.385"; maximum case length: .984"; trim to length: .974". NOTES FROM THE LAB - The 7.62mm Tokarev (aka 7.62x25mm Russian Tokarev) was adopted as the official Soviet military pistol cartridge around 1930 in the Models TT-30 and TT-33 auto-loading pistols. Surplus guns (made in several different countries) eventually began finding their way to the US in the late 1980's. Quality varied significantly; however, both guns and ammunition were inexpensive and many are currently in circulation. The test pistol used here was a CZ Model 52, one of the better quality guns offered in the chambering. Most surplus ammunition is Berdan primed and is usually corrosive. Barrel groove diameter has a rather large variance, with many pistols utilizing .311 to .312 inch bullets. To develop handload data Starline cases were used (available direct at 800-280-6660). These are intended to house .308-inch bullets and will require neck reaming if .311- to .312-inch bullets are used. The Hornady 90-grain HP-XTP currently has a .309-inch diameter, which seated correctly and functioned properly in the CZ 52. Bullets had a tendency to tilt during seating; however, with care they could be straight in the rather short case neck. A crimp was applied as a separate step using a Lee Factory Crimp Die. Some "start" loads did not produce enough pressure to reliably operate the action on the test pistol, but all maximum loads functioned flawlessly. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 100 | FMJ RN | 17.2 | 1,769 | energy: 690 |
![]() | 115 | JHP | 15.0 | 1,566 | energy: 625 |
![]() | 124 | FMJ FP | 14.4 | 1,529 | energy: 640 |
![]() | 130 | Cast | 13.5 | 1,479 | energy: 630 |
8-inch barrel. The 9x25 Dillon is formed by necking the 10mm Automatic case to 9mm with a sharp shoulder and a short neck. This creates a relatively high-capacity pistol cartridge, which is based on a high-pressure case. (Cartridges of the World 10th Edition) |