Very fast burning and competitive with Alliant Bullseye, Hodgdon HP38 and Vectan Ba 10. It has applications in a very wide range from .32 S&W Long Wadcutter up to .45 ACP.
Shape | Color | Perforation | Diameter min | Diameter max | Length/thick. min | Length/thick. max | Manufacturer |
---|---|---|---|---|---|---|---|
Cylinder(tubular) | Gold | Yes | 0.47 mm | 0.53 mm | 0.53 mm | 1.53 mm | Finland |
Ladedata som finnes på hjemmesidene til Evje PK er KUN ment som en veiledning! Ladedata skal alltid verifiseres mot kjente kilder (kruttprodusenter, ladebøker o.l.)
Data funnet på våre hjemmesider brukes på eget ansvar, og Evje Pistolklubb fratar seg alt ansvar for feil bruk av, eller skrivefeil i oppgitte data.
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 50 | Jacketed | 0.9 | 671 | starting load; min OAL: 0.906 |
![]() | 50 | Jacketed | 1.1 | 804 | NEVER EXCEED; min OAL: 0.906 |
Lee Precision Data CAUTION: With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. Small Pistol Primer. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 60 | Hornady HP-XTP | 2.1 | 897 | |
![]() | 60 | Hornady HP-XTP | 2.3 | 927 | maximum load |
Using Hornady Bullets Gun: Kel Tec P-32; barrel length: 2.5 inches; case: Remington; primer: Winchester Small Pistol; bullet diameter: .311 to .312 inch (.311 used herein); COAL: .925 inch; maximum COAL: .984 inch; maximum case length: .680 inch; trim to length: .670 inch; NOTE: All loads functioned (extracted, ejected and fed) reliably in two pistols: a Kel Tec P-32 and a Walther PP. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 71 | Jacketed | 1.7 | 812 | start load; OAL: 0.984 |
![]() | 71 | Jacketed | 2.2 | 1001 | never exceed; OAL: 0.984 |
Using Hornady Bullets With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. Small Pistol primer. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 83 | Wad Cutter | 1.5 | 767 | start load; OAL: 0.969 |
![]() | 83 | Wad Cutter | 1.7 | 856 | never exceed; OAL: 0.969 |
![]() | 98 | Lead | 1.9 | 848 | start load; OAL: 1.172 |
![]() | 98 | Lead | 2.2 | 916 | never exceed; OAL: 1.172 |
![]() | 98 | Wad Cutter | 1.1 | 618 | start load; OAL: 0.969 |
![]() | 98 | Wad Cutter | 1.3 | 691 | never exceed; OAL: 0.969 |
Lee Precision Data With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. Small Pistol primer. (MODERN RELOADING Second Edition - Richard Lee) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 85 | Cast #313249 | 2.2 | 756 | sugg. start load; 1.210" OAL |
![]() | 85 | Cast #313249 | 2.5 | 875 | max load; 1.210" OAL |
![]() | 90 | Hornady Swaged Lead HBWC | 1.6 | 728 | sugg. start load; .920" OAL |
![]() | 90 | Hornady Swaged Lead HBWC | 1.8 | 752 | max load; .920" OAL |
Lyman Reloading Handbook 49th Edition cases: Remington; trim-to length: .910"; primers: Remington 1 1/2; primer size: Small Pistol; Lyman shell holder: No. 9; cast bullets used sized to .312" dia.; firearm used: Smith & Wesson Model 31; barrel length: 4"; twist: 1-18 3/4"; groove dia.: .312" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 83 | Lapua LWC | 1.4 | 758 | starting load |
![]() | 83 | Lapua LWC | 1.7 | 846 | maximum load |
![]() | 98 | Lapua LWC | 1.1 | 610 | starting load |
![]() | 98 | Lapua LWC | 1.2 | 682 | maximum load |
Vihtavuori Reloading Guide 6 test barrel: 7", 1 in 18 1/2" twist; primers: Small Pistol; cases: Lapua, trim-to length: 0.913"; COL (in.): 0.969; loads less than minimum charges shown are not recommended; USE MAXIMUM LOADS WITH CAUTION! | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 83 | Lapua LWC | 1.7 | 807 | starting load |
![]() | 83 | Lapua LWC | 2.0 | 938 | maximum load |
![]() | 98 | Lapua LWC | 1.4 | 764 | starting load |
![]() | 98 | Lapua LWC | 1.9 | 843 | maximum load |
Vihtavuori Reloading Guide 6 test barrel: 6", 1 in 18 3/4" twist; primers: Small Pistol; cases: Lapua, trim-to length: 0.913"; COL (in.): 0.969; loads less than minimum charges shown are not recommended; USE MAXIMUM LOADS WITH CAUTION! |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 110 | XTP | 6.2 | 1296 | start load; min OAL: 1.575 |
![]() | 110 | XTP | 6.7 | 1367 | never exceed; min OAL: 1.575 |
![]() | 125 | XTP | 5.5 | 1134 | start load; min OAL: 1.575 |
![]() | 125 | XTP | 6.1 | 1234 | never exceed; min OAL: 1.575 |
Lee Precision Data Small Pistol Primer. With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 110 | Hornady HP/XTP | 6.6 | 1355 | starting load; OAL (in.): 1.575 |
![]() | 110 | Hornady HP/XTP | 7.1 | 1420 | maximum load; OAL (in.): 1.575 |
![]() | 125 | Hornady FP/XTP | 5.9 | 1217 | starting load; OAL (in.): 1.575 |
![]() | 125 | Hornady FP/XTP | 6.6 | 1309 | maximum load; OAL (in.): 1.575 |
Vihtavuori Reloading Guide 2006 test barrel: 7", 1 in 18 1/2" twist; primers: Small Rifles; cases: Remington, trim-to length: 1.283"; loads less than minimum charges shown are not recommended; USE MAXIMUM LOADS WITH CAUTION! |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 150 | Cast #358477 | 1.6 | 637 | sugg. start load; OAL: 1.070"; 9,700 cup |
![]() | 150 | Cast #358477 | 1.8 | 683 | max load; OAL: 1.070"; 11,900 cup |
![]() | 160 | Cast #358311 | 1.6 | 624 | sugg. start load; OAL: 1.150"; 9,500 cup |
![]() | 160 | Cast #358311 | 1.8 | 681 | max load; OAL: 1.150"; 12,900 cup |
Cast Bullet Data (Lyman Reloading Handbook 49th Edition) cases: Remington; trim-to length: .765"; primers: CCI 500; primer size: Small Pistol; Lyman shell holder: No. 21; cast bullets used sized to .359" dia.; firearm used: Universal Receiver; barrel length: 5 1/2"; twist: 1-14"; groove dia.: .358" |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 90 | XTP | 2.4 | 875 | start load; min OAL: 0.980 |
![]() | 90 | XTP | 2.8 | 1010 | never exceed; min OAL: 0.980 |
![]() | 95 | Jacketed | 2.5 | 886 | start load; min OAL: 0.980 |
![]() | 95 | Jacketed | 2.8 | 994 | never exceed; min OAL: 0.980 |
![]() | 100 | Jacketed | 2.2 | 814 | start load; min OAL: 0.980 |
![]() | 100 | Jacketed | 2.5 | 912 | never exceed; min OAL: 0.980 |
Lee Precision Data With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. Small Pistol Primer. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 185 | Speer TMJ-SWC | 4.2 | 846 | starting load; COL (in.): 1.240 |
![]() | 185 | Speer TMJ-SWC | 4.6 | 909 | maximum load; COL (in.): 1.240 |
![]() | 185 | Nosler HP | 4.3 | 817 | starting load; COL (in.): 1.130 |
![]() | 185 | Nosler HP | 5.1 | 938 | maximum load; COL (in.): 1.130 |
![]() | 200 | Intercast LSWC | 3.7 | 827 | starting load; COL (in.): 1.240 |
![]() | 200 | Intercast LSWC | 4.0 | 892 | maximum load; COL (in.): 1.240 |
![]() | 230 | Hornady FMJ-RN | 3.7 | 719 | starting load; COL (in.): 1.260 |
![]() | 230 | Hornady FMJ-RN | 4.2 | 771 | maximum load; COL (in.): 1.260 |
Vihtavuori Reloading Guide 6 test barrel: 6", 1 in 16" twist; primers: Large Pistol; cases: Remington, trim-to length: 0.893"; loads less than minimum charges shown are not recommended; USE MAXIMUM LOADS WITH CAUTION! | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 200 | Bull-X SWC | 4.5 | 910 | case: Rem. primer: WLP |
USPSA/IPSC Major-Power Match Loads Bullets in all are cast. Handgun used was a custom Para-Ordnance with a 5-inch Wilson barrel. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 90 | XTP | 4.0 | 1224 | start load; min OAL: 1.063 |
![]() | 90 | XTP | 4.3 | 1272 | never exceed; min OAL: 1.063 |
Lee Precision Data Small pistol primer. CAUTION: With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 90 | Hornady HP-XTP | 3.9 | 1212 | starting load; COL (in.): 1.063 |
![]() | 90 | Hornady HP-XTP | 4.2 | 1260 | maximum load; COL (in.): 1.063 |
Vihtavuori Reloading Guide 6 test barrel: 4", 1 in 10" twist; primers: Small Pistol; cases: Lapua, trim-to length: 0.748"; loads less than minimum charges shown are not recommended; USE MAXIMUM LOADS WITH CAUTION! | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 90 | Hornady XTP | 4.3 | 1316 | overall length (inches): 1.063; group (inches): 3.25 |
![]() | 90 | Hornady XTP | 5.4 | 1406 | overall length (inches): 1.063; group (inches): 3.60 |
In a Browning Hi-Power Accuracy is for five-shot groups at 25 yards from a solid benchrest. The group was measured from the inside of the most widely spaced bullet holes |