The fastest burning rifle powder from Vihtavuori. Similar to Hodgdon H110 and Winchester 296. N110 can be used in small rifle cases like .22 Hornet and .30 Carbine but also in magnum pistol and revolver cartridges like .357 S&W Magnum, .41 Magnum, .44 Magnum, .454 Casull and .500 S&W.
Shape | Color | Perforation | Diameter min | Diameter max | Length/thick. min | Length/thick. max | Manufacturer |
---|---|---|---|---|---|---|---|
Cylinder(tubular) | Gray | Yes | 0.73 mm | 0.8 mm | 0.8 mm | 1.66 mm | Finland |
Ladedata som finnes på hjemmesidene til Evje PK er KUN ment som en veiledning! Ladedata skal alltid verifiseres mot kjente kilder (kruttprodusenter, ladebøker o.l.)
Data funnet på våre hjemmesider brukes på eget ansvar, og Evje Pistolklubb fratar seg alt ansvar for feil bruk av, eller skrivefeil i oppgitte data.
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 90 | Hornady XTP | 13.8 | 1,567 | primer: WSR |
![]() | 90 | Hornady XTP | 14.5 | 1,644 | primer: WSR |
![]() | 110 | Speer hollowpoint | 12.8 | 1,289 | primer: WSR |
![]() | 110 | Speer hollowpoint | 13.3 | 1,334 | primer: WSR |
in a Black Hawk Test firearm was a Ruger Blackhawk with a 7 1/2-inch barrel. All cases werre Remington. Maximum case length, 1.290 inches. Temperature during testing was 75 degrees Fahrenheit. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 110 | Speer JHP | 12.5 | 1362 | poor accuracy |
![]() | 110 | Sierra JSP | 12.5 | 1375 | okay groups |
in a Ruger Blackhawk Handgun fired for group at 25 yards. Ten-shot groups were fired with a Ruger Blackhawk with a 7 1/2-inch barrel from a machine rest. Chronographing was done with an Oehler Model 35P with the start screen at approximately 6 feet. All loads used CCI 400 Small Rifle primers. Winchester brass was used for cast bullet loads. All other loads used Remington brass. Cast bullets were poured of Linotype, sized .310 inch, lubed with SPG and were fitted with Lyman gas checks where needed. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 110 | Speer JHP | 12.5 | 1498 | poor accuracy |
![]() | 110 | Sierra JSP | 12.5 | 1455 | okay groups |
in an AMT Handgun fired for group at 25 yards. Five-shot groups were fired with the AMT 1911 with a 6 1/2-inch barrel from sandbags. Chronographing was done with an Oehler Model 35P with the start screen at approximately 6 feet. All loads used CCI 400 Small Rifle primers. Winchester brass was used for cast bullet loads. All other loads used Remington brass. Cast bullets were poured of Linotype, sized .310 inch, lubed with SPG and were fitted with Lyman gas checks where needed. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 100 | Jacketed | 13.2 | 1948 | start load; compressed charge; min OAL: 1.673 |
![]() | 100 | Jacketed | 14.5 | 2123 | NEVER EXCEED; compressed charge; min OAL: 1.673 |
![]() | 110 | Jacketed | 11.9 | 1719 | start load; min OAL: 1.673 |
![]() | 110 | Jacketed | 13.3 | 1909 | NEVER EXCEED; compressed charge; min OAL: 1.673 |
Lee Precision Data CAUTION: With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. Small Rifle Primer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 100 | Speer RN SP | 12.0 | 1306 | start charge |
![]() | 100 | Speer RN SP | 13.0 | 1394 | max charge; compressed load |
![]() | 110 | Speer HP or RN SP | 11.5 | 1164 | start charge |
![]() | 110 | Speer HP or RN SP | 12.5 | 1253 | max charge |
Handgun Speer Reloading Manual #14 max. case length: 1.290"; trim-to length: 1.280"; max cart. OAL: 1.690"; RCBS shell holder: #17; cart. case: IMI Commercial; primer: CCI 400 (except where otherwise specified in remarks); test firearm: Ruger Blackhawk; barrel length: 7.5"; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 90 | Hornady HP-XTP | 10.4 | 1162 | |
![]() | 90 | Hornady HP-XTP | 11.3 | 1270 | |
![]() | 90 | Hornady HP-XTP | 12.1 | 1400 | |
![]() | 90 | Hornady HP-XTP | 13.0 | 1528 | |
![]() | 90 | Hornady HP-XTP | 13.8 | 1651 | |
![]() | 90 | Hornady HP-XTP | 14.5 | 1665 | maximum load |
![]() | 110 | Hornady RN or FMJ | 10.3 | 1049 | Do Not Reduce |
![]() | 110 | Hornady RN or FMJ | 11.6 | 1207 | |
![]() | 110 | Hornady RN or FMJ | 12.8 | 1313 | |
![]() | 110 | Hornady RN or FMJ | 13.5 | 1361 | maximum load |
T/C & Ruger Using Hornady Bullets Gun: Ruger Blackhawk; barrel length: 7 1/2 inches; case: Hornady Frontier; primer: Winchester Small Rifle; bullet diameter: .308"; 90 GR Hornady HP-XTP COAL: 1.510"; 110 GR RN & FMJ COAL: 1.680"; maximum COAL: 1.680"; maximum case length: 1.290"; trim to length: 1.280". |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 100 | Speer JHP | 8.1 | 970 | starting charge; COAL tested: 1.345" |
![]() | 100 | Speer JHP | 9.0 | 1,080 | MAXIMUM charge; COAL tested: 1.345" |
Speer Reloading Manual #14 max. case length: 1.075"; trim-to length: 1.065"; max cart. OAL: 1.350"; RCBS shell holder: #23; cart. case: Federal; primer: CCI 500; test firearm: Ruger Single Six; barrel length: 5.5"; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 90 | Sierra JHC | 7.5 | 961 | |
![]() | 90 | Sierra JHC | 8.3 | 1065 | |
![]() | 90 | Sierra JHC | 9.0 | 1168 | |
Using Sierra bullets Gun: Ruger Single-Six Custom; Barrel Length: 6 1/2 inches; Case: Starline; Primer: Winchester Small Pistol; Bullet Diameter: .312 inch; COAL: 1.350 inches; Maximum COAL: 1.350 inches; Maximum Case Length: 1.075 inches; Trim to Length: 1.070 inches. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 116 | Lyman 311316 GC | 11.0 | 1,282 | extreme spread: 57; 25-yard group: 2.0 inches |
Colt Single Action Army (30,000 CUP) |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 115 | Speer Gold Dot Hollow-Point | 10.0 | 1205 | start charge; compressed load |
![]() | 115 | Speer Gold Dot Hollow-Point | 11.0 | 1254 | max charge; compressed load |
![]() | 100 | Speer Gold Dot Hollow-Point | 11.0 | 1357 | start charge; compressed load |
![]() | 100 | Speer Gold Dot Hollow-Point | 12.0 | 1465 | max charge; compressed load |
Speer Gold Dot Data max. case length: 1.200"; trim-to length: 1.190"; COAL tested: 1.465"; max cart. OAL: 1.475"; RCBS shell holder: #23; cart. case: Federal; primer: Federal 205; test firearm: Ruger SP-101; barrel length: 3". SPECIAL NOTE REGARDING PRIMERS: Due to the high operating pressures, factory ammo for the 327 Federal uses small rifle primers to prevent primer flowback. These handloads were developed with Federal #205 small rifle primers. However, small rifle MAGNUM primers are neither required nor recommended. Maximum loads should be used with CAUTION. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 100 | Hornady XTP-HP | 10.5 | 1177 | primer: CCI 550; case: Speer; OAL (inches): 1.4545 |
![]() | 100 | Hornady XTP-HP | 11.0 | 1221 | primer: CCI 550; case: Speer; OAL (inches): 1.4545 |
![]() | 100 | Hornady XTP-HP | 11.5 | 1238 | primer: CCI 550; case: Speer; OAL (inches): 1.4545 |
![]() | 100 | Speer JHP | 10.0 | 1126 | primer: CCI 550; case: Speer; OAL (inches): 1.4575 |
![]() | 100 | Speer JHP | 11.0 | 1131 | primer: CCI 550; case: Speer; OAL (inches): 1.4575 |
![]() | 100 | Speer JHP | 12.0 | 1199 | primer: CCI 550; case: Speer; OAL (inches): 1.4575 |
Firearm used was a Ruger SP101 with a 3 1/16-inch barrel. Federal Cartridge and Speer cases used as noted. Maximum case length: 1.200 inches. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 100 | Hornady XTP | 10.5 | 1275 | overall loaded length (inches): 1.455 |
![]() | 100 | Hornady XTP | 11.0 | 1304 | overall loaded length (inches): 1.455 |
![]() | 100 | Hornady XTP | 11.5 | 1339 | overall loaded length (inches): 1.455 |
![]() | 100 | Hornady XTP | 12.0 | 1374 | overall loaded length (inches): 1.455 |
![]() | 100 | Hornady XTP | 12.5 | 1402 | overall loaded length (inches): 1.455 |
Handloads A Ruger Single-Seven with a 7 1/2-inch barrel was used to test fire these loads. Federal cases and CCI 500 primers were used throughout. Bullet diameter: .312 and .313 inch; maximum case length: 1.200 inches; trim to length: 1.195 inches. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 100 | Hornady XTP-HP | 10.5 | 1177 | primer: CCI 550; case: Speer; overall loaded length (inches): 1.4545 |
![]() | 100 | Hornady XTP-HP | 11.0 | 1221 | primer: CCI 550; case: Speer; overall loaded length (inches): 1.4545 |
![]() | 100 | Hornady XTP-HP | 11.5 | 1238 | primer: CCI 550; case: Speer; overall loaded length (inches): 1.4545 |
![]() | 100 | Speer JHP | 10.0 | 1126 | primer: CCI 550; case: Speer; overall loaded length (inches): 1.4575 |
![]() | 100 | Speer JHP | 11.0 | 1131 | primer: CCI 550; case: Speer; overall loaded length (inches): 1.4575 |
![]() | 100 | Speer JHP | 12.0 | 1199 | primer: CCI 550; case: Speer; overall loaded length (inches): 1.4575 |
Loads Firearms used for testing these loads was a Ruger SP101 with a 3 1/16-inch barrel. Federal and Speer cases and CCI 500 and CCI 550 primers were used throughout. Case length: 1.200 inches; throat: .313 inch; barrel cylinder gap: .006 inch; groove diameter: .3123 inch. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 110 | Speer UCHP | 19.0 | 1557 | start charge |
![]() | 110 | Speer UCHP | 21.0 | 1693 | maximum charge; compressed load |
![]() | 125 | Speer UCSP, GDHP, UCHP or TMJ FN | 16.8 | 1410 | start charge |
![]() | 125 | Speer UCSP, GDHP, UCHP or TMJ FN | 17.8 | 1443 | maximum charge |
![]() | 140 | Speer UCHP | 14.2 | 1255 | start charge |
![]() | 140 | Speer UCHP | 15.2 | 1365 | maximum charge |
![]() | 158 | Speer TMJ FN, UCHP, GDHP or UCSP | 13.5 | 1102 | start charge |
![]() | 158 | Speer TMJ FN, UCHP, GDHP or UCSP | 15.0 | 1253 | maximum charge |
![]() | 170 | Speer Mag GDSP | 13.2 | 1046 | start charge |
![]() | 170 | Speer Mag GDSP | 13.8 | 1132 | maximum charge |
Speer Reloading Manual #14 max. case length: 1.290"; trim-to length: 1.280"; max cart. OAL: 1.590"; RCBS shell holder: #6; cart. case: Speer; primer: CCI 500 (except where otherwise specified in remarks); test firearm: S&W model 19; barrel length: 6"; NOTE: Do not use the 110-grain Gold Dot SB HP (#4009) in the 357 Magnum; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 110 | XTP | 18.5 | 1716 | start load; compressed; min OAL: 1.575 |
![]() | 110 | XTP | 20.1 | 1909 | never exceed; compressed; min OAL: 1.575 |
![]() | 124 | Lead | 15.7 | 1546 | start load; compressed; min OAL: 1.614 |
![]() | 124 | Lead | 17.4 | 1699 | never exceed; compressed; min OAL: 1.614 |
![]() | 125 | XTP | 16.8 | 1625 | start load; compressed; min OAL: 1.575 |
![]() | 125 | XTP | 18.4 | 1772 | never exceed; compressed; min OAL: 1.575 |
![]() | 140 | Jacketed | 15.7 | 1499 | start load; compressed; min OAL: 1.575 |
![]() | 140 | Jacketed | 17.1 | 1647 | never exceed; compressed; min OAL: 1.575 |
![]() | 145 | Lead | 14.0 | 1475 | start load; compressed; min OAL: 1.614 |
![]() | 145 | Lead | 15.3 | 1591 | never exceed; compressed; min OAL: 1.614 |
![]() | 158 | Jacketed | 14.1 | 1368 | start load; compressed; min OAL: 1.575 |
![]() | 158 | Jacketed | 15.3 | 1502 | never exceed; compressed; min OAL: 1.575 |
![]() | 160 | Lead | 13.2 | 1404 | start load; min OAL: 1.575 |
![]() | 160 | Lead | 14.4 | 1514 | never exceed; compressed; min OAL: 1.575 |
![]() | 180 | Jacketed | 12.7 | 1253 | start load; min OAL: 1.677 |
![]() | 180 | Jacketed | 14.0 | 1394 | never exceed; compressed; min OAL: 1.677 |
![]() | 200 | Jacketed | 11.4 | 1107 | start load; min OAL: 1.697 |
![]() | 200 | Jacketed | 12.4 | 1204 | never exceed; min OAL: 1.697 |
Lee Precision Data Small Pistol Primer. With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 110 | Hornady HP/XTP | 18.5 | 1716 | starting load; OAL (in.): 1.575 |
![]() | 110 | Hornady HP/XTP | 21.2 | 2055 | maximum load; OAL (in.): 1.575 |
![]() | 124 | Intercast LSWC | 17.1 | 1673 | starting load; OAL (in.): 1.614; (the cartridge overall length exceeds the CIP maximum) |
![]() | 124 | Intercast LSWC | 18.7 | 1813 | maximum load; OAL (in.): 1.614; (the cartridge overall length exceeds the CIP maximum) |
![]() | 125 | Hornady FP/XTP | 16.8 | 1601 | starting load; OAL (in.): 1.575 |
![]() | 125 | Hornady FP/XTP | 18.4 | 1772 | maximum load; OAL (in.): 1.575 |
![]() | 140 | Speer HP | 15.8 | 1499 | starting load; OAL (in.): 1.575 |
![]() | 140 | Speer HP | 17.1 | 1647 | maximum load; OAL (in.): 1.575 |
![]() | 145 | Intercast LSWC | 15.1 | 1572 | starting load; OAL (in.): 1.614; (the cartridge overall length exceeds the CIP maximum) |
![]() | 145 | Intercast LSWC | 16.4 | 1677 | maximum load; OAL (in.): 1.614; (the cartridge overall length exceeds the CIP maximum) |
![]() | 158 | Speer HP | 15.1 | 1480 | starting load; OAL (in.): 1.575 |
![]() | 158 | Speer HP | 16.3 | 1602 | maximum load; OAL (in.): 1.575 |
![]() | 160 | Intercast LFN | 14.1 | 1496 | starting load; OAL (in.): 1.575 |
![]() | 160 | Intercast LFN | 15.3 | 1597 | maximum load; OAL (in.): 1.575 |
![]() | 180 | Speer TMJ | 12.7 | 1253 | starting load; OAL (in.): 1.677; (the cartridge overall length exceeds the CIP maximum) |
![]() | 180 | Speer TMJ | 14.0 | 1394 | maximum load; OAL (in.): 1.677; (the cartridge overall length exceeds the CIP maximum) |
![]() | 200 | Speer TMJ | 12.1 | 1188 | starting load; OAL (in.): 1.697; (the cartridge overall length exceeds the CIP maximum) |
![]() | 200 | Speer TMJ | 13.1 | 1277 | maximum load; OAL (in.): 1.697; (the cartridge overall length exceeds the CIP maximum) |
Vihtavuori Reloading Guide 2006 test barrel: 7", 1 in 18 1/2" twist; primers: Small Rifles; cases: Remington, trim-to length: 1.283"; loads less than minimum charges shown are not recommended; USE MAXIMUM LOADS WITH CAUTION! | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 180 | Cast Performance WFNGC | 13.0 | 1,224 | overall loaded length (inches): 1.568 |
for S&W Models 19 & 66 Firearm used for testing was an S&W Model 19 with a 4-inch barrel. Starline cases were used throughout. No loads exceeded 30,000 psi. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 110 | Speer Jacketed HP | 17.8 | 1568 | sugg. start load; 33,900 cup; 1.590" OAL; potentially most accurate load |
![]() | 110 | Speer Jacketed HP | 19.8 | 1693 | max load; 41,300 cup; 1.590" OAL |
![]() | 125 | Hornady Jacketed HP | 14.5 | 1157 | sugg. start load; 26,000 cup; 1.590" OAL |
![]() | 125 | Hornady Jacketed HP | 17.5 | 1371 | max load; compressed load; 38,500 cup; 1.590" OAL |
![]() | 140 | Speer Jacketed HP | 15.3 | 1258 | sugg. start load; 32,200 cup; 1.590" OAL |
![]() | 140 | Speer Jacketed HP | 17.1 | 1505 | max load; 39,900 cup; 1.590" OAL |
![]() | 145 | Winchester Jacketed Silvertip | 14.8 | 1309 | sugg. start load; 1.575" OAL; 34,300 cup; potentially most accurate load |
![]() | 145 | Winchester Jacketed Silvertip | 16.5 | 1434 | max load; 1.575" OAL; 44,800 cup |
![]() | 146 | Speer Jacketed HP | 14.5 | 1075 | sugg. start load; 27,700 cup; 1.590" OAL |
![]() | 146 | Speer Jacketed HP | 16.2 | 1358 | max load; 37,200 cup; 1.590" OAL |
![]() | 158 | Hornady Jacketed HP | 11.5 | 851 | sugg. start load; 21,800 cup; 1.590" OAL |
![]() | 158 | Hornady Jacketed HP | 14.0 | 1139 | max load; 38,200 cup; 1.590" OAL |
![]() | 180 | Hornady Jacketed HP | 10.8 | 814 | sugg. start load; 1.585" OAL; 26,400 cup |
![]() | 180 | Hornady Jacketed HP | 13.5 | 999 | max load; compressed load; 1.585" OAL; 40,800 cup |
Lyman Reloading Manual 49th Edition cases: Federal; trim-to length: 1.280"; primers: CCI 550; primer size: Small Pistol, Magnum; Lyman shell holder: No. 1; firearm used: Universal Receiver; barrel length: 4"; twist: 1-18 3/4"; groove dia.: .356" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 110 | Hornady HP-XTP | 14.7 | 1343 | COAL: 1.590" |
![]() | 110 | Hornady HP-XTP | 15.5 | 1371 | COAL: 1.590" |
![]() | 110 | Hornady HP-XTP | 16.4 | 1409 | COAL: 1.590" |
![]() | 110 | Hornady HP-XTP | 17.3 | 1433 | maximum load; COAL: 1.590" |
![]() | 125 | Hornady HP-XTP or FP-XTP | 13.3 | 1197 | COAL: 1.590" |
![]() | 125 | Hornady HP-XTP or FP-XTP | 13.9 | 1221 | COAL: 1.590" |
![]() | 125 | Hornady HP-XTP or FP-XTP | 14.5 | 1250 | COAL: 1.590" |
![]() | 125 | Hornady HP-XTP or FP-XTP | 15.0 | 1281 | COAL: 1.590" |
![]() | 125 | Hornady HP-XTP or FP-XTP | 15.6 | 1314 | COAL: 1.590" |
![]() | 125 | Hornady HP-XTP or FP-XTP | 16.1 | 1335 | maximum load; COAL: 1.590" |
![]() | 140 | Hornady HP-XTP | 12.7 | 1091 | COAL: 1.590" |
![]() | 140 | Hornady HP-XTP | 13.2 | 1122 | COAL: 1.590" |
![]() | 140 | Hornady HP-XTP | 13.7 | 1162 | COAL: 1.590" |
![]() | 140 | Hornady HP-XTP | 14.2 | 1199 | COAL: 1.590" |
![]() | 140 | Hornady HP-XTP | 14.8 | 1225 | maximum load; COAL; 1.590" |
![]() | 158 | Hornady HP-XTP or FP-XTP | 11.4 | 946 | COAL: 1.590" |
![]() | 158 | Hornady HP-XTP or FP-XTP | 11.8 | 992 | COAL: 1.590" |
![]() | 158 | Hornady HP-XTP or FP-XTP | 12.3 | 1043 | COAL: 1.590" |
![]() | 158 | Hornady HP-XTP or FP-XTP | 12.7 | 1098 | COAL: 1.590" |
![]() | 158 | Hornady HP-XTP or FP-XTP | 13.1 | 1141 | maximum load; COAL; 1.590" |
![]() | 180 | Hornady HP-XTP | 10.5 | 883 | COAL: 1.590" |
![]() | 180 | Hornady HP-XTP | 10.8 | 900 | COAL: 1.590" |
![]() | 180 | Hornady HP-XTP | 11.1 | 927 | COAL: 1.590" |
![]() | 180 | Hornady HP-XTP | 11.4 | 953 | COAL: 1.590" |
![]() | 180 | Hornady HP-XTP | 11.8 | 964 | maximum load; COAL; 1.590" |
Using Hornady Bullets Gun: Ruger GP100; barrel length: 6"; case: Starline; primer: Winchester Small Pistol Magnum; bullet diameter: .357"; maximum COAL: 1.590"; maximum case length: 1.290"; trim to length: 1.280". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 150 | Cast #358477 | 13.2 | 1152 | sugg. start load; 1.510" OAL; 32,400 cup |
![]() | 150 | Cast #358477 | 14.7 | 1374 | max load; 1.510" OAL; 39,900 cup |
![]() | 155 | Cast #358156 gas check | 12.0 | 1074 | sugg. start load; 1.590" OAL; 27,400 cup |
![]() | 155 | Cast #358156 gas check | 15.0 | 1299 | max load; compressed load; 1.590" OAL; 41,800 cup |
![]() | 160 | Cast #358311 | 12.6 | 1054 | sugg. start load; 1.590" OAL; 26,400 cup |
![]() | 160 | Cast #358311 | 14.0 | 1293 | max load; 1.590" OAL; 39,000 cup |
![]() | 170 | Cast #358429 | 12.3 | 1053 | sugg. start load; 1.553" OAL; 33,700 cup |
![]() | 170 | Cast #358429 | 13.7 | 1212 | max load; 1.553" OAL; 40,000 cup |
Cast Bullet Data Lyman Reloading Manual 49th Edition cases: Federal; trim-to length: 1.280"; primers: CCI 550"; primer size: Small Pistol, Magnum; Lyman shell holder: No. 1; cast bullets used sized to .357" dia.; firearm used: Universal Receiver; barrel length: 4"; twist: 1-18 3/4"; groove dia.: .356" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 146 | Spper SWC-HP | 15.0 | 1,435 | 1.55 inch group (25 yards) |
![]() | 180 | Nosler Partition | 11.7 | 1,167 | 2.10 inch group (25 yards) |
in a 7 1/2 inch Ruger Bisley | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 180 | Nosler Partition | 11.7 | 1,141 | primer: Winchester SPM; 6-inch barrel velocity: 1,172 |
in a Ruger GP100 - 4-inch Barrel | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 125 | Hornady Jacketed HP/XTP | 14.5 | 1346 | sugg. start load; 1.590" OAL |
![]() | 125 | Hornady Jacketed HP/XTP | 17.5 | 1801 | max load; 1.590" OAL |
![]() | 146 | Speer Jacketed HP-SWC | 14.5 | 1509 | sugg. start load; 1.590" OAL |
![]() | 146 | Speer Jacketed HP-SWC | 16.0 | 1683 | max load; 1.590" OAL |
![]() | 170 | Cast #358429 | 12.3 | 1305 | sugg. start load; 1.647" OAL |
![]() | 170 | Cast #358429 | 13.7 | 1503 | max load; 1.647" OAL |
in a T/C Contender & Encore Lyman Reloading Manual 49th Edition This data was developed for use in the T/C Contender and Encore handguns. It can also be used in other single shot or bolt-action handguns such as the Remington XP-100 and Savage Striker. Do not use these loads in any other type of handgun. Do not use 357 Magnum loads in 38 Special cases as very dangerous pressure will result. Cases: Federal; trim-to length: 1.280"; primers: CCI 550; primer size: Small Pistol, Magnum; Lyman shell holder: No. 1; cast bullets used sized to .357" dia.; firearm used: Thompson/Center Contender; barrel length: 10"; twist: 1-18"; groove dia.: .356" |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 158 | Copper Plated | 18.6 | 1740 | start load; min OAL: 1.890 |
![]() | 158 | Copper Plated | 20.2 | 1897 | never exceed; min OAL: 1.890 |
![]() | 158 | Barnes X | 17.5 | 1737 | start load; min OAL: 1.890 |
![]() | 158 | Barnes X | 19.4 | 1888 | never exceed; min OAL: 1.890 |
![]() | 180 | Jacketed | 15.5 | 1559 | start load; min OAL: 1.894 |
![]() | 180 | Jacketed | 17.2 | 1695 | never exceed; min OAL: 1.894 |
![]() | 200 | Jacketed | 14.2 | 1361 | start load; min OAL: 2.000 |
![]() | 200 | Jacketed | 16.0 | 1499 | never exceed; min OAL: 2.000 |
Lee Precision Data With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. Small Pistol primer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 125 | Speer UCSP, GDHP or TMJ RN | 20.5 | 2066 | start charge |
![]() | 125 | Speer UCSP, GDHP or TMJ RN | 22.5 | 2224 | maximum charge |
![]() | 140 | Speer UCHP | 19.0 | 1888 | start charge |
![]() | 140 | Speer UCHP | 21.0 | 2029 | maximum charge |
Speer Reloading Manual #14 max. case length: 1.605"; trim-to length: 1.595"; max cart. OAL: 1.990"; RCBS shell holder: #6; cart. case: Remington; primer: CCI 400; test firearm: T/C Contender; barrel length: 14"; NOTE: the 180-gr FN SP and 220-gr bullet is for single-shot firearms only; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 158 | Hornady FP/XTP | 18.7 | 1827 | starting load; COL (in.): 1.890 |
![]() | 158 | Hornady FP/XTP | 19.5 | 1898 | maximum load; COL (in.): 1.890 |
![]() | 158 | Rainier FP | 19.6 | 1834 | starting load; COL (in.): 1.890 |
![]() | 158 | Rainier FP | 20.3 | 1907 | maximum load; COL (in.): 1.890 |
![]() | 180 | Nosler Silhouette | 16.5 | 1640 | starting load; COL (in.): 1.894 |
![]() | 180 | Nosler Silhouette | 17.3 | 1704 | maximum load; COL (in.): 1.894 |
![]() | 200 | Speer TMJ | 15.3 | 1444 | starting load; COL (in.): 2.000; the cartridge overall length exceeds the CIP maximum |
![]() | 200 | Speer TMJ | 16.1 | 1508 | maximum load; COL (in.): 2.000; the cartridge overall length exceeds the CIP maximum |
Vihtavuori Reloading Guide 6 test barrel: 12", 1 in 18 1/2" twist; primers: Small Rifle; cases: Remington, trim-to length: 1.598"; loads less than minimum charges shown are not recommended; USE MAXIMUM LOADS WITH CAUTION! | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 110 | Hornady HP-XTP | 20.2 | 1713 | |
![]() | 110 | Hornady HP-XTP | 20.8 | 1749 | |
![]() | 110 | Hornady HP-XTP | 21.5 | 1785 | |
![]() | 110 | Hornady HP-XTP | 22.2 | 1820 | maximum load |
![]() | 125 | Hornady FP-XTP or HP-XTP | 18.7 | 1562 | |
![]() | 125 | Hornady FP-XTP or HP-XTP | 19.8 | 1593 | maximum load |
![]() | 158 | Hornady FP-XTP or HP-XTP | 15.9 | 1295 | |
![]() | 158 | Hornady FP-XTP or HP-XTP | 16.6 | 1346 | |
![]() | 158 | Hornady FP-XTP or HP-XTP | 17.3 | 1397 | |
![]() | 158 | Hornady FP-XTP or HP-XTP | 18.0 | 1449 | maximum load |
Using Hornady Bullets Gun: Ruger New Model Super Blackhawk; barrel length: 7 1/2 inches; case: Federal; primer: Remington 7 1/2 Small Rifle; bullet diameter: .357"; COAL: 1.890"; maximum COAL: 1.990"; maximum case length: 1.605"; trim to length: 1.595". |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 165 | Speer | 25.2 | 2,122 | energy: 1,650; max. load, SSK barrels only |
This cartridge was designed by J.D. Jones at SSK Industries. Application is to Thompson/Center Encore or Contender single-shot pistols fitted with a custom SSK barrel. Typical barrel length is 10 inches. Cases are formed from empty 44 Magnum cases by simply running the case into a full-length sizing die. Neck length is rather short, which is acceptable for a cartridge used in a single-shot gun. Shoulder angle is 30 degrees. (Cartridges of the World 10th Edition) |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 200 | Speer JHP-SWC | 16.1 | 1197 | start charge |
![]() | 200 | Speer JHP-SWC | 17.9 | 1328 | maximum charge |
![]() | 210 | Speer GDHP | 17.0 | 1136 | start charge |
![]() | 210 | Speer GDHP | 18.0 | 1244 | maximum charge |
![]() | 220 | Speer JSP-SWC | 13.3 | 963 | start charge |
![]() | 220 | Speer JSP-SWC | 14.8 | 1155 | maximum charge |
Speer Reloading Manual #14 max. case length: 1.290"; trim-to length: 1.280"; max cart. OAL: 1.590"; RCBS shell holder: #30; cart. case: Winchester; primer: CCI 300 (except where otherwise specified in remarks); test firearm: S&W Model 57; barrel length: 6"; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 170 | Jacketed | 21.7 | 1654 | start load; compressed; min OAL: 1.579 |
![]() | 170 | Jacketed | 23.5 | 1795 | never exceed; compressed; min OAL: 1.579 |
Lee Precision Data CAUTION: With NEVER EXCEED LOADS; maintain Minimum Over All Length or longer. (Modern Reloading, Second Edition - Richard Lee) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 200 | Speer JHP-SWC | 16.1 | 1,197 | |
![]() | 200 | Speer JHP-SWC | 17.9 | 1,328 | maximum load |
![]() | 210 | Speer JSP-SWC | 13.3 | 963 | can also be used with 220 grain bullet |
![]() | 210 | Speer JSP-SWC | 14.8 | 1,155 | maximum load; can also be used with 220 grain bullet |
Speer Reloading Manual #13 Max. Case Length: 1.290"; Trim-to Length: 1.280"; Max. Cart. Length: 1.590"; RCBS Shellholder: #30; Barrel Length: 6"; Twist: 1-18.75"; Test Firearm: Smith & Wesson Model 57; Case: W-W; Primers: CCI 350; Update: Alliant Powder Company does not recommend Blue Dot in the .41 Magnum for any bullet weights. Their new tests on recent powder samples have shown high pressure spikes that can damage personal property or injure you. For this reason we removed all Blue Dot data from .41 magnum tables. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 210 | Speer GDHP | 17.0 | 1580 | start charge |
![]() | 210 | Speer GDHP | 18.0 | 1690 | maximum charge |
Speer Reloading Manual #14 max. case length: 1.290"; trim-to length: 1.280"; max cart. OAL: 1.590"; RCBS shell holder: #30; cart. case: Winchester; primer: CCI 300 (except where otherwise specified in remarks); test firearm: Marlin 1894; barrel length: 20"; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 170 | Sierra JHC | 21.8 | 1640 | starting load |
![]() | 170 | Sierra JHC | 23.2 | 1746 | maximum load |
![]() | 210 | Hornady HP/XTP | 18.5 | 1430 | starting load |
![]() | 210 | Hornady HP/XTP | 19.8 | 1529 | maximum load |
Vihtavuori Reloading Guide 6 test barrel: 6", 1 in 18 3/4" twist; primers: Large Pistol; cases: W-W Super, trim-to length: 1.280"; COL (in.): 1.579; loads less than minimum charges shown are not recommended; USE MAXIMUM LOADS WITH CAUTION! | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 210 | Hornady HP-XTP | 16.7 | 1162 | |
![]() | 210 | Hornady HP-XTP | 17.3 | 1195 | |
![]() | 210 | Hornady HP-XTP | 18.0 | 1239 | |
![]() | 210 | Hornady HP-XTP | 18.6 | 1282 | |
![]() | 210 | Hornady HP-XTP | 19.2 | 1325 | |
![]() | 210 | Hornady HP-XTP | 19.9 | 1360 | maximum load |
Revolver Using Hornady Bullets Gun: Smith & Wesson Model 57-1; barrel length: 6 inches; case: Starline; primer: Fed 150; bullet diameter: .410"; COAL: 1.580"; maximum COAL: 1.590"; maximum case length: 1.290"; trim to length: 1.280". |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 300 | Speer Plated SP | 20.0 | 1326 | primer: CCI 350; overall loaded length (inches): 1.665 |
![]() | 300 | Speer Plated SP | 21.0 | 1354 | primer: CCI 350; overall loaded length (inches): 1.665 |
![]() | 300 | Speer Plated SP | 22.0 | 1399 | primer: CCI 350; overall loaded length (inches): 1.665; heavily compressed |
![]() | 320 | Cast Performance WLN-GC | 20.0 | 1407 | primer: CCI 350; overall loaded length (inches): 1.700 |
![]() | 320 | Cast Performance WLN-GC | 21.0 | 1427 | primer: CCI 350; overall loaded length (inches): 1.700; compressed, maximum |
![]() | 340 | Rim Rock Bullets LWN-GC | 17.5 | 1280 | primer: CCI 350; overall loaded length (inches): 1.772 |
![]() | 340 | Rim Rock Bullets LWN-GC | 18.5 | 1322 | primer: CCI 350; overall loaded length (inches): 1.772 |
![]() | 340 | Rim Rock Bullets LWN-GC | 19.0 | 1361 | primer: CCI 350; overall loaded length (inches): 1.772; compressed, maximum |
+P Handloading Data A 7 1/2-inch barreled Ruger Redhawk was used to fire all loads. Starline cases were used throughout. Temperature during testing was 20 degrees Fahrenheit. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 200 | Barnes XPB | 20.0 | 1,476 | primer: CCI 300 |
Barnes X-Pistol Bullets A Ruger New Model Blackhawk Bisley with 5 1/2-inch barrel used for testing the .44 Magnum loads. Hornady cases used throughout. Overall cartridge length: 1.595 inches. Temperature: 92 degrees Fahrenheit. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 225 | Speer SWC GC | 18.0 | 1278 | start charge |
![]() | 225 | Speer SWC GC | 20.0 | 1407 | maximum charge |
![]() | 250 | Speer K | 17.0 | 1238 | start charge |
![]() | 250 | Speer K | 19.0 | 1346 | maximum charge |
![]() | 200 | Speer Mag JHP | 22.0 | 1513 | start charge |
![]() | 200 | Speer Mag JHP | 24.0 | 1662 | maximum charge |
![]() | 210 | Speer Mag GDHP | 21.0 | 1434 | start charge |
![]() | 210 | Speer Mag GDHP | 23.0 | 1607 | maximum charge |
![]() | 225 | Speer JHP-SWC | 20.0 | 1471 | start charge |
![]() | 225 | Speer JHP-SWC | 22.0 | 1557 | maximum charge; compressed load |
![]() | 240 | Speer Mag JHP, Mag GDHP, Mag GDSP or Mag JSP | 18.0 | 1307 | start charge |
![]() | 240 | Speer Mag JHP, Mag GDHP, Mag GDSP or Mag JSP | 20.0 | 1382 | maximum charge |
![]() | 270 | Speer Mag GDSP | 16.0 | 1184 | start charge |
![]() | 270 | Speer Mag GDSP | 18.0 | 1265 | maximum charge |
Speer Reloading Manual #14 max. case length: 1.285"; trim-to length: 1.275"; max cart. OAL: 1.610"; RCBS shell holder: #18; cart. case: Speer; primer: CCI 300 (except where otherwise specified in remarks); test firearm: Ruger Redhawk; barrel length: 7.5"; NOTE: The 225-grain SWC GC and 250-grain K bullets were cast in RCBS moulds; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 180 | XTP | 24.7 | 1585 | start load; compressed; min OAL: 1.602 |
![]() | 180 | XTP | 26.2 | 1686 | never exceed; compressed; min OAL: 1.602 |
![]() | 200 | XTP | 23.7 | 1577 | start load; compressed; min OAL: 1.602 |
![]() | 200 | XTP | 26.2 | 1729 | never exceed; compressed; min OAL: 1.602 |
![]() | 240 | Jacketed | 19.8 | 1386 | start load; compressed; min OAL: 1.602 |
![]() | 240 | Jacketed | 21.9 | 1531 | never exceed; compressed; min OAL: 1.602 |
![]() | 267 | Lead | 19.8 | 1347 | start load; compressed; min OAL: 1.620 |
![]() | 267 | Lead | 21.7 | 1468 | never exceed; compressed; min OAL: 1.681 |
![]() | 300 | Jacketed | 17.3 | 1176 | start load; min OAL: 1.717 |
![]() | 300 | Jacketed | 18.9 | 1296 | never exceed; min OAL: 1.717 |
![]() | 300 | XTP | 18.1 | 1218 | start load; min OAL: 1.717 |
![]() | 300 | XTP | 20.1 | 1363 | never exceed; compressed; min OAL: 1.717 |
Lee Precision Data Large pistol primer. CAUTION: With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 270 | Belt Mountain Punch Solid | 17.0 | 1017 | primer: CCI 350 |
![]() | 270 | Belt Mountain Punch Solid | 18.5 | 1175 | primer: CCI 350 |
(Punch Solid) A Smith & Wesson Model 629-4 with a 6-inch barrel was used to fire the loads. Starline cases were used throughout. Maximum case length: 1.285 inches; trim-to length: 1.275 inches; cartridge length: 1.670 inches. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 270 | Speer Gold Dot | 17.5 | 1,240 | primer: CCI 300 |
(Ruger Blackhawk Flattop) Barrel length in firearm used was 6 1/2 inches. Temperature during field tests was 88 degrees Fahrenheit. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 225 | Speer JHP | 19.8 | 1,322 | group: 3.00 inches |
![]() | 240 | Sierra JHC | 20.0 | 1,319 | group: 2.75 inches |
![]() | 295 | BRP SWC | 17.4 | 1,153 | group: 2.50 inches |
(Ruger Super Blackhawk) Handloads were fired from a 7 1/2-inch barreled Ruger Super Blackhawk. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 200 | Speer JHP | 22.0 | 1816 | start charge |
![]() | 200 | Speer JHP | 24.0 | 1984 | maximum charge |
![]() | 210 | Speer GDHP | 21.0 | 1735 | start charge |
![]() | 210 | Speer GDHP | 23.0 | 1912 | maximum charge |
![]() | 240 | Speer JHP, GDHP, GDSP or JSP | 18.0 | 1545 | start charge |
![]() | 240 | Speer JHP, GDHP, GDSP or JSP | 20.0 | 1647 | maximum charge |
![]() | 270 | Speer GDSP | 16.0 | 1363 | start charge |
![]() | 270 | Speer GDSP | 18.0 | 1472 | maximum charge |
Speer Reloading Manual #14 max. case length: 1.285"; trim-to length: 1.275"; max cart. OAL: 1.610"; RCBS shell holder: #18; cart. case: Winchester; primer: CCI 300 (except where otherwise specified in remarks); test firearm: Marlin M1894; barrel length: 20"; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 180 | Hornady HP-XTP | 25.2 | 1614 | starting load; COL (in.): 1.602 |
![]() | 180 | Hornady HP-XTP | 27.1 | 1751 | maximum load; COL (in.): 1.602 |
![]() | 200 | Hornady HP-XTP | 24.4 | 1621 | starting load; COL (in.): 1.602 |
![]() | 200 | Hornady HP-XTP | 26.3 | 1740 | maximum load; COL (in.): 1.602 |
![]() | 240 | Hornady JTC-SIL | 20.4 | 1427 | starting load; COL (in.): 1.602 |
![]() | 240 | Hornady JTC-SIL | 22.1 | 1541 | maximum load; COL (in.): 1.602 |
![]() | 267 | Intercast LFN | 20.4 | 1385 | starting load; COL (in.): 1.681; the cartridge overall length exceeds the CIP maximum |
![]() | 267 | Intercast LFN | 21.8 | 1476 | maximum load; COL (in.): 1.681; the cartridge overall length exceeds the CIP maximum |
![]() | 300 | Hornady HP-XTP | 18.7 | 1260 | starting load; COL (in.): 1.717; the cartridge overall length exceeds the CIP maximum |
![]() | 300 | Hornady HP-XTP | 20.2 | 1374 | maximum load; COL (in.): 1.717; the cartridge overall length exceeds the CIP maximum |
![]() | 300 | Sierra JSP | 17.7 | 1211 | starting load; COL (in.): 1.717; the cartridge overall length exceeds the CIP maximum |
![]() | 300 | Sierra JSP | 19.1 | 1305 | maximum load; COL (in.): 1.717; the cartridge overall length exceeds the CIP maximum |
Vihtavuori Reloading Guide 6 test barrel: 7", 1 in 20" twist; primers: Large Pistol; cases: Remington, trim-to length: 1.275"; loads less than minimum charges shown are not recommended; USE MAXIMUM LOADS WITH CAUTION! | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 210 | Cast #429215 gas check | 19.3 | 1180 | sugg. start load; 1.645" OAL; 21,200 cup |
![]() | 210 | Cast #429215 gas check | 21.5 | 1413 | max load; 1.645" OAL; 38,200 cup |
![]() | 240 | Cast #429667 | 18.0 | 1064 | sugg. start load; 1.645" OAL; 28,700 cup |
![]() | 240 | Cast #429667 | 20.0 | 1283 | max load; 1.645" OAL; 37,900 cup |
![]() | 245 | Cast #429421 | 18.0 | 1034 | sugg. start load; 1.710" OAL; 25,900 cup |
![]() | 245 | Cast #429421 | 20.0 | 1300 | max load; 1.710" OAL; 38,800 cup |
![]() | 300 | Cast #429650 gas check | 14.2 | 873 | sugg. start load; 1.700" OAL; 24,300 cup |
![]() | 300 | Cast #429650 gas check | 16.0 | 1029 | max load; 1.700" OAL; 34,800 cup |
Cast Bullet Handgun Data Lyman Reloading Handbook 49th Edition cases: Remington; trim-to length: 1.275"; primers: CCI 300 (except where otherwise specified in remarks); primer size: Large Pistol, Std. & Magnum; Lyman shell holder: No. 7; cast bullets used sized to .429" dia.; firearm used: Universal Receiver; barrel length: 4"; twist: 1-20"; groove dia.: .429" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 240 | Speer Jacketed Soft Point | 20.0 | 1,341 | primer: CCI 300 |
![]() | 270 | Speer Gold Dot | 16.5 | 1,145 | primer: CCI 300 |
Full-Power Loads All Smith & Wesson Models 29, 629 and 329PD. A Smith & Wesson (pre-29) .44 Magnum revolver with a 6 1/2-inch barrel used to test loads. Winchester and Starline cases used throughout. These loads DO NOT exceed SAAMI recommended pressure limits of 36,000 psi, but they should be used sparingly in guns produced before 1988 and avoid using jacketed bullet loads in the early four-and five-screw guns. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 200 | Hornady Jacketed HP | 21.0 | 1142 | sugg. start load; 25,500 cup |
![]() | 200 | Hornady Jacketed HP | 24.0 | 1381 | max load; compressed powder charge; 38,700 cup |
![]() | 210 | Winchester Jacketed Silvertip | 21.3 | 1111 | sugg. start load; 1.590" OAL; 25,700 cup |
![]() | 210 | Winchester Jacketed Silvertip | 23.7 | 1311 | max load; compressed powder charge; 1.590" OAL; 37,500 cup |
![]() | 225 | Speer Jacketed HP | 19.0 | 1168 | sugg. start load; 30,800 cup |
![]() | 225 | Speer Jacketed HP | 21.1 | 1354 | max load; 38,000 cup |
![]() | 240 | Sierra Jacketed HC | 17.3 | 999 | sugg. start load; 25,500 cup |
![]() | 240 | Sierra Jacketed HC | 19.5 | 1189 | max load; compressed powder charge; 37,400 cup |
![]() | 240 | Speer Jacketed HP | 18.7 | 1052 | sugg. start load; 31,000 cup |
![]() | 240 | Speer Jacketed HP | 20.8 | 1217 | max load; 39,400 cup |
![]() | 265 | Hornady Jacketed FP | 16.6 | 965 | sugg. start load; 29,800 cup |
![]() | 265 | Hornady Jacketed FP | 18.5 | 1133 | max load; 38,900 cup |
![]() | 270 | Speer Jacketed GDSP | 16.2 | 960 | sugg. start load; 1.585" OAL; 25,900 cup |
![]() | 270 | Speer Jacketed GDSP | 18.2 | 1125 | max load; 1.585" OAL; 38,600 cup |
![]() | 300 | Sierra Jacketed SP | 16.0 | 870 | sugg. start load; 1.720" OAL; 27,000 cup |
![]() | 300 | Sierra Jacketed SP | 17.5 | 965 | max load; 1.720" OAL; 33,600 cup |
Lyman Reloading Handbook 49th Edition cases: Remington; trim-to length: 1.275"; primers: CCI 300 (except where otherwise specified in remarks); primer size: Large Pistol, Std. & Magnum; Lyman shell holder: No. 7; firearm used: Universal Receiver; barrel length: 4"; twist: 1-20"; groove dia.: .429"; 1.610" OAL (except where otherwise specified in remarks) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 265 | Hornady Jacketed FP | 16.6 | 1224 | 10" Bbl.; sugg. start load; 1.650" OAL |
![]() | 265 | Hornady Jacketed FP | 16.6 | 1252 | 14" Bbl.; sugg. start load; 1.650" OAL |
![]() | 265 | Hornady Jacketed FP | 18.5 | 1360 | 10" Bbl.; max load; 1.650" OAL |
![]() | 265 | Hornady Jacketed FP | 18.5 | 1398 | 14" Bbl.; max load; 1.650" OAL |
![]() | 265 | Hornady Jacketed FP | 16.6 | 1224 | 10" Bbl.; sugg. start load; 1.650" OAL |
![]() | 265 | Hornady Jacketed FP | 16.6 | 1252 | 14" Bbl.; sugg. start load; 1.650" OAL |
![]() | 265 | Hornady Jacketed FP | 18.5 | 1360 | 10" Bbl.; max load; 1.650" OAL |
![]() | 265 | Hornady Jacketed FP | 18.5 | 1398 | 14" Bbl.; max load; 1.650" OAL |
![]() | 265 | Hornady Jacketed FP | 16.6 | 1224 | 10" Bbl.; sugg. start load; 1.650" OAL |
![]() | 265 | Hornady Jacketed FP | 16.6 | 1252 | 14" Bbl.; sugg. start load; 1.650" OAL |
![]() | 265 | Hornady Jacketed FP | 18.5 | 1360 | 10" Bbl.; max load; 1.650" OAL |
![]() | 265 | Hornady Jacketed FP | 18.5 | 1398 | 14" Bbl.; max load; 1.650" OAL |
![]() | 210 | Cast #429215 gas check | 19.3 | 1398 | 10" Bbl.; sugg. start load; 1.645" OAL |
![]() | 210 | Cast #429215 gas check | 19.3 | 1542 | 14" Bbl.; sugg. start load; 1.645" OAL |
![]() | 210 | Cast #429215 gas check | 21.5 | 1552 | 10" Bbl.; max load; 1.645" OAL |
![]() | 210 | Cast #429215 gas check | 21.5 | 1681 | 14" Bbl.; max load; 1.645" OAL |
in a T/C Contender & Encore Lyman Reloading Manual 49th Edition This data was developed for use in the T/C Contender and Encore handguns. It can also be used in other single shot or bolt-action handguns such as the Remington XP-100 and Savage Striker. Do not use these loads in any other type of handgun. Cases: Remington; trim-to length: 1.275"; primers: CCI 300 (except where otherwise specified in remarks); primer size: Large Pistol, Std. & Magnum; Lyman shell holder: No. 7; cast bullets used sized to .430" dia.; firearm used: Thompson/Center Contender; barrel length: 10" and 14"; twist: 1-22"; groove dia.: .430" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 240 | Speer jacketed softpoint | 20.0 | 1,312 | primer: CCI 300; brass: Winchester |
![]() | 270 | Speer Gold Dot | 16.5 | 1,122 | primer: CCI 300; brass: Winchester; 1 3/4-inch group |
![]() | 310 | cast Keith Mt. Baldy | 17.5 | 1,123 | primer: Federal 150; brass: Starline |
in an S&W Model 329PD Loads fired from a Smith & Wesson Model 329PD with a 4-inch barrel. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 180 | Hornady HP-XTP | 20.1 | 1066 | |
![]() | 180 | Hornady HP-XTP | 21.6 | 1190 | |
![]() | 180 | Hornady HP-XTP | 23.2 | 1334 | |
![]() | 180 | Hornady HP-XTP | 24.7 | 1477 | |
![]() | 180 | Hornady HP-XTP | 26.2 | 1615 | maximum load |
Revolver Using 180 GR Hornady Bullets Gun: Ruger New Model Blackhawk (Bisley); barrel length: 5 1/2-inches; case: Starline; primer: Winchester Large Pistol; bullet diameter: .430"; maximum COAL: 1.610"; maximum case length: 1.285"; trim to length: 1.275"; COAL: 1.600". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 200 | Hornady HP-XTP | 21.0 | 1196 | |
![]() | 200 | Hornady HP-XTP | 22.2 | 1275 | |
![]() | 200 | Hornady HP-XTP | 23.5 | 1367 | |
![]() | 200 | Hornady HP-XTP | 24.1 | 1460 | |
![]() | 200 | Hornady HP-XTP | 24.8 | 1546 | maximum load |
Revolver Using 200 GR Hornady Bullets Gun: Ruger New Model Blackhawk (Bisley); barrel length: 5 1/2-inches; case: Starline; primer: Winchester Large Pistol; bullet diameter: .430"; maximum COAL: 1.610"; maximum case length: 1.285"; trim to length: 1.275"; COAL: 1.600". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 240 | Hornady HP-XTP or CL-SIL | 17.6 | 1045 | |
![]() | 240 | Hornady HP-XTP or CL-SIL | 18.7 | 1122 | |
![]() | 240 | Hornady HP-XTP or CL-SIL | 19.9 | 1215 | |
![]() | 240 | Hornady HP-XTP or CL-SIL | 20.5 | 1306 | |
![]() | 240 | Hornady HP-XTP or CL-SIL | 21.3 | 1392 | maximum load |
Revolver Using 240 GR Hornady Bullets Gun: Ruger New Model Blackhawk (Bisley); barrel length: 5 1/2-inches; case: Starline; primer: Winchester Large Pistol; bullet diameter: .430"; Hornady HP-XTP and CL-SIL COAL: 1.600"; SWC-HP and SWC COAL: 1.610"; maximum COAL: 1.610"; maximum case length: 1.285"; trim to length: 1.275". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 265 | Hornady FP | 17.3 | 1098 | |
![]() | 265 | Hornady FP | 18.4 | 1185 | |
![]() | 265 | Hornady FP | 19.4 | 1272 | maximum load |
Revolver Using 265 GR Hornady Bullets Gun: Ruger New Model Blackhawk (Bisley); barrel length: 5 1/2-inches; case: Starline; primer: Winchester Large Pistol; bullet diameter: .430"; maximum COAL: 1.610"; maximum case length: 1.285"; trim to length: 1.275"; COAL: 1.610". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 300 | Hornady HP-XTP | 14.9 | 1043 | |
![]() | 300 | Hornady HP-XTP | 15.5 | 1076 | |
![]() | 300 | Hornady HP-XTP | 16.1 | 1108 | |
![]() | 300 | Hornady HP-XTP | 16.6 | 1143 | maximum load |
Revolver Using 300 GR Hornady Bullets Gun: Ruger New Model Blackhawk (Bisley); barrel length: 5 1/2-inches; case: Starline; primer: Winchester Large Pistol; bullet diameter: .430"; maximum COAL: 1.600"; maximum case length: 1.285"; trim to length: 1.275"; COAL: 1.610". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 200 | Hornady HP-XTP | 23.3 | 1626 | |
![]() | 200 | Hornady HP-XTP | 23.8 | 1660 | |
![]() | 200 | Hornady HP-XTP | 24.4 | 1702 | |
![]() | 200 | Hornady HP-XTP | 24.9 | 1743 | |
![]() | 200 | Hornady HP-XTP | 25.5 | 1783 | maximum load |
![]() | 240 | Hornady HP-XTP or CL-SIL | 20.7 | 1460 | |
![]() | 240 | Hornady HP-XTP or CL-SIL | 21.2 | 1519 | maximum load |
![]() | 265 | Hornady FP | 18.4 | 1299 | |
![]() | 265 | Hornady FP | 18.9 | 1337 | |
![]() | 265 | Hornady FP | 19.3 | 1375 | maximum load |
![]() | 300 | Hornady HP-XTP | 15.5 | 1119 | |
![]() | 300 | Hornady HP-XTP | 15.9 | 1152 | |
![]() | 300 | Hornady HP-XTP | 16.4 | 1185 | maximum load |
TC Using Hornady Bullets Gun: Thompson/Center G-2 Contender; barrel length: 10 inches; case: Starline; primer: Winchester Large Pistol; bullet diameter: .430"; 200, 240 & 300 GR Hornady HP-XTP and 240 GR CL-SIL COAL: 1.600"; 265 Hornady FP COAL: 1.610"; maximum COAL: 1.610"; maximum case length: 1.285"; trim to length: 1.275". |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 225 | Speer JHP | 21.0 | 1209 | start charge |
![]() | 225 | Speer JHP | 23.0 | 1339 | maximum charge; compressed load |
![]() | 250 | Speer Colt GDHP | 18.0 | 1003 | start charge |
![]() | 250 | Speer Colt GDHP | 20.0 | 1148 | maximum charge |
Ruger & Contender Only Speer Reloading Manual #14 max. case length: 1.285"; trim-to length: 1.275"; max cart. OAL: 1.600"; RCBS shell holder: #20; cart. case: Winchester; primer: CCI 300 (except where otherwise specified in remarks); test firearm: Ruger Blackhawk; barrel length: 7.5"; maximum loads should be used with CAUTION; NOTE: Do not use in any other make or model firearm. IMPORTANT SAFETY NOTE: Since Speer #14 Manual was published, Ruger has replaced the original Vaquero revolver with a smaller version called the New Vaquero. Ruger has advised the industry that the New Vaquero must not be fired with loads exceeding industry pressure standards (14,000 psi). If loading for a New Vaquero, use the standard pressure data in the .45 Colt Handgun Speer Data. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 260 | Speer JHP | 22.0 | 1,301 | velocity spread: 26 fps; 25-yard group: 2.2 inches |
+P Handloads The .45 Colt +P handloads are for Ruger, Freedom Arms and Colt Anaconda only! Test gun was a Ruger Blackhawk with a 6-inch barrel. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 255 | Speer SWC | 15.8 | 809 | start charge |
![]() | 255 | Speer SWC | 16.8 | 914 | maximum charge |
![]() | 230 | Speer GDHP SB or GDHP or 225 JHP | 16.0 | 778 | start charge |
![]() | 230 | Speer GDHP SB or GDHP or 225 JHP | 18.0 | 946 | maximum charge |
![]() | 250 | Speer Colt GDHP | 16.0 | 843 | maximum charge; DO NOT REDUCE |
Handgun Speer Reloading Manual #14 max. case length: 1.285"; trim-to length: 1.275"; max cart. OAL: 1.600"; RCBS shell holder: #20; cart. case: Winchester; primer: CCI 300 (except where otherwise specified in remarks); test firearm: Colt Single Action Army; barrel length: 5.5"; NOTE: the 255 SWC, 225 CAV & 230 CM bullets were cast in RCBS moulds; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 225 | Speer JHP | 21.0 | 1093 | overall loaded length (inches): 1.587 |
![]() | 225 | Speer JHP | 22.0 | 1160 | overall loaded length (inches): 1.587 |
in a Ruger New Model Blackhawk (+P Pressure 23,000 psi) These loads exceed SAAMI pressure limits for the .45 Colt and should only be used in Ruger New Model Blackhawk revolvers, or firearms of similar strength. Barrel length: 5 1/2 inches; Starline cases used throughout. CCI 300 primers used in all loads except with H-110 powder, where Federal 155 primers were used. Temperature during testing was 70 to 85 degrees Fahrenheit. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 285 | RCBS 45-270-SAA cast | 16.0 | 894 | |
Load Data ( 14,000 psi) primer: CCI 300 | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 300 | Hornady XTP-MAG or HP-XTP | 16.0 | 1048 | |
![]() | 300 | Hornady XTP-MAG or HP-XTP | 16.6 | 1107 | |
![]() | 300 | Hornady XTP-MAG or HP-XTP | 17.2 | 1166 | |
![]() | 300 | Hornady XTP-MAG or HP-XTP | 17.8 | 1224 | maximum load |
T/C & Ruger Using Hornady Bullets Gun: Thompson/Center Encore; barrel length: 12 inches; case: Starline; primer: Winchester WLP; bullet diameter: .452"; 240 and 300 GR Hornady XTP-MAG COAL: 1.655"; 250 HP-XTP COAL: 1.595"; 300 HP-XTP COAL: 1.580"; maximum COAL: 1.600"; maximum case length: 1.285"; trim to length: 1.275". |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 200 | Jacketed | 24.1 | 1818 | start load; compressed charge; min OAL: 1.516 |
![]() | 200 | Jacketed | 26.3 | 1962 | never exceed; compressed charge; min OAL: 1.516 |
![]() | 230 | Jacketed | 22.8 | 1656 | start load; compressed charge; min OAL: 1.555 |
![]() | 230 | Jacketed | 25.0 | 1804 | never exceed; compressed charge; min OAL: 1.555 |
![]() | 250 | XTP | 19.8 | 1463 | start load; min OAL: 1.504 |
![]() | 250 | XTP | 22.4 | 1640 | never exceed; min OAL: 1.504 |
Lee Precision Data Large Pistol primer; with NEVER EXCEED LOADS maintain Minimum Over All Length or longer (Modern Reloading - Second Edition - Richard Lee) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 200 | Speer TMJ-SWC | 22.9 | 1731 | starting load; COL (in.): 1.516 |
![]() | 200 | Speer TMJ-SWC | 25.2 | 1885 | maximum load; COL (in.): 1.516 |
![]() | 230 | Hornady FMJ-RN | 21.8 | 1622 | starting load; COL (in.): 1.555 |
![]() | 230 | Hornady FMJ-RN | 23.9 | 1744 | maximum load; COL (in.): 1.555 |
![]() | 250 | Hornady HP/XTP | 18.4 | 1448 | starting load; COL (in.): 1.504 |
![]() | 250 | Hornady HP/XTP | 21.1 | 1576 | maximum load; COL (in.): 1.504 |
Vihtavuori Reloading Guide 6 test barrel: 12", 1 in 16" twist; primers: Large Pistol; cases: Winchester, trim-to length: 1.192"; loads less than minimum charges shown are not recommended; USE MAXIMUM LOADS WITH CAUTION! |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 225 | Jacketed | 30.8 | 1864 | start load; compressed charge; min OAL: 1.681 |
![]() | 225 | Jacketed | 33.5 | 2005 | never exceed; compressed charge; min OAL: 1.681 |
![]() | 250 | XTP | 28.1 | 1719 | start load; compressed charge; min OAL: 1.685 |
![]() | 250 | XTP | 30.7 | 1873 | never exceed; compressed charge; min OAL: 1.685 |
![]() | 300 | Jacketed | 26.3 | 1555 | start load; compressed charge; min OAL: 1.752 |
![]() | 300 | Jacketed | 28.7 | 1686 | never exceed; compressed charge; min OAL: 1.752 |
Lee Precision Data With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. Small Rifle primer. NOTE: Industry standard cup pressure is 53,000. Some of the hard core bullet loads exceed this value. Use maximum loads with caution. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 225 | Speer Jacketed HP | 28.9 | 1650 | sugg. start load; 1.690" OAL; 42,300 cup |
![]() | 225 | Speer Jacketed HP | 30.5 | 1735 | max load; compressed powder charge; 1.690" OAL; 49,800 cup; potentially most accurate load |
![]() | 240 | Hornady Jacketed HP Mag-XTP | 26.8 | 1551 | sugg. start load; 1.745" OAL; 41,100 cup |
![]() | 240 | Hornady Jacketed HP Mag-XTP | 28.3 | 1621 | max load; 1.745" OAL; 46,500 cup |
![]() | 250 | Barnes XPB HP | 26.6 | 1588 | sugg. start load; 1.770" OAL; 49,300 cup |
![]() | 250 | Barnes XPB HP | 28.0 | 1615 | max load; compressed powder charge; 1.770" OAL; 53,400 cup |
![]() | 300 | Hornady Jacketed HP Mag-XTP | 23.3 | 1323 | sugg. start load; 1.745" OAL; 43,200 cup |
![]() | 300 | Hornady Jacketed HP Mag-XTP | 24.6 | 1437 | max load; 1.745" OAL; 48,400 cup |
![]() | 225 | Cast #452490 gas check | 26.3 | 1531 | sugg. start load; 1.760" OAL; 42,700 cup |
![]() | 225 | Cast #452490 gas check | 27.7 | 1575 | max load; 1.760" OAL; 44,700 cup |
![]() | 325 | Cast #452651 gas check | 20.4 | 1242 | sugg. start load; 1.755" OAL; 30,200 cup |
![]() | 325 | Cast #452651 gas check | 22.7 | 1368 | max load; 1.755" OAL; 42,700 cup |
Lyman Reloading Handbook 49th Edition cases: Winchester; trim-to length: 1.378"; primers: CCI 450; primer size: Small Rifle, Magnum; Lyman shell holder: No. 11; firearm used: Universal Receiver; barrel length: 6"; twist: 1-24"; groove dia.: .451" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 240 | Hornady XTP-MAG | 28.4 | 1604 | |
![]() | 240 | Hornady XTP-MAG | 29.4 | 1652 | |
![]() | 240 | Hornady XTP-MAG | 30.4 | 1709 | |
![]() | 240 | Hornady XTP-MAG | 31.4 | 1744 | |
![]() | 240 | Hornady XTP-MAG | 32.4 | 1789 | maximum load |
![]() | 300 | Hornady XTP-MAG | 24.4 | 1362 | |
![]() | 300 | Hornady XTP-MAG | 25.3 | 1401 | |
![]() | 300 | Hornady XTP-MAG | 26.2 | 1449 | |
![]() | 300 | Hornady XTP-MAG | 27.1 | 1490 | maximum load |
Using Hornady Bullets Gun: Freedom Arms Model 83; barrel length: 7 1/2 inches; case: Starline; primer: Fed. #205; bullet diameter: .452"; COAL: 1.745"; maximum COAL: 1.765"; maximum case length: 1.383"; trim to length: 1.373". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 225 | Speer HP | 30.9 | 1857 | starting load; COL (in.): 1.681 |
![]() | 225 | Speer HP | 33.5 | 2014 | maximum load; COL (in.): 1.681 |
![]() | 250 | Hornady HP/XTP | 28.1 | 1716 | starting load; COL (in.): 1.685 |
![]() | 250 | Hornady HP/XTP | 30.7 | 1867 | maximum load; COL (in.): 1.685 |
![]() | 300 | Speer Plated HP | 26.4 | 1555 | starting load; COL (in.): 1.752 |
![]() | 300 | Speer Plated HP | 28.7 | 1686 | maximum load; COL (in.): 1.752 |
Vihtavuori Reloading Guide 6 test barrel: 9 1/2", 1 in 24" twist; primers: Small Rifle; cases: Freedom Arms, trim-to length: 1.311"; loads less than minimum charges shown are not recommended; USE MAXIMUM LOADS WITH CAUTION! | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 300 | Speer GDHP | 25.5 | 1446 | start charge |
![]() | 300 | Speer GDHP | 27.5 | 1549 | maximum charge |
Full Power Loads Speer Reloading Manual #14 max. case length: 1.383"; trim-to length: 1.373"; max cart. OAL: 1.765"; RCBS shell holder: #20; cart. case: Winchester; primer: CCI 400; test firearm: Freedom Arms; barrel length: 7.5"; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 260 | Nosler Partition-HG Hollow Point | 28.5 | 1,855 | maximum load; compressed load; most accurate load tested |
![]() | 260 | Nosler Partition-HG Hollow Point | 27.5 | 1,815 | compressed load |
![]() | 260 | Nosler Partition-HG Hollow Point | 26.5 | 1,774 | compressed load |
![]() | 300 | Nosler Partition-HG Protected Point | 25.0 | 1,588 | maximum load; compressed load |
![]() | 300 | Nosler Partition-HG Protected Point | 24.0 | 1,542 | compressed load; most accurate load tested |
![]() | 300 | Nosler Partition-HG Protected Point | 23.0 | 1,499 | compressed load |
Using Nosler Bullets handgun: barrel: T/C Encore, length: 12", twist: 1-16"; case: Winchester; primer: WSR; maximum SAAMI overall cartridge length: 1.765"; use maximum loads with caution | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 300 | Speer UCSP | 20.0 | 1220 | start charge; case: Winchester |
![]() | 300 | Speer UCSP | 22.0 | 1322 | maximum charge; case: Winchester |
![]() | 250 | Speer Colt GDHP or 260 JHP | 23.0 | 1381 | start charge; case: Starline |
![]() | 250 | Speer Colt GDHP or 260 JHP | 25.0 | 1499 | maximum charge; case: Starline |
Reduced Recoil Loads Speer Reloading Manual #14 max. case length: 1.383"; trim-to length: 1.373"; max cart. OAL: 1.765"; RCBS shell holder: #20; cart. case: Winchester and Starline; primer: CCI 400; test firearm: Freedom Arms; barrel length: 7.5"; NOTE: The 270 grain SAA bullets were cast in RCBS moulds; use maximum loads with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 300 | Hornady XTP-HP | 27.0 | 1,460 | |
in a Freedom Arms Model 83 (4 3/4-inch barrel) Freedom Arms Model 83 with barrel length of 4 3/4 inches. Remington 7 1/2 and Federal 205 (Small Rifle Magnum) primers and Starline cases used throughout. Maximum case length is 1.383 inches and trim-to length is 1.373 inches. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 300 | Hornady XTP-HP | 27.0 | 1,532 | |
in a Freedom Arms Model 83 (7 1/2-inch barrel) Freedom Arms Model 83 with barrel length of 7 1/2 inches. Remington 7 1/2 and Federal 205 (Small Rifle Magnum) primers and Starline cases used throughout. Maximum case length is 1.383 inches and trim-to length is 1.373 inches. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 240 | Hornady Mag Jacketed XTP/HP | 26.8 | 1682 | sugg. start load; 1.745" OAL; potentially most accurate load |
![]() | 240 | Hornady Mag Jacketed XTP/HP | 28.3 | 1771 | max load; 1.745" OAL |
![]() | 300 | Hornady Mag Jacketed XTP/HP | 23.3 | 1473 | sugg. start load; 1.745" OAL |
![]() | 300 | Hornady Mag Jacketed XTP/HP | 24.6 | 1521 | max load; 1.745" OAL |
![]() | 255 | Cast #452490 gas check | 26.3 | 1696 | sugg. start load; 1.760" OAL |
![]() | 255 | Cast #452490 gas check | 27.7 | 1783 | max load; 1.760" OAL |
![]() | 325 | Cast #452651 gas check | 20.4 | 1363 | sugg. start load; 1.755" OAL |
![]() | 325 | Cast #452651 gas check | 22.7 | 1497 | max load; 1.755" OAL |
in a T/C Contender & Encore Lyman Reloading Manual 49th Edition This data was developed for use in the T/C Contender and Encore handguns. It can also be used in other single shot or bolt-action handguns such as the Remington XP-100 and Savage Striker. Do not use these loads in any other type of handgun. Cases: Winchester; trim-to length: 1.380"; primers: CCI 450; primer size: Small Rifle, Magnum; Lyman shell holder: No. 11; cast bullets used sized to .451" dia.; firearm used: Thompson/Center Encore; barrel length: 12"; twist: 1-16"; groove dia.: .451" |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 300 | Hornady XTP MAG | 34.0 | 1,608 | |
![]() | 300 | Hornady XTP MAG | 36.0 | 1,627 | |
firearm: Smith & Wesson .460 XVR; SAAMI maximum average pressure: 65,000 psi; barrel length: 7 1/2-inches; case: Starline; primer: CCI #200; trim to case length: 1.790"; temperature: 15 degrees | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 200 | Hornady FTX | 38.1 | 1900 | |
![]() | 200 | Hornady FTX | 41.1 | 2000 | |
![]() | 200 | Hornady FTX | 44.2 | 2100 | maximum load |
Hornady FTX Data rifle: S&W 460 XVR; barrel: Factory; length: 8 3/8"; twist: Gain twist 1 in 20"; primer: WLR; case: Hornady; C.O.L.: 2.275"; approach maximum loads with extreme caution | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 240 | Hornady Jacketed Mag-XTP HP | 39.5 | 2070 | sugg. start load; 2.160" OAL; 46,800 psi |
![]() | 240 | Hornady Jacketed Mag-XTP HP | 44.0 | 2231 | max load; compressed powder charge; 2.160" OAL; 57,100 psi |
![]() | 250 | Barnes XPB | 32.8 | 1902 | sugg. start load; 2.200" OAL; 45,600 psi |
![]() | 250 | Barnes XPB | 36.5 | 2033 | max load; compressed powder charge; 2.200" OAL; 56,400 psi |
![]() | 260 | Nosler Partition - Jacketed HG HP | 32.5 | 1853 | sugg. start load; 2.175" OAL; 43,200 psi |
![]() | 260 | Nosler Partition - Jacketed HG HP | 36.0 | 1993 | max load; 2.175" OAL; 54,900 psi |
![]() | 275 | Barnes XPB | 31.7 | 1820 | sugg. start load; 2.300" OAL; 46,100 psi |
![]() | 275 | Barnes XPB | 35.3 | 1944 | max load; 2.300" OAL; 57,400 psi; potentially most accurate load |
![]() | 300 | Speer Gold Dot Jacketed HP | 31.5 | 1752 | sugg. start load; 2.160" OAL; 45,100 psi |
![]() | 300 | Speer Gold Dot Jacketed HP | 35.0 | 1876 | max load; 2.160" OAL; 56,600 psi; potentially most accurate load |
![]() | 255 | Cast #452490 gas check | 27.0 | 1442 | sugg. start load; 2.180" OAL; 19,300 psi |
![]() | 255 | Cast #452490 gas check | 31.5 | 1841 | max load; 2.180" OAL; 37,400 psi |
![]() | 325 | Cast #452651 gas check | 26.0 | 1517 | sugg. start load; 2.180" OAL; 31,300 cup |
![]() | 325 | Cast #452651 gas check | 33.5 | 1794 | max load; 2.180" OAL; 53,700 cup |
Lyman Reloading Handbook 49th Edition cases: Starline; trim-to length: 1.790"; primers: Winchester WLRM; primer size: Large Rifle, Magnum; Lyman shell holder: No. 7; cast bullets used sized to .452" dia.; firearm used: Universal Receiver; barrel length: 10"; twist: 1-20"; groove dia.: .451" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 250 | Speer Colt GDHP or JHP | 29.0 | 1498 | start charge; reduced recoil load |
![]() | 250 | Speer Colt GDHP or JHP | 31.0 | 1551 | max charge; reduced recoil load |
![]() | 300 | Speer UCSP | 29.0 | 1394 | start charge; reduced recoil load |
![]() | 300 | Speer UCSP | 31.0 | 1458 | max charge; reduced recoil load |
![]() | 300 | Speer Casull GDHP | 34.0 | 1563 | start charge; full pressure load |
![]() | 300 | Speer Casull GDHP | 36.0 | 1625 | max charge; full pressure load |
Speer Handgun Data Reloading Manual #14 max. case length: 1.800"; trim-to length: 1.790"; max cart. OAL: 2.290"; RCBS shell holder: #14; cart. case: Hornady; primer: Federal 210; test firearm Smith & Wesson X-Frame; barrel length: 8.375"; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 200 | Hornady FTX (460 S&W) | 38.1 | 1834 | |
![]() | 200 | Hornady FTX (460 S&W) | 41.1 | 1949 | |
![]() | 200 | Hornady FTX (460 S&W) | 44.2 | 2063 | maximum load |
![]() | 240 | Hornady XTP Mag | 30.6 | 1513 | |
![]() | 240 | Hornady XTP Mag | 35.8 | 1638 | |
![]() | 240 | Hornady XTP Mag | 41.0 | 1762 | maximum load |
![]() | 300 | Hornady XTP Mag | 28.3 | 1313 | |
![]() | 300 | Hornady XTP Mag | 31.9 | 1391 | |
![]() | 300 | Hornady XTP Mag | 33.7 | 1469 | |
![]() | 300 | Hornady XTP Mag | 35.5 | 1548 | maximum load |
Using Hornady Bullets Gun: Smith & Wesson Model 460 XVR; barrel length: 8 3/8 inches; case: Starline; primer: Winchester Large Rifle; bullet diameter: .452"; bullets: 200 GR Hornady FTX (460 S&W) COAL: 2.275", 240 GR Hornady XTP Mag COAL: 2.160", 300 GR Hornady XTP Mag COAL: 2.165"; maximum COAL: 2.275"; maximum case length: 1.800"; trim to length: 1.790". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 240 | Hornady Mag Jacketed XTP/HP | 39.5 | 2194 | sugg. start load; 2.160" OAL |
![]() | 240 | Hornady Mag Jacketed XTP/HP | 44.0 | 2343 | max load; compressed powder charge; 2.160" OAL |
![]() | 250 | Barnes XPB | 32.8 | 1965 | sugg. start load; 2.200" OAL |
![]() | 250 | Barnes XPB | 36.5 | 2060 | max load; compressed powder charge; 2.200" OAL |
![]() | 260 | Nosler Partition Jacketed HG HP | 32.5 | 1914 | sugg. start load; 2.175" OAL |
![]() | 260 | Nosler Partition Jacketed HG HP | 36.0 | 2031 | max load; 2.175" OAL; potentially most accurate load |
![]() | 275 | Barnes XPB | 31.7 | 1840 | sugg. start load; 2.300" OAL |
![]() | 275 | Barnes XPB | 35.3 | 1987 | max load; 2.300" OAL; potentially most accurate load |
![]() | 300 | Speer Gold Dot Jacketed HP | 31.5 | 1811 | sugg. start load; 2.160" OAL |
![]() | 300 | Speer Gold Dot Jacketed HP | 35.0 | 1913 | max load; 2.160" OAL |
![]() | 255 | Cast #452490 gas check | 27.0 | 1791 | sugg. start load; 2.180" OAL |
![]() | 255 | Cast #452490 gas check | 31.5 | 1935 | max load; 2.180" OAL |
![]() | 325 | Cast #452651 gas check | 26.0 | 1627 | sugg. start load; 2.180" OAL |
![]() | 325 | Cast #452651 gas check | 33.5 | 1875 | max load; 2.180" OAL |
in a T/C Contender & Encore Lyman Reloading Manual 49th Edition This data was developed for use in the T/C Contender and Encore handguns. It can also be used in other single shot or bolt-action handguns such as the Remington XP-100 and Savage Striker. Do not use these loads in any other type of handgun. Cases: Starline; trim-to length: 1.790"; primers: Winchester WLRM; primer size: Large Rifle, Magnum; Lyman shell holder: No. 7; cast bullets used sized to .452" dia.; firearm used: Thompson/Center Encore; barrel length: 15"; twist: 1-20"; groove dia.: .451" |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 400 | Speer Gold Dot | 23.5 | 1,301 | 1.57 inches |
![]() | 400 | Hornady XTP | 23.5 | 1,356 | 1.62 inches |
Freedom Arms Loads were tested at 25 yards in a Freedom Arms Model 757 with a 6-inch barrel. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 275 | Barnes XPB HP | 26.1 | 1547 | sugg. start load; 1.810" OAL; 38,200 psi |
![]() | 275 | Barnes XPB HP | 29.0 | 1649 | max load; compressed powder charge; 1.810" OAL; 48,100 psi |
![]() | 325 | Hornady Jacketed XTP/HP | 25.2 | 1437 | sugg. start load; 36,400 psi |
![]() | 325 | Hornady Jacketed XTP/HP | 28.0 | 1547 | max load; 48,200 psi |
![]() | 400 | Hornady Jacketed XTP/HP | 19.8 | 1186 | sugg. start load; 37,900 psi |
![]() | 400 | Hornady Jacketed XTP/HP | 22.0 | 1272 | max load; 49,400 psi |
Lyman Reloading Handbook 49th Edition cases: Hornady; trim-to length: 1.395"; primers: CCI 350; primer size: Large Pistol, Magnum; Lyman shell holder: No. 17; 1.740" OAL (except where otherwise specified in remarks); firearm used: Universal Receiver; barrel length: 7 1/2"; twist: 1-18"; groove dia.: .475" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 325 | Speer GDSP | 25.5 | 1308 | start charge |
![]() | 325 | Speer GDSP | 27.5 | 1412 | max charge |
![]() | 400 | Speer GDSP | 21.0 | 1200 | start charge |
![]() | 400 | Speer GDSP | 23.0 | 1283 | max charge |
Speer Handgun Data Reloading Manual #14 max. case length: 1.400"; trim-to length: 1.390"; max cart. OAL: 1.765"; RCBS shell holder: #40; cart. case: Buffalo Bore; primer: CCI 300 (except where otherwise specified in remarks); test firearm: Freedom Arms M767; barrel length: 6"; Important Safety Note: Older developed in cut-down 45-70 cases must not be used in new Buffalo Bore or Hornady cases, as high pressures will result; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 400 | Hornady XTP Mag | 19.5 | 1051 | |
![]() | 400 | Hornady XTP Mag | 20.3 | 1090 | |
![]() | 400 | Hornady XTP Mag | 21.0 | 1137 | |
![]() | 400 | Hornady XTP Mag | 21.8 | 1183 | |
![]() | 400 | Hornady XTP Mag | 22.5 | 1226 | maximum load |
Using Hornady Bullets Gun: Freedom Arms Model 757; barrel length: 6 inches; case: BBA/Starline; primer: Winchester Large Pistol; bullet diameter: .475"; COAL: 1.740"; maximum COAL: 1.765"; maximum case length: 1.400"; trim to length: 1.390". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 400 | Speer Gold Dot | 23.5 | 1,301 | |
![]() | 400 | Hornady XTP-Mag | 23.5 | 1,356 | |
Load Data A Freedom Arms Model 757 with a 6-inch barrel was used to test fire all loads. Buffalo Bore/Starline cases used throughout. Large Pistol primers used for reduced loads; all others used Large Pistol Magnum. Maximum case length: 1.400 inches; trim-to length: 1.395 inches; overall cartridge length: 1.750 to 1.765 inches maximum. Bullet diameter: .476 inch for cast bullets, .475 inch for jacketed. Industry maximum average pressure: 50,000 psi. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 275 | Speer Jacketed HP | 25.6 | 1530 | sugg. start load; 1.650" OAL; 36,200 psi |
![]() | 275 | Speer Jacketed HP | 28.5 | 1665 | max load; compressed powder charge; 1.650" OAL; 45,400 psi |
![]() | 325 | Hornady Jacketed HP/XTP | 21.0 | 1321 | sugg. start load; 35,600 psi |
![]() | 325 | Hornady Jacketed HP/XTP | 23.7 | 1434 | max load; 47,200 psi |
![]() | 400 | Hornady Jacketed HP/XTP | 16.5 | 1072 | sugg. start load; 33,900 psi |
![]() | 400 | Hornady Jacketed HP/XTP | 18.3 | 1184 | max load; 45,600 psi |
Lyman Reloading Handbook 49th Edition cases: Hornady; trim-to length: 1.275"; primers: Winchester WLP; primer size: Large Pistol; Lyman shell holder: No. 17; 1.620" OAL (except where otherwise specified in remarks); firearm used: Universal Receiver; barrel length: 7 1/2"; twist: 1-18"; groove dia.: .475" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 275 | Speer Gold Dot HP | 25.5 | 1,461 | starting load |
![]() | 275 | Speer Gold Dot HP | 27.5 | 1,575 | MAXIMUM load |
![]() | 325 | Speer Gold Dot SP | 22.5 | 1,349 | starting load |
![]() | 325 | Speer Gold Dot SP | 24.5 | 1,457 | MAXIMUM load; compressed load |
![]() | 400 | Speer Gold Dot SP | 15.5 | 965 | starting load |
![]() | 400 | Speer Gold Dot SP | 17.5 | 1,115 | MAXIMUM load |
Speer Data Case: Hornady; primer: CCI 300/350; test firearm: Ruger Redhawk; barrel: 9 1/2"; COAL tested 1.650"; use MAXIMUM loads with caution | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 275 | Speer GDHP | 25.5 | 1461 | start charge |
![]() | 275 | Speer GDHP | 27.5 | 1575 | max charge |
![]() | 325 | Speer GDSP | 22.5 | 1349 | start charge |
![]() | 325 | Speer GDSP | 24.5 | 1457 | max charge; compressed load |
![]() | 400 | Speer GDSP | 15.5 | 965 | start charge |
![]() | 400 | Speer GDSP | 17.5 | 1115 | max charge |
Speer Handgun Data Reloading Manual #14 max. case length: 1.285"; trim-to length: 1.275"; max cart. OAL: 1.650"; RCBS shell holder: #40; cart. case: Hornady; primer: CCI 300 (except where otherwise noted in remarks); test firearm: Ruger Redhawk; barrel length: 9.5"; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 325 | Hornady XTP Mag | 17.0 | 718 | Do Not Reduce |
![]() | 325 | Hornady XTP Mag | 18.6 | 894 | |
![]() | 325 | Hornady XTP Mag | 20.3 | 1070 | |
![]() | 325 | Hornady XTP Mag | 21.9 | 1246 | maximum load |
![]() | 400 | Hornady XTP Mag | 15.3 | 858 | Do Not Reduce |
![]() | 400 | Hornady XTP Mag | 16.7 | 957 | |
![]() | 400 | Hornady XTP Mag | 17.3 | 1055 | maximum load |
Using Hornady Bullets Gun: Freedom Arms Model 757; barrel length: 6 inches; case: Hornady; primer: Winchester Large Pistol for Standard and Magnum loads; bullet diameter: .475"; 325 GR COAL: 1.620"; 400 GR COAL: 1.630"; maximum COAL: 1.650"; maximum case length: 1.285"; trim to length: 1.275". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 275 | Sierra Jacketed HP | 25.6 | 1531 | sugg. start load; 1.650" OAL |
![]() | 275 | Sierra Jacketed HP | 28.5 | 1721 | max load; 1.650" OAL |
![]() | 325 | Hornady Jacketed HP/XTP | 21.0 | 1338 | sugg. start load; potentially most accurate load |
![]() | 325 | Hornady Jacketed HP/XTP | 23.7 | 1493 | max load |
![]() | 400 | Hornady Jacketed HP/XTP | 16.5 | 1081 | sugg. start load |
![]() | 400 | Hornady Jacketed HP/XTP | 18.3 | 1198 | max load; potentially most accurate load |
in a T/C Contender & Encore Lyman Reloading Manual 49th Edition This data was developed for use in the T/C Contender and Encore handguns. It can also be used in other single shot or bolt-action handguns such as the Remington XP-100 and Savage Striker. Do not use these loads in any other type of handgun. Cases: Hornady; trim-to length: 1.275"; primers: Winchester WLP; primer size: Large Pistol; Lyman shell holder: No. 17; firearm used: Thompson/Center Encore; barrel length: 12"; twist: 1-18"; groove dia.: .475"; OAL: 1.620" (except where otherwise specified in remarks) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 325 | Hornady JHP/XTP | 24.5 | 1,372 | primer: CCI 300; most accurate 325-grain load |
![]() | 400 | Speer Gold Dot SP | 17.5 | 1,028 | primer: CCI 300 |
![]() | 410 | Cast Performance LBT | 18.0 | 1,131 | primer: CCI 300 |
in an FA Model 757 Test gun was a Freedom Arms Model 757 with a 6-inch barrel. Maximum pressure was 48,000 psi. Hornady cases used throughout. Temperature during testing was 85 degrees Fahrenheit. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 300 | Speer GDHP | 27.0 | 1305 | |
![]() | 300 | Speer GDHP | 27.5 | 1332 | |
![]() | 300 | Speer GDHP | 28.0 | 1365 | |
![]() | 300 | Speer GDHP | 28.5 | 1398 | |
![]() | 300 | Speer GDHP | 29.0 | 1423 | maximum load |
Gun: Magnum Research BFR; barrel length: 8 1/8 inches; case: IMI; primer: Winchester Large Pistol; bullet diameter: 500"/.501"; 300 GR Speer GDHP COAL: 1.580", 325 GR UCHP COAL: 1.575"; 325 Hunters Supply Cast FP COAL: 1.625" (1.580" for Auto Loading Pistols); maximum COAL: 1.575"; maximum case length: 1.285"; trim to length: 1.280". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 300 | Hornady XTP-MAG | 24.6 | 1193 | |
![]() | 300 | Hornady XTP-MAG | 26.3 | 1331 | |
![]() | 300 | Hornady XTP-MAG | 28.0 | 1469 | maximum load |
Using Hornady Bullets Gun: Magnum Research BFR; barrel length: 8 1/8 inches; case: IMI; primer: Winchester Large Pistol; bullet diameter: 500"/.501"; 300 gr Hornady XTP-MAG COAL: 1.580"; maximum COAL: 1.575"; maximum case length: 1.285"; trim to length: 1.280". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 300 | Jacketed | 25.3 | 1337 | tart load |
![]() | 300 | Jacketed | 28.6 | 1499 | never exceed; compressed charge |
![]() | 325 | Jacketed | 24.1 | 1270 | start load |
![]() | 325 | Jacketed | 27.0 | 1460 | never exceed |
Lee Precision Data CAUTION: With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. Large Pistol primer. Min. OAL: 1.575 | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 300 | Speer TMJ FN or GDHP | 28.0 | 1418 | start charge |
![]() | 300 | Speer TMJ FN or GDHP | 29.0 | 1501 | maximum charge |
![]() | 325 | Speer UCHP | 25.0 | 1229 | start charge |
![]() | 325 | Speer UCHP | 27.0 | 1376 | maximum charge |
![]() | 300 | Speer TMJ FN or GDHP | 28.0 | 1445 | start charge; revolver Freedom Arms M555 7.5" |
![]() | 300 | Speer TMJ FN or GDHP | 29.0 | 1509 | maximum charge; revolver Freedom Arms M555 7.5" |
![]() | 325 | Speer UCHP | 25.0 | 1283 | start charge; revolver Freedom Arms M555 7.5" |
![]() | 325 | Speer UCHP | 27.0 | 1444 | maximum charge; revolver Freedom Arms M555 7.5" |
![]() | 340 | Speer SWC | 23.0 | 1311 | start charge; revolver Freedom Arms M555 7.5" |
![]() | 340 | Speer SWC | 25.0 | 1446 | maximum charge; revolver Freedom Arms M555 7.5" |
Speer Reloading Manual #14 max. case length: 1.286"; trim-to length: 1.276"; max cart. OAL: 1.595"; RCBS shell holder: #33; cart. case: Speer; the 340 grain SWC bullets were cast in RCBS moulds; NOTE: primer, test firearm and barrel length are as follows except where otherwise noted in remarks - primer: CCI 300; test firearm: Magnum Research Desert Eagle; barrel length: 6"; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 300 | IMI JHP | 25.3 | 1299 | starting load |
![]() | 300 | IMI JHP | 28.7 | 1496 | maximum load |
![]() | 325 | Speer UCHP | 24.1 | 1266 | starting load |
![]() | 325 | Speer UCHP | 27.0 | 1434 | maximum load |
Vihtavuori Reloading Guide 6 test barrel: 6", 1 in 19" twist; primers: Large Pistol; cases: Speer, trim-to length: 1.280"; COL (in.): 1.575; loads less than minimum charges shown are not recommended; USE MAXIMUM LOADS WITH CAUTION! |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 350 | Sierra JHP | 29.1 | 1408 | COAL: 2.050 inches |
![]() | 350 | Sierra JHP | 30.9 | 1446 | COAL: 2.050 inches |
![]() | 350 | Sierra JHP | 32.7 | 1492 | COAL: 2.050 inches |
![]() | 350 | Sierra JHP | 34.5 | 1538 | COAL: 2.050 inches |
![]() | 350 | Sierra JHP | 36.3 | 1575 | Maximum Load; COAL: 2.050 inches |
![]() | 400 | Sierra JSP | 30.9 | 1397 | COAL: 2.062 inches |
![]() | 400 | Sierra JSP | 33.4 | 1444 | Maximum Load; COAL: 2.062 inches |
Using Sierra bullets Gun: Smith & Wesson Model 500; Barrel Length: 8 3/8 inches; Case: Starline "R"; Primer: Winchester Large Rifle; Bullet Diameter: .500 inches; Maximum COAL: 2.250 inches; Maximum Case Length: 1.620 inches; Trim to Length: 1.615 inches. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 275 | Barnes XPB HP | 35.5 | 1919 | sugg. start load |
![]() | 275 | Barnes XPB HP | 39.5 | 2111 | max load; potentially most accurate load |
![]() | 325 | Barnes XPB HP | 33.7 | 1742 | sugg. start load |
![]() | 325 | Barnes XPB HP | 37.5 | 1922 | max load |
![]() | 350 | Hornady Jacketed HP/XTP | 32.6 | 1673 | sugg. start load |
![]() | 350 | Hornady Jacketed HP/XTP | 36.3 | 1869 | max load; potentially most accurate load |
![]() | 375 | Barnes XPB HP | 29.7 | 1580 | sugg. start load |
![]() | 375 | Barnes XPB HP | 33.0 | 1707 | max load |
![]() | 400 | Sierra Jacketed FP | 30.7 | 1538 | sugg. start load |
![]() | 400 | Sierra Jacketed FP | 34.2 | 1672 | max load |
![]() | 500 | Hornady Jacketed FP | 26.0 | 1347 | sugg. start load |
![]() | 500 | Hornady Jacketed FP | 29.0 | 1454 | max load |
![]() | 375 | Cast #501680 | 29.7 | 1571 | sugg. start load |
![]() | 375 | Cast #501680 | 33.0 | 1735 | max load; potentially most accurate load |
Lyman Reloading Handbook 49th Edition Starline brass designed for large rifle primers was used to develop this data. Do not use cases designed for large pistol primers with this data. Starline brass designed for large rifle primers has "R" after "Mag" on the headstamp to designate a large rifle pocket. A heavy roll crimp should be used to allow for complete ignition of the slow burning powders used. Cases: Starline; trim-to length: 1.615"; primers: CCI 200; primer size: Large Rifle; Lyman shell holder: No. 17; firearm used: Thompson/Center Encore; barrel length: 15"; twist: 1-18"; groove dia.: .501" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 275 | Barnes XPB HP | 35.5 | 1919 | sugg. start load; 2.085" OAL |
![]() | 275 | Barnes XPB HP | 39.5 | 2111 | max load; 2.085" OAL; potentially most accurate load |
![]() | 325 | Barnes XPB HP | 33.7 | 1742 | sugg. start load; 2.290" OAL |
![]() | 325 | Barnes XPB HP | 37.5 | 1922 | max load; 2.290" OAL |
![]() | 350 | Hornady Jacketed HP/XTP | 32.6 | 1673 | sugg. start load; 1.985" OAL |
![]() | 350 | Hornady Jacketed HP/XTP | 36.3 | 1869 | max load; 1.985" OAL; potentially most accurate load |
![]() | 375 | Barnes XPB HP | 29.7 | 1580 | sugg. start load; 2.080" OAL |
![]() | 375 | Barnes XPB HP | 33.0 | 1707 | max load; 2.080" OAL |
![]() | 400 | Sierra Jacketed FP | 30.7 | 1538 | sugg. start load; 2.050" OAL |
![]() | 400 | Sierra Jacketed FP | 34.2 | 1672 | max load; 2.050" OAL |
![]() | 500 | Hornady Jacketed FP | 26.0 | 1347 | sugg. start load; 2.065" OAL |
![]() | 500 | Hornady Jacketed FP | 29.0 | 1454 | max load; 2.065" OAL |
![]() | 375 | Cast #501680 | 29.7 | 1571 | sugg. start load; 2.035" OAL |
![]() | 375 | Cast #501680 | 33.0 | 1735 | max load; 2.035" OAL; potentially most accurate load |
in a T/C Contender & Encore Lyman Reloading Manual 49th Edition This data was developed for use in the T/C Contender and Encore handguns. It can also be used in other single shot or bolt-action handguns such as the Remington XP-100 and Savage Striker. Do not use these loads in any other type of handgun. Cases: Starline; trim-to length: 1.615"; primers: CCI 200; primer size: Large Rifle; Lyman shell holder: No. 17; firearm used: Thompson/Center Encore; barrel length: 15"; twist: 1-18"; groove dia.: .501" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 440 | Cast Performance WFN GC | 30.0 | 1,433 | low extreme spread; accurate |
Starline cases and Winchester Large Rifle primers used throughout. Temperature during testing was 80 degrees Fahrenheit. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 350 | Hornady XTP-MAG | 28.8 | 1,400 | primer: WLPM or WLR; C.O.L.: 2.000" |
![]() | 350 | Hornady XTP-MAG | 32.0 | 1,500 | primer: WLPM or WLR; C.O.L.: 2.000" |
![]() | 350 | Hornady XTP-MAG | 35.3 | 1,600 | primer: WLPM or WLR; C.O.L.: 2.000" |
![]() | 350 | Hornady XTP-MAG | 37.0 | 1,650 | maximum load; primer: WLPM or WLR; C.O.L.: 2.000" |
Hornady Data rifle: S&W Model 500; barrel length: 8 3/8"; case: Hornady; use maximum loads with extreme caution | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 275 | Barnes XPB HP | 35.5 | 1863 | sugg. start load; 2.085" OAL; 33,900 psi |
![]() | 275 | Barnes XPB HP | 39.5 | 2024 | max load; 2.085" OAL; 45,900 psi |
![]() | 325 | Barnes XPB HP | 33.7 | 1738 | sugg. start load; 2.290" OAL; 35,300 psi |
![]() | 325 | Barnes XPB HP | 37.5 | 1866 | max load; 2.290" OAL; 47,200 psi; potentially most accurate load |
![]() | 350 | Hornady Jacketed HP/XTP | 32.6 | 1656 | sugg. start load; 1.985" OAL; 35,800 psi |
![]() | 350 | Hornady Jacketed HP/XTP | 36.3 | 1779 | max load; 1.985" OAL; 46,400 psi; potentially most accurate load |
![]() | 375 | Barnes XPB HP | 29.7 | 1561 | sugg. start load; 2.280" OAL; 35,500 psi |
![]() | 375 | Barnes XPB HP | 33.0 | 1670 | max load; 2.280" OAL; 45,200 psi; potentially most accurate load |
![]() | 400 | Sierra Jacketed FP | 30.7 | 1526 | sugg. start load; 2.050" OAL; 35,900 psi |
![]() | 400 | Sierra Jacketed FP | 34.2 | 1640 | max load; 2.050" OAL; 46,000 psi; potentially most accurate load |
![]() | 500 | Hornady Jacketed FP/XTP | 26.0 | 1308 | sugg. start load; 2.065" OAL; 40,100 psi |
![]() | 500 | Hornady Jacketed FP/XTP | 29.0 | 1398 | max load; 2.065" OAL; 49,500 psi |
![]() | 375 | Cast #501680 | 29.7 | 1487 | sugg. start load; 2.035" OAL; 25,200 psi; potentially most accurate load |
![]() | 375 | Cast #501680 | 33.0 | 1635 | max load; 2.035" OAL; 33,800 psi |
Lyman Reloading Handbook 49th Edition cases: Starline; trim-to length: 1.615"; primers: CCI #200; primer size: Large Rifle; Lyman shell holder: No. 17; cast bullets used sized to .501" dia.; firearm used: Universal Receiver; barrel length: 10"; twist: 1-18"; groove dia.: .500" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 300 | Hornady FTX | 37.8 | 1700 | |
![]() | 300 | Hornady FTX | 40.8 | 1800 | |
![]() | 300 | Hornady FTX | 43.7 | 1900 | maximum load |
FTX Data rifle: S&W Model 500; barrel: Factory; length: 8 3/8"; primer: WLR; case: Hornady; C.O.L.: 2.195"; approach maximum loads with extreme caution | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 350 | S&W UCSP | 36.0 | 1534 | start charge |
![]() | 350 | S&W UCSP | 40.0 | 1649 | max charge |
Speer Handgun Data Reloading Manual #14 max. case length: 1.625"; trim-to length: 1.615"; max cart. OAL: 2.250"; RCBS shell holder: #44; cart. case: Starline; primer: Federal 215 (Magnum); test firearm: Smith & Wesson X-Frame; barrel length: 8.875"; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 300 | Hornady FTX | 37.8 | 1676 | |
![]() | 300 | Hornady FTX | 40.8 | 1806 | |
![]() | 300 | Hornady FTX | 42.0 | 1851 | maximum load |
![]() | 350 | Hornady XTP Mag | 28.8 | 1272 | |
![]() | 350 | Hornady XTP Mag | 32.0 | 1380 | |
![]() | 350 | Hornady XTP Mag | 35.3 | 1488 | |
![]() | 350 | Hornady XTP Mag | 37.0 | 1596 | maximum load |
Using Hornady Bullets & Winchester Large Pistol Primer Gun: Smith & Wesson Model 500; barrel length: 8 3/8 inches; case: Starline; primer: Winchester Large Pistol for standard or magnum; bullet diameter: .500"; 300 GR FTX COAL: 2.195"; 350 GR XTP Mag COAL: 2.000"; 500 GR FP-XTP COAL: 2.080"; maximum COAL: 2.250"; maximum case length: 1.620"; trim to length: 1.615". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 300 | Hornady FTX | 37.8 | 1695 | |
![]() | 300 | Hornady FTX | 40.8 | 1800 | |
![]() | 300 | Hornady FTX | 42.0 | 1874 | maximum load |
![]() | 350 | Hornady XTP Mag | 28.8 | 1299 | |
![]() | 350 | Hornady XTP Mag | 32.0 | 1371 | |
![]() | 350 | Hornady XTP Mag | 35.3 | 1491 | |
![]() | 350 | Hornady XTP Mag | 37.0 | 1625 | maximum load |
Using Hornady Bullets & Winchester Large Rifle Primer Gun: Smith & Wesson Model 500; barrel length: 8 3/8 inches; case: Starline "R"; primer: Winchester Large Rifle; bullet diameter: .500"; 300 GR FTX COAL: 2.195"; 350 GR XTP Mag COAL: 2.000"; 500 FP-XTP COAL: 2.080"; maximum COAL: 2.250"; maximum case length: 1.620"; trim to length: 1.615". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 300 | Speer TMJ | 40.0 | 1870 | starting load; COL (in.): 2.008 |
![]() | 300 | Speer TMJ | 45.5 | 2139 | maximum load; COL (in.): 2.008 |
![]() | 350 | Hornady HP/XTP | 33.8 | 1709 | starting load; COL (in.): 1.984 |
![]() | 350 | Hornady HP/XTP | 38.7 | 1883 | maximum load; COL (in.): 1.984 |
![]() | 400 | Sierra JSP | 32.6 | 1591 | starting load; COL (in.): 2.051 |
![]() | 400 | Sierra JSP | 37.3 | 1759 | maximum load; COL (in.): 2.051 |
Vihtavuori Reloading Guide 6 test barrel: 11", 1 in 18" twist; primers: Large Rifle; cases: Starline, trim-to length: 1.614"; loads less than minimum charges shown are not recommended; USE MAXIMUM LOADS WITH CAUTION! |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 90 | Hornady HP-XTP | 9.6 | 1048 | |
![]() | 90 | Hornady HP-XTP | 10.1 | 1149 | |
![]() | 90 | Hornady HP-XTP | 10.7 | 1267 | |
![]() | 90 | Hornady HP-XTP | 11.2 | 1384 | |
![]() | 90 | Hornady HP-XTP | 11.8 | 1495 | maximum load |
Using Hornady Bullets Gun: CZ Model 52; barrel length: 4 3/4 inches; case: Starline; primer: Winchester Small Pistol; bullet diameter: .308" and .309" (.309" used throughout test); COAL: 1.320"; maximum COAL: 1.385"; maximum case length: .984"; trim to length: .974". NOTES FROM THE LAB - The 7.62mm Tokarev (aka 7.62x25mm Russian Tokarev) was adopted as the official Soviet military pistol cartridge around 1930 in the Models TT-30 and TT-33 auto-loading pistols. Surplus guns (made in several different countries) eventually began finding their way to the US in the late 1980's. Quality varied significantly; however, both guns and ammunition were inexpensive and many are currently in circulation. The test pistol used here was a CZ Model 52, one of the better quality guns offered in the chambering. Most surplus ammunition is Berdan primed and is usually corrosive. Barrel groove diameter has a rather large variance, with many pistols utilizing .311 to .312 inch bullets. To develop handload data Starline cases were used (available direct at 800-280-6660). These are intended to house .308-inch bullets and will require neck reaming if .311- to .312-inch bullets are used. The Hornady 90-grain HP-XTP currently has a .309-inch diameter, which seated correctly and functioned properly in the CZ 52. Bullets had a tendency to tilt during seating; however, with care they could be straight in the rather short case neck. A crimp was applied as a separate step using a Lee Factory Crimp Die. Some "start" loads did not produce enough pressure to reliably operate the action on the test pistol, but all maximum loads functioned flawlessly. |