Super Magnum
Slow burning handgun powder filling the gap between N350 and N110. Especially developed for handgun cartridges with heavy bullets and/or large case volume. Reloading data is currently available for the following cartridges: 9x21 mm, .38 Super Auto, .357 Magnum, 357 Remington Maximum, .40 S&W, 10 mm AUTO, .41 Remington Magnum, .44 Remington Magnum, .45 Colt, .45 Winchester Magnum and .454 Casull.
Shape | Color | Perforation | Diameter min | Diameter max | Length/thick. min | Length/thick. max | Manufacturer |
---|---|---|---|---|---|---|---|
Cylinder(tubular) | Gray | Yes | 0.74 mm | 0.77 mm | 1.02 mm | 2.12 mm | Finland |
Ladedata som finnes på hjemmesidene til Evje PK er KUN ment som en veiledning! Ladedata skal alltid verifiseres mot kjente kilder (kruttprodusenter, ladebøker o.l.)
Data funnet på våre hjemmesider brukes på eget ansvar, og Evje Pistolklubb fratar seg alt ansvar for feil bruk av, eller skrivefeil i oppgitte data.
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 158 | XTP | 10.9 | 1320 | start load; min OAL: 1.575 |
![]() | 158 | XTP | 11.9 | 1417 | never exceed; min OAL: 1.575 |
![]() | 180 | Jacketed | 8.9 | 1154 | start load; min OAL: 1.677 |
![]() | 180 | Jacketed | 10.3 | 1261 | never exceed; min OAL: 1.677 |
![]() | 200 | Jacketed | 8.4 | 1020 | start load; min OAL: 1.697 |
![]() | 200 | Jacketed | 9.4 | 1123 | never exceed; min OAL: 1.697 |
Lee Precision Data Small Pistol Primer. With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 140 | Cutting Edge Raptor HP | 9.5 | 1020 | |
![]() | 140 | Cutting Edge Raptor HP | 10.0 | 1091 | |
![]() | 140 | Cutting Edge Raptor HP | 10.5 | 1195 | |
![]() | 140 | Cutting Edge Raptor HP | 11.0 | 1275 | |
![]() | 140 | Cutting Edge Raptor HP | 11.5 | 1330 | |
![]() | 140 | Cutting Edge Raptor HP | 12.0 | 1401 | |
Using Cutting Edge bullets Warning! A Ruger GP 100 with a 6-inch barrel was used to test-fire the loads. Starline cases and CCI 500 primers were used throughout, except where noted. Bullet diameter: .357 inch; maximum case length: 1.290 inches; trim-to length: 1.280 inches. Overall loaded length: 1.570 inches. Source: Handloader Magazine issue #298. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 158 | Hornady FP/XTP | 11.8 | 1401 | starting load; OAL (in.): 1.575 |
![]() | 158 | Hornady FP/XTP | 12.6 | 1490 | maximum load; OAL (in.): 1.575 |
![]() | 180 | Speer TMJ | 10.1 | 1243 | starting load; OAL (in.): 1.677; (the cartridge overall length exceeds the CIP maximum) |
![]() | 180 | Speer TMJ | 11.3 | 1342 | maximum load; OAL (in.): 1.677;(the cartridge overall length exceeds the CIP maximum) |
![]() | 200 | Speer TMJ | 9.2 | 1106 | starting load; OAL (in.): 1.697; (the cartridge overall length exceeds the CIP maximum) |
![]() | 200 | Speer TMJ | 10.2 | 1199 | maximum load; OAL (in.): 1.697; (the cartridge overall length exceeds the CIP maximum) |
Vihtavuori Reloading Guide 2006 test barrel: 7", 1 in 18 1/2" twist; primers: Small Rifles; cases: Remington, trim-to length: 1.283"; loads less than minimum charges shown are not recommended; USE MAXIMUM LOADS WITH CAUTION! | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 140 | Hornady FTX | 9.3 | 1100 | |
![]() | 140 | Hornady FTX | 9.6 | 1150 | |
![]() | 140 | Hornady FTX | 9.8 | 1200 | |
![]() | 140 | Hornady FTX | 10.1 | 1250 | |
![]() | 140 | Hornady FTX | 10.3 | 1300 | maximum load |
Handgun (FTX Data) max. case length: 1.250"; case trim length: 1.240"; bullet diameter: .357"; Pistol: Ruger GP100; barrel: 4", 1 in 16" twist; case: Remington; primer: WSP; bullet: 140 GR FTX; maximum COL: 1.585"; sectional density: .157; ballistic coefficient: .160; use maximum loads with caution; NOTE: DUE TO THE LONGER OGIVE IT IS CRITICAL THAT CARTRIDGE CASES BE TRIMMED TO THE LENGTH SPECIFIED. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 110 | Hornady HP-XTP | 10.7 | 1150 | COAL: 1.590" |
![]() | 110 | Hornady HP-XTP | 11.0 | 1197 | COAL: 1.590" |
![]() | 110 | Hornady HP-XTP | 11.4 | 1242 | COAL: 1.590" |
![]() | 110 | Hornady HP-XTP | 11.7 | 1290 | COAL: 1.590" |
![]() | 110 | Hornady HP-XTP | 12.0 | 1352 | COAL: 1.590" |
![]() | 110 | Hornady HP-XTP | 12.3 | 1399 | maximum load; COAL: 1.590" |
![]() | 125 | Hornady HP-XTP or FP-XTP | 10.0 | 1016 | COAL: 1.590" |
![]() | 125 | Hornady HP-XTP or FP-XTP | 10.2 | 1069 | COAL: 1.590" |
![]() | 125 | Hornady HP-XTP or FP-XTP | 10.5 | 1131 | COAL: 1.590" |
![]() | 125 | Hornady HP-XTP or FP-XTP | 10.7 | 1185 | maximum load; COAL: 1.590" |
![]() | 140 | Hornady FTX | 9.3 | 1267 | COAL: 1.585"; case trim to length: 1.240" |
![]() | 140 | Hornady FTX | 9.6 | 1270 | COAL: 1.585"; case trim to length: 1.240" |
![]() | 140 | Hornady FTX | 9.8 | 1298 | COAL: 1.585"; case trim to length: 1.240" |
![]() | 140 | Hornady FTX | 10.1 | 1320 | COAL: 1.585"; case trim to length: 1.240" |
![]() | 140 | Hornady FTX | 10.3 | 1330 | maximum load; COAL: 1.585"; case trim to length: 1.240" |
Handgun Using Hornady Bullets Gun: Ruger GP100; barrel length: 6"; case: Starline; primer: Winchester Small Pistol Magnum; bullet diameter: .357"; maximum COAL: 1.590"; maximum case length: 1.290"; trim to length: 1.280". |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 158 | Hornady FP/XTP | 13.1 | 1591 | starting load; COL (in.): 1.890 |
![]() | 158 | Hornady FP/XTP | 14.3 | 1683 | maximum load; COL (in.): 1.890 |
![]() | 158 | Rainier FP | 13.3 | 1608 | starting load; COL (in.): 1.890 |
![]() | 158 | Rainier FP | 14.5 | 1695 | maximum load; COL (in.): 1.890 |
![]() | 160 | Intercast LFN | 13.4 | 1696 | starting load; COL (in.): 1.890 |
![]() | 160 | Intercast LFN | 14.6 | 1775 | maximum load; COL (in.): 1.890 |
![]() | 180 | Nosler Silhouette | 12.2 | 1453 | starting load; COL (in.): 1.894 |
![]() | 180 | Nosler Silhouette | 13.1 | 1534 | maximum load; COL (in.): 1.894 |
Vihtavuori Reloading Guide 6 test barrel: 12", 1 in 18 1/2" twist; primers: Small Rifle; cases: Remington, trim-to length: 1.598"; loads less than minimum charges shown are not recommended; USE MAXIMUM LOADS WITH CAUTION! |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 90 | Sierra Jacketed HP | 12.1 | 1399 | sugg. start load; 26,300 psi; 1.140" OAL |
![]() | 90 | Sierra Jacketed HP | 13.5 | 1627 | max load; compressed powder charge; 36,900 psi; 1.140" OAL |
![]() | 115 | Sierra Jacketed HP | 10.8 | 1331 | sugg. start load; 31,100 psi; 1.140" OAL |
![]() | 115 | Sierra Jacketed HP | 12.0 | 1473 | max load; 39,300 psi; 1.140" OAL |
![]() | 125 | Speer Gold Dot Jacketed HP | 10.1 | 1214 | sugg. start load; 28,700 psi; 1.135" OAL |
![]() | 125 | Speer Gold Dot Jacketed HP | 11.3 | 1381 | max load; 38,400 psi; 1.135" OAL; potentially most accurate load |
![]() | 147 | Speer TMJ | 8.1 | 1092 | sugg. start load; 31,300 psi; 1.135" OAL |
![]() | 147 | Speer TMJ | 9.0 | 1185 | max load; 38,400 psi; 1.135" OAL |
Lyman Reloading Handbook 49th Edition cases: Federal; trim-to length: .860"; primers: Federal 100; primer size: Small Pistol; Lyman shell holder: No. 15; firearm used: Universal Receiver; barrel length: 4"; twist: 1-16"; groove dia.: .3553" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 125 | Speer GD-HP or TMJ RN | 10.1 | 1257 | start charge |
![]() | 125 | Speer GD-HP or TMJ RN | 11.2 | 1400 | maximum charge; compressed load |
![]() | 147 | Speer GD-HP or TMJ | 8.2 | 1100 | start charge |
![]() | 147 | Speer GD-HP or TMJ | 9.0 | 1207 | maximum charge |
Speer Reloading Manual #14 max case length: 0.865"; trim-to length: 0.860"; max cart length: 1.140"; RCBS shellholder: #27; barrel length: 4"; twist: 1-16"; test firearm: SIG 229; case: Speer; primers: CCI 500; COL: 1.135"; bullet dia.: 355"; maximum loads should be used with caution | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 124 | Speer Gold Dot hollowpoint | 10.1 | 1,257 | |
![]() | 124 | Speer Gold Dot hollowpoint | 11.2 | 1,400 | maximum and compressed load |
Speer Load Data CCI 500 primers and Speer cases used in all test loads. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 124 | Jacketed | 10.0 | 1407 | start load; min OAL: 1.260 |
![]() | 124 | Jacketed | 10.9 | 1594 | never exceed; min OAL: 1.260 |
![]() | 130 | Jacketed | 9.3 | 1319 | start load; min OAL: 1.260 |
![]() | 130 | Jacketed | 10.1 | 1457 | never exceed; min OAL: 1.260 |
![]() | 147 | Jacketed | 7.9 | 1209 | start load; min OAL: 1.260 |
![]() | 147 | Jacketed | 8.5 | 1293 | never exceed; min OAL: 1.260 |
![]() | 147 | XTP | 7.8 | 1181 | start load; min OAL: 1.260 |
![]() | 147 | XTP | 8.4 | 1293 | never exceed; min OAL: 1.260 |
Lee Precision Data Small Pistol Primer. DO NOT USE THESE LOADS IN 38 AUTOMATIC OR 38 ACP. CAUTION: With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 125 | Hornady | 8.2 | 1157 | |
![]() | 125 | Hornady | 8.4 | 1196 | |
![]() | 125 | Hornady | 8.6 | 1243 | |
![]() | 125 | Hornady | 8.7 | 1290 | |
![]() | 125 | Hornady | 8.9 | 1328 | maximum load |
Using 121/124/125 GR Hornady Bullets Gun: Kimber Model 1911; barrel length: 5 inches; case: Starline; primer: Winchester Small Pistol; bullet diameter: .355" and .357"; 121 GR Hornady HAP COAL: 1.210"; 124 GR FMJ-RN COAL: 1.250", 124 GR HP XTP COAL: 1.210"; 124 GR FMJ-FP COAL: 1.200"; 125 GR HAP COAL: 1.210"; 125 GR FP XTP & HP XTP COAL: 1.200"; maximum COAL: 1.280"; maximum case length: .900"; trim to length: .895". NOTE: 121 GR and 124 GR bullets can be used for all 125 GR data listed. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 140 | Hornady HP XTP | 6.1 | 799 | |
![]() | 140 | Hornady HP XTP | 6.4 | 871 | |
![]() | 140 | Hornady HP XTP | 6.6 | 945 | |
![]() | 140 | Hornady HP XTP | 6.9 | 1024 | |
![]() | 140 | Hornady HP XTP | 7.2 | 1106 | |
![]() | 140 | Hornady HP XTP | 7.5 | 1174 | maximum load |
Using 140 GR Hornady Bullets Gun: Kimber Model 1911; barrel length: 5 inches; case: Starline; primer: Winchester Small Pistol; bullet diameter: .355" and .357"; COAL: 1.210"; maximum COAL: 1.280"; maximum case length: .900"; trim to length: .895". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 147 | Hornady FMJ-RN-BT or HP XTP | 7.0 | 996 | |
![]() | 147 | Hornady FMJ-RN-BT or HP XTP | 7.3 | 1034 | |
![]() | 147 | Hornady FMJ-RN-BT or HP XTP | 7.5 | 1080 | |
![]() | 147 | Hornady FMJ-RN-BT or HP XTP | 7.7 | 1126 | |
![]() | 147 | Hornady FMJ-RN-BT or HP XTP | 7.9 | 1162 | maximum load |
Using 147 GR Hornady Bullets Gun: Kimber Model 1911; barrel length: 5 inches; case: Starline; primer: Winchester Small Pistol; bullet diameter: .355" and .357"; COAL: 1.260"; maximum COAL: 1.280"; maximum case length: .900"; trim to length: .895". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 124 | Hornady FMJ-FP | 9.9 | 1407 | starting load; COL (in.): 1.260 |
![]() | 124 | Hornady FMJ-FP | 10.4 | 1501 | maximum load; COL (in.): 1.260 |
![]() | 130 | Sierra FMJ | 9.3 | 1319 | starting load; COL (in.): 1.260 |
![]() | 130 | Sierra FMJ | 9.6 | 1388 | maximum load; COL (in.): 1.260 |
![]() | 147 | Hornady HP/XTP | 7.9 | 1181 | starting load; COL (in.): 1.260 |
![]() | 147 | Hornady HP/XTP | 8.2 | 1237 | maximum load; COL (in.): 1.260 |
Vihtavuori Reloading Guide 6 test barrel: 5 1/2", 1 in 16" twist; primers: Small Pistol; cases: Remington +P, trim-to length: 0.893"; loads less than minimum charges shown are not recommended; USE MAXIMUM LOADS WITH CAUTION! | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 124 | Hornady FMJ/FP | 8.2 | 983 | sugg. start load; 20,100 cup; 1.165" OAL |
![]() | 124 | Hornady FMJ/FP | 9.2 | 1303 | max load; compressed powder charge; 31,000 cup; 1.165" OAL |
![]() | 147 | Speer TMJ | 7.8 | 896 | sugg. start load; 21,600 cup; 1.280" OAL |
![]() | 147 | Speer TMJ | 8.7 | 1144 | max load; 29,600 cup; 1.280" OAL |
Handgun Data Lyman Reloading Handbook 49th Edition cases: Remington; trim-to length: .895"; primers: CCI 500; primer size: Small Pistol; Lyman shell holder: No. 12; firearm used: Universal Receiver; barrel length: 5"; twist: 1-16"; groove dia.: .355" |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 180 | Speer FN or CM | 11.9 | 1398 | start charge |
![]() | 180 | Speer FN or CM | 12.5 | 1514 | maximum charge |
Speer Reloading Manual #14 max. case length: 1.305"; trim-to length: 1.295"; max cart. OAL: 1.592"; RCBS shell holder: #35; cart. case: Winchester; primer: CCI 300; test firearm: Universal Receiver; barrel length: HS Precision 24"; bullets were cast in RCBS moulds; maximum loads should be used with CAUTION |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 200 | Jacketed | 7.5 | 1069 | start load; min. OAL: 1.126 |
![]() | 200 | Jacketed | 8.0 | 1132 | NEVER EXCEED; compressed load; min. OAL: 1.126 |
Lee Precision 200 GR Data Do not use reloads in Glock or similar guns with chambers that do not fully support the cartridge due to the intrusion of the feed ramp. CAUTION: With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. Small Pistol Primer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 200 | Speer TMJ | 7.6 | 1053 | starting load |
![]() | 200 | Speer TMJ | 7.7 | 1076 | maximum load |
Vihtavuori Reloading Guide 6 test barrel: 5 1/2", 1 in 16" twist; primers: Small Pistol; cases: Remington, trim-to length: 0.843"; COL (in.): 1.126; This data is intended for use in firearms with barrels which fully support the cartridge in the chamber. Use of this data in firearms which do not fully support the cartridge may result in bulged cases, ruptured cases, case head separation, or other conditions which may result in damage to the firearm and/or result in injury or death of the shooter and/or bystanders. Loads less than minimum charges shown are not recommended; USE MAXIMUM LOADS WITH CAUTION! |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 150-155 | JHP | 11.2 | 1,150 | starting load |
![]() | 150-155 | JHP | 12.0 | 1,250 | maximum load |
![]() | 165 | JHP | 10.5 | 1,125 | starting load |
![]() | 165 | JHP | 11.2 | 1,250 | maximum load |
Accuracy measurements are 10-shot groups fired from a Ransom Rest at 25 yards. Test firearm was a Les Baer Premier II pistol. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 170 | Jacketed | 15.3 | 1539 | start load; compressed; min OAL: 1.579 |
![]() | 170 | Jacketed | 17.5 | 1690 | never exceed; compressed; min OAL: 1.579 |
![]() | 210 | XTP | 13.0 | 1329 | start load; min OAL: 1.579 |
![]() | 210 | XTP | 15.1 | 1470 | never exceed; compressed; min OAL: 1.579 |
Lee Precision Data CAUTION: With NEVER EXCEED LOADS; maintain Minimum Over All Length or longer. (Modern Reloading, Second Edition - Richard Lee) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 170 | Sierra JHC | 15.3 | 1526 | starting load |
![]() | 170 | Sierra JHC | 16.9 | 1642 | maximum load |
![]() | 210 | Hornady HP/XTP | 13.0 | 1329 | starting load |
![]() | 210 | Hornady HP/XTP | 14.6 | 1435 | maximum load |
Vihtavuori Reloading Guide 6 test barrel: 6", 1 in 18 3/4" twist; primers: Large Pistol; cases: W-W Super, trim-to length: 1.280"; COL (in.): 1.579; loads less than minimum charges shown are not recommended; USE MAXIMUM LOADS WITH CAUTION! |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 240 | Cutting Edge Solid | 14.0 | 1114 | |
![]() | 240 | Cutting Edge Solid | 14.5 | 1155 | |
![]() | 240 | Cutting Edge Solid | 15.0 | 1231 | |
![]() | 240 | Cutting Edge Solid | 15.5 | 1278 | |
Using Cutting Edge bullets Warning! A Ruger New Model Blackhawk (stainless Bisley) with a 5 1/2-inch barrel was used to test-fire these loads. Starline cases were used throughout. CCI 300 primers were used in all loads, except where indicated. Bullet diameter: .430 inch; maximum case length: 1.285 inches; trim-to length: 1.275 inches. Overall loaded length: 1.610 inches. Source: Handloader Magazine issue #298. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 200 | XTP | 15.9 | 1456 | start load; min OAL: 1.602 |
![]() | 200 | XTP | 19.2 | 1630 | never exceed; compressed; min OAL: 1.602 |
![]() | 240 | Jacketed | 13.9 | 1286 | start load; min OAL: 1.602 |
![]() | 300 | Jacketed | 12.2 | 1091 | start load; min OAL: 1.717 |
![]() | 300 | Jacketed | 13.7 | 1200 | never exceed; min OAL: 1.717 |
![]() | 240 | Jacketed | 16.4 | 1424 | never exceed min OAL: 1.602 |
Lee Precision Data Large pistol primer. CAUTION: With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 180 | Hornady HP-XTP | 19.0 | 1634 | starting load; COL (in.): 1.602 |
![]() | 180 | Hornady HP-XTP | 21.6 | 1781 | maximum load; COL (in.): 1.602 |
![]() | 200 | Hornady HP-XTP | 16.8 | 1506 | starting load; COL (in.): 1.602 |
![]() | 200 | Hornady HP-XTP | 19.4 | 1642 | maximum load; COL (in.): 1.602 |
![]() | 220 | Sierra FPJ-Match | 16.7 | 1417 | starting load; COL (in.): 1.602 |
![]() | 220 | Sierra FPJ-Match | 18.8 | 1542 | maximum load; COL (in.): 1.602 |
![]() | 240 | Hornady JTC-SIL | 14.7 | 1325 | starting load; COL (in.): 1.602 |
![]() | 240 | Hornady JTC-SIL | 16.6 | 1434 | maximum load; COL (in.): 1.602 |
![]() | 250 | Sierra FPJ-Match | 13.4 | 1253 | starting load; COL (in.): 1.602 |
![]() | 250 | Sierra FPJ-Match | 16.7 | 1406 | maximum load; COL (in.): 1.602 |
![]() | 300 | Hornady HP-XTP | 13.1 | 1145 | starting load; COL (in.): 1.717; the cartridge overall length exceeds the CIP maximum |
![]() | 300 | Hornady HP-XTP | 14.6 | 1231 | maximum load; COL (in.): 1.717; the cartridge overall length exceeds the CIP maximum |
![]() | 300 | Sierra JSP | 12.7 | 1122 | starting load; COL (in.): 1.717; the cartridge overall length exceeds the CIP maximum |
![]() | 300 | Sierra JSP | 13.8 | 1208 | maximum load; COL (in.): 1.717; the cartridge overall length exceeds the CIP maximum |
Vihtavuori Reloading Guide 6 test barrel: 7", 1 in 20" twist; primers: Large Pistol; cases: Remington, trim-to length: 1.275"; loads less than minimum charges shown are not recommended; USE MAXIMUM LOADS WITH CAUTION! | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 220 | Sierra FPJ Match | 16.5 | 1195 | overall loaded length (inches): 1.595 |
![]() | 220 | Sierra FPJ Match | 17.5 | 1239 | overall loaded length (inches): 1.595 |
![]() | 220 | Sierra FPJ Match | 18.5 | 1294 | overall loaded length (inches): 1.595 |
![]() | 220 | Sierra FPJ Match | 19.5 | 1337 | overall loaded length (inches): 1.595 |
Handloading Data A Smith & Wesson Model 69 with a 4 1/4-inch barrel was used to test fire these loads. Starline cases were used throughout. Maximum case length: 1.285 inches; trim-to length: 1.275 inches; primer: CCI 300 (except where otherwise specified in remarks). | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 180 | Hornady HP-XTP | 13.6 | 850 | |
![]() | 180 | Hornady HP-XTP | 16.4 | 1152 | |
![]() | 180 | Hornady HP-XTP | 19.2 | 1454 | maximum load |
Revolver Using 180 GR Hornady Bullets Gun: Ruger New Model Blackhawk (Bisley); barrel length: 5 1/2-inches; case: Starline; primer: Winchester Large Pistol; bullet diameter: .430"; maximum COAL: 1.610"; maximum case length: 1.285"; trim to length: 1.275"; COAL: 1.600". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 200 | Hornady HP-XTP | 15.3 | 1229 | |
![]() | 200 | Hornady HP-XTP | 17.1 | 1317 | |
![]() | 200 | Hornady HP-XTP | 18.9 | 1405 | |
![]() | 200 | Hornady HP-XTP | 19.8 | 1494 | maximum load |
Revolver Using 200 GR Hornady Bullets Gun: Ruger New Model Blackhawk (Bisley); barrel length: 5 1/2-inches; case: Starline; primer: Winchester Large Pistol; bullet diameter: .430"; maximum COAL: 1.610"; maximum case length: 1.285"; trim to length: 1.275"; COAL: 1.600". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 240 | Hornady HP-XTP or CL-SIL | 13.7 | 918 | |
![]() | 240 | Hornady HP-XTP or CL-SIL | 15.5 | 1107 | |
![]() | 240 | Hornady HP-XTP or CL-SIL | 16.4 | 1297 | maximum load |
Revolver Using 240 GR Hornady Bullets Gun: Ruger New Model Blackhawk (Bisley); barrel length: 5 1/2-inches; case: Starline; primer: Winchester Large Pistol; bullet diameter: .430"; Hornady HP-XTP and CL-SIL COAL: 1.600"; SWC-HP and SWC COAL: 1.610"; maximum COAL: 1.610"; maximum case length: 1.285"; trim to length: 1.275". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 265 | Hornady FP | 12.8 | 1062 | |
![]() | 265 | Hornady FP | 14.5 | 1180 | maximum load |
Revolver Using 265 GR Hornady Bullets Gun: Ruger New Model Blackhawk (Bisley); barrel length: 5 1/2-inches; case: Starline; primer: Winchester Large Pistol; bullet diameter: .430"; maximum COAL: 1.610"; maximum case length: 1.285"; trim to length: 1.275"; COAL: 1.610". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 300 | Hornady HP-XTP | 11.7 | 976 | |
![]() | 300 | Hornady HP-XTP | 12.3 | 1035 | |
![]() | 300 | Hornady HP-XTP | 12.8 | 1093 | maximum load |
Revolver Using 300 GR Hornady Bullets Gun: Ruger New Model Blackhawk (Bisley); barrel length: 5 1/2-inches; case: Starline; primer: Winchester Large Pistol; bullet diameter: .430"; maximum COAL: 1.600"; maximum case length: 1.285"; trim to length: 1.275"; COAL: 1.610". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 200 | Hornady HP-XTP | 19.3 | 1675 | |
![]() | 200 | Hornady HP-XTP | 20.1 | 1702 | maximum load |
TC Using Hornady Bullets Gun: Thompson/Center G-2 Contender; barrel length: 10 inches; case: Starline; primer: Winchester Large Pistol; bullet diameter: .430"; 200, 240 & 300 GR Hornady HP-XTP and 240 GR CL-SIL COAL: 1.600"; 265 Hornady FP COAL: 1.610"; maximum COAL: 1.610"; maximum case length: 1.285"; trim to length: 1.275". |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 250 | Hornady HP/XTP | 14.1 | 971 | starting load |
![]() | 250 | Hornady HP/XTP | 15.0 | 1129 | maximum load |
Vihtavuori Reloading Guide 6 test barrel: 6", 1 in 16" twist; primers: Large Pistol; cases: Remington, trim-to length: 1.279"; COL (in.): 1.594 (except where otherwise specified in remarks); loads less than minimum charges shown are not recommended; USE MAXIMUM LOADS WITH CAUTION! | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 225 | Hornady FTX | 13.5 | 900 | maximum load; DO NOT REDUCE |
Handgun (FTX Data) max. case length: 1.230"; case trim length: 1.215"; bullet diameter: .452"; pistol: Ruger Blackhawk; barrel: 7 1/2" 1 in 16" twist; case: Starline; primer: WLP; bullet: 225 GR. FTX; maximum COL: 1.645"; sectional density: .157; ballistic coefficient: .140; use maximum loads with caution | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 225 | Hornady FTX | 13.5 | 834 | maximum load |
Revolver Using 225 GR Hornady Bullets Gun: Ruger New Model (Bisley) Blackhawk; barrel length: 5 1/2 inches; case: Starline; primer: Winchester WLP; bullet diameter: .452"; COAL: 1.645; maximum COAL: 1.600"; maximum case length: 1.285"; trim to length: 1.215"; | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 240 | Hornady XTP-MAG | 14.8 | 858 | |
![]() | 240 | Hornady XTP-MAG | 15.2 | 918 | |
![]() | 240 | Hornady XTP-MAG | 15.6 | 978 | |
![]() | 240 | Hornady XTP-MAG | 15.9 | 1039 | maximum load |
![]() | 250 | Hornady HP-XTP | 14.0 | 1141 | |
![]() | 250 | Hornady HP-XTP | 14.3 | 1150 | |
![]() | 250 | Hornady HP-XTP | 14.7 | 1160 | |
![]() | 250 | Hornady HP-XTP | 15.1 | 1143 | maximum load |
T/C & Ruger Using Hornady Bullets Gun: Thompson/Center Encore; barrel length: 12 inches; case: Starline; primer: Winchester WLP; bullet diameter: .452"; 240 and 300 GR Hornady XTP-MAG COAL: 1.655"; 250 HP-XTP COAL: 1.595"; 300 HP-XTP COAL: 1.580"; maximum COAL: 1.600"; maximum case length: 1.285"; trim to length: 1.275". |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 200 | Jacketed | 17.7 | 1626 | start load; min OAL: 1.555 |
![]() | 200 | Jacketed | 20.2 | 1824 | never exceed; min OAL: 1.555 |
Lee Precision Data Large Pistol primer; with NEVER EXCEED LOADS maintain Minimum Over All Length or longer (Modern Reloading - Second Edition - Richard Lee) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 185 | Hornady HP/XTP | 17.4 | 1714 | starting load; COL (in.): 1.516 |
![]() | 185 | Hornady HP/XTP | 20.5 | 1888 | maximum load; COL (in.): 1.516 |
![]() | 200 | Hornady FMJ-CT | 16.5 | 1583 | starting load; COL (in.): 1.555 |
![]() | 200 | Hornady FMJ-CT | 19.0 | 1744 | maximum load; COL (in.): 1.555 |
![]() | 250 | Hornady HP/XTP | 13.8 | 1289 | starting load; COL (in.): 1.504 |
![]() | 250 | Hornady HP/XTP | 15.8 | 1414 | maximum load; COL (in.): 1.504 |
Vihtavuori Reloading Guide 6 test barrel: 12", 1 in 16" twist; primers: Large Pistol; cases: Winchester, trim-to length: 1.192"; loads less than minimum charges shown are not recommended; USE MAXIMUM LOADS WITH CAUTION! |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 185 | XTP | 26.6 | 2001 | start load; compressed charge; min OAL: 1.642 |
![]() | 185 | XTP | 29.3 | 2159 | never exceed; compressed charge; min OAL: 1.642 |
![]() | 225 | Jacketed | 24.6 | 1765 | start load; compressed charge; min OAL: 1.681 |
![]() | 225 | Jacketed | 26.7 | 1913 | never exceed; compressed charge; min OAL: 1.681 |
![]() | 250 | XTP | 21.4 | 1585 | start load; min OAL: 1.685 |
![]() | 250 | XTP | 24.3 | 1765 | never exceed; min OAL: 1.685 |
![]() | 300 | Jacketed | 19.7 | 1408 | start load; min OAL: 1.752 |
![]() | 300 | Jacketed | 23.0 | 1588 | never exceed; min OAL: 1.752 |
Lee Precision Data With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. Small Rifle primer. NOTE: Industry standard cup pressure is 53,000. Some of the hard core bullet loads exceed this value. Use maximum loads with caution. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 240 | Hornady XTP-MAG | 23.9 | 1593 | |
![]() | 240 | Hornady XTP-MAG | 25.0 | 1671 | |
![]() | 240 | Hornady XTP-MAG | 26.1 | 1742 | maximum load |
Using Hornady Bullets Gun: Freedom Arms Model 83; barrel length: 7 1/2 inches; case: Starline; primer: Fed. #205; bullet diameter: .452"; COAL: 1.745"; maximum COAL: 1.765"; maximum case length: 1.383"; trim to length: 1.373". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 185 | Hornady HP/XTP | 26.5 | 1988 | starting load; COL (in.): 1.642; crimping is done over the bullet ogive |
![]() | 185 | Hornady HP/XTP | 29.3 | 2142 | maximum load; COL (in.): 1.642; crimping is done over the bullet ogive |
![]() | 225 | Speer HP | 24.5 | 1759 | starting load; COL (in.): 1.681 |
![]() | 225 | Speer HP | 26.7 | 1903 | maximum load; COL (in.): 1.681 |
![]() | 250 | Hornady HP/XTP | 21.4 | 1578 | starting load; COL (in.): 1.685 |
![]() | 250 | Hornady HP/XTP | 24.2 | 1759 | maximum load; COL (in.): 1.685 |
![]() | 300 | Speer Plated HP | 19.8 | 1414 | starting load; COL (in.): 1.752 |
![]() | 300 | Speer Plated HP | 23.0 | 1588 | maximum load; COL (in.): 1.752 |
Vihtavuori Reloading Guide 6 test barrel: 9 1/2", 1 in 24" twist; primers: Small Rifle; cases: Freedom Arms, trim-to length: 1.311"; loads less than minimum charges shown are not recommended; USE MAXIMUM LOADS WITH CAUTION! |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 300 | IMI JHP | 19.4 | 1296 | starting load |
![]() | 300 | IMI JHP | 21.3 | 1430 | maximum load |
![]() | 325 | Speer UCHP | 17.7 | 1171 | starting load |
![]() | 325 | Speer UCHP | 19.4 | 1332 | maximum load |
Vihtavuori Reloading Guide 6 test barrel: 6", 1 in 19" twist; primers: Large Pistol; cases: Speer, trim-to length: 1.280"; COL (in.): 1.575; loads less than minimum charges shown are not recommended; USE MAXIMUM LOADS WITH CAUTION! | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 300 | Jacketed | 19.4 | 1316 | start load |
![]() | 300 | Jacketed | 21.3 | 1434 | never exceed |
![]() | 325 | Jacketed | 17.7 | 1207 | start load |
![]() | 325 | Jacketed | 19.5 | 1316 | never exceed |
Lee Precision Data CAUTION: With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. Large Pistol primer. Min. OAL: 1.575 |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 300 | Speer TMJ | 30.6 | 1759 | starting load; COL (in.): 2.008 |
![]() | 300 | Speer TMJ | 36.0 | 1965 | maximum load; COL (in.): 2.008 |
![]() | 350 | Hornady HP/XTP | 27.0 | 1598 | starting load; COL (in.): 1.984 |
![]() | 350 | Hornady HP/XTP | 31.2 | 1713 | maximum load; COL (in.): 1.984 |
![]() | 400 | Sierra JSP | 25.0 | 1444 | starting load; COL (in.): 2.051 |
![]() | 400 | Sierra JSP | 31.0 | 1657 | maximum load; COL (in.): 2.051 |
Vihtavuori Reloading Guide 6 test barrel: 11", 1 in 18" twist; primers: Large Rifle; cases: Starline, trim-to length: 1.614"; loads less than minimum charges shown are not recommended; USE MAXIMUM LOADS WITH CAUTION! |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 200 | Jacketed | 7.7 | 1050 | start load; min OAL: 1.256 |
![]() | 200 | Jacketed | 8.6 | 1155 | never exceed; min OAL: 1.256 |
Lee Precision Data Large Pistol Primer. CAUTION: With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. (Modern Reloading - Second Edition - Richard Lee) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 180 | Speer HP | 8.6 | 1220 | starting load |
![]() | 180 | Speer HP | 9.9 | 1280 | maximum load |
![]() | 200 | Hornady FMJ/FP | 7.3 | 1066 | starting load |
![]() | 200 | Hornady FMJ/FP | 8.2 | 1111 | maximum load |
Vihtavuori Reloading Guide 6 test barrel: 5 1/2", 1 in 16" twist; primers: Large Pistol; cases: Remington, trim-to length: 0.988"; COL (in.): 1.256; loads less than minimum charges shown are not recommended; USE MAXIMUM LOADS WITH CAUTION! | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 200 | Hornady XTP/HP | 7.5 | 846 | |
![]() | 200 | Hornady XTP/HP | 8.0 | 951 | |
![]() | 200 | Hornady XTP/HP | 8.6 | 1097 | |
Handloads A Kimber Model 1911 Stainless Target II with a one-in-16-inch twist, 5-inch barrel was used for testing loads. Starline brass and CCI 300 Large Pistol primers used throughout. Maximum overall cartridge length: 1.260 inches; maximum case length: 0.992 inch; trim-to length: 0.982 inch. Maximum SAAMI pressure: 37,500 psi. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 40 | Sierra Hornet softpoint | 5.8 | 1676 | overall loaded length (inches): 1.470 |
![]() | 40 | Sierra Hornet softpoint | 6.3 | 1804 | maximum; overall loaded length (inches): 1.470 |
![]() | 40 | Hornady V-Max boat-tail | 5.8 | 1669 | overall loaded length (inches): 1.590 |
![]() | 40 | Hornady V-Max boat-tail | 6.3 | 1795 | maximum; overall loaded length (inches): 1.590 |
![]() | 45 | Sierra Hornet softpoint | 5.5 | 1570 | overall loaded length (inches): 1.470 |
![]() | 45 | Sierra Hornet softpoint | 6.0 | 1700 | overall loaded length (inches): 1.470 |
![]() | 45 | Speer softpoint | 5.5 | 1585 | overall loaded length (inches): 1.470 |
![]() | 45 | Speer softpoint | 6.0 | 1719 | overall loaded length (inches): 1.470 |
![]() | 45 | Hornady Bee hollowpoint | 5.5 | 1558 | overall loaded length (inches): 1.415 |
![]() | 45 | Hornady Bee hollowpoint | 6.0 | 1711 | overall loaded length (inches): 1.415 |
Handload Data Notes: An FNH Five-Seven USG with a 4 7/8-inch barrel was used to fire the test loads. FN cases and Winchester Small Pistol Magnum primers were used throughout. Case length: 1.137 inches; factory overall loaded length: 1.5925 inches. Temperature during tests was 27 degrees Fahrenheit. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 147 | XTP | 6.2 | 1056 | start load; min OAL: 1.142 |
![]() | 147 | XTP | 6.5 | 1125 | never exceed; min OAL: 1.142 |
![]() | 130 | Jacketed | 7.2 | 1171 | start load; min OAL: 1.142 |
![]() | 130 | Jacketed | 7.5 | 1252 | never exceed; min OAL: 1.142 |
Lee Precision Data Small pistol primer. CAUTION: With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 130 | Sierra FMJ | 7.0 | 1151 | starting load; COL (in.): 1.142 |
![]() | 130 | Sierra FMJ | 7.4 | 1232 | maximum load; COL (in.): 1.142 |
![]() | 147 | Hornady HP/XTP | 6.1 | 1039 | starting load; COL (in.): 1.142 |
![]() | 147 | Hornady HP/XTP | 6.4 | 1108 | maximum load; COL (in.): 1.142 |
Vihtavuori Reloading Guide 6 test barrel: 4", 1 in 10" twist; primers: Small Pistol; cases: Lapua, trim-to length: 0.748"; loads less than minimum charges shown are not recommended; USE MAXIMUM LOADS WITH CAUTION! |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 115 | Sierra FMJ | 8.1 | 1344 | starting load |
![]() | 115 | Sierra FMJ | 8.7 | 1435 | maximum load |
![]() | 123 | Lapua FMJ | 6.9 | 1220 | starting load |
![]() | 123 | Lapua FMJ | 7.4 | 1301 | maximum load |
![]() | 147 | Hornady HP-XTP | 5.8 | 1071 | starting load |
![]() | 147 | Hornady HP-XTP | 6.3 | 1139 | maximum load |
Vihtavuori Reloading Guide 6 test barrel: 5 1/2", 1 in 10" twist; primers: Small Pistol; cases: Tanfoglio, trim-to length: 0.826"; COL (in.): 1.161 (except where otherwise specified in remarks); loads less than minimum charges shown are not recommended; USE MAXIMUM LOADS WITH CAUTION! |