This fine grained, easy metering propellant has long been a favorite of upland and waterfowl handloaders. Top velocities with great patterns are legendary. Like 800-X, SR4756 performs extremely well in the big handgun cartridges. Always a top choice.
Shape | Color | Perforation | Diameter min | Diameter max | Length/thick. min | Length/thick. max | Manufacturer |
---|---|---|---|---|---|---|---|
Disk | Gray | No | 1.09 mm | 1.18 mm | 0.18 mm | 0.18 mm | Canada |
Ladedata som finnes på hjemmesidene til Evje PK er KUN ment som en veiledning! Ladedata skal alltid verifiseres mot kjente kilder (kruttprodusenter, ladebøker o.l.)
Data funnet på våre hjemmesider brukes på eget ansvar, og Evje Pistolklubb fratar seg alt ansvar for feil bruk av, eller skrivefeil i oppgitte data.
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
50 | Hornady FMJ | 1.4 | 770 | 16,900 cup | |
IMR Pistol Data case: Remington; barrel length: 2.0"; twist: 1:16"; trim length: .610"; primer: CCI 500; bullet diam.: .251"; COL: .900"; these are all maximum loads; NEVER EXCEED MAXIMUM LOADS |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
93 | Cast #313226 | 4.6 | 960 | sugg. start load | |
93 | Cast #313226 | 5.1 | 1094 | max load | |
Lyman Cast Bullet Handbook cases: Remington; trim-to length: .845"; primers: Remington 1 1/2; primer size: Small Pistol; Lyman shell holder: No. 12; cast bullets used size to .309" dia.; firearm used: Walther P-38; barrel length: 4 15/16"; twist: 1-9.85"; groove diameter: .3085"; NOTE: More Lyman cast bullet data available under .30 Luger Handgun Lyman Reloading Handbook 49th Edition | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
93 | Hornady Jacketed FMJ | 5.0 | 1038 | sugg. start load | |
93 | Hornady Jacketed FMJ | 5.5 | 1161 | max load | |
75 | Cast #311252 | 5.3 | 1209 | sugg. start load | |
75 | Cast #311252 | 6.0 | 1400 | max load | |
85 | Cast #313249 | 4.7 | 966 | sugg. start load | |
85 | Cast #313249 | 5.6 | 1182 | max load | |
Lyman Reloading Handbook 49th Edition cases: Remington; trim-to length: .845"; primers: Remington 1 1/2; primer size Small Pistol; Lyman shell holder: No. 12; jacketed bullets used: Hornady FMJ #1419, 93 gr.; cast bullets used sized to .309" dia.; firearm used: Walther P-38; barrel length: 4 15/16"; twist: 1-9.85"; groove dia.: .3085" |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
77 | Cast LFP | 3.5 | 785 | start load; COL: 1.335"; 8,400 cup; bullet diam.: .314" | |
77 | Cast LFP | 4.0 | 981 | max load; COL: 1.335"; 12,800 cup; bullet diam.: .314" | |
83 | Berry's Bullets HBWC | 3.5 | 845 | start load; COL: 1.095"; 11,700 cup; bullet diam.: .314" | |
83 | Berry's Bullets HBWC | 4.4 | 1096 | max load; COL: 1.095"; 18,400 cup; bullet diam.: .314" | |
85 | Hornady HP | 4.3 | 998 | start load; COL: 1.290"; 15,500 cup; bullet diam.: .312" | |
85 | Hornady HP | 4.9 | 1121 | max load; COL: 1.290"; 18,600 cup; bullet diam.: .312" | |
90 | Sierra JHP | 4.1 | 974 | start load; COL: 1.340"; 16,500 cup; bullet diam.: .312" | |
90 | Sierra JHP | 4.7 | 1086 | max load; COL: 1.340"; 20,800 cup; bullet diam.: .312" | |
90 | Hornady LSWC | 3.6 | 855 | start load; COL: 1.350"; 11,500 cup; bullet diam.: .314" | |
90 | Hornady LSWC | 4.2 | 1021 | max load COL: 1.350"; 16,400 cup; bullet diam.: .314" | |
100 | Speer JHP | 4.0 | 887 | start load; COL: 1.345"; 15,800 cup; bullet diam.: .312" | |
100 | Speer JHP | 4.5 | 980 | max load; COL: 1.345"; 19,700 cup; bullet diam.: .312" | |
Hodgdon Pistol Data Case: Federal; twist: 1:16"; primer: Federal 100, Small Pistol; barrel length: 5"; trim length: 1.070". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
71 | Sierra FMJ | 4.7 | 900 | sugg. start load; 12,400 cup; 1.350" OAL | |
71 | Sierra FMJ | 5.5 | 1141 | max load; 19,200 cup; 1.350" OAL | |
85 | Hornady Jacketed HP/XTP | 3.5 | 641 | sugg. start load; 11,500 cup; 1.310" OAL | |
85 | Hornady Jacketed HP/XTP | 4.8 | 1073 | max load; 20,700 cup; 1.310" OAL | |
90 | Sierra Jacketed JHC | 3.2 | 549 | sugg. start load; 9,800 cup; 1.315" OAL | |
90 | Sierra Jacketed JHC | 4.6 | 1015 | max load; 20,500 cup; 1.315" OAL | |
75 | Cast #311252 | 4.5 | 1027 | sugg. start load; 14,400 cup; 1.350" OAL | |
75 | Cast #311252 | 5.0 | 1248 | max load; 18,700 cup; 1.350" OAL | |
85 | Cast #313249 | 3.0 | 659 | sugg. start load; 8,000 cup; 1.350" OAL | |
85 | Cast #313249 | 4.6 | 1091 | max load; 18,900 cup; 1.350" OAL | |
90 | Hornady Swaged Lead HBWC | 3.6 | 861 | sugg. start load; 14,100 cup; 1.100" OAL | |
90 | Hornady Swaged Lead HBWC | 4.0 | 975 | max load; 18,900 cup; 1.100" OAL | |
Lyman Reloading Manual 49th Edition cases: Federal; trim-to length: 1.065"; primers: Federal 100; primer size: Small Pistol; Lyman shell holder: No. 9; cast bullets used sized to .313" dia.; firearm used: Universal Receiver; barrel length: 5"; twist: 1-16"; groove dia.: .312" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
90 | Sierra JHC | 3.6 | 749 | ||
90 | Sierra JHC | 3.9 | 811 | ||
90 | Sierra JHC | 4.1 | 883 | ||
90 | Sierra JHC | 4.4 | 956 | ||
90 | Sierra JHC | 4.7 | 1028 | ||
90 | Sierra JHC | 4.9 | 1100 | ||
90 | Sierra JHC | 5.2 | 1160 | ||
using Sierra bullets Gun: Ruger Single-Six Custom; Barrel Length: 6 1/2 inches; Case: Starline; Primer: Winchester Small Pistol; Bullet Diameter: .312 inch; COAL: 1.350 inches; Maximum COAL: 1.350 inches; Maximum Case Length: 1.075 inches; Trim to Length: 1.070 inches. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
90 | Hornady SWC (swaged alloy) | 5.0 | 767 | case expansion: near max | |
in a 3 Inch Barrel H&R Model 504. Federal cases and Federal 100 primers used in all loads. All loads chronographed 10 feet from the muzzle with an Oehler Model 33 chronotach. Overall cartridge length refers to seating for Ruger; all loads for H&R had 1.33-inch OAL. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
76 | Lyman RN 311252 | 5.5 | 1,245 | standard deviation: 18 | |
81 | Lyman WC 313492 | 5.5 | 1,186 | standard deviation: 50 | |
112 | Lyman SWC GC 311316 | 5.1 | 1,083 | standard deviation: 14 | |
85 | Hornady JHP | 5.1 | 1,098 | standard deviation: 28 | |
in a 4-inch Barrel All loads were below maximum in the test gun, but should be approached from .5 grain below in any other gun. Cast bullets were moulded from type metal, consequently their weights differed slightly from advertised weights. Federal cases 57-grain primed. CCI No. 500 primers. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
90 | Hornady SWC (swaged alloy) | 5.0 | 998 | case expansion: near max; accuracy class (Ruger): A | |
90 | Hornady SWC (swaged alloy) | 5.3 | 1,021 | case expansion: maximum; accuracy class (Ruger): C | |
116 | Lyman 3118 (cast alloy) | 5.1 | 1,006 | case expansion: maximum; accuracy class (Ruger): A; accurate | |
85 | Hornady JHP | 5.5 | 1,116 | case expansion: maximum; accuracy class (Ruger): C | |
85 | Hornady JHP | 5.3 | 1,068 | case expansion: near max; accuracy class (Ruger): B | |
in a 6 1/2 Inch Barrel Ruger Bisley. Federal cases and Federal 100 primers used in all loads. All loads chronographed 10 feet from the muzzle with an Oehler Model 33 chronotach. Overall cartridge length refers to seating for Ruger; all loads for H&R had 1.33-inch OAL. Accuracy rating schedule: A+ = under 1-inch (at 20 yards); A = 1 to 1 1/4 inches; B = 1 1/4 + to 1 1/2 inches; C = 1 1/2 + to 2 inches; D = over 2 inches | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
76 | Lyman RN 311252 | 5.5 | 1,375 | standard deviation: 39 | |
81 | Lyman WC 313492 | 5.5 | 1,312 | standard deviation: 53 | |
112 | Lyman SWC GC 311316 | 5.1 | 1,100 | standard deviation: 16 | |
85 | Hornady JHP | 5.1 | 1,235 | standard deviation: 27 | |
in a 6-inch Barrel All loads were below maximum in the test gun, but should be approached from .5 grain below in any other gun. Cast bullets were moulded from type metal, consequently their weights differed slightly from advertised weights. Federal cases 57-grain primed. CCI No. 500 primers. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
85 | Hornady HP XTP | 3.7 | 774 | Do Not Reduce | |
85 | Hornady HP XTP | 4.2 | 915 | maximum load | |
Revolver Using Hornady Bullets Gun: Ruger Single Six; barrel length: 6 1/2 inches; case: Starline; primer: Winchester Small Pistol; bullet diameter: .312"; 85 GR Hornady HP XTP & 90 GR SWC COAL: 1.350"; 90 GR HBWC COAL: 1.100"; 100 GR HP XTP COAL: 1.315"; maximum COAL: 1.350"; maximum case length: 1.075"; trim to length: 1.065". |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
91 | Lyman 313249 | 3.8 | 882 | Case: R-P | |
112 | Lyman 3118 | 3.5 | 833 | Case: Remington, Good load. | |
112 | Lyman 3118 | 3.8 | 929 | Case: R-P, Fine high velocity load. | |
in a 6-inch barrel Test gun for all loads was a Colt Officer's Model Heavy Barrel six inch length. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
100 | Hornady Jacketed HP | 3.7 | 677 | sugg. start load; 1.160" OAL | |
100 | Hornady Jacketed HP | 4.1 | 761 | max load; 1.160" OAL | |
Lyman Reloading Handbook 49th Edition cases: Remington; trim-to length: .910"; primers: Remington 1 1/2; primer size: Small Pistol; Lyman shell holder: No. 9; cast bullets used sized to .312" dia.; firearm used: Smith & Wesson Model 31; barrel length: 4"; twist: 1-18 3/4"; groove dia.: .312" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
84 | RCBS 32-84WC | 2.9 | 779 | 113 energy (ft-lb); group (in): 1.85 | |
84 | RCBS 32-84RN | 2.9 | 652 | 79 energy (ft-lb); group (in): 1.70 | |
in the Contender Cast Bullets |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
85 | Hornady Jacketed HP/XTP | 4.5 | 748 | sugg start load; 1.535" OAL | |
85 | Hornady Jacketed HP/XTP | 5.8 | 1101 | max load; 1.535" OAL | |
90 | Sierra Jacketed HC | 5.2 | 791 | sugg. start load; 1.535" OAL | |
90 | Sierra Jacketed HC | 5.5 | 928 | max load; 1.535" OAL | |
100 | Speer Jacketed HP | 4.8 | 683 | sugg. start load; 11,500 cup; 1.560" OAL | |
100 | Speer Jacketed HP | 5.4 | 795 | max load; 13,000 cup; 1.560" OAL | |
115 | Cast #311008 | 4.0 | 735 | sugg. start load; 1.530" OAL | |
115 | Cast #311008 | 4.7 | 896 | max load; 1.530" OAL | |
Lyman Reloading Handbook 49th Edition cases: Winchester; trim-to length: 1.305"; primers: Winchester WSP; primer size: Small Pistol; Lyman shell holder: No. 10; cast bullets used sized to .313" dia.; firearm used: Ruger Blackhawk and Universal Receiver; barrel length: 6 1/2"; twist: 1-16"; groove dia.: .312" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
113 | Lyman 3118 | 5.0 | 705 | case: Win.; primer: R 1 1/2; expansion: moderate | |
113 | Lyman 3118 | 6.0 | 992 | case: Win.; primer: R 1 1/2; expansion: maximum; author's pet load | |
115 | Markell Golden Arrow | 6.0 | 1,154 | case: R-P; primer: F 100; expansion: maximum; 2nd most accurate; highest velocity | |
100 | Hornady | 6.0 | 967 | case: R-P; primer: F 100; expansion: near max; .308 bullet | |
Revolver Velocities instrumental at nine feet from muzzle of Smith & Wesson Model 1905 with six-inch barrel. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
77 | Cast LFP | 5.8 | 1174 | start load; bullet diam.: .314"; COL: 1.460"; 15,300 psi | |
77 | Cast LFP | 7.0 | 1422 | max load; bullet diam.: .314"; COL: 1.460"; 23,900 psi | |
85 | Hornady XTP | 6.5 | 1304 | start load; COL: 1.450"; 27,700 psi | |
85 | Hornady XTP | 7.1 | 1451 | max load; COL: 1.450"; 37,800 psi | |
90 | Cast LRNFP | 5.3 | 1170 | start load; COL: 1.460"; 19,200 psi | |
90 | Cast LRNFP | 6.0 | 1291 | max load; COL: 1.460"; 25,300 psi | |
90 | Sierra JHC | 6.3 | 1285 | start load; COL: 1.460"; 24,300 psi | |
90 | Sierra JHC | 7.4 | 1486 | max load; COL: 1.460"; 40,500 psi | |
100 | Hornady XTP | 5.8 | 1243 | start load; COL: 1.450"; 32,900 psi | |
100 | Hornady XTP | 6.6 | 1352 | max load; COL: 1.450"; 41,500 psi | |
115 | MEI LRNFP | 4.7 | 1047 | start load; COL: 1.460"; 20,900 psi | |
115 | MEI LRNFP | 5.8 | 1231 | max load; COL: 1.460"; 37,400 psi | |
Hodgdon Data Case: Federal; barrel length: 5"; twist: 1:16"; trim length: 1.200"; primer: Federal 200; bullet diam.: .312 (except where otherwise specified in remarks). NEVER EXCEED MAXIMUM LOADS |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
110 | Jacketed | 9.5 | 1330 | start load; min OAL: 1.590 | |
110 | Jacketed | 9.5 | 1330 | never exceed; min OAL: 1.590; 35,800 cup | |
125 | Jacketed | 8.6 | 1180 | start load; min OAL: 1.580 | |
125 | Jacketed | 8.6 | 1180 | never exceed; min OAL: 1.580; 35,800 cup | |
140 | Jacketed | 8.2 | 1025 | start load; min OAL: 1.590 | |
140 | Jacketed | 8.2 | 1025 | never exceed; min OAL: 1.590; 35,500 cup | |
146 | Jacketed | 7.9 | 1060 | start load; min OAL: 1.500 | |
146 | Jacketed | 7.9 | 1060 | never exceed; min OAL: 1.500; 36,000 cup | |
148 | Wadcutter | 8.5 | 1215 | start load; min OAL: 1.420 | |
148 | Wadcutter | 8.5 | 1215 | never exceed; min OAL: 1.420; 35,600 cup | |
150 | Jacketed | 6.7 | 854 | start load; min OAL: 1.590 | |
150 | Jacketed | 7.8 | 975 | never exceed; min OAL: 1.590; 35,800 cup | |
158 | Jacketed | 7.5 | 940 | start load; min OAL: 1.580 | |
158 | Jacketed | 7.5 | 940 | never exceed; min OAL: 1.580; 35,700 cup | |
158 | Lead | 7.7 | 1111 | start load; min OAL: 1.580 | |
158 | Lead | 7.7 | 1111 | never exceed; min OAL: 1.580; 35,800 cup | |
170 | Jacketed | 7.1 | 885 | start load; min OAL: 1.580 | |
170 | Jacketed | 7.1 | 885 | never exceed; min OAL: 1.580; 35,600 cup | |
200 | Lead | 6.2 | 885 | start load; min OAL: 1.590 | |
200 | Lead | 6.2 | 885 | never exceed; min OAL: 1.590; 35,900 cup | |
Lee Precision Data Small Pistol Primer. With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
158 | Nosler Sporting Handgun Jacketed Hollow Point | 7.9 | 1,340 | maximum load | |
158 | Nosler Sporting Handgun Jacketed Hollow Point | 7.4 | 1,310 | ||
158 | Nosler Sporting Handgun Jacketed Hollow Point | 6.9 | 1,280 | most accurate load tested | |
Using 158 GR Nosler Bullets Handgun; Case: Federal; primer: WSPM; barrel length/make: 8.3" H-S Precision; twist: 1-16"; bullets: 158 GR Sporting Handgun Revolver JHP; OACL: 1.585"; maximum OACL: 1.590". Use Maximum Loads with Caution | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
115 | Cast #358345 | 6.8 | 1137 | sugg. start load; 19,600 cup | |
115 | Cast #358345 | 12.0 | 1626 | max load; 41,900 cup | |
Lyman Cast Bullet Handbook cases: Federal; trim-to length: 1.285"; primers: CCI 550; primer size: Small Pistol Magnum; Lyman shell holder: No. 1; cast bullets used size to .357" dia.; firearm used: Universal Receiver and Special Vented Barrel; barrel length: 4"; twist: 1-18 3/4"; groove diameter: .356" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
195 | Lyman 358430 cast | 7.0 | 978 | overall loaded length (inches): 1.676; group (inches): 4.85 | |
Heavy Bullet Loads Group sizes are the average of five shots fired at 25 yards. Velocities were recorded 10 feet in front of the muzzle of a Smith & Wesson 686 Plus with a 4-inch barrel using Remington cases and Winchester Small Pistol primers (except where noted otherwise in remarks). The revolver was held by hand over a rest to shoot the groups. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
110 | Hornady XTP | 6.5 | 1292 | start load; COL: 1.590"; 18,500 psi | |
110 | Hornady XTP | 8.5 | 1574 | max load; COL: 1.590"; 32,700 psi | |
125 | Hornady XTP | 6.0 | 1169 | start load; COL: 1.590"; 18,600 psi | |
125 | Hornady XTP | 7.8 | 1427 | max load; COL: 1.590"; 30,600 psi | |
125 | MEI Cast LRNFP | 5.0 | 1034 | start load; bullet diam.: .358"; COL: 1.580"; 11,700 psi | |
125 | MEI Cast LRNFP | 7.0 | 1378 | max load; bullet diam.: .358"; COL: 1.580"; 24,500 psi | |
130 | MEI Cast LRNFP | 5.5 | 1116 | start load; bullet diam.: .358"; COL: 1.580"; 14,000 psi | |
130 | MEI Cast LRNFP | 6.7 | 1322 | max load; bullet diam.: .358"; COL: 1.580"; 22,800 psi | |
140 | Hornady XTP | 5.3 | 974 | start load; COL: 1.590"; 15,800 psi | |
140 | Hornady XTP | 7.3 | 1307 | max load; COL: 1.590"; 31,300 psi | |
146 | Speer JHP | 4.5 | 833 | start load; COL: 1.535"; 13,700 psi | |
146 | Speer JHP | 6.5 | 1218 | max load; COL: 1.535"; 27,700 psi | |
148 | Hornady LHBWC | 3.8 | 860 | start load; bullet diam.: .358"; COL: 1.290"; 13,300 psi | |
148 | Hornady LHBWC | 4.5 | 1008 | max load; bullet diam.: .358"; COL: 1.290"; 20,000 psi | |
158 | Hornady XTP | 5.0 | 896 | start load; COL: 1.580"; 17,500 psi | |
158 | Hornady XTP | 6.5 | 1146 | max load; COL: 1.580"; 29,900 psi | |
158 | MEI Cast LSWC | 5.0 | 968 | start load; COL: 1.620"; 13,800 psi | |
158 | MEI Cast LSWC | 6.5 | 1214 | max load; COL: 1.620"; 27,600 psi | |
170 | Sierra JHC | 5.0 | 863 | start load; COL: 1.580"; 18,800 psi | |
170 | Sierra JHC | 6.2 | 1085 | max load; COL: 1.580"; 30,200 psi | |
180 | Nosler Part | 4.5 | 620 | start load; COL: 1.575"; 20,800 psi | |
180 | Nosler Part | 5.7 | 888 | max load; COL: 1.575"; 32,800 psi | |
Pistol - Hodgdon Data Case: Winchester; barrel length: 10"; twist: 1:18.75"; trim length: 1.285"; primer: Winchester SPM; bullet diam.: .357" (except where otherwise specified in remarks). NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
110 | Sierra JHC | 12.0 | MAXIMUM | ||
110 | Sierra JHC | 12.5 | pressure signs | ||
110 | Sierra JHC | 13.0 | pressure signs | ||
125 | Sierra JHC | 11.0 | pressure signs | ||
125 | Sierra JHC | 11.5 | pressure signs | ||
125 | Sierra JHC | 12.0 | pressure signs | ||
Snub-gun Loads 2 1/2-inch S&W Model 19; approach all maximum loads with caution; all loads used CCI 550 primers; no velocities provided in this table except where noted from "Speer Reloading Manual #8" |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
125 | Speer GD-HP | 9.1 | 1376 | COL: 1.135"; 38,900 psi | |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
90 | Sierra Jacketed HP | 9.4 | 1451 | sugg. start load; 34,300 psi; 1.140" OAL | |
90 | Sierra Jacketed HP | 10.5 | 1558 | max load; 39,100 psi; 1.140" OAL | |
115 | Sierra Jacketed HP | 8.2 | 1242 | sugg. start load; 31,400 psi; 1.140" OAL | |
115 | Sierra Jacketed HP | 9.2 | 1372 | max load; 39,300 psi; 1.140" OAL | |
125 | Speer Gold Dot Jacketed HP | 7.8 | 1202 | sugg. start load; 34,100 psi; 1.135" OAL | |
125 | Speer Gold Dot Jacketed HP | 8.7 | 1293 | max load; 38,300 psi; 1.135" OAL | |
147 | Speer TMJ | 6.2 | 1030 | sugg. start load; 34,300 psi; 1.135" OAL | |
147 | Speer TMJ | 6.9 | 1099 | max load; 39,000 psi; 1.135" OAL | |
Lyman Reloading Handbook 49th Edition cases: Federal; trim-to length: .860"; primers: Federal 100; primer size: Small Pistol; Lyman shell holder: No. 15; firearm used: Universal Receiver; barrel length: 4"; twist: 1-16"; groove dia.: .3553" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
90 | Hornady HP-XTP | 8.3 | 1356 | ||
90 | Hornady HP-XTP | 8.6 | 1398 | ||
90 | Hornady HP-XTP | 8.9 | 1440 | ||
90 | Hornady HP-XTP | 9.2 | 1483 | maximum load | |
115 | Hornady HP-XTP or FMJ-RN | 6.9 | 1151 | ||
115 | Hornady HP-XTP or FMJ-RN | 7.2 | 1200 | ||
115 | Hornady HP-XTP or FMJ-RN | 7.5 | 1256 | ||
115 | Hornady HP-XTP or FMJ-RN | 7.8 | 1313 | ||
115 | Hornady HP-XTP or FMJ-RN | 8.1 | 1370 | ||
115 | Hornady HP-XTP or FMJ-RN | 8.4 | 1421 | maximum load | |
124 | Hornady HP-XTP | 6.6 | 1137 | ||
124 | Hornady HP-XTP | 7.0 | 1188 | ||
124 | Hornady HP-XTP | 7.3 | 1248 | ||
124 | Hornady HP-XTP | 7.7 | 1308 | ||
124 | Hornady HP-XTP | 8.1 | 1364 | maximum load | |
Using Hornady Bullets Gun: Glock Model 31; barrel length: 4.48 inch; case: Starline; primer: Winchester Small Pistol; bullet diameter: .355"; COAL: 1.140"; maximum COAL: 1.140"; maximum case length: .865"; trim to length: .860". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
124 | Nosler Sporting Handgun JHP | 8.7 | 1284 | max; compressed load | |
124 | Nosler Sporting Handgun JHP | 8.2 | 1237 | most accurate load tested | |
124 | Nosler Sporting Handgun JHP | 7.7 | 1181 | ||
Using Nosler Bullets Case: Federal; primer: WSP; barrel length/make: 3.9" Sig; twist: 1-16"; bullets: 115 GR Nosler Sporting Handgun Pistol JHP - OACL: 1.140"; 124 GR Sporting Handgun Pistol JHP - OACL: 1.120"; maximum OACL: 1.140". Contrary to the cartridge designation, the 357 Sig uses 9mm (.355") bullets. Both the 115 and 124 grain 9mm Sporting Handgun Pistol bullets are suitable for loading in the .357 Sig. Use Maximum Loads with Caution | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
125 | Bushwacker SWC | 6.0 | 1,033 | group: 2.32 inches | |
125 | Bushwacker SWC | 6.4 | 1,092 | group: 1.54 inches | |
in an S&W 4006 Smith & Wesson Model 4006 with a custom Bar-Sto 4-inch barrel and Millett adjustable open sights was used for testing. Starline cases and Winchester Small Pistol primers (WSP) were used for all handloads. Velocities were taken 12 feet from the gun's muzzle with an Oehler Model 33 or Model 35P chronograph. Accuracy is the average of three, five-shot groups at 15 yards from a sandbag rest. Range temperatures wer 58 to 74 degrees Fahrenheit. .355-inch jacketed and .356-inch cast bullets. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
115 | Jacketed | 4.8 | 902 | start load; min OAL: 1.265 | |
115 | Jacketed | 5.2 | 965 | never exceed; min OAL: 1.265; 21,800 cup | |
Lee Precision Data CAUTION: With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. Small Pistol primer. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
92 | Cast #358242 | 4.0 | 758 | sugg. start load; Special Pressure Test Barrel; 7,300 cup; potentially most accurate load | |
92 | Cast #358242 | 4.9 | 968 | max load; Special Pressure Test Barrel; 12,500 cup | |
Lyman Cast Bullet Handbook cases: Winchester; trim-to length: .765"; primers: Winchester 1 1/2-108; primer size: Small Pistol; Lyman shell holder: No. 21; cast bullets used size to .360" dia.; firearm used: Special Pressure test barrel; Smith & Wesson Model 33; barrel length: 4"; twist: 1-18 3/4"; groove diameter: .361" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
150 | Magma 38-158 RNFP | 3.2 | 685 | group: 2 1/2 inches | |
Colt Police Positive Test gun was a Colt Police Positive with a 4-inch barrel. These loads duplicate the standard factory load with a 150-grain bullet at 695 fps. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
148.5 | Rapine 358150 | 3.4 | 767 | group: 1 1/2 inches | |
Model 33 Test gun was an S&W Model 33 with a 4-inch barrel. These loads duplicate the standard factory load with a 148-grain bullet at 745 fps. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
200 | Lyman 358430 | 2.7 | 650 | group: 2 3/4 inches | |
Victory Model Test gun was an S&W Victory Model with a 5-inch barrel. These loads duplicate the 200-grain Super Police or .380 Revolver Mk I loads with a 200-grain bullet at 650 fps from a 5-inch barrel and 630 fps from a 4-inch barrel. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
146 | Speer 146 SWC | 9.5 | 1,130 | ||
Colt Peacemaker Loads Winchester +P cases used throughout with CCI 450 primers. (Loading the Peacemaker - Dave Scovill) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
155 | Cast gas check #358156 (Linotype) | 4.2 | 630 | sugg. start load; 1.460" OAL; 9,500 cup | |
155 | Cast gas check #358156 (Linotype) | 5.5 | 898 | max load; 1.460" OAL; 16,700 cup | |
158 | Cast #358665 (Linotype) | 4.9 | 785 | sugg. start load; 1.445" OAL; 13,000 cup | |
158 | Cast #358665 (Linotype) | 5.5 | 872 | max load; 1.445" OAL; 15,800 cup | |
160 | Cast #358311 (Linotype) | 4.2 | 620 | sugg. start load; 1.550" OAL; 8,700 cup | |
160 | Cast #358311 (Linotype) | 5.5 | 874 | max load; 1.550" OAL; 16,000 cup | |
170 | Cast #358429 (Linotype) | 4.2 | 645 | sugg. start load; 1.537" OAL; 10,000 cup | |
170 | Cast #358429 (Linotype) | 5.4 | 836 | max load; 1.537" OAL; 16,400 cup | |
Cast Bullet Data Lyman Reloading Handbook 49th Edition cases: Federal; trim-to length: 1.149"; primers: CCI 500; primer size: Small Pistol; Lyman shell holder: No. 1; cast bullets used sized to .358" dia.; firearm used: Universal Receiver; barrel length: 4"; twist: 1-18 3/4"; groove dia.: .357"; (+P) designates higher pressure loads | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
110 | Hornady XTP | 5.5 | 913 | start load; bullet diam.: .357"; COL: 1.455"; 12,300 psi | |
110 | Hornady XTP | 6.2 | 1083 | max load; bullet diam.: .357"; COL: 1.455"; 15,200 psi | |
125 | Hornady XTP | 5.3 | 939 | start load; bullet diam.: .357"; COL: 1.455"; 14,700 psi | |
125 | Hornady XTP | 6.0 | 1046 | max load; bullet diam.: .357"; COL: 1.455"; 16,400 psi | |
125 | Cast LRNFP | 5.4 | 974 | start load; bullet diam.: .358"; COL: 1.445"; 13,300 psi | |
125 | Cast LRNFP | 6.0 | 1091 | max load; bullet diam.: .358"; COL: 1.445"; 16,100 psi | |
130 | MEI Cast LRNFP | 5.3 | 916 | start load; bullet diam.: .358"; COL: 1.460"; 12,900 psi | |
130 | MEI Cast LRNFP | 5.9 | 1046 | max load; bullet diam.: .358"; COL: 1.460"; 15,300 psi | |
140 | Hornady XTP | 4.9 | 774 | start load; bullet diam.: .357"; COL: 1.455"; 13,100 psi | |
140 | Hornady XTP | 5.5 | 938 | max load; bullet diam.: .357"; COL: 1.455"; 16,900 psi | |
140 | Hornady Cowboy | 5.1 | 946 | start load; bullet diam.: .358"; COL: 1.450"; 13,400 psi | |
140 | Hornady Cowboy | 5.7 | 1018 | max load; bullet diam.: .358"; COL: 1.450"; 15,900 psi | |
146 | Speer JHP | 4.3 | 686 | start load; bullet diam.: .357"; COL: 1.370"; 12,700 psi | |
146 | Speer JHP | 4.8 | 851 | max load; bullet diam.: .357"; COL: 1.370"; 15,900 psi | |
148 | Hornady LHBWC | 3.5 | 732 | start load; bullet diam.: .358"; COL: 1.160"; 12,300 psi | |
148 | Hornady LHBWC | 4.0 | 854 | max load; bullet diam.: .358"; COL: 1.160"; 16,200 psi | |
158 | Hornady XTP | 4.8 | 774 | start load; bullet diam.: .357"; COL: 1.455"; 13,400 psi | |
158 | Hornady XTP | 5.3 | 888 | max load; bullet diam.: .357"; COL: 1.455"; 16,400 psi | |
158 | MEI Cast LSWC | 4.7 | 812 | start load; bullet diam.: .358"; COL: 1.475"; 12,700 psi | |
158 | MEI Cast LSWC | 5.3 | 954 | max load; bullet diam.: .358"; COL: 1.475"; 16,300 psi | |
170 | Sierra JHC | 4.4 | 665 | start load; bullet diam.: .357"; COL: 1.450"; 12,300 psi | |
170 | Sierra JHC | 4.9 | 800 | max load; bullet diam.: .357"; COL: 1.450"; 15,900 psi | |
Hodgdon Pistol Data Case: Winchester; twist: 1:18.75"; primer: Winchester SP, Small Pistol; barrel length: 7.7"; trim length: 1.145". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
158 | Cast #358156 gas check | 4.2 | 630 | sugg. start load; 9,500 cup | |
158 | Cast #358156 gas check | 5.5 | 898 | max load; 16,700 cup | |
158 | Cast #358311 | 4.2 | 620 | sugg. start load; 8,700 cup | |
158 | Cast #358311 | 5.5 | 874 | max load; 16,000 cup | |
162 | Cast #357446 | 4.6 | 694 | sugg. start load; 10,400 cup | |
162 | Cast #357446 | 5.8 | 921 | max load; 16,800 cup | |
168 | Cast #358429 | 4.2 | 645 | sugg. start load; 10,000 cup | |
168 | Cast #358429 | 5.4 | 836 | max load; 16,400 cup | |
Lyman Cast Bullet Handbook 3rd Edition cases: Federal; trim-to length: 1.149"; primers: CCI 500; primer size: Small Pistol; Lyman shell holder: No. 1; cast bullets used size to .357" dia.; firearm used: Universal Receiver and Special Vented Barrel; barrel length: 4"; twist: 1-18 3/4"; groove diameter: .357". NOTE: More Lyman cast bullet data available under .38 Special (Cast Bullet Data Lyman Reloading Manual 49th Edition) and .38 Special (Lyman Cast Bullet Handbook 4th Edition). NOTE: Loads designated with the symbol (+P) are higher pressure loads to give greater velocities. These loads should be used only in arms recommended for (+P) type cartridges by the gun manufacturer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
110 | Speer Jacketed HP | 5.8 | 675 | sugg. start load; 1.430" OAL; 9,100 cup | |
110 | Speer Jacketed HP | 7.3 | 980 | max load; 1.430" OAL; 16,400 cup | |
110 | Speer Jacketed HP | 7.5 (+P) | 1027 | max load; 1.430" OAL; 17,500 cup | |
125 | Hornady Jacketed HP | 4.8 | 535 | sugg. start load; 1.470" OAL; 7,400 cup | |
125 | Hornady Jacketed HP | 6.3 | 874 | max load; 1.470" OAL; 16,200 cup | |
146 | Speer Jacketed HP | 5.0 | 633 | sugg. start load; 1.408" OAL; 13,400 cup | |
146 | Speer Jacketed HP | 5.6 | 778 | max load; 1.408" OAL; 16,600 cup | |
158 | Hornady Jacketed HP | 4.9 | 611 | sugg. start load; 1.480" OAL; 13,800 cup | |
158 | Hornady Jacketed HP | 5.4 | 705 | max load; 1.480" OAL; 16,800 cup | |
Lyman Reloading Handbook 49th Edition Warning! cases: Federal; trim-to length: 1.149"; primers: CCI 500; primer size: Small Pistol; Lyman shell holder: No. 1; firearm used: Universal Receiver; barrel length: 4"; twist: 1-18 3/4"; groove dia.: .357"; (+P) designates higher pressure loads | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
158 | Speer LSWC, LSWC HP or LRN | 5.0 | 844 | start charge | |
158 | Speer LSWC, LSWC HP or LRN | 5.6 | 967 | maximum charge | |
Speer Reloading Manual #14 max. case length: 1.155"; trim-to length: 1.145"; max cart. OAL: 1.550"; RCBS shell holder: #6; cart. case: Speer; primer: CCI 500; 550; test firearm: S&W Model 14; barrel length: 6"; use maximum loads with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
158 | Nosler Sporting Handgun Jacketed Hollow Point | 5.2 | 865 | maximum load; most accurate load tested | |
158 | Nosler Sporting Handgun Jacketed Hollow Point | 4.7 | 751 | ||
158 | Nosler Sporting Handgun Jacketed Hollow Point | 4.2 | 637 | ||
Using Nosler Bullets Handgun; Case: Federal; primer: WSP; barrel length/make: 7.75" H-S Precision; twist: 1-16"; bullets: 158 GR Sporting Handgun Revolver JHP; OACL: 1.440"; maximum OACL: 1.550". Use Maximum Loads with Caution | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
110 | Hornady XTP | 6.6 | 1163 | 17,600 psi | |
125 | Hornady XTP | 6.1 | 1129 | 18,300 psi | |
140 | Hornady XTP | 5.6 | 983 | 17,800 psi | |
146 | Speer JHP | 5.1 | 910 | COL: 1.370"; 18,000 psi | |
150 | Nosler JFP | 6.0 | 974 | COL: 1.450"; 18,000 psi | |
158 | Hornady XTP | 5.5 | 928 | 17,900 psi | |
170 | Sierra JHC | 5.1 | 846 | COL: 1.450"; 17,800 psi | |
+P Hodgdon Pistol Data Maximum Loads case: Winchester; barrel length: 7.7"; twist: 1:18.75"; trim length: 1.145"; primer: Winchester SP; bullet diam.: .357"; COL: 1.455" (except where otherwise specified in remarks); NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
140 | Speer UCHP | 5.4 | 860 | start charge | |
140 | Speer UCHP | 5.9 | 933 | maximum charge | |
+P Speer Reloading Manual #14 max. case length: 1.155"; trim-to length: 1.145"; max cart. OAL: 1.550"; RCBS shell holder: #6; cart. case: Speer; primer: CCI 500; test firearm: S&W Model 14; barrel length: 6"; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
95 | Jacketed | 6.1 | 1020 | start load; min. OAL: 1.470 | |
95 | Jacketed | 6.5 | 1080 | NEVER EXCEED; 15,900 cup; min. OAL: 1.470 | |
110 | Jacketed | 5.9 | 1000 | start load; min. OAL: 1.460 | |
110 | Jacketed | 6.2 | 1040 | NEVER EXCEED; 15,600 cup; min. OAL: 1.460 | |
125 | Jacketed | 5.7 | 873 | start load; min. OAL: 1.525 | |
125 | Jacketed | 6.1 | 925 | NEVER EXCEED; 15,900 cup; min. OAL: 1.525 | |
140 | Jacketed | 5.2 | 723 | start load; min. OAL: 1.455 | |
140 | Jacketed | 5.6 | 765 | NEVER EXCEED; 16,000 cup; min. OAL: 1.455 | |
146 | Jacketed | 5.0 | 808 | start load; min. OAL: 1.395 | |
146 | Jacketed | 5.2 | 840 | NEVER EXCEED; 15,600 cup; min. OAL: 1.395 | |
148 | Wad Cutter | 4.9 | 855 | start load; min. OAL: 1.295 | |
148 | Wad Cutter | 5.2 | 905 | NEVER EXCEED; 16,000 cup; min. OAL: 1.295 | |
150 | Jacketed | 5.0 | 723 | start load; min. OAL: 1.445 | |
150 | Jacketed | 5.4 | 765 | NEVER EXCEED; 16,000 cup; min. OAL: 1.445 | |
158 | Jacketed | 5.1 | 691 | start load; min. OAL: 1.465 | |
158 | Jacketed | 5.2 | 705 | NEVER EXCEED; 15,300 cup; min. OAL: 1.465 | |
158 | Lead | 4.9 | 785 | start load; min. OAL: 1.520 | |
158 | Lead | 5.2 | 825 | NEVER EXCEED; 15,800 cup; min. OAL: 1.520 | |
200 | Lead | 4.1 | 705 | start load; min. OAL: 1.500 | |
200 | Lead | 4.3 | 740 | NEVER EXCEED; 15,700 cup; min. OAL: 1.500 | |
Lee Precision Data With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. Small Pistol Primer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
145 | Hensley & Gibbs No. 73 semiwadcutter | 5.5 | 626 | case expansion near maximum; accurate in six-inch and 8 3/8" barrel | |
Cast Bullet Loads in a 2-inch Barrel Loads labeled "maximum" should not be exceeded! Reduce maximum loads 10% for light and alloy-framed guns. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
158 | Lyman 358156 semiwadcutter | 5.7 | 835 | case expansion maximum | |
145 | Hensley & Gibbs No. 73 semiwadcutter | 5.0 | 653 | case expansion moderate | |
145 | Hensley & Gibbs No. 73 semiwadcutter | 5.5 | 818 | case expansion near maximum; accurate in six-inch and 8 3/8" barrel | |
Cast Bullet Loads in a 6-inch Barrel Loads labeled "maximum" should not be exceeded! Reduce maximum loads 10% for light and alloy-framed guns. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
145 | Hensley & Gibbs No. 73 semiwadcutter | 5.5 | 862 | case expansion near maximum; accurate in six-inch and 8 3/8" barrel | |
Cast Bullet Loads in an 8 3/8-inch Barrel Loads labeled "maximum" should not be exceeded! Reduce maximum loads 10% for light and alloy-framed guns. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
110 | Sierra JHC | 9.2 | satisfactory | ||
110 | Sierra JHC | 10.0 | satisfactory | ||
110 | Sierra JHC | 11.0 | MAXIMUM | ||
110 | Sierra JHC | 12.0 | excessive | ||
125 | Sierra JHC | 8.7 | satisfactory | ||
125 | Sierra JHC | 9.0 | satisfactory | ||
125 | Sierra JHC | 10.0 | 1,129 | MAXIMUM; muzzle velocity for a 2-inch barrel according to the "Speer Reloading Manual Number 8", when using Speer bullets of like weight | |
125 | Sierra JHC | 11.0 | excessive | ||
158 | Hornady JHP | 8.5 | 1,000 | satisfactory; muzzle velocity for a 2-inch barrel according to the "Speer Reloading Manual Number 8", when using Speer bullets of like weight | |
158 | Hornady JHP | 8.8 | satisfactory | ||
158 | Hornady JHP | 9.2 | satisfactory | ||
158 | Hornady JHP | 9.5 | MAXIMUM | ||
158 | Hornady JHP | 10.0 | excessive | ||
158 | Hornady JFP | 8.5 | 1,000 | satisfactory; muzzle velocity for a 2-inch barrel according to the "Speer Reloading Manual Number 8", when using Speer bullets of like weight | |
158 | Hornady JFP | 9.5 | MAXIMUM | ||
110 | Hornady JFP | 11.0 | MAXIMUM | ||
127 | Swaged JFP | 10.0 | 1,129 | MAXIMUM; muzzle velocity for a 2-inch barrel according to the "Speer Reloading Manual Number 8", when using Speer bullets of like weight | |
Snub-gun Loads 2-inch S&W Model 49; approach all maximum loads with caution; all loads used CCI 500 primers; no velocities provided in this table except where noted from "Speer Reloading Manual #8" |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
148 | Precision | 3.9 | 592 | Best group: .94 | |
6-Inch Barrel Colt 357 Revolver. Precision, Speer H.B. and Hornady wadcutters were all of hollow-base design, while the Speer Standard and RCBS-Mould cast bullets were solid flat-base type. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
115 | Hornady XTP | 5.2 | 965 | max load; COL: 1.245"; 21,800 cup | |
Hodgdon Data Case: Remington; twist: 1:16"; primer: Remington 1 1/2, Small Pistol; barrel length: 5"; trim length: .895"; bullet diam.: .355" (except where otherwise specified in remarks). | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
115 | Hornady HP | 5.2 | 965 | 21,800 cup | |
IMR Pistol Data Maximum Loads case: Remington; barrel length: 5"; twist: 1:16"; trim length: .895"; primer: CCI 500; bullet diam.: .355"; COL: 1.265"; NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
133 | Cast #358480 | 5.0 | 975 | sugg. start load; 16,900 cup | |
133 | Cast #358480 | 7.0 | 1237 | max load; 29,400 cup | |
Lyman Cast Bullet Handbook cases: Remington; trim-to length: .895"; primers: Winchester 1 1/2-108; primer size: Small Pistol; Lyman shell holder: No. 12; cast bullets used size to .355" dia.; firearm used: Universal Receiver; barrel length: 5"; twist: 1-16"; groove diameter: .355". NOTE: More Lyman cast bullet data available under .38 Super Automatic Cast Bullet Handgun Data Lyman Reloading Handbook 49th Edition | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
115 | Hornady FMJ RN or HP XTP | 6.4 | 1216 | ||
115 | Hornady FMJ RN or HP XTP | 6.7 | 1250 | ||
115 | Hornady FMJ RN or HP XTP | 7.1 | 1292 | ||
115 | Hornady FMJ RN or HP XTP | 7.5 | 1334 | ||
115 | Hornady FMJ RN or HP XTP | 7.9 | 1368 | maximum load | |
Using 115 GR Hornady Bullets Gun: Kimber Model 1911; barrel length: 5 inches; case: Starline; primer: Winchester Small Pistol; bullet diameter: .355" and .357"; COAL: 1.245"; maximum COAL: 1.280"; maximum case length: .900"; trim to length: .895". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
125 | Hornady | 5.7 | 1051 | ||
125 | Hornady | 6.1 | 1106 | ||
125 | Hornady | 6.5 | 1173 | ||
125 | Hornady | 6.8 | 1240 | ||
125 | Hornady | 7.2 | 1295 | maximum load | |
Using 121/124/125 GR Hornady Bullets Gun: Kimber Model 1911; barrel length: 5 inches; case: Starline; primer: Winchester Small Pistol; bullet diameter: .355" and .357"; 121 GR Hornady HAP COAL: 1.210"; 124 GR FMJ-RN COAL: 1.250", 124 GR HP XTP COAL: 1.210"; 124 GR FMJ-FP COAL: 1.200"; 125 GR HAP COAL: 1.210"; 125 GR FP XTP & HP XTP COAL: 1.200"; maximum COAL: 1.280"; maximum case length: .900"; trim to length: .895". NOTE: 121 GR and 124 GR bullets can be used for all 125 GR data listed. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
95 | Barnes TAC-XP | 8.0 | 1505 | overall loaded length (inches): 1.255 | |
95 | Barnes TAC-XP | 8.5 | 1579 | overall loaded length (inches): 1.255 | |
95 | Barnes TAC-XP | 8.7 | 1609 | compressed; overall loaded length (inches): 1.255 | |
124 | Speer GDHP | 5.5 | 1110 | overall loaded length (inches): 1.260 | |
124 | Speer GDHP | 6.0 | 1164 | overall loaded length (inches): 1.260 | |
124 | Speer GDHP | 6.5 | 1222 | overall loaded length (inches): 1.260 | |
124 | Speer GDHP | 7.0 | 1269 | overall loaded length (inches): 1.260 | |
124 | Speer GDHP | 7.3 | 1303 | overall loaded length (inches): 1.260 | |
+P A Kimber Stainless Target II with a 5-inch barrel was used to test fire these loads. Starline cases and Winchester Small Pistol primers were used throughout. Bullet diameter: .355 and .356 inch; maximum overall loaded length: 1.280 inches; maximum case length: .900 inch; and trim-to length; .895 inch. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
90 | Cast #356242 | 5.9 | 1089 | sugg. start load; 19,700 cup; 1.175" OAL | |
90 | Cast #356242 | 7.1 | 1263 | max load; 30,300 cup; 1.175" OAL | |
158 | Cast #358311 | 4.9 | 927 | sugg. start load; 18,900 cup; 1.245" OAL | |
158 | Cast #358311 | 5.8 | 1085 | max load; 29,800 cup; 1.245" OAL | |
Cast Bullet Handgun Data Lyman Reloading Handbook 49th Edition cases: Remington; trim-to length: .895"; primers: Winchester WSP; primer size: Small Pistol; Lyman shell holder: No. 12; cast bullets used sized to .355" dia.; firearm used: Universal Receiver; barrel length: 5"; twist: 1-16"; groove dia.: .355" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
124 | Hornady FMJ/FP | 4.7 | 737 | sugg. start load; 12,900 cup; 1.165" OAL | |
124 | Hornady FMJ/FP | 5.9 | 1156 | max load; 31,000 cup; 1.165" OAL | |
147 | Speer TMJ | 5.0 | 895 | sugg. start load; 16,300 cup; 1.280" OAL | |
147 | Speer TMJ | 5.8 | 1086 | max load; 27,600 cup; 1.280" OAL | |
Handgun Data Lyman Reloading Handbook 49th Edition cases: Remington; trim-to length: .895"; primers: CCI 500; primer size: Small Pistol; Lyman shell holder: No. 12; firearm used: Universal Receiver; barrel length: 5"; twist: 1-16"; groove dia.: .355" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
125 | Hornady Flat Point | 7.6 | 1,282 | ME, fp: 455; velocity var. fps: 58; group average, inches: 3.30; most powerful tested | |
in a Browning BDA All loads utilize Federal 100 primers and Winchester brass. Loads chronographed in a Browning BDA, 4.4-inch barrel; Oehler Model 32/61 Chronotach/Skyscreen system. Average temperature 85 degrees. All loads maximum except where noted. DO NOT EXCEED! Work up carefully from one grain below. These loads are definitely not intended for old (pre-1929) Colt automatics. All bullet diameters: .357. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
180 | MG 180 | 10.0 | 1,050 | ||
190 | SAECO 190 | 9.0 | 925 | ||
175 | Lyman 401638 HP | 9.0 | 852 | group (inches): 2.5 | |
184 | AA 301 184 | 9.0 | 959 | group (inches): 2.0 | |
200 | HN 200 XTP | 9.0 | 861 | ||
180 | SP Gold Dot 180 | 10.0 | 1,037 | ||
180 | SP Gold Dot 180 | 9.0 | 858 | group (inches): 2.5 | |
Colt Peacemaker Loads All loads fired in Winchester .38 WCF brass with CCI 300 primers except where otherwise noted in remarks. SC = 3.5 inches or more. (Loading the Peacemaker - Dave Scovill) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
175 | Carroll (sized .400 inch) | 10.0 | 1,105 | OAL: 1.57 inches; case expansion: near maximum; accurate | |
175 | Carroll (sized .400 inch) | 10.5 | 1,147 | OAL: 1.57 inches; case expansion: maximum; accurate | |
Ruger Instrumental from Ruger-Buckeye Blackhawk with 6.5-inch barrel. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
155 | Hornady HP-XTP | 9.2 | 723 | maximum load | |
180 | Hornady HP-XTP | 8.8 | 751 | maximum load | |
200 | Hornady HP-XTP | 9.0 | 700 | ||
Revolver Using Hornady Bullets Gun: USFA Single Action Army Pre-War; barrel length: 5 1/2 inches; case: Starline; primer: Winchester Large Pistol; bullet diameter: .400"; 155, 180 & 200 GR HP-XTP COAL: 1.590"; 180 GR Oregon Trail Laser Cast RNFP & RCBS 40-180-CM COAL: 1.575"; maximum COAL: 1.590"; maximum case length: 1.305"; trim to length: 1.295". |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
92 | Cast #358242 | 2.8 | 653 | sugg. start load; case: Federal; 6,900 cup | |
92 | Cast #358242 | 4.1 | 970 | max load; case: Federal; 15,600 cup | |
121 | Cast #358242 | 2.3 | 662 | sugg. start load; case: Federal; 7,800 cup | |
121 | Cast #358242 | 3.5 | 927 | max load; 15,800 cup; case: Federal | |
Lyman Cast Bullet Handbook 3rd Edition case: Super Vel (except where otherwise specified in remarks); trim-to length: .677"; primers; Winchester 1 1/2-108; primer size: Small Pistol; Lyman shell holder: No. 26; cast bullets used sized to .355" dia.; firearm used: Universal Receiver; barrel length: 3 3/4"; twist: 1-16"; groove diameter: .355"; bullets: cast #358242 (#2 Alloy) .980" OAL | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
90 | Cast Lyman #356242 (sized to .355" dia) | 2.8 | 633 | sugg start load; 6,900 cup; .980" OAL | |
90 | Cast Lyman #356242 (sized to .355" dia) | 4.1 | 970 | max load; 15,600 cup; .980" OAL | |
120 | Cast Lyman #356242 (sized to .355" dia) | 2.3 | 662 | sugg start load; 7,800 cup; .980" OAL | |
120 | Cast Lyman #356242 (sized to .355" dia) | 3.5 | 927 | max load; 15,800 cup; .980" OAL | |
Lyman Reloading Handbook 49th Edition cases: Federal; trim-to length: .677"; primers: Federal 100 and Winchester WSP; primer size: small pistol; Lyman shell holder: No. 26; firearm used: Universal Receiver; barrel length: 3 3/4"; twist: 1-16"; groove dia.: .355" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
90 | Hornady HP | 3.6 | 880 | COL: .970"; 15,500 cup | |
100 | Hornady FMJ | 3.5 | 875 | COL: .980"; 15,900 cup | |
IMR Pistol Data Maximum Loads case: Remington; barrel length: 3.75"; twist: 1:16"; trim length: .675"; primer: CCI 500; bullet diam.: .355"; NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
115 | Nosler Sporting Handgun Jacketed Hollow Point | 3.3 | 748 | maximum load; compressed load; most accurate load tested; most accurate powder tested | |
115 | Nosler Sporting Handgun Jacketed Hollow Point | 2.8 | 643 | most accurate powder tested | |
115 | Nosler Sporting Handgun Jacketed Hollow Point | 2.3 | 538 | most accurate powder tested | |
Using Nosler Bullets Case: Remington; primer: WSP; barrel length/make: 2 1/4" Colt Mk. IV; twist: 1-16"; bullets: 115 GR Sporting Handgun Pistol JHP; OACL: .975"; maximum OACL: .984". Use Maximum Loads with Caution | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
90 | Jacketed | 3.5 | 856 | start load; min OAL: 0.970 | |
90 | Jacketed | 3.6 | 880 | never exceed; min OAL: 0.970; 15,500 cup | |
100 | Jacketed | 3.3 | 827 | start load; min OAL: 0.980 | |
100 | Jacketed | 3.5 | 875 | never exceed; min OAL: 0.980; 15,900 cup | |
Lee Precision Data CAUTION: With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. Small Pistol Primer. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
140 | Barnes TAC-XP | 6.5 | 1095 | start load; COL: 1.135"; 28,300 psi | |
140 | Barnes TAC-XP | 7.0 | 1166 | max load; COL: 1.135"; 31,700 psi | |
150 | Nosler JHP | 7.8 | 1189 | start load; COL: 1.125"; 28,700 psi | |
150 | Nosler JHP | 8.3 | 1248 | max load; COL: 1.125"; 32,500 psi | |
155 | Hornady XTP | 7.9 | 1139 | start load; COL: 1.125"; 25,900 psi | |
155 | Hornady XTP | 8.4 | 1223 | max load; COL: 1.125"; 31,300 psi | |
155 | Berry's Bullets FP | 7.2 | 1147 | start load; COL: 1.125"; 29,700 psi | |
155 | Berry's Bullets FP | 8.0 | 1195 | max load; COL: 1.125"; 30,400 psi | |
165 | Sierra JHP | 7.2 | 1075 | start load; COL: 1.125"; 26,200 psi | |
165 | Sierra JHP | 7.9 | 1168 | max load; COL: 1.125"; 33,000 psi | |
165 | Berry's Bullets FP | 6.8 | 1083 | start load; COL: 1.125"; 29,100 psi | |
165 | Berry's Bullets FP | 7.8 | 1191 | max load; COL: 1.125"; 33,100 psi | |
180 | Berry's Bullets FP | 6.2 | 999 | start load; COL: 1.125"; 28,400 psi | |
180 | Berry's Bullets FP | 6.7 | 1063 | max load; COL: 1.125"; 32,500 psi | |
180 | Hornady XTP | 6.1 | 957 | start load; COL: 1.125"; 25,200 psi | |
180 | Hornady XTP | 6.6 | 1018 | max load; COL: 1.125"; 28,800 psi | |
200 | Hornady XTP | 5.1 | 849 | start load; COL: 1.125"; 28,800 psi | |
200 | Hornady XTP | 5.5 | 910 | max load; COL: 1.125"; 32,900 psi | |
Hodgdon Data Case: Hornady; twist: 1:16"; primer: Winchester SP, Small Pistol; barrel length: 4"; trim length: .845"; bullet diam.: .400". This data is intended for use in firearms with barrels which fully support the cartridge in the chamber. Use of this data in firearms which do not fully support the cartridge, such as Glock, may result in bulged cases, ruptured cases, case head separation, or other conditions which may result in damage to the firearm and/or result in injury or death of the shooter and/or bystanders. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
135 | Jacketed | 9.0 | 1285 | start load; compressed charge; min. OAL: 1.125 | |
135 | Jacketed | 9.0 | 1285 | NEVER EXCEED; compressed charge; min. OAL: 1.125; 30,000 psi | |
Lee Precision 135 GR Data Do not use reloads in Glock or similar guns with chambers that do not fully support the cartridge due to the intrusion of the feed ramp. CAUTION: With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. Small Pistol Primer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
150 | Jacketed | 7.3 | 1129 | start load; compressed charge; min. OAL: 1.125 | |
150 | Jacketed | 7.8 | 1195 | NEVER EXCEED; compressed charge; min. OAL: 1.125; 32,700 psi | |
Lee Precision 150 GR Data Do not use reloads in Glock or similar guns with chambers that do not fully support the cartridge due to the intrusion of the feed ramp. CAUTION: With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. Small Pistol Primer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
180 | Jacketed Bullet | 5.6 | 936 | start load; min. OAL: 1.125 | |
180 | Jacketed Bullet | 6.0 | 1000 | NEVER EXCEED; min. OAL: 1.125; 33,100 psi | |
Lee Precision 180 GR Data Do not use reloads in Glock or similar guns with chambers that do not fully support the cartridge due to the intrusion of the feed ramp. CAUTION: With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. Small Pistol Primer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
200 | Jacketed | 5.0 | 824 | start load; min. OAL: 1.125 | |
200 | Jacketed | 5.6 | 906 | NEVER EXCEED; min. OAL: 1.125; 34,200 psi | |
Lee Precision 200 GR Data Do not use reloads in Glock or similar guns with chambers that do not fully support the cartridge due to the intrusion of the feed ramp. CAUTION: With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. Small Pistol Primer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
155 | Hornady HP-XTP | 7.1 | 1113 | ||
155 | Hornady HP-XTP | 7.5 | 1162 | ||
155 | Hornady HP-XTP | 7.8 | 1214 | ||
155 | Hornady HP-XTP | 8.1 | 1268 | ||
155 | Hornady HP-XTP | 8.4 | 1314 | maximum load | |
180 | Hornady HAP or HP-XTP | 5.2 | 893 | ||
180 | Hornady HAP or HP-XTP | 5.7 | 956 | ||
180 | Hornady HAP or HP-XTP | 6.2 | 1017 | ||
180 | Hornady HAP or HP-XTP | 6.6 | 1077 | ||
180 | Hornady HAP or HP-XTP | 7.1 | 1138 | maximum load | |
200 | Hornady HAP or HP-XTP | 4.4 | 783 | ||
200 | Hornady HAP or HP-XTP | 4.7 | 824 | ||
200 | Hornady HAP or HP-XTP | 5.0 | 866 | ||
200 | Hornady HAP or HP-XTP | 5.3 | 904 | ||
200 | Hornady HAP or HP-XTP | 5.6 | 942 | maximum load | |
Using Hornady Bullets Gun: Glock Model 22; barrel length: 4.35 inches; case: Starline; primer: Winchester Small Pistol; bullet diameter: .400"; COAL: 1.125"; maximum COAL: 1.135"; maximum case length: .850"; trim to length: .845". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
135 | Sierra JHP | 7.2 | 1047 | ||
135 | Sierra JHP | 7.6 | 1081 | ||
135 | Sierra JHP | 7.9 | 1121 | ||
135 | Sierra JHP | 8.3 | 1161 | ||
135 | Sierra JHP | 8.6 | 1199 | ||
135 | Sierra JHP | 9.0 | 1239 | ||
135 | Sierra JHP | 9.3 | 1279 | ||
135 | Sierra JHP | 9.7 | 1312 | maximum load | |
150 | Sierra JHP | 6.3 | 937 | ||
150 | Sierra JHP | 6.7 | 987 | ||
150 | Sierra JHP | 7.0 | 1044 | ||
150 | Sierra JHP | 7.4 | 1102 | ||
150 | Sierra JHP | 7.8 | 1160 | ||
150 | Sierra JHP | 8.1 | 1217 | ||
150 | Sierra JHP | 8.5 | 1264 | maximum load | |
165 | Sierra JHP | 6.2 | 959 | ||
165 | Sierra JHP | 6.5 | 999 | ||
165 | Sierra JHP | 6.8 | 1045 | ||
165 | Sierra JHP | 7.1 | 1091 | ||
165 | Sierra JHP | 7.4 | 1137 | ||
165 | Sierra JHP | 7.7 | 1180 | maximum load | |
180 | Sierra JHP | 5.5 | 872 | ||
180 | Sierra JHP | 5.8 | 913 | ||
180 | Sierra JHP | 6.2 | 960 | ||
180 | Sierra JHP | 6.5 | 1007 | ||
180 | Sierra JHP | 6.9 | 1054 | ||
180 | Sierra JHP | 7.2 | 1098 | maximum load | |
Using Sierra Bullets Notes: Gun: Glock Model 22; barrel length: 4.35"; case: Starline; primer: Winchester Small Pistol; bullet diameter: .400"; 135 GR Sierra JHP COAL: 1.125"; 150 GR Sierra JHP COAL: 1.125"; 165 GR Sierra JHP COAL: 1.125"; 180 GR Sierra JHP COAL: 1.125"; maximum COAL: 1.135"; maximum case length: .850"; trim to length: .845". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
200 | Nosler Sporting Handgun Jacketed Hollow Point | 5.4 | 895 | maximum load | |
200 | Nosler Sporting Handgun Jacketed Hollow Point | 4.9 | 819 | most accurate load tested | |
200 | Nosler Sporting Handgun Jacketed Hollow Point | 4.4 | 743 | ||
Using Nosler Bullets Handgun; case: Winchester; primer: WSP; barrel length/make: 4" S&W; twist: 1-16"; bullets: 135 GR, 150 GR, 180 GR & 200 GR Nosler Sporting Handgun Pistol JHP; OACL: 1.125"; maximum OACL: 1.135". Use Maximum Loads with Caution | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
150 | Nosler JHP | 6.5 | 970 | overall loaded length (inches): 1.125 | |
150 | Nosler JHP | 7.0 | 1032 | overall loaded length (inches): 1.125 | |
150 | Nosler JHP | 7.5 | 1115 | overall loaded length (inches): 1.125 | |
150 | Nosler JHP | 8.0 | 1203 | overall loaded length (inches): 1.125 | |
150 | Nosler JHP | 8.5 | 1255 | overall loaded length (inches): 1.125 | |
155 | Barnes TAC-XP | 7.0 | 992 | overall loaded length (inches): 1.125 | |
155 | Barnes TAC-XP | 7.5 | 1044 | overall loaded length (inches): 1.125 | |
165 | Sierra JHP | 6.2 | 959 | overall loaded length (inches): 1.125 | |
165 | Sierra JHP | 6.5 | 999 | overall loaded length (inches): 1.125 | |
165 | Sierra JHP | 6.8 | 1045 | overall loaded length (inches): 1.125 | |
165 | Sierra JHP | 7.1 | 1091 | overall loaded length (inches): 1.125 | |
165 | Sierra JHP | 7.4 | 1137 | overall loaded length (inches): 1.125 | |
165 | Sierra JHP | 7.7 | 1180 | overall loaded length (inches): 1.125 | |
180 | Nosler JHP | 5.0 | 872 | overall loaded length (inches): 1.125 | |
180 | Nosler JHP | 5.5 | 936 | overall loaded length (inches): 1.125 | |
180 | Nosler JHP | 6.0 | 996 | overall loaded length (inches): 1.125 | |
180 | Nosler JHP | 6.5 | 1064 | overall loaded length (inches): 1.125 | |
180 | Nosler JHP | 7.0 | 1128 | overall loaded length (inches): 1.125 | |
Load Data A Glock Model 22 with a 4.35-inch barrel was used to test-fire all loads. Starline cases and Winchester Small Pistol primers were used throughout. Bullet diameter: .400 inch; maximum cartridge overall length: 1.135 inches; maximum case length: .850 inch; trim-to length: .845 inch. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
170 | Jacketed | 13.0 | 1485 | start load; compressed; min OAL: 1.575 | |
170 | Jacketed | 14.6 | 1650 | never exceed; compressed; min OAL: 1.575; 39,600 cup | |
210 | Jacketed | 11.3 | 1309 | start load; min OAL: 1.590 | |
210 | Jacketed | 12.8 | 1455 | never exceed; compressed; min OAL: 1.590; 39,700 cup | |
210 | Lead | 10.3 | 1267 | start load; min OAL: 1.590 | |
210 | Lead | 11.7 | 1420 | never exceed; min OAL: 1.590; 40,000 cup | |
Lee Precision Data CAUTION: With NEVER EXCEED LOADS; maintain Minimum Over All Length or longer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
212 | Cast #41028 | 8.8 | 1030 | sugg. start load; 21,700 cup | |
212 | Cast #41028 | 10.9 | 1221 | max load; 36,300 cup | |
215 | Cast #410610 gas check | 8.0 | 909 | sugg. start load; 17,100 cup | |
215 | Cast #410610 gas check | 10.8 | 1213 | max load; 36,000 cup | |
220 | Cast #410459 | 9.8 | 1061 | sugg. start load; 20,900 cup | |
220 | Cast #410459 | 11.6 | 1246 | max load; 33,800 cup; potentially most accurate load | |
240 | Cast #410426 | 8.7 | 1000 | sugg. start load; 23,900 cup | |
240 | Cast #410426 | 10.5 | 1159 | max load; 36,800 cup | |
Lyman Cast Bullet Handbook cases: Winchester; trim-to length: 1.285"; primers: Remington 2 1/2; primer size: Large Pistol; Lyman shell holder: No. 30; cast bullets used size to .410" dia.; firearm used: Universal Receiver and Special Vented Barrel; barrel length: 4"; twist: 1-18 3/4"; groove diameter: .409" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
210 | R-P Lead SWC | 10.0 | 1,154 | case: R-P; primer: R 2 1/2; O.A. Ctg. Lgt.: 1.61; case expansion: moderate | |
222 | Ohaus 41-210K SWC | 10.5 | 1,239 | case: R-P; primer: R 2 1/2; O.A. Ctg. Lgt.: 1.58; case expansion: normal; very accurate | |
210 | R-P JSP | 11.0 | 1,327 | case: R-P; primer: F 150; O.A. Ctg. Lgt.: 1.58; case expansion: moderate | |
200 | Speer JHP | 11.5 | 1,320 | case: R-P; primer: F 150; O.A. Ctg. Lgt.: 1.57; case expansion: near max.; very accurate | |
210 | Hornady JHP | 10.0 | 1,085 | case: R-P; primer: F 150; O.A. Ctg. Lgt.: 1.58; case expansion: moderate; accurate | |
170 | Sierra JHC | 12.5 | 1,437 | case: R-P; primer: F 150; O.A. Ctg. Lgt.: 1.575; case expansion: near max | |
200 | Harvey J-J | 12.0 | 1,315 | case: R-P; primer: CCI 350; O.A. Ctg. Lgt.: 1.62; case expansion: near max. | |
Pet Loads All loads chronographed from 6 1/2-inch barrel Ruger Blackhawk. Oehler Model 31 Chronotach, Oehler Model 51 Electronic screens, spaced 10 feet apart; I.V. = Instrumental Velocity at 10 feet from muzzle. Update: Alliant Powder Company does not recommend Blue Dot in the .41 Magnum for any bullet weights. Their new tests on recent powder samples have shown high pressure spikes that can damage personal property or injure you. For this reason we removed all Blue Dot data from .41 magnum tables. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
210 | Nosler Sporting Handgun Jacketed Hollow Point | 11.3 | 1,450 | maximum load | |
210 | Nosler Sporting Handgun Jacketed Hollow Point | 10.8 | 1,430 | ||
210 | Nosler Sporting Handgun Jacketed Hollow Point | 10.3 | 1,410 | most accurate load tested | |
Using Nosler Bullets Handgun; case: Federal; primer: Fed 150; barrel length/make: 10" Douglas; twist: 1-14"; bullets: 210 GR Sporting Handgun Revolver JHP; OACL: 1.585"; maximum OACL: 1.590". Use Maximum Loads with Caution |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
240 | Speer LSWC | 6.5 | 751 | start charge | |
240 | Speer LSWC | 7.5 | 923 | maximum charge | |
Speer Reloading Manual #14 max. case length: 1.285"; trim-to length: 1.275"; max cart. OAL: 1.610"; RCBS shell holder: #18; cart. case: Speer; primer: CCI 300 (except where otherwise specified in remarks); test firearm: Ruger Redhawk; barrel length: 7.5"; NOTE: The 225-grain SWC GC and 250-grain K bullets were cast in RCBS moulds; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
270 | H&G 326 | 10.5 | 1,120 | primer: CCI 300; energy (ft-lbs): 750 | |
270 | H&G 326 | 11.0 | 1,170 | primer: CCI 300; energy (ft-lbs): 820 | |
270 | H&G 326 | 11.5 | 1,200 | primer: CCI 300; energy (ft-lbs): 861 | |
270 | H&G 326 | 12.0 | 1,250 | primer: CCI 300; energy (ft-lbs): 936 | |
300 | H&G 328 | 9.0 | 970 | primer: CCI 300; energy (ft-lbs): 624 | |
300 | H&G 328 | 9.5 | 1,010 | primer: CCI 300; energy (ft-lbs): 678 | |
300 | H&G 328 | 10.0 | 1,060 | primer: CCI 300; energy (ft-lbs): 747 | |
300 | H&G 328 | 10.5 | 1,100 | primer: CCI 300; energy (ft-lbs): 804 | |
Heavy Cast Bullets | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
200 | LRNFP Cast | 7.0 | 797 | max load; COL: 1.570"; 10,700 cup | |
200 | Nosler JHP | 14.6 | 1475 | max load; bullet diam.: .429; COL: 1.600"; 39,800 cup | |
240 | Nosler JHP | 13.3 | 1260 | max load; bullet diam.: .429"; COL: 1.600"; 39,800 cup | |
Hodgdon Pistol Data - IMR Powder Case: Winchester; barrel length: 8.275"; twist: 1:20"; trim length: 1.280"; primer: Remington 2 1/2; bullet diam.: .430" (except where otherwise specified in remarks). NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
200 | Jacketed | 12.9 | 1315 | start load; min OAL: 1.610 | |
200 | Jacketed | 14.6 | 1475 | never exceed; min OAL: 1.610; 39,800 cup | |
225 | Jacketed | 12.9 | 1252 | start load; min OAL: 1.585 | |
225 | Jacketed | 14.5 | 1390 | never exceed; min OAL: 1.585; 39,600 cup | |
240 | Jacketed | 11.8 | 1123 | start load; min OAL: 1.590 | |
240 | Jacketed | 13.3 | 1260 | never exceed; min OAL: 1.590; 39,800 cup | |
240 | Lead | 11.8 | 1188 | start load; min OAL: 1.585 | |
240 | Lead | 13.3 | 1320 | never exceed; min OAL: 1.585; 39,700 cup | |
Lee Precision Data Large pistol primer. CAUTION: With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
280 | Swift A-Frame | 10.8 | 1168 | starting load | |
280 | Swift A-Frame | 11.6 | 1247 | maximum load | |
Swift Data bullet diameter: 0.430"; maximum cartridge OAL: 1.610"; maximum case length: 1.285"; trim length: 1.275"; case: Remington; primer: Remington 2 1/2; test barrel: Shilen; barrel length: 20"; barrel twist: 1-20"; loads less than minimum charges shown are not recommended; NEVER EXCEED MAXIMUM LOAD! | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
200 | Nosler Sporting Handgun Jacketed Hollow Point | 13.7 | 1,482 | maximum load; most accurate load tested | |
200 | Nosler Sporting Handgun Jacketed Hollow Point | 13.2 | 1,447 | ||
200 | Nosler Sporting Handgun Jacketed Hollow Point | 12.7 | 1,411 | ||
Using 200 GR Nosler Bullets Handgun; case: Winchester; primer: WLP; barrel length/make: 8.25" Douglas; twist: 1-20"; bullets: 200 GR Nosler Sporting Handgun Revolver JHP; OACL: 1.580"; maximum OACL: 1.610". Use Maximum Loads with Caution | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
210 | Cast #429215 gas check | 12.2 | 1036 | sugg. start load; 1.645" OAL; 24,900 cup | |
210 | Cast #429215 gas check | 15.2 | 1228 | max load; 1.645" OAL; 36,100 cup | |
255 | Cast #429244 gas check | 10.5 | 892 | sugg. start load; 1.680" OAL; 21,500 cup | |
255 | Cast #429244 gas check | 12.2 | 1119 | max load; 1.680" OAL; 35,300 cup | |
300 | Cast #429650 gas check | 8.5 | 796 | sugg. start load; 1.700" OAL; 24,800 cup | |
300 | Cast #429650 gas check | 10.0 | 907 | max load; 1.700" OAL; 34,900 cup | |
Cast Bullet Handgun Data Lyman Reloading Handbook 49th Edition cases: Remington; trim-to length: 1.275"; primers: CCI 300 (except where otherwise specified in remarks); primer size: Large Pistol, Std. & Magnum; Lyman shell holder: No. 7; cast bullets used sized to .429" dia.; firearm used: Universal Receiver; barrel length: 4"; twist: 1-20"; groove dia.: .429" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
180 | Sierra Jacketed HC | 11.4 | 970 | sugg. start load; 17,400 cup | |
180 | Sierra Jacketed HC | 13.9 | 1262 | max load; 34,400 cup | |
200 | Hornady Jacketed HP | 11.0 | 894 | sugg. start load; 18,500 cup | |
200 | Hornady Jacketed HP | 13.6 | 1164 | max load; 36,300 cup | |
225 | Speer Jacketed HP | 10.2 | 865 | sugg. start load; 20,800 cup | |
225 | Speer Jacketed HP | 12.6 | 1123 | max load; 36,500 cup | |
240 | Sierra Jacketed HC | 9.9 | 854 | sugg. start load; 23,700 cup | |
240 | Sierra Jacketed HC | 12.3 | 1072 | max load; 35,800 cup | |
Handgun Lyman Reloading Handbook 49th Edition cases: Remington; trim-to length: 1.275"; primers: CCI 300 (except where otherwise specified in remarks); primer size: Large Pistol, Std. & Magnum; Lyman shell holder: No. 7; firearm used: Universal Receiver; barrel length: 4"; twist: 1-20"; groove dia.: .429"; 1.610" OAL (except where otherwise specified in remarks) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
240 | Hornady Lead SWC | 10.8 | 1,135 | primer: Federal 150; considerable leading | |
in a 5-Inch Super Blackhawk All loads in Remington brass. Velocities taken on an Oehler Model 32 Chronotach with Model 61 Skyscreens; 10 feet instrumental converted to muzzle velocity. Average temperature, 44 degrees. Test gun was a Mag-na-port Mark V (modified Super Blackhawk) with 5-inch barrel. Group Avg. = average of three 5-shot groups, 25 yards, arm rest. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
180 | Cast #429348 | 11.9 | 1096 | sugg. start load; 1.420" OAL; 23,300 cup | |
180 | Cast #429348 | 15.8 | 1359 | max load; 1.420" OAL; 36,900 cup | |
200 | Cast #429303 gas check | 12.3 | 1043 | sugg. start load; 1.692" OAL; 22,600 cup | |
200 | Cast #429303 gas check | 15.5 | 1289 | max load; 1.692" OAL; 36,700 cup | |
215 | Cast #429215 gas check | 12.2 | 1036 | sugg. start load; 1.645" OAL; 24,900 cup | |
215 | Cast #429215 gas check | 15.2 | 1228 | max load; 1.645" OAL; 36,100 cup | |
232 | Cast #429360 | 9.9 | 887 | sugg. start load; 1.655" OAL; 16,000 cup | |
232 | Cast #429360 | 13.3 | 1145 | max load; 1.655" OAL; 36,100 cup | |
245 | Cast #429421 | 11.4 | 927 | sugg. start load; 1.710" OAL; 20,500 cup | |
245 | Cast #429421 | 13.1 | 1125 | max load; 1.710" OAL; 36,500 cup | |
245 | Cast #429244 gas check | 10.5 | 892 | sugg. start load; 1.680" OAL; 21,500 cup | |
245 | Cast #429244 gas check | 12.2 | 1119 | max load; 1.680" OAL; 35,300 cup | |
Pistol Data Lyman Cast Bullet Handbook cases: Remington; trim-to length: 1.280"; primers: CCI 300; primer size: Large Pistol; Lyman shell holder: No. 7; cast bullets used size to .429" dia.; firearm used: Universal Receiver and Special Vented Barrel; barrel length: 4"; twist: 1-20"; groove diameter: .429". Cast bullet #'s 429303, 429215, 429360, 429244, 429421 list overall lengths that exceed the maximum of 1.610" and are suitable only for the Thompson/Center Contender or similar firearms that will accept cartridges of these dimensions. The data listed for these bullets take this extra length into consideration. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
240 | Hornady SWC-HP or SWC | 7.0 | 591 | ||
240 | Hornady SWC-HP or SWC | 7.4 | 685 | ||
240 | Hornady SWC-HP or SWC | 7.9 | 794 | ||
240 | Hornady SWC-HP or SWC | 8.3 | 903 | ||
240 | Hornady SWC-HP or SWC | 8.8 | 1005 | maximum load | |
Using 240 GR Hornady Bullets Gun: Ruger New Model Blackhawk (Bisley); barrel length: 5 1/2-inches; case: Starline; primer: Winchester Large Pistol; bullet diameter: .430"; Hornady HP-XTP and CL-SIL COAL: 1.600"; SWC-HP and SWC COAL: 1.610"; maximum COAL: 1.610"; maximum case length: 1.285"; trim to length: 1.275". |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
190 | Bull-X SWC | 6.3 | 678 | OAL: 1.29 inches; moderate pressure | |
190 | Bull-X SWC | 7.0 | 725 | OAL: 1.29 inches; normal pressure; tied for best accuracy at short range | |
215 | Bull-X SWC | 6.8 | 742 | OAL: 1.31 inches; moderate pressure; 6th best accuracy | |
240 | Bull-X SWC | 7.0 | 783 | OAL: 1.31 inches; maximum pressure; most accurate and best all-around load | |
240 | Lyman 429421 HP | 7.0 | 819 | OAL: 1.31 inches; maximum pressure | |
240 | Rainier TCJ | 6.8 | 703 | OAL: 1.29 inches; near maximum pressure; good load | |
240 | Rainier TCJ | 7.0 | 750 | OAL: 1.29 inches; maximum pressure; very accurate | |
The test gun was a Colt Single Action Army .44 Special with a 7 1/2-inch barrel. All test loads used Remington cases and Remington 2 1/2 primers. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
245 | Lyman 429383 RN | 6.0 | 824 | maximum; modern guns only | |
Test gun was a Colt New Frontier with a 7 1/2-inch barrel. Starline cases and Federal 150 Large Pistol primers used throughout. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
238 | Lyman 429421 | 10.0 | 953 | case expansion maximum; poor accuracy | |
230 | Taurus SWC HP | 10.0 | 991 | case expansion maximum; uniform velocities | |
240 | Taurus SWC | 10.0 | 954 | case expansion maximum; bullets sized to 0.4275 inch; very accurate | |
240 | Hornady SWC | 9.0 | 866 | case expansion near maximum | |
180 | Sierra HP | 12.0 | 1,173 | case expansion maximum; high velocity; accurate; light recoil | |
200 | Speer HP | 9.5 | 833 | case expansion normal; good load in short barrels | |
200 | Speer HP | 11.0 | 1,083 | case expansion maximum | |
240 | Speer Magnum HP | 10.2 | 1,074 | case expansion maximum | |
240 | Sierra HP | 10.0 | 1,081 | case expansion near maximum; fifth-place accuracy; highest velocity with heavy bullets | |
Loads designated maximum or near maximum must not be used in old or light-frame revolvers! | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
240 | Hornady LSWC | 7.5 | 760 | bullet diam.: .430"; COL: 1.470"; 13,600 cup | |
246 | Rem LRN | 7.7 | 775 | bullet diam.: .431"; COL: 1.570"; 13,800 cup | |
IMR Pistol Data Maximum Loads case: Remington; barrel length: 6.5"; twist: 1:20"; trim length: 1.155"; primer: Remington 2 1/2; NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
250 | RCBS 44-250-KT | 7.5 | 923 | group (inches): 3.0 | |
250 | Lyman 424383 RN | 7.5 | 873 | group (inches): 3.0 | |
200 | MG 200 | 7.5 | 846 | group (inches): 3.0 | |
180 | Lyman 429348 WC | 7.5 | 917 | group (inches): 1.5 | |
190 | Bull-X 190 SWC | 7.5 | 851 | group (inches): 3.0 | |
Colt Peacemaker Loads SC = 3.5 inches or more (Loading the Peacemaker) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
185 | Cast LRNFP | 7.1 | 936 | start load; COL: 1.400"; 10,500 cup | |
185 | Cast LRNFP | 7.9 | 1050 | max load; COL: 1.400"; 14,000 cup | |
200 | Cast LRNFP | 7.0 | 838 | start load; COL: 1.450"; 8,800 cup | |
200 | Cast LRNFP | 8.2 | 1002 | max load; COL: 1.450"; 12,600 cup | |
200 | Nosler JHP | 7.4 | 855 | start load; COL: 1.460"; bullet diam.: .429"; 10,200 cup | |
200 | Nosler JHP | 8.2 | 951 | max load; COL: 1.460"; bullet diam.: .429"; 12,800 cup | |
220 | Berry's Bullets FP | 7.1 | 814 | start load; COL: 1.460"; 10,100 cup | |
220 | Berry's Bullets FP | 7.9 | 915 | max load; COL: 1.460"; 12,800 cup | |
240 | Cast LSWC | 6.6 | 813 | start load; COL: 1.450"; 10,200 cup | |
240 | Cast LSWC | 7.4 | 921 | max load; COL: 1.450"; 13,300 cup | |
Hodgdon Data Case: Starline; barrel length: 8"; twist: 1:20"; trim length: 1.155"; primer: Winchester LP; bullet diam. .430" (except where otherwise specified in remarks). NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
180 | Sierra hollow-point | 12.0 | 1,173 | case: W-W; primer: R 2 1/2; expansion: maximum; high velocity; accurate; light recoil | |
200 | Speer hollow-point | 9.5 | 833 | case: W-W; primer: R 2 1/2; expansion: normal; good load in short barrels | |
200 | Speer hollow-point | 11.0 | 1,083 | case: W-W; primer: R 2 1/2; expansion: maximum | |
240 | Speer magnum hollow-point | 10.2 | 1,074 | case: W-W; primer: R 2 1/2; expansion: maximum | |
240 | Sierra hollow-point | 10.0 | 1,081 | case: W-W; primer: R 2 1/2; expansion: near max; fifth-place accuracy; highest velocity with heavy bullets | |
Jacketed Bullets Loads designated maximum or near max must not be used in old or light-frame revolvers! | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
238 | Lyman 429421 | 10.0 | 953 | case: R-P; primer: R 2 1/2; expansion: maximum; poor accuracy | |
230 | Taurus semiwadcutter hollow-point | 10.0 | 991 | case: W-W; primer: R 2 1/2; expansion: maximum; uniform velocities | |
240 | Taurus semiwadcutter | 10.0 | 954 | case: W-W; primer: R 2 1/2; expansion: maximum; bullets sized to 0.4275 inch; very accurate | |
240 | Hornady semiwadcutter | 9.0 | 866 | case: R-P; primer: R 2 1/2; expansion: near max | |
Lead Bullets Loads designated maximum or near max must not be used in old or light-frame revolvers! | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
240 | Lead | 6.8 | 697 | start load; min OAL: 1.470 | |
240 | Lead | 7.5 | 760 | never exceed; min OAL: 1.470; 13,600 cup | |
246 | Lead | 6.9 | 698 | start load; min OAL: 1.570 | |
246 | Lead | 7.7 | 775 | never exceed; min OAL: 1.570; 13,800 cup | |
Lee Precision Data CAUTION: With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. Large Pistol Primer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
232 | Cast #429360 | 6.7 | 666 | sugg. start load; 9,800 cup | |
232 | Cast #429360 | 8.0 | 774 | max load; 13,400 cup | |
250 | Cast #429244 gas check | 6.2 | 584 | sugg. start load; 8,400 cup | |
250 | Cast #429244 gas check | 7.5 | 765 | max load; 14,000 cup | |
Lyman Cast Bullet Handbook cases: Winchester; trim-to length: 1.152"; primers: CCI 300; primer size: Large Pistol; Lyman shell holder: No. 7; cast bullets used size to .429" dia.; firearm used: Universal Receiver and Special Vented Barrel; barrel length: 4"; twist: 1-20"; groove diameter: .429". NOTE: More Lyman cast bullet data available under .44 Smith & Wesson Special / .44 S&W Cast Bullet Data Lyman Reloading Handbook 49th Edition. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
250 | Speer K | 7.3 | 917 | start charge | |
250 | Speer K | 8.0 | 1014 | maximum charge | |
Speer Reloading Manual #14 max. case length: 1.160"; trim-to length: 1.150"; max cart. OAL: 1.615"; RCBS shell holder: #18; cart. case: Remington; primer: CCI 300 (except where otherwise specified in remarks); test firearm: Cimarron SAA; barrel length: 5.5"; NOTE: The 200-grain FN & CM, the 225-grain SWC GC and the 250-grain K bullets were cast in RCBS moulds. RCBS crimp-on gas checks used for the 225-grain SWC GC bullets. Maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
180 | Hornady HP-XTP | 7.8 | 612 | ||
180 | Hornady HP-XTP | 8.2 | 691 | ||
180 | Hornady HP-XTP | 8.6 | 789 | ||
180 | Hornady HP-XTP | 9.0 | 882 | ||
180 | Hornady HP-XTP | 9.4 | 970 | maximum load | |
200 | Hornady HP-XTP | 6.7 | 506 | Do Not Reduce | |
200 | Hornady HP-XTP | 7.1 | 576 | ||
200 | Hornady HP-XTP | 7.4 | 663 | ||
200 | Hornady HP-XTP | 7.8 | 746 | ||
200 | Hornady HP-XTP | 8.1 | 829 | ||
200 | Hornady HP-XTP | 8.5 | 906 | maximum load | |
240 | Hornady HP-XTP or CL-SIL | 6.2 | 609 | Do Not Reduce | |
240 | Hornady HP-XTP or CL-SIL | 6.6 | 672 | ||
240 | Hornady HP-XTP or CL-SIL | 7.1 | 735 | ||
240 | Hornady HP-XTP or CL-SIL | 7.6 | 798 | maximum load | |
240 | Hornady SWC-HP or SWC | 6.3 | 602 | ||
240 | Hornady SWC-HP or SWC | 6.8 | 684 | ||
240 | Hornady SWC-HP or SWC | 7.2 | 766 | ||
240 | Hornady SWC-HP or SWC | 7.7 | 848 | maximum load | |
Using Hornady Bullets Gun: Smith & Wesson 624; barrel length: 4 inches; case: Starline; primer: Winchester Large Pistol; bullet diameter: 0.430"; 180 GR Hornady HP-XTP COAL: 1.480"; FP-Cowboy COAL: 1.490"; 200 GR HP-XTP COAL: 1.470"; 240 GR HP-XTP & CL-SIL COAL: 1.480"; 240 GR SWC-HP & SWC COAL: 1.490"; maximum COAL: 1.500"; maximum length: 1.160"; trim to length: 1.150". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
223 | Lyman 429215 | 9.0 | 1,030 | group size: 1.00; very accurate | |
223 | Lyman 429215 | 9.5 | 1,070 | group size: .94; most accurate | |
214 | Lyman 42798 | 9.5 | 1,060 | group size: 2.25; fair | |
214 | Lyman 42798 | 10.0 | group size: 3.25; poor | ||
185 | Lyman 429215 Special | 10.0 | group size: 2.25; fair | ||
185 | Lyman 429215 Special | 10.5 | 1,130 | group size: 5.50; very poor | |
with light cast bullets All loads used W-W brass and CCI standard primers. Chronographing done at five feet from handgun's muzzle. Some loads showing little or no promise were not chronographed, to save time and components. All group shooting was done at twenty-five yards using a Lee pistol machine rest. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
250 | Lyman 429421 Keith | 8.0 | 929 | extreme spread: 40 | |
250 | Lyman 429421 Keith | 8.5 | 989 | extreme spread: 38 | |
+P and Standard for F A Model 1997 Warning! All data is also safe for postwar Smith & Wesson N-Frame revolvers. Barrel length of Freedom Arms Model 1997 is 4 1/2. Winchester brass was used in all loads as were CCI 300 primers, except Federal 155s were used with loads containing H-110, H-4227 and IMR-4227 | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
240 | Cast #429667 | 7.4 | 724 | sugg. start load; 1.500" OAL; 9,200 cup | |
240 | Cast #429667 | 8.3 | 819 | max load; 1.500" OAL; 13,000 cup; potentially most accurate load | |
245 | Cast #429383 | 6.4 | 704 | sugg. start load; 1.570" OAL; 7 1/2" barrel; 8,300 cup | |
245 | Cast #429383 | 8.0 | 898 | max load; 1.570" OAL; 7 1/2" barrel; 14,000 cup | |
245 | Cast #429421 | 6.8 | 661 | sugg. start load; 1.570" OAL; 9,000 cup | |
245 | Cast #429421 | 8.1 | 780 | max load; 1.570" OAL; 13,800 cup | |
255 | Cast #429244 gas check | 6.2 | 584 | sugg. start load; 1.550" OAL; 8,400 cup | |
255 | Cast #429244 gas check | 7.5 | 765 | max load; 1.550" OAL; 14,000 cup | |
Cast Bullet Data Lyman Reloading Handbook 49th Edition cases: Winchester; trim-to length: 1.150"; primers: CCI 300; primer size: Large Pistol; Lyman shell holder: No. 7; firearm used: Universal Receiver; barrel length: 4" (except where otherwise noted in remarks); twist: 1-20"; groove dia.: .429" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
250 | Lyman/Keith 429421 (original) | 8.0 | 935 | overall loaded length (inches): 1.585 | |
in a Colt New Frontier SAA Colt New Frontier SAA, 7 1/2-inch barrel. All the loads listed are within SAAMI pressure guidelines of 15,500 psi. Starline cases and CCI 300 primers were used throughout. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
250 | Lyman 429421 Keith | 8.5 | 1,003 | ||
in a Colt SAA (22,000 psi or less) A Colt Single Action Army with 7 1/2-inch barrel used to test these loads. Winchester cases and CCI 300 primers used throughout, except Federal 155 Magnums used with IMR-4227 and H-4227 powders. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
250 | Lyman 429421 Keith | 8.0 | 929 | extreme spread (fps): 40 | |
in a Freedom Arms 1997 (15,500 psi or less) A Freedom Arms Model 1997 with a 4 1/4-inch barrel was used in all these loads. Winchester cases and CCI 300 primers used throughout. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
250 | Lyman 429421 Keith | 8.5 | 989 | extreme spread (fps): 38 | |
in a Freedom Arms Model 1997 (22,000 psi or less) A Freedom Arms Model 1997 with 4 1/4-inch barrel used to test fire these loads. Winchester cases and CCI 300 used in all loads, except Federal 155 Magnum used with IMR-4227 and H-4227 powders. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
254 | Lyman/Keith 429421 cast | 7.0 | 699 | overall loaded length (inches): 1.575 | |
254 | Lyman/Keith 429421 cast | 7.5 | 741 | overall loaded length (inches): 1.575 | |
254 | Lyman/Keith 429421 cast | 8.0 | 803 | overall loaded length (inches): 1.575 | |
in a Model 396 (Standard Pressure 15,500 psi) A 3 1/8-inch barreled Smith & Wesson Model 396 Mountain Lite AirLite Ti was used to test fire these loads. Starline cases and CCI 300 Large Pistol primers were used throughout. Maximum case length: 1.160 inches; trim-to length: 1.150 inches. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
250 | Lyman/Keith 429421 (original) | 8.0 | 919 | overall loaded length (inches): 1.585 | |
in a Smith & Wesson Model 1950 Smith & Wesson Model 1950 Target (original), 4-inch barrel. All the loads listed are within SAAMI pressure guidelines of 15,500 psi. Starline cases and CCI 300 primers were used throughout. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
250 | Lyman/Keith 429421 (original) | 8.0 | 930 | overall loaded length (inches): 1.585 | |
in a USFA Colt USFA Colt Pattern Custom Keith No. 5, 5 1/2-inch barrel. All the loads listed are within SAAMI pressure guidelines of 15,500 psi. Starline cases and CCI 300 primers were used throughout. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
250 | Lyman 429421 Keith | 7.5 | 856 | extreme spread (fps): 25 | |
250 | Lyman 429421 Keith | 8.0 | 932 | extreme spread (fps): 27 | |
in an S&W New Century (15,500 psi or less) A Smith & Wesson New Century (Triple Lock) Target revolver with a 6 1/2-inch barrel was used to fire these loads. Winchester cases and CCI 300 primers used throughout. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
250 | Lyman 429421 semiwadcutter | 7.5 | 856 | ||
250 | Lyman 429421 semiwadcutter | 8.0 | 932 | ||
New Century Test gun was a Smith & Wesson New Century Target with a 6 1/2-inch barrel. Winchester cases and CCI 300 primers used throughout. Temperature during testing was 55 degrees Fahrenheit. All data has been tested in laboratories and is within SAAMI maximum pressure limits of 15,500 psi. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
200 | H&G 241 SWC | 10.5 | 1,390 | muzzle energy: 858 ft-lbs; maximum; most powerful load; very accurate | |
cast bullets Pistol: Colt New Frontier 7 1/2-inch barrel. Primer: CCI 300. Case: W-W. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
200 | Speer 200 HP | 9.0 | 782 | group (inches): SC | |
200 | Nosler 200 HP | 9.0 | 766 | group (inches): 2.5 | |
210 | Sierra 210 JHC | 9.0 | 799 | group (inches): 2.25 | |
200 | RCBS 44-200-FN | 9.0 | 843 | group (inches): 2.5 | |
200 | MG 44-200 | 9.0 | 836 | group (inches): 1.5 | |
200 | SAECO 200 | 9.0 | 962 | group (inches): 2.0 | |
190 | Bull-X 190 SWC | 9.0 | 883 | group (inches): 2.0 | |
Colt Peacemaker Loads SC = 3.5 inches or more (Loading the Peacemaker - Dave Scovill) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
200 | Cast LRNFP | 8.4 | 821 | starting load; 6,700 cup | |
200 | Cast LRNFP | 9.3 | 913 | maximum load; 11,200 cup | |
Hodgdon Pistol Data case: Winchester; barrel length: 6"; twist: 1:36"; trim length: 1.295"; primer: Winchester LP; bullet diam.: .430"; COL: 1.600"; NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
200 | Speer JHP | 10.5 | 1,360 | muzzle energy: 820 ft-lbs; excellent accuracy | |
200 | Hornady JHP | 10.5 | 1,350 | muzzle energy: 808 ft-lbs; most accurate jacketed bullet load | |
Jacketed Bullet | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
200 | Speer Jacketed HP | 8.6 | 746 | sugg. start load; 1.592" OAL; 11,100 cup | |
200 | Speer Jacketed HP | 9.6 | 868 | max load; 1.592" OAL; 12,300 cup | |
200 | Cast #427666 | 7.5 | 727 | sugg. start load; 1.580" OAL; 5,900 cup | |
200 | Cast #427666 | 9.4 | 988 | max load; 1.580" OAL; 12,300 cup | |
205 | Cast #427098 | 7.4 | 773 | sugg. start load; 1.592" OAL; 5,700 cup | |
205 | Cast #427098 | 9.3 | 961 | max load; 1.592" OAL; 12,400 cup | |
Handgun Lyman Reloading Manual 49th Edition cases: Winchester; trim-to length: 1.295"; primers: Winchester WLP; primer size: Large Pistol; Lyman shell holder: No. 14B; cast bullets used sized to .429" dia.; firearm used: Universal Receiver; barrel length: 6"; twist: 1-20"; groove dia.: .428" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
200 | Lyman 42798 | 7.5 | 779 | 25-yard group (inches): 1.80 | |
200 | Laser-Cast RN FP BB .427 | 8.0 | 718 | 25-yard group (inches): 1.46 | |
in a Colt Lightning | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
200 | Hornady HP-XTP | 8.8 | 645 | ||
200 | Hornady HP-XTP | 9.4 | 722 | ||
200 | Hornady HP-XTP | 10.1 | 799 | ||
200 | Hornady HP-XTP | 10.4 | 875 | maximum load | |
Revolver Using Hornady Bullets Gun: Colt Frontier Six-Shooter; barrel length: 4 3/4-inches; case: Starline; primer: Federal #150; bullet diameter for the 205 GR FP Cowboy: .427" bullet diameter for the 200 GR HP-XTP: .430"; HP-XTP COAL: 1.600"; FP Cowboy COAL: 1.570"; maximum COAL: 1.592"; maximum case length: 1.305"; trim to length: 1.295". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
210 | Lyman 42798 | 7.5 | 578 | OAL: 1.58 inches; group (inches): 3.38 | |
210 | Lyman 42798 | 8.0 | 650 | OAL: 1.58 inches; group (inches): 3.00 | |
210 | Lyman 42798 | 8.5 | 664 | OAL: 1.58 inches; group (inches): 1.50 | |
210 | Lyman 42798 | 9.0 | 830 | OAL: 1.58 inches; group (inches): 3.00 | |
210 | Lyman 42798 | 9.5 | 902 | OAL: 1.58 inches; group (inches): 3.75 | |
210 | NEI 205-429PB | 7.5 | 594 | OAL: 1.65 inches; group (inches): 2.06 | |
210 | NEI 205-429PB | 8.0 | 629 | OAL: 1.65 inches; group (inches): 2.75 | |
210 | NEI 205-429PB | 8.5 | 676 | OAL: 1.65 inches; group (inches): 1.88 | |
210 | NEI 205-429PB | 9.0 | 723 | OAL: 1.65 inches; group (inches): 4.19 | |
210 | NEI 205-429PB | 9.5 | 792 | OAL: 1.65 inches; group (inches): 4.00 | |
216 | P&C 44-215CP | 9.0 | 825 | OAL: 1.59 inches; group (inches): 3.00 | |
216 | P&C 44-215CP | 9.5 | 852 | OAL: 1.59 inches; group (inches): 2.75 | |
216 | P&C 44-215SWC | 7.0 | 575 | OAL: 1.63 inches; group (inches): 3.00 | |
216 | P&C 44-215SWC | 7.5 | 624 | OAL: 1.63 inches; group (inches): 3.13 | |
216 | P&C 44-215SWC | 8.0 | 692 | OAL: 1.63 inches; group (inches): 3.31 | |
216 | P&C 44-215SWC | 9.0 | 765 | OAL: 1.63 inches; group (inches): 3.00 | |
216 | P&C 44-215SWC | 9.5 | 859 | OAL: 1.63 inches; group (inches): 3.00 | |
220 | Lyman 429215 | 7.5 | 586 | OAL: 1.65 inches; group (inches): 2.75 | |
220 | Lyman 429215 | 8.0 | 632 | OAL: 1.65 inches; group (inches): 1.38 | |
220 | Lyman 429215 | 8.5 | 686 | OAL: 1.65 inches; group (inches): 4.00 | |
220 | Lyman 429215 | 9.0 | 744 | OAL: 1.65 inches; group (inches): 2.00 | |
220 | Lyman 429215 | 9.5 | 793 | OAL: 1.65 inches; group (inches): 3.00 | |
Revolver in a 4 3/4-inch Barrel All loads used Winchester brass and Winchester Large Pistol primers. All groups fired at 25 yards with gun mounted in Lee (now Mequon) Pistol Machine Rest. Average of 92 groups in Colt SAA 4 3/4-inch barrel - 3.10 inches. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
210 | Lyman 42798 | 9.0 | 946 | OAL: 1.58 inches; group (inches): 2.31 | |
210 | Lyman 42798 | 9.5 | 1,022 | OAL: 1.58 inches; group (inches): 2.88 | |
210 | NEI 205-429PB | 8.5 | 846 | OAL: 1.65 inches; group (inches): 2.75 | |
210 | NEI 205-429PB | 9.5 | 941 | OAL: 1.65 inches; group (inches): 5.56 | |
216 | P&C 44-215CP | 9.5 | 905 | OAL: 1.59 inches; group (inches): 5.88 (4 in 1.50) | |
216 | P&C 44-215SWC | 9.0 | 923 | OAL: 1.63 inches; group (inches): 2.13 | |
216 | P&C 44-215SWC | 9.5 | 976 | OAL: 1.63 inches; group (inches): 2.63 | |
220 | Lyman 429215 | 8.5 | 842 | OAL: 1.65 inches; group (inches): 4.25 | |
220 | Lyman 429215 | 9.5 | 950 | OAL: 1.65 inches; group (inches): 2.88 | |
Revolver in a 7 1/2-inch Barrel All loads used Winchester brass. All loads used Winchester Large Pistol primers unless otherwise noted. All groups fired at 25 yards with gun mounted in Lee (now Mequon) Pistol Machine Rest. Average of 52 groups in Colt SAA 7 1/2 barrel - 3.05 inches. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
185 | Sierra JHP | 9.5 | 1,034 | primer: F 150; O.A. Ctg. Lgt.: 1.18; case expansion maximum; second highest velocity; not for target pistol | |
200 | Speer JHP | 7.5 | 796 | primer: F 150; O.A. Ctg. Lgt.: 1.18; case expansion normal | |
200 | Speer JHP | 8.5 | 890 | primer: F 150; O.A. Ctg. Lgt.: 1.18; case expansion near maximum; maximum for target pistols | |
200 | Speer JHP | 9.0 | 945 | primer: F 150; O.A. Ctg. Lgt.: 1.18; case expansion maximum | |
JHP = jacketed hollowpoint; FMJ = full metal jacket; SWC = semiwadcutter; RNL = roundnose lead. Test Guns: Colt Gold Cup National Match and Colt service automatics. Ruger Convertible revolver with 4-5/8-inch barrel used for velocity comparisons. Federal cases used throughout tests. Velocities chronographed with Oehler Model 31 Chronotach and Model 51 electronic screens; velocities taken at ten feet; screen spacing, ten feet. Accuracy Goals: (five-shot groups - sandbag rest) - one inch at fifty feet; three to four inches at fifty yards. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
155 | Cast LSWC | 8.2 | 996 | start load; COL: 1.230"; 13,100 cup | |
155 | Cast LSWC | 8.8 | 1108 | max load; COL: 1.230"; 17,200 cup | |
160 | Barnes TAC-XP | 7.4 | 954 | start load; COL: 1.200"; 17,400 psi | |
160 | Barnes TAC-XP | 7.6 | 1032 | max load; COL: 1.200"; 19,100 psi | |
180 | LFP | 7.6 | 919 | start load; bullet diam.: .452"; COL: 1.140"; 12,900 cup | |
180 | LFP | 8.4 | 1047 | max load; bullet diam.: .452"; COL: 1.140"; 16,900 cup | |
185 | Hornady JSWC | 7.4 | 853 | start load; COL: 1.135"; 12,300 cup | |
185 | Hornady JSWC | 8.2 | 991 | max load COL: 1.135"; 16,700 cup | |
200 | Speer JHP | 7.0 | 842 | start load; COL: 1.155"; 11,100 cup | |
200 | Speer JHP | 7.6 | 941 | max load; COL: 1.155"; 14,200 cup | |
200 | Cast LSWC | 7.4 | 875 | start load; COL: 1.225"; 13,500 cup | |
200 | Cast LSWC | 8.2 | 966 | max load; COL: 1.225"; 17,100 cup | |
230 | LRN | 6.3 | 813 | start load; bullet diam.: .452"; COL: 1.200"; 14,200 cup | |
230 | LRN | 6.8 | 892 | max load; bullet diam.: .452"; COL: 1.200"; 16,400 cup | |
230 | Hornady FMJ FP | 6.4 | 762 | start load; COL: 1.200"; 12,900 cup | |
230 | Hornady FMJ FP | 7.0 | 867 | max load; COL: 1.200"; 16,500 cup | |
Hodgdon Data Case: Winchester; twist: 1:16"; primer: Federal 150, Large Pistol; barrel length: 5"; trim length: .893"; bullet diam.: .451" (except where otherwise specified in remarks) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
185 | Rem MC HP | 8.7 | 920 | COL: 1.210"; 17,900 cup | |
200 | Hornady LSWC | 8.2 | 930 | bullet diam.: .452"; COL: 1.170"; 17,900 cup | |
200 | Speer JHP | 8.1 | 880 | COL: 1.170"; 17,700 cup | |
230 | Rem LRN | 7.5 | 960 | COL: 1.270"; 17,800 cup | |
230 | Rem MC | 7.4 | 795 | COL: 1.260"; 17,600 cup | |
IMR Pistol Data Maximum Loads case: Remington; barrel length: 5"; twist: 1:16"; trim length: .893"; primer: Remington 2 1/2; bullet diam.: .451" (except where otherwise specified in remarks); NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
185 | Jacketed | 7.4 | 838 | start load; min OAL: 1.150 | |
185 | Jacketed | 8.4 | 940 | never exceed; min OAL: 1.150; 17,900 cup | |
200 | Jacketed | 7.2 | 792 | start load; min OAL: 1.170 | |
200 | Jacketed | 8.1 | 880 | never exceed; min OAL: 1.170; 17,700 cup | |
200 | Lead | 7.0 | 765 | start load; min OAL: 1.170 | |
200 | Lead | 8.2 | 930 | never exceed; min OAL: 1.170; 17,900 cup | |
230 | Jacketed | 6.7 | 724 | start load; min OAL: 1.260 | |
230 | Jacketed | 7.4 | 795 | never exceed; min OAL: 1.260; 17,600 cup | |
230 | Lead | 6.9 | 796 | start load; min OAL: 1.270 | |
230 | Lead | 7.5 | 860 | never exceed; load; min OAL: 1.270; 17,800 cup | |
Lee Precision Data Large Pistol primer; with NEVER EXCEED LOADS maintain Minimum Over All Length or longer (Modern Reloading - Second Edition - Richard Lee) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
185 | Cast #452389 | 5.3 | 663 | sugg. start load; 8,900 cup | |
185 | Cast #452389 | 7.9 | 988 | max load; 17,600 cup | |
195 | Cast #452488 | 5.3 | 639 | sugg. start load; 8,600 cup | |
195 | Cast #452488 | 7.8 | 977 | max load; 17,500 cup | |
Lyman Cast Bullet Handbook cases: Remington; trim-to length: .895"; primers: Remington 2 1/2; primer size: Large Pistol; Lyman shell holder: No. 2; cast bullets used size to .450" dia.; firearm used: Universal Receiver; barrel length: 5"; twist: 1-16"; groove diameter: .450". NOTE: More Lyman cast bullet data available under .45 ACP Cast Bullet Data Lyman Reloading Handbook 49th Edition | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
185 | Remington Jacketed SWC/FMJ | 5.7 | 666 | sugg. start load; 1.135" OAL; 7,900 cup | |
185 | Remington Jacketed SWC/FMJ | 7.7 | 1002 | max load; 1.135" OAL; 17,000 cup | |
200 | Speer Gold Dot Jacketed HP | 5.4 | 588 | sugg. start load; 1.178" OAL; 7,100 cup | |
200 | Speer Gold Dot Jacketed HP | 7.4 | 961 | max load; 1.178" OAL; 18,000 cup | |
225 | Speer Jacketed HP | 4.8 | 552 | sugg. start load; 1.243" OAL; 6,700 cup | |
225 | Speer Jacketed HP | 7.3 | 882 | max load; 1.243" OAL; 17,300 cup | |
230 | Speer TMJ | 6.0 | 695 | sugg. start load; 1.275" OAL; 11,200 cup | |
230 | Speer TMJ | 7.0 | 866 | max load; 1.275" OAL; 17,400 cup | |
Lyman Reloading Handbook 49th Edition cases: Remington, Federal; trim-to length: .888"; primers: Remington 2 1/2; primer size: Large Pistol; Lyman shell holder: No. 2; firearm used: Universal Receiver; barrel length: 5"; twist: 1-16"; groove dia.: .450" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
200 | Speer Semi-wadcutter | 5.8 | 800 | maximum load | |
200 | Speer Semi-wadcutter | 5.3 | 728 | ||
230 | Speer RN | 6.5 | 848 | maximum load | |
230 | Speer RN | 6.0 | 783 | ||
185 | Speer TMJ Match | 6.9 | 789 | maximum load | |
185 | Speer TMJ Match | 6.3 | 678 | ||
200 | Speer TMJ Combat | 7.0 | 803 | maximum load; developed for target velocity rather than at maximum pressure | |
200 | Speer TMJ Combat | 6.5 | 715 | developed for target velocity rather than at maximum pressure | |
200 | Speer Hollow Point | 7.1 | 937 | maximum load | |
200 | Speer Hollow Point | 6.5 | 884 | ||
230 | Speer TMJ | 6.9 | 892 | maximum load | |
230 | Speer TMJ | 5.9 | 774 | ||
260 | Speer Hollow Point | 6.4 | 830 | maximum load | |
260 | Speer Hollow Point | 5.8 | 752 | ||
Speer Reloading Manual #11 gun: Colt Gov't. Model; barrel: 5"; twist: 1-16; cases: Speer; primers: CCI-300; maximum loads listed should be used with caution | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
200 | Speer LSWC | 5.3 | 728 | start charge | |
200 | Speer LSWC | 5.8 | 800 | maximum charge | |
230 | Speer LRN | 6.0 | 783 | start charge | |
230 | Speer LRN | 6.5 | 848 | maximum charge | |
Speer Reloading Manual #14 max. case length: 0.898"; trim-to length: 0.888"; max cart. OAL: 1.275"; RCBS shell holder: #3; cart. case: Speer; primer: CCI 300; test firearm: SIG P220; barrel length: 4.4"; IMPORTANT SAFETY NOTE: These loads were developed and tested for safe use in HANDGUNS. Not all loads may be suitable for use in a carbine or rifle chambered for this cartridge. If loading for a carbine or rifle, choose from among the loads developing the highest handgun velocities and load just a few rounds. Thoroughly test this small sample in your firearm in slow-fire mode, insuring that you achieve proper feeding and ejection. Be certain that all bullets exit the barrel; watching the target for each bullet strike is the best way to know that the load produces sufficient gas volume for a longer barrel. NOTE: Do not use the 230-GR TMJ RN loads with Gold Dot HP; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
185 | Hornady HP-XTP or FMJ SWC | 8.2 | 897 | ||
185 | Hornady HP-XTP or FMJ SWC | 8.4 | 932 | ||
185 | Hornady HP-XTP or FMJ SWC | 8.6 | 981 | ||
185 | Hornady HP-XTP or FMJ SWC | 8.8 | 1023 | ||
185 | Hornady HP-XTP or FMJ SWC | 9.1 | 1065 | maximum load | |
Using 185 GR Hornady Bullets Gun: Ruger SR1911; barrel length: 5 inches; case: Starline; primer: Winchester Large Pistol; bullet diameter: .451"; HP-XTP COAL: 1.225"; FMJ SWC COAL: 1.135"; maximum COAL: 1.275"; maximum case length: .898"; trim to length: .888". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
200 | Hornady HP-XTP | 7.5 | 840 | ||
200 | Hornady HP-XTP | 7.8 | 870 | ||
200 | Hornady HP-XTP | 8.0 | 900 | ||
200 | Hornady HP-XTP | 8.3 | 929 | maximum load | |
Using 200 GR Hornady Bullets Gun: Ruger SR1911; barrel length: 5 inches; case: Starline; primer: Winchester Large Pistol; bullet diameter: .451"; HP-XTP COAL: 1.230"; SWC COAL: 1.200"; L-C/T COAL: 1.225"; maximum COAL: 1.275"; maximum case length: .898"; trim to length: .888". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
230 | Hornady HP-XTP or HAP | 6.5 | 770 | ||
230 | Hornady HP-XTP or HAP | 6.7 | 807 | ||
230 | Hornady HP-XTP or HAP | 7.0 | 851 | ||
230 | Hornady HP-XTP or HAP | 7.3 | 896 | ||
230 | Hornady HP-XTP or HAP | 7.6 | 939 | maximum load | |
Using 230 GR Hornady Bullets Gun: Ruger SR1911; barrel length: 5 inches; case: Starline; primer: Winchester Large Pistol; bullet diameter: .451"; HP-XTP and HAP COAL: 1.230"; LRN COAL: 1.245"; maximum COAL: 1.275"; maximum case length: .898"; trim to length: .888". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
200 | Lyman #452460 | 5.3 | 704 | sugg. start load; 9,100 cup; case: Federal | |
200 | Lyman #452460 | 7.3 | 993 | max load; 17,000 cup; case: Federal | |
200 | Lyman #452630 | 6.4 | 660 | sugg. start load; 9,300 cup | |
200 | Lyman #452630 | 8.0 | 933 | max load; 16,700 cup | |
200 GR Lyman Cast Bullet Data cases: Remington (except where otherwise specified in remarks); trim-to length: .888"; primers: Remington 2 1/2 (except where otherwise specified in remarks); primer size: Large Pistol; Lyman shell holder: No. 2; cast bullets used sized to .451" dia.; firearm used; Universal Receiver; barrel length: 5"; twist: 1-16"; groove dia.: .450"; Lyman #452460 OAL: 1.161"; Lyman #452630 OAL: 1.235" (Lyman Cast Bullet Manual 4th Edition) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
225 | Lyman #452374 | 5.5 | 662 | sugg. start load; 8,800 cup | |
225 | Lyman #452374 | 7.5 | 955 | max load; 18,000 cup | |
225 GR Lyman Cast Bullet Data cases: Remington (except where otherwise specified in remarks); trim-to length: .888"; primers: Remington 2 1/2 (except where otherwise specified in remarks); primer size: Large Pistol; Lyman shell holder: No. 2; cast bullets used sized to .451" dia.; firearm used; Universal Receiver; barrel length: 5"; twist: 1-16"; groove dia.: .450"; OAL: 1.272" (Lyman Cast Bullet Manual 4th Edition) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
193 | Metallic #68 SWC | 7.0 | 760 | case: W-W; primer: WLP; normal | |
225 | Carroll FN | 7.3 | 816 | case: Speer; primer: WLP; near max | |
230 | Bull-X FN | 7.0 | 733 | case: W-W; primer: WLP; normal; very accurate | |
Cast Bullets 5" barrel. Test gun was Colt Double Eagle with five-inch barrel. All groups five shots each from sandbag rest; 20-yard indoor range. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
200 | Cast #452460 | 5.3 | 704 | sugg. start load; 1.161" OAL; case: Federal 9,100 cup | |
200 | Cast #452460 | 7.3 | 993 | max load; 1.161" OAL; case: Federal; 17,000 cup | |
200 | Cast #452630 | 6.4 | 660 | sugg. start load; 1.235" OAL; 9,300 cup | |
200 | Cast #452630 | 8.0 | 933 | max load; 1.235" OAL; 16,700 cup | |
225 | Cast #452374 | 5.5 | 662 | sugg. start load; 1.272" OAL; 8,800 cup | |
225 | Cast #452374 | 7.5 | 955 | max load; 1.272" OAL; 18,000 cup | |
Cast Bullet Data Lyman Reloading Handbook 49th Edition cases: Remington (except where otherwise specified in remarks); trim-to length: .888"; primers: Remington 2 1/2 (except where otherwise specified in remarks); primer size: Large Pistol; Lyman shell holder: No. 2; cast bullets used sized to .451" dia.; firearm used: Universal Receiver; barrel length: 5"; twist: 1-16"; groove dia.: .450" |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
230 | Jacketed | 6.0 | 666 | start load; min OAL: 1.260 | |
230 | Jacketed | 6.7 | 731 | never exceed; min OAL: 1.260; 14,960 cup | |
Lee Precision Data CAUTION: With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
200 | Speer LSWC | 5.5 | 708 | start charge | |
200 | Speer LSWC | 6.0 | 770 | maximum charge | |
250 | Speer LSWC | 6.3 | 691 | start charge | |
250 | Speer LSWC | 6.7 | 782 | maximum charge | |
230 | Speer GDHP, GDHP SB or 225 GR Colt JHP | 6.5 | 782 | start charge | |
230 | Speer GDHP, GDHP SB or 225 GR Colt JHP | 7.0 | 850 | maximum charge | |
Speer Reloading Manual #14 max. case length: 0.898"; trim-to length: 0.888"; max cart. OAL: 1.275"; RCBS shell holder: #8; cart. case: Remington; primer: CCI 300; test firearm: S&W Model 25-2; barrel length: 6.5"; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
230 | RCBS 45-225 | 7.0 | 820 | diameter: 0.452 in.; factory equivalent | |
in a Colt Velocities represent five-shot averages taken ten feet from the muzzles of the test revolvers and measured on an Oehler Model 33 Chronotach. Colt Model 17 barrel, 5 1/2 inches, Webley Mark VI barrel, 6 inches. Range temperature, 87 degrees F. No wind. CCI 300 primers used with all loads. Five of every type of cast bullet used in the range tests were checked on a Saeco hardness tester. Average hardness level of alloy, 6 1/2. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
225 | Speer JHP | 6.6 | 736 | group (inches): 2.00 | |
250 | Laser Cast RN/FP | 6.4 | 874 | group (inches): 4.63 | |
in a Colt 1917 All group figures are for 10 rounds fired with the revolvers mounted in a Ransom Pistol Machine Rest. The RCBS and Redding/SAECO bullets cast by Mike were poured of 1/20 (tin to lead) alloy, sized .452 inch and lubed with SPG. The AA Limited and Laser Cast bullets were sized .452 inch. The Speer 225-grain JHP was .451 inch, and the Remington 250-grain RN/FP was .453 inch. All loads used Remington brass and Winchester Large Pistol primers and were assembled with a set of Lyman .45 ACP dies. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
230 | RCBS 45-225 | 7.0 | 739 | diameter: 0.452 in.; factory equivalent | |
in a Webley Velocities represent five-shot averages taken ten feet from the muzzles of the test revolvers and measured on an Oehler Model 33 Chronotach. Colt Model 17 barrel, 5 1/2 inches, Webley Mark VI barrel, 6 inches. Range temperature, 87 degrees F. No wind. CCI 300 primers used with all loads. Five of every type of cast bullet used in the range tests were checked on a Saeco hardness tester. Average hardness level of alloy, 6 1/2. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
225 | Speer JHP | 6.6 | 684 | group (inches): 2.13 | |
250 | Laser Cast RN/FP | 6.4 | 915 | group (inches): 2.25 | |
in an S&W 1950 All group figures are for 10 rounds fired with the revolvers mounted in a Ransom Pistol Machine Rest. The RCBS and Redding/SAECO bullets cast by Mike were poured of 1/20 (tin to lead) alloy, sized .452 inch and lubed with SPG. The AA Limited and Laser Cast bullets were sized .452 inch. The Speer 225-grain JHP was .451 inch, and the Remington 250-grain RN/FP was .453 inch. All loads used Remington brass and Winchester Large Pistol primers and were assembled with a set of Lyman .45 ACP dies. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
225 | Speer JHP | 6.6 | 717 | group (inches): 2.50 | |
250 | Laser Cast RN/FP | 6.4 | 912 | group (inches): 3.75 | |
in an S&W 1955 All group figures are for 10 rounds fired with the revolvers mounted in a Ransom Pistol Machine Rest. The RCBS and Redding/SAECO bullets cast by Mike were poured of 1/20 (tin to lead) alloy, sized .452 inch and lubed with SPG. The AA Limited and Laser Cast bullets were sized .452 inch. The Speer 225-grain JHP was .451 inch, and the Remington 250-grain RN/FP was .453 inch. All loads used Remington brass and Winchester Large Pistol primers and were assembled with a set of Lyman .45 ACP dies. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
250 | Hornady JHP | 6.7 | 791 | Primer: Fed. 150; ME: 345; barely acceptable accuracy | |
Load Data All loads in Remington brass. Velocities taken on an Oehler M-10 Chronograph; 7 1/2 feet instrumental converted to muzzle velocity. Average temperature, 66 degrees. Test gun was an S&W M1917 with 5 1/2-inch barrel. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
250 | Lyman 454424 | 9.0 | 883 | group (inches): 2.0 | |
246 | RCBS 45-246 | 9.0 | group (inches): 2.0 | ||
250 | Speer 250 LSWC | 9.0 | 820 | ||
240 | Sierra 240 JHC | 9.0 | 933 | group (inches): 2.5 | |
Colt Peacemaker Loads Source: Loading the Peacemaker - Dave Scovill | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
160 | Cast LRNFP | 8.0 | 842 | start load; COL: 1.500"; 7,700 psi | |
160 | Cast LRNFP | 10.8 | 1138 | max load; COL: 1.500"; 13,200 psi | |
180 | Cast LRNFP | 8.4 | 830 | start load; COL: 1.540"; 8,300 psi | |
180 | Cast LRNFP | 10.5 | 1048 | max load; COL: 1.540"; 12,700 psi | |
200 | Cast LRNFP | 7.9 | 791 | start load; COL: 1.600"; 8,600 psi | |
200 | Cast LRNFP | 10.0 | 986 | max load; COL: 1.600"; 12,100 psi | |
200 | Hornady XTP | 8.8 | 833 | start load; COL: 1.600"; 10,200 psi | |
200 | Hornady XTP | 10.2 | 976 | max load; COL: 1.600"; 12,700 psi | |
215 | Cast LRNFP | 8.3 | 760 | start load; COL: 1.650"; 7,900 psi | |
215 | Cast LRNFP | 10.0 | 935 | max load; COL: 1.650"; 11,300 psi | |
225 | Hornady FTX | 8.3 | 762 | start load; COL: 1.600"; 9,000 psi | |
225 | Hornady FTX | 10.2 | 974 | max load; COL: 1.600"; 13,400 psi | |
250 | Cast LRNFP | 8.2 | 786 | start load; COL: 1.600"; 10,600 psi | |
250 | Cast LRNFP | 9.0 | 864 | max load; COL: 1.600"; 12,200 psi | |
250 | Hornady XTP | 7.0 | 653 | start load; COL: 1.595"; 9,900 psi | |
250 | Hornady XTP | 8.6 | 834 | max load; COL: 1.595"; 13,600 psi | |
260 | Speer JHP | 7.0 | 574 | start load; COL: 1.595"; 8,700 psi | |
260 | Speer JHP | 8.6 | 772 | max load; COL: 1.595"; 12,900 psi | |
230 | Cast LRNFP | 8.0 | 766 | start load; COL: 1.580"; 9,300 psi | |
230 | Cast LRNFP | 9.2 | 898 | max load; COL: 1.580"; 11,800 psi | |
Hodgdon Pistol Data Case: Winchester; barrel length: 7.25"; twist: 1:16"; trim length: 1.280"; primer: Winchester LP; bullet diam.: .452". NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
250 | Lead | 9.1 | 813 | start load; min. OAL: 1.600 | |
250 | Lead | 10.0 | 885 | never exceed; min. OAL: 1.600; 13,500 cup | |
Lee Precision Data Large Pistol primer; with NEVER EXCEED LOADS maintain Minimum Over All Length or longer (Modern Reloading - Second Edition - Richard Lee) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
250 | Nosler Sporting Handgun Jacketed Hollow Point | 8.6 | 839 | maximum load | |
250 | Nosler Sporting Handgun Jacketed Hollow Point | 8.1 | 782 | most accurate load tested | |
250 | Nosler Sporting Handgun Jacketed Hollow Point | 7.6 | 725 | ||
(Single Action Army and Replicas) - Handgun (Using Nosler Bullets) handgun: barrel: Douglas, length: 7.25", twist: 1-16"; case: Winchester; primer: Rem. 2 1/2; OACL: 1.590"; maximum SAAMI overall cartridge length: 1.600"; use maximum loads with caution | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
225 | Speer CAV | 9.5 | 1019 | start charge | |
225 | Speer CAV | 10.3 | 1071 | maximum charge | |
Speer Reloading Manual #14 max. case length: 1.285"; trim-to length: 1.275"; max cart. OAL: 1.600"; RCBS shell holder: #20; cart. case: Winchester; primer: CCI 300; test firearm: Winchester Model 95 "Trapper"; barrel length: 16"; bullets: 225-grain Speer CAV or 230-grain Speer CM; bullets were cast in RCBS moulds; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
225 | Hornady FTX | 9.8 | 900 | maximum load; DO NOT REDUCE | |
Handgun (FTX Data) max. case length: 1.230"; case trim length: 1.215"; bullet diameter: .452"; pistol: Ruger Blackhawk; barrel: 7 1/2" 1 in 16" twist; case: Starline; primer: WLP; bullet: 225 GR. FTX; maximum COL: 1.645"; sectional density: .157; ballistic coefficient: .140; use maximum loads with caution | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
225 | Speer CAV or 230 CM | 9.5 | 793 | start charge | |
225 | Speer CAV or 230 CM | 10.3 | 917 | maximum charge | |
255 | Speer SWC | 9.0 | 808 | start charge | |
255 | Speer SWC | 10.0 | 865 | maximum charge | |
230 | Speer GDHP SB or GDHP or 225 JHP | 10.3 | 836 | start charge | |
230 | Speer GDHP SB or GDHP or 225 JHP | 11.0 | 962 | maximum charge | |
Speer Reloading Manual #14 max. case length: 1.285"; trim-to length: 1.275"; max cart. OAL: 1.600"; RCBS shell holder: #20; cart. case: Winchester; primer: CCI 300 (except where otherwise specified in remarks); test firearm: Colt Single Action Army; barrel length: 5.5"; NOTE: the 255 SWC, 225 CAV & 230 CM bullets were cast in RCBS moulds; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
200 | Speer Jacketed HP | 9.5 | 679 | sugg. start load; 1.557" OAL | |
200 | Speer Jacketed HP | 11.8 | 950 | max load; 1.557" OAL | |
Handgun Data Lyman Reloading Handbook 49th Edition cases: Winchester; trim-to length: 1.275"; primers: Winchester WLP; primer size: Large Pistol; Lyman shell holder: No. 11; firearms used: Universal Receiver & Ruger Blackhawk; barrel length: 7 1/2"; twist: 1-16"; groove dia.: .451" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
242 | Lyman 452490 | 10.0 | 784 | charge: plus one grain of Dacron filler; extreme spread (fps): 46; excellent field load | |
in a 4-3/4 Ruger Blackhawk Velocities represent five-shot averages measured ten feet from the muzzle of a Ruger Blackhawk by an Oehler Model 33 Chronotach. Ruger barrel was 4-3/4 inches long. Temperature was 60 degrees F. All loads made up with Remington cases and CCI Large Pistol primers. All bullets sized 0.452 inch. Each of the above combinations grouped three inches or less, extreme spread, at twenty-five yards with the test revolvers handheld and supported by sandbags. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
225 | Hornady FTX | 9.8 | 923 | maximum load | |
Revolver (using 225 GR Hornady Bullets) Gun: Ruger New Model (Bisley) Blackhawk; barrel length: 5 1/2 inches; case: Starline; primer: Winchester WLP; bullet diameter: .452"; COAL: 1.645; maximum COAL: 1.600"; maximum case length: 1.285"; trim to length: 1.215"; | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
250 | Oregon Trail Laser-Cast RNFP | 9.5 | 860 | ||
Traditional Handload Data All loads, fired from a 4 3/4-inch barreled USFA Pre-War SAA, produced between 850 and 870 fps average velocity and are thus listed at 860 fps to more or less duplicate traditional .45 Colt ballistics. Starline cases and CCI 300 Large Pistol primers were used throughout. Overall loaded length: 1.575 inches. Bullet diameter: .452 inch used herein (.454 inch suggested for guns with throats .454 or larger); maximum case length: 1.285 inches; trim-to case length: 1.275 inches. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
225 | Speer CAV | 6.5 | 606 | start charge | |
225 | Speer CAV | 7.2 | 692 | maximum charge | |
Speer Reloading Manual #14 Cowboy Action Shooting Data; max. case length: 1.090"; trim-to length: 1.080"; max cart. OAL: 1.430"; RCBS shell holder: #35; cart. case: Starline; primer: CCI 300; test firearm: Colt Single Action Army; barrel length: 5.5"; a 230-GR Speer CM can also be used for these loads; NOTE: these bullets were cast in RCBS moulds; maximum loads should be used with CAUTION |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
200 | Speer JSP | 15 | 1,668 | 5/16 | |
Contender loads THESE LOADS ARE NOT FOR USE IN ANY OTHER GUN EXCEPT THE CONTENDER. None was maximum in the test barrel, but are based on pressure used in W-W factory ammunition. All groups in three-shot strings with scope from bench over sandbag rest. .45 Winchester Magnum, Contender 10-in. barrel; W-W cases; CCI 350 magnum primers; Oehler 34/50 chronograph system; velocity instrumental at 15 ft converted to muzzle velocity; temperature 70 degrees. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
250 | Remington Lead RN | 8.0 | 666 | case expansion: normal; accuracy class: B | |
Test revolver was Colt New Service with 5 1/2-inch barrel. All loads employed Dominion (Canadian) .455 Colt cases. Federal No. 150 Large Pistol primers used in all handloads. Oehler Model 31 Chronograph and Model 51 screens used to measure velocities. Velocities are instrumental, measured 8 feet from muzzle (not corrected to muzzle velocity). Lyman 3-die reloading set used to resize cases and seat bullets. The following accuracy classification system was used in these tests: A+ = 1-inch or less at 20 yards; A = 1 1/16 - 1 1/2 inches; B = 1 9/16 - 2 inches; C = 2 1/16 - 2 1/2 inches; D = Over 2 1/2 inches. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
155 | Remington JHP | 8.5 | 1,310 | 34,400 psi | |
180 | Winchester JHP | 7.6 | 1,155 | 34,400 psi | |
200 | Hornady XTP | 6.6 | 1,045 | 35,800 psi | |
IMR Data - Maximum Loads case: Remington; barrel length: 5"; twist: 1:16"; trim length: .987"; primer: Remington 2 1/2; bullet diam.: .400"; COL: 1.250"; NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
155 | Jacketed | 8.2 | 1262 | start load; min OAL: 1.250 | |
155 | Jacketed | 8.5 | 1310 | never exceed; min OAL: 1.250; 34,400 psi | |
180 | Jacketed | 7.3 | 1111 | start load; min OAL: 1.250 | |
180 | Jacketed | 7.6 | 1155 | never exceed; min OAL: 1.250; 34,400 psi | |
200 | Jacketed | 6.1 | 968 | start load; min OAL: 1.250 | |
200 | Jacketed | 6.6 | 1045 | never exceed; min OAL: 1.250; 35,800 psi | |
Lee Precision Data Large Pistol Primer. CAUTION: With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. (Modern Reloading - Second Edition - Richard Lee) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
155 | Hornady HP-XTP | 8.8 | 1287 | ||
155 | Hornady HP-XTP | 9.3 | 1318 | ||
155 | Hornady HP-XTP | 9.8 | 1349 | ||
155 | Hornady HP-XTP | 10.3 | 1388 | ||
155 | Hornady HP-XTP | 10.9 | 1426 | ||
155 | Hornady HP-XTP | 11.4 | 1450 | maximum load | |
180 | Hornady HAP, HP-XTP, FMJ-FP ENC | 6.8 | 1056 | ||
180 | Hornady HAP, HP-XTP, FMJ-FP ENC | 7.3 | 1100 | ||
180 | Hornady HAP, HP-XTP, FMJ-FP ENC | 7.8 | 1141 | ||
180 | Hornady HAP, HP-XTP, FMJ-FP ENC | 8.3 | 1199 | ||
180 | Hornady HAP, HP-XTP, FMJ-FP ENC | 8.8 | 1238 | maximum load | |
200 | Hornady HP-XTP or HAP | 6.2 | 954 | ||
200 | Hornady HP-XTP or HAP | 6.7 | 1001 | ||
200 | Hornady HP-XTP or HAP | 7.1 | 1055 | ||
200 | Hornady HP-XTP or HAP | 7.5 | 1112 | ||
200 | Hornady HP-XTP or HAP | 8.0 | 1167 | maximum load | |
Using Hornady Bullets Gun: Kimber Stainless Target II; barrel length: 5"; case: Starline; primer: Win. Large Pistol; bullet diameter: .400"; COAL: 1.260"; maximum COAL: 1.260"; maximum case length: .992; trim to length: .982. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
155 | Hornady JHP | 8.0 | 1,133 | case expansion moderate | |
155 | Hornady JHP | 9.0 | 1,219 | case expansion normal | |
150 | Sierra JHP | 9.5 | 1,276 | case expansion near maximum; accurate | |
170 | Nosler JHP | 9.0 | 1,198 | case expansion near maximum | |
Jacketed Bullets Test pistol was a Colt Delta Elite with a five-inch barrel. All loads used Federal F-150 primers. Special care should be exercised to differentiate between HS-7 and AAC-7 powders! |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
147 | Hornady HPBT-XTP | 3.4 | 777 | overall loaded length (inches): 1.100 | |
147 | Hornady HPBT-XTP | 4.5 | 999 | overall loaded length (inches): 1.100 | |
147 | Hornady HPBT-XTP | 4.9 | 1071 | overall loaded length (inches): 1.100 | |
(147 GR) Handload Data A 5-inch barreled Kimber Model 1911 Team Match II was used to shoot all loads in Starline cases with Winchester Small Pistol primers. SAAMI minimum cartridge overall length: 1.000 inch; maximum cartridge overall length: 1.169 inches; maximum case length: .754 inch; trim to length: .744 inch. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
115 | Barnes XPB | 5.4 | 1225 | overall loaded length (inches): 1.125 | |
115 | Barnes XPB | 5.9 | 1269 | overall loaded length (inches): 1.125 | |
115 | Barnes XPB | 6.4 | 1319 | overall loaded length (inches): 1.125 | |
115 | Hornady HP-XTP | 5.2 | 1141 | overall loaded length (inches): 1.075 | |
115 | Hornady HP-XTP | 6.1 | 1297 | overall loaded length (inches): 1.075 | |
115 | Hornady HP-XTP | 6.4 | 1348 | overall loaded length (inches): 1.075 | |
115 | Speer Gold Dot HP | 5.0 | 1092 | overall loaded length (inches): 1.125 | |
115 | Speer Gold Dot HP | 6.5 | 1348 | overall loaded length (inches): 1.125 | |
(90 & 115 GR) Handload Data A 5-inch barreled Kimber Model 1911 Team Match II was used to shoot all loads in Starline cases with Winchester Small Pistol primers. SAAMI minimum cartridge overall length: 1.000 inch; maximum cartridge overall length: 1.169 inches; maximum case length: .754 inch; trim to length: .744 inch. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
126 | Magma SKU-9-125 roundnose cast (sized .3560) | 5.0 | 932 | OAL (inches): 1.11; case expansion: normal; best accuracy with Magma bullets | |
126 | Magma SKU-9-125 roundnose cast (sized .3560) | 5.3 | 1,012 | OAL (inches): 1.11; case expansion: normal | |
125 | SAECO SWC Cast (Sized .355 inch) | 5.0 | 889 | OAL (inches): 1.09; case expansion: moderate | |
125 | SAECO SWC Cast (Sized .355 inch) | 5.5 | 985 | OAL (inches): 1.09; case expansion: normal; third best accuracy with SAECO bullets | |
130 | Ohaus Cast (Sized .3565 inch) | 5.0 | 972 | OAL (inches): 1.13; case expansion: normal; best accuracy with Ohaus bullets | |
124 | Hornady Swaged (Sized .355 inch) | 5.0 | 864 | OAL (inches): 1.13; case expansion: moderate | |
124 | Hornady Swaged (Sized .355 inch) | 5.5 | 974 | OAL (inches): 1.13; case expansion: normal; fifth best accuracy with Hornady bullets | |
125 | Alberts Swaged (Sized .3565 inch) | 5.5 | 950 | OAL (inches): 1.11; case expansion: near max; fifth best accuracy | |
in a Beretta Federal cases and Federal 100 Small Pistol primers used for all loads. Velocities are instrumental at 10 feet from the muzzle, using Oehler Model 31 chronotach and Oehler Model 51 electronic screens with 10-foot spacing. Barrel lengths of test gun: Beretta, 5-inch barrel. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
126 | Magma SKU-9-125 roundnose cast (sized .3560) | 5.0 | 938 | OAL (inches): 1.11; case expansion: normal; best accuracy with Magma bullets | |
130 | Ohaus Cast (Sized .3565 inch) | 5.0 | 988 | OAL (inches): 1.13; case expansion: normal; best accuracy with Ohaus bullets | |
124 | Hornady Swaged (Sized .355 inch) | 5.5 | 1,012 | OAL (inches): 1.13; case expansion: normal; fifth best accuracy with Hornady bullets | |
125 | Alberts Swaged (Sized .3565 inch) | 5.5 | 992 | OAL (inches): 1.11; case expansion: near max; second best accuracy in Ruger | |
in a Ruger Federal cases and Federal 100 Small Pistol primers used for all loads. Velocities are instrumental at 10 feet from the muzzle, using Oehler Model 31 chronotach and Oehler Model 51 electronic screens with 10-foot spacing. Barrel lengths of test gun: Ruger, 4 1/2-inch barrel. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
115 | Lead Round Nose | 4.5 | 1027 | start load; bullet diam.: .356"; COL: 1.100"; 25,000 psi | |
115 | Lead Round Nose | 5.2 | 1145 | max load; bullet diam.: .356"; COL: 1.100"; 31,600 psi | |
124 | Berry's Bullets HBRN TP | 4.9 | 967 | start load; bullet diam.: .356"; COL: 1.150"; 27,100 psi | |
124 | Berry's Bullets HBRN TP | 5.4 | 1066 | max load; bullet diam.: .356"; COL: 1.150"; 30,800 psi | |
125 | Lead Conical Nose | 4.2 | 972 | start load; bullet diam.: .356"; COL: 1.125"; 24,400 psi | |
125 | Lead Conical Nose | 4.8 | 1071 | max load; bullet diam.: .356"; COL: 1.125"; 30,200 psi | |
125 | Hornady HAP | 3.9 | 868 | start load; bullet diam.: .356"; COL: 1.069"; 27,200 psi | |
125 | Hornady HAP | 4.2 | 940 | max load; bullet diam.: .356"; COL: 1.069"; 32,200 psi | |
125 | Sierra FMJ | 4.5 | 973 | start load; COL: 1.090"; 25,700 psi | |
125 | Sierra FMJ | 4.9 | 1037 | max load; COL: 1.090"; 28,700 psi | |
147 | Hornady XTP | 3.0 | 668 | start load; COL: 1.100"; 21,800 psi | |
147 | Hornady XTP | 3.6 | 834 | max load; COL: 1.100"; 29,900 psi | |
Hodgdon Data Using IMR Powder Case: Winchester; twist: 1:10"; primer: CCI 500, Small Pistol; barrel length: 4"; trim length: .750"; bullet diam.: .355" (except where otherwise specified in remarks.) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
115 | Rem JHP | 6.3 | 1175 | compressed load; COL: 1.110"; 30,600 cup | |
124 | Rem MC | 6.3 | 1160 | compressed load; COL: 1.135"; 32,400 cup | |
147 | Hornady XTP | 4.4 | 950 | COL: 1.130"; 32,700 cup | |
IMR Pistol Data Maximum Loads case: Remington; barrel length: 4.0"; twist: 1:10"; trim length: .750"; primer: CCI 500; bullet diam.: .355"; NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
115 | Jacketed | 6.0 | 1120 | start load; min OAL: 1.110 | |
115 | Jacketed | 6.3 | 1175 | never exceed; min OAL: 1.110; 30,600 cup | |
124 | Jacketed | 5.6 | 1055 | start load; min OAL: 1.135 | |
124 | Jacketed | 6.3 | 1160 | never exceed; min OAL: 1.135; 32,400 cup | |
147 | XTP | 3.9 | 855 | start load; min OAL: 1.130 | |
147 | XTP | 4.4 | 950 | never exceed; min OAL: 1.130; 32,700 cup | |
Lee Precision Data Small pistol primer. CAUTION: With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
92 | Cast #358242 | 5.3 | 1168 | sugg. start load; OAL: 1.045"; 22,400 cup | |
92 | Cast #358242 | 7.2 | 1380 | max load; OAL: 1.045"; 30,500 cup | |
115 | Cast #358345 | 4.2 | 1005 | sugg. start load; OAL: .997"; 18,800 cup | |
115 | Cast #358345 | 6.1 | 1284 | max load; OAL: .997"; 32,000 cup | |
121 | Cast #356402 | 4.0 | 925 | sugg. start load; OAL: 1.110"; 12,500 cup | |
121 | Cast #356402 | 5.5 | 1198 | max load; OAL: 1.110"; 32,900 cup | |
Lyman Cast Bullet Handbook 3rd Edition The trim-to length should be adhered to closely. A short case or crimp on the mouth can cause problems with headspace. Most popular cast bullet for this caliber is #356402. Cases: Federal (except where otherwise specified in remarks); trim-to length: .751"; primers: CCI 500 (except where otherwise specified in remarks); primer size: Small Pistol; Lyman shell holder: No. 12; cast bullets used sized to .358" dia.; firearm used: Universal Receiver; barrel length: 4"; twist: 1-10"; groove diameter: .358" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
147 | Speer GDHP or TMJ FN | 4.2 | 841 | start charge | |
147 | Speer GDHP or TMJ FN | 4.6 | 957 | maximum charge | |
Speer Reloading Manual #14 max. case length: 0.754"; trim-to length: 0.744"; max cart. OAL: 1.169"; RCBS shell holder: #16; cart. case: Speer; primer: CCI 500; test firearm: S&W M5906; barrel length: 4"; 147-grain bullets not recommended for barrels longer than 10 inches; IMPORTANT SAFETY NOTE: These loads were developed and tested for safe use in HANDGUNS. Not all loads may be suitable for use in a carbine or rifle chambered for this cartridge. If loading for a carbine or rifle, choose from among the loads developing the highest handgun velocities and load just a few rounds. Thoroughly test this small sample in your firearm in slow-fire mode, insuring that you achieve proper feeding and ejection. Be certain that all bullets exit the barrel; watching the target for each bullet strike is the best way to know that the load produces sufficient gas volume for a longer barrel. Use maximum loads with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
115 | Hornady HP-XTP or FMJ-RN | 5.2 | 1141 | ||
115 | Hornady HP-XTP or FMJ-RN | 5.5 | 1185 | ||
115 | Hornady HP-XTP or FMJ-RN | 5.8 | 1242 | ||
115 | Hornady HP-XTP or FMJ-RN | 6.1 | 1297 | ||
115 | Hornady HP-XTP or FMJ-RN | 6.4 | 1348 | maximum load | |
Using 115 GR Hornady Bullets Gun: Kimber 1911; barrel length: 5-inch; case: Starline; primer: Winchester Small Pistol; bullet diameter: .355"; HP-XTP COAL: 1.075"; FMJ-RN COAL: 1.100"; maximum COAL: 1.169"; maximum case length: .754"; trim to length: .749". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
124 | Hornady HP-XTP | 4.1 | 942 | ||
124 | Hornady HP-XTP | 4.6 | 1026 | ||
124 | Hornady HP-XTP | 5.0 | 1110 | ||
124 | Hornady HP-XTP | 5.5 | 1195 | maximum load | |
Using 124 GR Hornady Bullets Gun: Kimber 1911; barrel length: 5-inch; case: Starline; primer: Winchester Small Pistol; bullet diameter: .355"; COAL: 1.060"; maximum COAL: 1.169"; maximum case length: .754"; trim to length: .749". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
147 | Hornady HP-BT-XTP | 3.4 | 777 | ||
147 | Hornady HP-BT-XTP | 3.8 | 840 | ||
147 | Hornady HP-BT-XTP | 4.1 | 920 | ||
147 | Hornady HP-BT-XTP | 4.5 | 999 | ||
147 | Hornady HP-BT-XTP | 4.9 | 1071 | maximum load | |
Using 147 GR Hornady Bullets Gun: Kimber 1911; barrel length: 5-inch; case: Starline; primer: Winchester Small Pistol; bullet diameter: .355"; COAL: 1.100"; maximum COAL: 1.169"; maximum case length: .754"; trim to length: .749". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
115 | Nosler Sporting Handgun Pistol JHP | 6.5 | 1178 | max; compressed load; most accurate load tested; most accurate powder tested | |
115 | Nosler Sporting Handgun Pistol JHP | 6.0 | 1083 | compressed load; most accurate powder tested | |
115 | Nosler Sporting Handgun Pistol JHP | 5.5 | 988 | most accurate powder tested | |
Using Nosler Bullets Case: Winchester; primer: Rem 1 1/2; barrel length/make: 4" Douglas; twist: 1-16"; bullets: 115 GR Nosler Sporting Handgun Pistol JHP - OACL: 1.100"; 124 GR Nosler Sporting Handgun Pistol JHP - OACL: 1.120"; maximum OACL: 1.169". Use Maximum Loads with Caution | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
90 | Cast #356242 | 5.3 | 1168 | sugg. start load; 22,400 cup; 1.045" OAL | |
90 | Cast #356242 | 7.2 | 1380 | max load; 30,500 cup; 1.045" OAL | |
147 | Cast #356637 | 3.1 | 769 | sugg. start load; 25,000 cup; 1.058" OAL | |
147 | Cast #356637 | 3.6 | 896 | max load; 30,700 cup; 1.058" OAL | |
Cast Bullet Handgun Data Lyman Reloading Handbook 49th Edition cases: Federal; trim-to length: .751"; primers: CCI 500; primer size; Small Pistol; Lyman shell holder: No. 12; cast bullets used sized to .356" dia.and all #2 Alloy; firearm used: Universal Receiver; barrel length: 4"; groove dia.: .355" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
90 | Sierra Jacketed HP | 5.0 | 1028 | sugg. start load; 24,000 cup; 1.010" OAL | |
90 | Sierra Jacketed HP | 6.2 | 1352 | max load; 31,900 cup; 1.010" OAL | |
95 | Sierra FMJ | 4.5 | 983 | sugg. start load; 20,700 cup; 1.005" OAL | |
95 | Sierra FMJ | 5.8 | 1306 | max load; 32,700 cup; 1.005" OAL | |
115 | Hornady Jacketed HP/XTP | 4.5 | 946 | sugg. start load; 18,600 cup; 1.090" OAL | |
115 | Hornady Jacketed HP/XTP | 6.2 | 1147 | max load; compressed powder charge; 28,100 cup; 1.090" OAL | |
Handgun Data Lyman Reloading Handbook 49th Edition cases: Federal; trim-to length: .751"; primers: CCI 500; primer size; Small Pistol; Lyman shell holder: No. 12; firearm used: Universal Receiver; barrel length: 4"; groove dia.: .355" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
141 | H&G 12B semiwadcutter | 4.5 | 1,005 | OAL (inches): 1.13; maximum | |
147 | Redding/SAECO 929 semiwadcutter | 4.0 | 930 | OAL (inches): 1.16 | |
147 | Redding/SAECO 929 semiwadcutter | 4.3 | 970 | OAL (inches): 1.16 | |
147 | Lyman 358212 roundnose | 4.0 | OAL (inches): 1.17 | ||
147 | Lyman 358212 roundnose | 4.3 | OAL (inches): 1.17 | ||
153 | Redding/SAECO 910 roundnose | 4.0 | 840 | OAL (inches): 1.16; maximum | |
157 | Lyman 356637 flatnose | 4.0 | 860 | OAL (inches): 1.15 | |
157 | Lyman 356637 flatnose | 4.3 | 930 | OAL (inches): 1.15; maximum | |
Cast Bullet Loads Reduce initial charge by 10% before working up. If the overall cartridge length is either increased or decreased, further reduce initial powder charges. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
124 | Hornady HP-XTP | 4.1 | 942 | overall loaded length (inches): 1.060 | |
124 | Hornady HP-XTP | 5.5 | 1195 | overall loaded length (inches): 1.060 | |
124 | Speer Gold Dot HP | 4.0 | 907 | overall loaded length (inches): 1.120 | |
124 | Speer Gold Dot HP | 5.5 | 1226 | overall loaded length (inches): 1.120 | |
Handload Data A 5-inch barreled Kimber Model 1911 Team Match II was used to shoot all loads in Starline cases with Winchester Small Pistol primers. SAAMI minimum cartridge overall length: 1.000 inch; maximum cartridge overall length: 1.169 inches; maximum case length: .754 inch; trim to length: .744 inch. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
115 | Hornady JHP | 6.2 | 1,047 | length (inches): 1.110; expansion: moderate; accuracy class: B+; good load, moderate velocity | |
in a 4-inch Barrel Test gun: S&W Model 39-2; R-P cases; Alcan SP primers. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
122 | Bushwacker FP | 5.0 | 1,080 | primer: Federal 100; group (inches): 1.54; maximum | |
125 | Bushwacker RN | 5.4 | 1,140 | primer: Federal 100; group (inches): 2.09; maximum; recoil sharp | |
125 | Bushwacker SWC | 5.4 | 1,158 | primer: Federal 100; group (inches): 2.68 | |
145 | Bushwacker RN | 4.8 | 1,046 | primer: Federal 100; group (inches): 1.73 | |
in an S & W Model 952-2 Cast Bullets A Smith & Wesson Model 952-2 PC with a 5-inch barrel and open sights was used for testing. Once-fired Federal cases were used throughout. Velocities were taken 12 feet from the muzzle with an Oehler M-35P chronograph. Accuracy is the average of three, five-shot groups at 25 yards from a sandbag rest. WSL=Winchester Super Lite; WSP=Winchester Small Pistol primer. Range temperatures were 58 to 74 degrees Fahrenheit. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
125 | Sierra JHP | 5.4 | 1,117 | primer: Federal 100; group (inches): 1.32 | |
in an S&W Model 952-2 (Jacketed Bullets) A Smith & Wesson Model 952-2 PC with a 5-inch barrel and open sights was used for testing. Once-fired Federal cases were used throughout. Velocities were taken 12 feet from the muzzle with an Oehler M-35P chronograph. Accuracy is the average of three, five-shot groups at 25 yards from a sandbag rest. Range temperatures were 58 to 74 degrees Fahrenheit. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
90 | Sierra Jacketed HP | 6.9 | 1293 | sugg. start load; 22,500 cup; 1.063" OAL | |
90 | Sierra Jacketed HP | 8.0 | 1480 | max load; compressed powder charge; 31,000 cup; 1.063" OAL | |
115 | Sierra Jacketed HP | 5.8 | 1119 | sugg. start load; 24,600 cup; 1.063" OAL | |
115 | Sierra Jacketed HP | 7.0 | 1323 | max load; compressed powder charge; 32,800 cup; 1.063" OAL | |
124 | Hornady FMJ/FP | 5.0 | 887 | sugg. start load; 20,800 cup; 1.090" OAL | |
124 | Hornady FMJ/FP | 6.5 | 1222 | max load; 31,000 cup; 1.090" OAL | |
120 | Cast #356402 | 4.8 | 826 | sugg. start load; 18,100 cup; 1.169" OAL | |
120 | Cast #356402 | 6.0 | 1228 | max load; 29,500 cup; 1.169" OAL | |
147 | Cast #356637 | 4.0 | 767 | sugg. start load; 23,300 cup; 1.119" OAL | |
147 | Cast #356637 | 4.7 | 930 | max load; 31,800 cup; 1.119" OAL | |
Lyman Reloading Handbook 49th Edition cases: Geco; trim-to length: .830"; primers: Winchester WSP; primer size: Small Pistol; Lyman shell holder: No. 12; cast bullets used sized to .355" dia.; firearm used: Universal Receiver; barrel length: 5"; twist: 1-16"; groove dia.: .355" |