This spherical powder is the most versatile shotshell heavy field propellant Hodgdon has ever produced. Great loads in 10 ga., 12 ga., 16 ga., 20 ga., and 28 ga. are shown in Hodgdon’s Reloading Data Center. This propellant provides true magnum velocities with superb patterns. In addition, LONGSHOT is the best choice for those competitors shooting games such as "Buddy", "Annie Oakleys" and more. LONGSHOT is the high velocity pistol choice in 38 Super, 40 S&W, and 357 SIG at lower than usual operating pressures. Available in 1 lb., 4 lb. & 8 lb. containers.
Shape | Color | Perforation | Diameter min | Diameter max | Length/thick. min | Length/thick. max | Manufacturer |
---|---|---|---|---|---|---|---|
Irregular flattened ball | Gray | No | 1.0 mm | 1.33 mm | 0.25 mm | 0.25 mm | Hodgdon Powder Company |
Ladedata som finnes på hjemmesidene til Evje PK er KUN ment som en veiledning! Ladedata skal alltid verifiseres mot kjente kilder (kruttprodusenter, ladebøker o.l.)
Data funnet på våre hjemmesider brukes på eget ansvar, og Evje Pistolklubb fratar seg alt ansvar for feil bruk av, eller skrivefeil i oppgitte data.
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 83 | Berry's Bullets HBWC | 3.6 | 887 | start load; COL: 1.095"; 13,600 cup; bullet diam.: .314" |
![]() | 83 | Berry's Bullets HBWC | 4.4 | 1099 | max load; COL: 1.095"; 20,500 cup; bullet diam.: .314" |
![]() | 85 | Hornady HP | 4.0 | 948 | start load; COL: 1.290"; 11,500 cup; bullet diam.: .312" |
![]() | 85 | Hornady HP | 5.0 | 1167 | max load; COL: 1.290"; 20,200 cup; bullet diam.: .312" |
![]() | 90 | Sierra JHP | 4.0 | 945 | start load; COL: 1.340"; 12,100 cup; bullet diam.: .312" |
![]() | 90 | Sierra JHP | 5.0 | 1139 | max load; COL: 1.340"; 19,500 cup; bullet diam.: .312" |
![]() | 100 | Speer JHP | 4.0 | 903 | start load; COL: 1.345"; 13,900 cup; bullet diam.: .312" |
![]() | 100 | Speer JHP | 4.7 | 1056 | max load; COL: 1.345"; 19,300 cup; bullet diam.: .312" |
Hodgdon Pistol Data Case: Federal; twist: 1:16"; primer: Federal 100, Small Pistol; barrel length: 5"; trim length: 1.070". |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 60 | Gold Dot Hollow Point | 5.0 | 1,145 | starting load; 18,200 PSI |
![]() | 60 | Gold Dot Hollow Point | 5.4 | 1,220 | maximum load; 20,900 PSI |
![]() | 71 | Hornady FMJ/RN | 4.6 | 1,057 | starting load; 18,800 PSI |
![]() | 71 | Hornady FMJ/RN | 5.0 | 1,115 | maximum load; 21,700 PSI |
Hodgdon Pistol Data case: Corbon; barrel length: 2.5"; twist: 1:16"; trim length: .670"; primer: Winchester SP; 60 gr bullet diam.: .312"; COL: .930"; 71 gr bullet dia.: .311"; COL: .940"; NEVER EXCEED MAXIMUM LOADS |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 90 | Sierra JHC | 6.5 | 1152 | overall loaded length (inches): 1.555; Winchester Small Rifle primer; this load suitable only for Smith & Wesson Hand Ejector, Colt Army Specials and guns of similar strength |
![]() | 90 | Sierra JHC | 6.8 | 1161 | overall loaded length (inches): 1.555; Winchester Small Rifle primer; this load suitable only for Smith & Wesson Hand Ejector, Colt Army Specials and guns of similar strength |
![]() | 90 | Sierra JHC | 7.0 | 1194 | overall loaded length (inches): 1.555; Winchester Small Rifle primer; this load suitable only for Smith & Wesson Hand Ejector, Colt Army Specials and guns of similar strength |
![]() | 100 | Hornady XTP-HP | 6.0 | 1025 | overall loaded length (inches): 1.550; Winchester Small Rifle primer; this load suitable only for Smith & Wesson Hand Ejector, Colt Army Specials and guns of similar strength |
![]() | 100 | Hornady XTP-HP | 6.4 | 1078 | overall loaded length (inches): 1.550; Winchester Small Rifle primer |
![]() | 100 | Hornady XTP-HP | 6.7 | 1148 | overall loaded length (inches): 1.550; Winchester Small Rifle primer |
![]() | 116 | Lyman 311316GC cast | 5.5 | 1015 | overall loaded length (inches): 1.560; Winchester Small Rifle primer; this load suitable only for Smith & Wesson Hand Ejector, Colt Army Specials and guns of similar strength |
![]() | 116 | Lyman 311316GC cast | 6.0 | 1082 | overall loaded length (inches): 1.560; Winchester Small Rifle primer |
![]() | 116 | Lyman 311316GC cast | 6.5 | 1143 | overall loaded length (inches): 1.560; Winchester Small Rifle primer |
(+P Pressure) Handloads WARNING: THIS DATA SHOULD ONLY BE USED IN HANDGUNS WITH ADEQUATE STRENGTH TO HANDLE PRESSURES EXCEEDING INDUSTRY SPECIFICATIONS. A Colt Single Action Army with a 4.75-inch barrel was used to test fire these loads. Starline cases were used throughout. Bullet diameter: .312 and .313 inch. Maximum pressure: 30,000 CUP. Maximum overall loaded length: 1.592 inches; maximum case length: 1.315 inches; trim-to length: 1.305 inches. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 95 | Redding cast SWC | 4.5 | 847 | overall loaded length (inches): 1.528 |
![]() | 95 | Redding cast SWC | 5.0 | 922 | overall loaded length (inches): 1.528 |
![]() | 100 | Rim Rock RNFP cast | 4.8 | 896 | overall loaded length (inches): 1.618 |
![]() | 100 | Rim Rock RNFP cast | 5.0 | 942 | overall loaded length (inches): 1.618 |
![]() | 100 | Rim Rock RNFP cast | 5.3 | 1004 | overall loaded length (inches): 1.618 |
![]() | 100 | Speer JHP | 4.8 | 862 | overall loaded length (inches): 1.560 |
![]() | 100 | Speer JHP | 5.3 | 896 | overall loaded length (inches): 1.560 |
![]() | 115 | Oregon Trail FP BB | 4.5 | 908 | overall loaded length (inches): 1.560 |
![]() | 115 | Oregon Trail FP BB | 4.8 | 959 | overall loaded length (inches): 1.560 |
![]() | 115 | Oregon Trail FP BB | 5.0 | 1000 | overall loaded length (inches): 1.560 |
(Standard Pressure) Handloads All loads were fired from a 4.75-inch barreled Colt Single Action Army. Maximum pressure for these loads is 16,000 CUP. Starline cases and Winchester Small Rifle primers were used throughout. Bullet diameter: .312 to .314 inch. Maximum overall loaded length: 1.592 inches; maximum case length: 1.315 inches; trim-to length: 1.305 inches. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 85 | Hornady XTP | 6.5 | 1404 | start load; COL: 1.450"; 32,700 psi |
![]() | 85 | Hornady XTP | 7.2 | 1549 | max load; COL: 1.450"; 41,800 psi |
![]() | 90 | Sierra JHC | 6.6 | 1340 | start load; COL: 1.460"; 26,400 psi |
![]() | 90 | Sierra JHC | 7.3 | 1512 | max load; COL: 1.460"; 42,600 psi |
![]() | 100 | Hornady XTP | 6.0 | 1287 | start load; COL: 1.450"; 35,400 psi |
![]() | 100 | Hornady XTP | 6.7 | 1400 | max load; COL: 1.450"; 43,500 psi |
Hodgdon Data Case: Federal; barrel length: 5"; twist: 1:16"; trim length: 1.200"; primer: Federal 200; bullet diam.: .312 (except where otherwise specified in remarks). NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 100 | Speer Gold Dot Hollow-Point | 6.0 | 1221 | start charge |
![]() | 100 | Speer Gold Dot Hollow-Point | 7.0 | 1360 | max charge |
Speer Gold Dot Data max. case length: 1.200"; trim-to length: 1.190"; COAL tested: 1.465"; max cart. OAL: 1.475"; RCBS shell holder: #23; cart. case: Federal; primer: Federal 205; test firearm: Ruger SP-101; barrel length: 3". SPECIAL NOTE REGARDING PRIMERS: Due to the high operating pressures, factory ammo for the 327 Federal uses small rifle primers to prevent primer flowback. These handloads were developed with Federal #205 small rifle primers. However, small rifle MAGNUM primers are neither required nor recommended. Maximum loads should be used with CAUTION. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 90 | Sierra JHC | 6.0 | 1103 | primer: CCI 550; case: Speer; OAL (inches): 1.4670 |
![]() | 90 | Sierra JHC | 6.5 | 1150 | primer: CCI 550; case: Speer; OAL (inches): 1.4670 |
![]() | 90 | Sierra JHC | 7.0 | 1221 | primer: CCI 550; case: Speer; OAL (inches): 1.4670 |
![]() | 90 | Sierra JHC | 7.5 | 1299 | primer: CCI 550; case: Speer; OAL (inches): 1.4670 |
Firearm used was a Ruger SP101 with a 3 1/16-inch barrel. Federal Cartridge and Speer cases used as noted. Maximum case length: 1.200 inches. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 85 | Hornady XTP | 6.5 | 1328 | overall loaded length (inches): 1.448 |
![]() | 85 | Hornady XTP | 7.0 | 1404 | overall loaded length (inches): 1.448 |
![]() | 85 | Hornady XTP | 7.5 | 1505 | overall loaded length (inches): 1.448 |
![]() | 85 | Hornady XTP | 8.0 | 1580 | overall loaded length (inches): 1.448 |
![]() | 90 | Sierra JHC | 6.0 | 1210 | overall loaded length (inches): 1.467 |
![]() | 90 | Sierra JHC | 6.5 | 1292 | overall loaded length (inches): 1.467 |
![]() | 90 | Sierra JHC | 7.0 | 1401 | overall loaded length (inches): 1.467 |
![]() | 90 | Sierra JHC | 7.5 | 1484 | overall loaded length (inches): 1.467 |
![]() | 100 | Speer Gold Dot HP | 5.5 | 1092 | overall loaded length (inches): 1.450 |
![]() | 100 | Speer Gold Dot HP | 6.0 | 1167 | overall loaded length (inches): 1.450 |
![]() | 100 | Speer Gold Dot HP | 6.5 | 1266 | overall loaded length (inches): 1.450 |
![]() | 100 | Speer Gold Dot HP | 7.0 | 1340 | overall loaded length (inches): 1.450 |
![]() | 100 | Hornady XTP | 5.5 | 1102 | overall loaded length (inches): 1.455 |
![]() | 100 | Hornady XTP | 6.0 | 1178 | overall loaded length (inches): 1.455 |
![]() | 100 | Hornady XTP | 6.5 | 1279 | overall loaded length (inches): 1.455 |
![]() | 100 | Hornady XTP | 7.0 | 1353 | overall loaded length (inches): 1.455 |
![]() | 115 | Speer GDHP | 5.0 | 998 | overall loaded length (inches): 1.450 |
![]() | 115 | Speer GDHP | 5.4 | 1055 | overall loaded length (inches): 1.450 |
![]() | 115 | Speer GDHP | 5.8 | 1124 | overall loaded length (inches): 1.450 |
![]() | 115 | Speer GDHP | 6.2 | 1193 | overall loaded length (inches): 1.450 |
![]() | 115 | Speer GDHP | 6.7 | 1249 | overall loaded length (inches): 1.450 |
![]() | 130 | Rim Rock SWC Keith | 4.0 | 1017 | overall loaded length (inches): 1.436 |
![]() | 130 | Rim Rock SWC Keith | 4.5 | 1094 | overall loaded length (inches): 1.436 |
![]() | 130 | Rim Rock SWC Keith | 5.0 | 1187 | overall loaded length (inches): 1.436 |
![]() | 130 | Rim Rock SWC Keith | 5.5 | 1280 | overall loaded length (inches): 1.436 |
![]() | 130 | Rim Rock SWC Keith | 6.0 | 1355 | overall loaded length (inches): 1.436 |
Handloads A Ruger Single-Seven with a 7 1/2-inch barrel was used to test fire these loads. Federal cases and CCI 500 primers were used throughout. Bullet diameter: .312 and .313 inch; maximum case length: 1.200 inches; trim to length: 1.195 inches. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 90 | Sierra JHC | 6.0 | 1103 | primer: CCI 550; case: Speer; overall loaded length (inches): 1.4670 |
![]() | 90 | Sierra JHC | 6.5 | 1150 | primer: CCI 550; case: Speer; overall loaded length (inches): 1.4670 |
![]() | 90 | Sierra JHC | 7.0 | 1221 | primer: CCI 550; case: Speer; overall loaded length (inches): 1.4670 |
![]() | 90 | Sierra JHC | 7.5 | 1299 | primer: CCI 550; case: Speer; overall loaded length (inches): 1.4670 |
Firearms used for testing these loads was a Ruger SP101 with a 3 1/16-inch barrel. Federal and Speer cases and CCI 500 and CCI 550 primers were used throughout. Case length: 1.200 inches; throat: .313 inch; barrel cylinder gap: .006 inch; groove diameter: .3123 inch. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 158 | X-Treme Plated HP | 7.3 | 915 | COAL: 1.540 inches |
![]() | 158 | X-Treme Plated HP | 8.0 | 980 | COAL: 1.540 inches |
![]() | 158 | X-Treme Plated HP | 8.4 | 1074 | COAL: 1.540 inches |
![]() | 158 | Highborn Flat Point | 7.5 | 922 | COAL: 1.560 inches |
![]() | 158 | Highborn Flat Point | 8.0 | 971 | COAL: 1.560 inches |
![]() | 158 | Highborn Flat Point | 8.5 | 1085 | COAL: 1.560 inches |
in a Ruger GP100 6-inch Barrel Warning! Gun: Ruger GP100; Barrel Length: 6 inches; Primer: CCI 500 (EXCEPT WHERE NOTED); Bullet Diameter: .357 inch; Maximum Case Length: 1.290 inches; Trim-to Length: 1.280 inches; Source: Handloader Magazine issue #300 - Feb/March 2016 | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 105 | Cutting Edge Raptor HP | 9.0 | 1421 | |
![]() | 105 | Cutting Edge Raptor HP | 9.5 | 1455 | |
![]() | 105 | Cutting Edge Raptor HP | 10.0 | 1491 | |
![]() | 105 | Cutting Edge Raptor HP | 10.5 | 1544 | |
![]() | 105 | Cutting Edge Raptor HP | 11.0 | 1578 | |
![]() | 165 | Cutting Edge Solid | 8.0 | 1034 | |
![]() | 165 | Cutting Edge Solid | 9.0 | 1160 | |
Using Cutting Edge bullets Warning! A Ruger GP 100 with a 6-inch barrel was used to test-fire the loads. Starline cases and CCI 500 primers were used throughout, except where noted. Bullet diameter: .357 inch; maximum case length: 1.290 inches; trim-to length: 1.280 inches. Overall loaded length: 1.570 inches. Source: Handloader Magazine issue #298. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 158 | Hornady XTP-HP | 8.2 | 1112 | |
in a Ruger GP100 Warning! Barrel Length: 4 inches; Cases: Starline; Primer: CCI 500; Maximum Overall Loaded Length: 1.590 inches; Maximum Case Length: 1.290 inches; Trim-to Length: 1.280 inches; COAL: 1.580 inches. All loads have been pressure tested between 32,500 and 35,000 psi and are considered maximum. This table illustrates how faster-burning powders do not produce maximum velocities. Source: Handloader Magazine issue #299 / December 2015. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 110 | Hornady XTP | 9.5 | 1676 | start load; COL: 1.590"; 33,700 cup |
![]() | 110 | Hornady XTP | 10.5 | 1800 | max load; COL: 1.590"; 42,400 cup |
![]() | 125 | Hornady XTP | 8.7 | 1529 | start load; COL: 1.590"; 33,000 cup |
![]() | 125 | Hornady XTP | 9.7 | 1647 | max load; COL: 1.590"; 42,000 cup |
![]() | 140 | Hornady XTP | 8.0 | 1396 | start load; COL: 1.590"; 31,300 cup |
![]() | 140 | Hornady XTP | 9.1 | 1534 | max load; COL: 1.590"; 41,000 cup |
![]() | 140 | Hornady FTX | 5.5 | 1091 | start load; COL: 1.600"; 22,000 psi |
![]() | 140 | Hornady FTX | 7.0 | 1358 | max load; COL: 1.600"; 33,800 psi |
![]() | 146 | Speer JHP | 7.5 | 1358 | start load; COL: 1.535"; 33,400 cup |
![]() | 146 | Speer JHP | 8.6 | 1483 | max load; COL: 1.535"; 42,600 cup |
![]() | 158 | Hornady XTP | 7.3 | 1258 | start load; COL: 1.580"; 31,700 cup |
![]() | 158 | Hornady XTP | 8.4 | 1394 | max load; COL: 1.580"; 43,200 cup |
![]() | 170 | Sierra JHC | 6.8 | 1182 | start load; COL: 1.580"; 32,700 cup |
![]() | 170 | Sierra JHC | 7.9 | 1322 | max load; COL: 1.580"; 42,600 cup |
![]() | 180 | Nosler Part | 6.1 | 1025 | start load; COL: 1.575"; 32,700 cup |
![]() | 180 | Nosler Part | 7.2 | 1167 | max load; COL: 1.575"; 41,700 cup |
Pistol (Hodgdon Data) Case: Winchester; barrel length: 10"; twist: 1:18.75"; trim length: 1.285"; primer: Winchester SPM; bullet diam.: .357" (except where otherwise specified in remarks). NEVER EXCEED MAXIMUM LOADS |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 115 | Hornady XTP | 9.0 | 1339 | starting load; 35,200 psi |
![]() | 115 | Hornady XTP | 10.0 | 1497 | maximum load; 37,300 psi |
![]() | 124 | Hornady XTP | 8.3 | 1344 | starting load; 33,500 psi |
![]() | 124 | Hornady XTP | 9.3 | 1429 | maximum load; 37,900 psi |
![]() | 135 | Nosler IPSC | 7.5 | 1230 | starting load; bullet diam.: .357"; 32,300 psi |
![]() | 135 | Nosler IPSC | 8.4 | 1316 | maximum load; bullet diam.: .357"; 36,900 psi |
![]() | 147 | Hornady XTP | 6.5 | 1158 | starting load; COL: 1.140"; 32,100 psi |
![]() | 147 | Hornady XTP | 7.5 | 1254 | maximum load; COL: 1.140"; 38,700 psi |
Hodgdon Pistol Data case: Federal; barrel length: 4"; twist: 1:16"; trim length: .860"; primer: Winchester SP; bullet diam.: .355" and COL: 1.135" (except where otherwise specified in remarks); NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 125 | Speer Gold Dot Jacketed HP | 7.7 | 1228 | sugg. start load; 31,600 psi; 1.135" OAL |
![]() | 125 | Speer Gold Dot Jacketed HP | 8.5 | 1340 | max load; 38,200 psi; 1.135" OAL |
![]() | 147 | Speer TMJ | 7.0 | 1151 | sugg. start load; 31,100 psi; 1.135" OAL |
![]() | 147 | Speer TMJ | 7.8 | 1247 | max load; 38,600 psi; 1.135" OAL |
Lyman Reloading Handbook 49th Edition cases: Federal; trim-to length: .860"; primers: Federal 100; primer size: Small Pistol; Lyman shell holder: No. 15; firearm used: Universal Receiver; barrel length: 4"; twist: 1-16"; groove dia.: .3553" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 124 | Hornady XTP | 8.2 | 1,248 | group: 1.10 inches; muzzle energy: 429 ft-lbs |
![]() | 124 | Hornady XTP | 8.7 | 1,323 | group: 1.10 inches; muzzle energy: 482 ft-lbs; best 124-grain XTP load |
![]() | 125 | Speer Gold Dot HP | 8.7 | 1,384 | group: 1.20 inches; muzzle energy: 532 ft-lbs; best 125-grain Gold Dot load |
![]() | 147 | Hornady XTP | 6.6 | 1,125 | group: 1.75 inches; muzzle energy: 413 ft-lbs |
![]() | 147 | Hornady XTP | 7.0 | 1,128 | group: 1.69 inches; muzzle energy: 415 ft-lbs |
in a Springfield XD Starline cases and Winchester Small Pistol primers were used for all handloads. Springfield Armory XD pistol with a 4-inch barrel and fixed open sights was used for testing. Velocities were taken 12 feet from the muzzle with an Oehler Model 33 or Model 35P chronograph. Accuracy is the average of three, five-shot groups at 15 yards from a sandbag rest. Range temperatures were 62 to 76 degrees Fahrenheit. .355-inch jacketed bullets and .356-inch cast bullets. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 110 | Hornady XTP | 7.6 | 1337 | 17,700 psi |
![]() | 125 | Hornady XTP | 7.0 | 1228 | 18,300 psi |
![]() | 140 | Hornady XTP | 6.4 | 1126 | 17,700 psi |
![]() | 146 | Speer JHP | 5.7 | 1036 | COL: 1.370"; 17,400 psi |
![]() | 158 | Hornady XTP | 5.5 | 965 | 17,000 psi |
![]() | 170 | Sierra JHC | 5.3 | 939 | COL: 1.450"; 17,800 psi |
+P (Hodgdon Pistol Data Maximum Loads) case: Winchester; barrel length: 7.7"; twist: 1:18.75"; trim length: 1.145"; primer: Winchester SP; bullet diam.: .357"; COL: 1.455" (except where otherwise specified in remarks); NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 125 | Hornady HP-XTP | 7.0 | 958 | overall loaded length (inches): 1.445 |
![]() | 140 | Sierra JHC | 6.6 | 929 | overall loaded length (inches): 1.440 |
![]() | 140 | Speer JHP | 6.6 | 932 | overall loaded length (inches): 1.450 |
![]() | 173 | Lyman cast 358429 | 6.0 | 913 | overall loaded length (inches): 1.530 |
+P Loads (Ruger LCR) The +P Special industry pressure limit is 20,000 psi. All loads fired from a Ruger LCR with a 1.875-inch barrel. Winchester +P cases and WSP primers were used throughout. Maximum cartridge length: 1.550 inches; maximum case length: 1.155 inches; case trim-to length: 1.145 inches. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 125 | BBC roundnose | 5.0 | 807 | group (inches): 1.93; power factor: 101; high SD |
![]() | 125 | BBC roundnose | 5.4 | 870 | group (inches): 1.65; power factor: 109 |
![]() | 125 | BBC roundnose | 5.8 | 927 | group (inches): 0.83; power factor: 116; high SD |
in a Custom Taurus Model 80 A custom Taurus Model 80 with a 6-inch Jarvis barrel and a Tasco PDP3 five-minute dot sight were used for all testing. Winchester +P cases and Federal No. 100 primers were used for all handloads, except for the 2.7-grain Bullseye/148-grain DEWC load, which used WSP primers and mixed cases. Accuracy is the average of at least three, five-shot groups at 25 yards, unless otherwise noted. Velocities were measured with an Oehler M-35P chronograph with the front screen 12 feet from the gun's muzzle. All shooting was done double action from a rest. Range temperatures were 58 to 69 degrees Fahrenheit. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 125 | Speer Gold Dot hollowpoint | 7.0 | 851 | overall loaded length (inches): 1.440 |
![]() | 135 | Speer Gold Dot hollowpoint | 7.0 | 986 | overall loaded length (inches): 1.447 |
![]() | 173 | Cast Lyman 358429 | 5.5 | 914 | overall loaded length (inches): 1.522 |
![]() | 173 | Cast Lyman 358429 | 6.0 | 995 | overall loaded length (inches): 1.522 |
in a Smith & Wesson Model 627-5 Data includes +P pressures up to 20,000 psi. Cases were +P Starline. Maximum case length: 1.155 inches; trim to length: 1.145 inches; primer: CCI 500. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 90 | Sierra JHP | 7.8 | 1448 | start load; COL: 1.180"; 27,600 cup |
![]() | 90 | Sierra JHP | 8.4 | 1526 | max load; COL: 1.180"; 32,100 cup |
![]() | 95 | Barnes TAC-XP | 6.6 | 1339 | start load; COL: 1.255"; 25,800 cup |
![]() | 95 | Barnes TAC-XP | 7.3 | 1454 | max load; COL: 1.255"; 32,000 cup |
![]() | 100 | Speer JHP | 7.2 | 1343 | start load; COL: 1.215"; 26,100 cup |
![]() | 100 | Speer JHP | 7.9 | 1446 | max load; COL: 1.215"; 32,100 cup |
![]() | 115 | LRN | 6.5 | 1180 | start load; bullet diam.: .356"; COL: 1.250"; 20,400 cup |
![]() | 115 | LRN | 7.3 | 1289 | max load; bullet diam.: .356"; COL: 1.250"; 30,900 cup |
![]() | 115 | Hornady XTP | 6.5 | 1214 | start load; COL: 1.245"; 25,500 cup |
![]() | 115 | Hornady XTP | 7.1 | 1301 | max load; COL: 1.245"; 31,600 cup |
![]() | 124 | Berry's Bullets HBRN TP | 5.9 | 1140 | start load; bullet diam.: .356"; COL: 1.250"; 22,400 cup |
![]() | 124 | Berry's Bullets HBRN TP | 6.8 | 1286 | max load; bullet diam.: .356"; COL: 1.250"; 31,300 cup |
![]() | 125 | Hornady HAP | 5.8 | 1170 | start load; bullet diam.: .356"; COL: 1.210"; 25,500 cup |
![]() | 125 | Hornady HAP | 6.6 | 1294 | max load; bullet diam.: .356"; COL: 1.210"; 32,400 cup |
![]() | 125 | Sierra FMJ | 6.0 | 1109 | start load; COL: 1.275"; 24,600 cup |
![]() | 125 | Sierra FMJ | 6.9 | 1247 | max load; COL: 1.275"; 32,600 cup |
![]() | 125 | Cast LCN | 6.0 | 1157 | start load; bullet diam.: .356"; COL: 1.230"; 25,100 cup |
![]() | 125 | Cast LCN | 6.8 | 1243 | max load; bullet diam.: .356"; COL: 1.230"; 31,200 cup |
![]() | 130 | Berry's Bullets RN | 5.5 | 1058 | start load; COL: 1.270"; 27,400 cup |
![]() | 130 | Berry's Bullets RN | 6.5 | 1166 | max load; COL: 1.270"; 32,300 cup |
![]() | 135 | LRN | 5.8 | 1087 | start load; bullet diam.: .356"; COL: 1.275"; 26,600 cup |
![]() | 135 | LRN | 6.5 | 1178 | max load; bullet diam.: .356"; COL: 1.275"; 32,200 cup |
![]() | 147 | Hornady XTP | 5.4 | 1042 | start load; COL: 1.260"; 25,300 cup |
![]() | 147 | Hornady XTP | 6.0 | 1119 | max load; COL: 1.260"; 30,900 cup |
![]() | 150 | Sierra JFP | 5.5 | 1040 | start load; bullet diam.: .356"; COL: 1.265"; 26,900 cup |
![]() | 150 | Sierra JFP | 6.0 | 1126 | max load; bullet diam.: .356"; COL: 1.265"; 31,800 cup |
![]() | 150 | Cast LRN | 5.0 | 1076 | start load; bullet diam.: .356"; COL: 1.230"; 27,200 cup |
![]() | 150 | Cast LRN | 6.2 | 1162 | max load; bullet diam.: .356"; COL: 1.230"; 32,200 cup |
Hodgdon Data Case: Remington; twist: 1:16"; primer: Remington 1 1/2, Small Pistol; barrel length: 5"; trim length: .895"; bullet diam.: .355" (except where otherwise specified in remarks). | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 95 | Barnes TAC-XP | 6.0 | 1153 | overall loaded length (inches): 1.255 |
![]() | 95 | Barnes TAC-XP | 6.5 | 1244 | overall loaded length (inches): 1.255 |
![]() | 95 | Barnes TAC-XP | 7.0 | 1358 | overall loaded length (inches): 1.255 |
![]() | 95 | Barnes TAC-XP | 7.5 | 1460 | overall loaded length (inches): 1.255 |
![]() | 147 | Speer GDHP | 5.3 | 992 | overall loaded length (inches): 1.275 |
![]() | 147 | Speer GDHP | 5.8 | 1072 | overall loaded length (inches): 1.275 |
![]() | 147 | Speer GDHP | 6.3 | 1176 | overall loaded length (inches): 1.275 |
![]() | 147 | Speer GDHP | 6.5 | 1203 | overall loaded length (inches): 1.275 |
+P A Kimber Stainless Target II with a 5-inch barrel was used to test fire these loads. Starline cases and Winchester Small Pistol primers were used throughout. Bullet diameter: .355 and .356 inch; maximum overall loaded length: 1.280 inches; maximum case length: .900 inch; and trim-to length; .895 inch. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 122 | Bushwacker flatnose | 5.6 | 1,152 | case: R-P; primer: Federal 100; coefficient of variation (percent): 1.95; group (inches): 1.12; power factor: 140 |
![]() | 125 | Bushwacker roundnose | 5.6 | 1,073 | case: R-P; primer: Federal 100; coefficient of variation (percent): 1.03; group (inches): 1.50; power factor: 134 |
![]() | 125 | Bushwacker semiwadcutter | 5.5 | 1,079 | case: S-V; primer: WSP; coefficient of variation (percent): 1.02; group (inches): 1.03; power factor: 135; good load |
![]() | 125 | Bushwacker semiwadcutter | 5.6 | 1,131 | case: R-P; primer: Federal 100; coefficient of variation (percent): 1.06; group (inches): 2.20; power factor: 141 |
![]() | 125 | Bushwacker semiwadcutter | 5.7 | 1,168 | case: R-P; primer: Federal 100; coefficient of variation (percent): 1.03; group (inches): 1.24; power factor: 146 |
![]() | 125 | Bushwacker semiwadcutter | 6.0 | 1,184 | case: S-V; primer: WSP; coefficient of variation (percent): 0.34; group (inches): 1.44; power factor: 148 |
![]() | 145 | Bushwacker roundnose | 4.1 | 877 | case: R-P; primer: Federal 100; coefficient of variation (percent): 1.48; group (inches): 0.63; power factor: 127; best 145-grain roundnose load |
![]() | 147 | Bushwacker flatnose | 4.4 | 1,058 | case: R-P; primer: Federal 100; coefficient of variation (percent): 1.13; group (inches): 0.95; power factor: 156; good load |
![]() | 158 | Rock Hill roundnose | 5.0 | 1,024 | case: R-P; primer: Federal 100; coefficient of variation (percent): 1.07; group (inches): 1.50; power factor: 162 |
![]() | 158 | Rock Hill roundnose | 5.5 | 1,091 | case: R-P; primer: Federal 100; coefficient of variation (percent): 0.37; group (inches): 1.52; power factor: 172; major power factor |
in a S&W Model 627PC A Smith & Wesson Model 627PC with a 5.5-inch barrel and a Tasco PDP3 sight was used for testing. Velocities were taken 12 feet from the muzzle with an Oehler Model 35P chronograph. Accuracy is based on the average of three, five-shot groups at 25 yards from a sandbag rest. Range temperatures were 62 to 77 degrees Fahrenheit. S-L, Starline; S-V, Super Vel; R-P, Remington-Peters; WSP, Winchester Small Pistol. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 135 | Nosler JHP | 8.5 | 1241 | start load; COL: 1.125"; 25,100 psi |
![]() | 135 | Nosler JHP | 11.5 | 1434 | max load; COL: 1.125"; 31,900 psi |
![]() | 140 | Barnes TAC-XP | 6.4 | 1090 | start load; COL: 1.135"; 25,800 psi |
![]() | 140 | Barnes TAC-XP | 7.0 | 1185 | max load; COL: 1.135"; 31,400 psi |
![]() | 150 | Nosler JHP | 7.5 | 1184 | start load; COL: 1.125"; 26,400 psi |
![]() | 150 | Nosler JHP | 9.3 | 1320 | max load; COL: 1.125"; 33,600 psi |
![]() | 155 | Hornady XTP | 7.5 | 1129 | start load; COL: 1.125"; 24,900 psi |
![]() | 155 | Hornady XTP | 9.3 | 1283 | max load; COL: 1.125"; 31,900 psi |
![]() | 165 | Sierra JHP | 7.3 | 1139 | start load; COL: 1.125"; 29,600 psi |
![]() | 165 | Sierra JHP | 7.8 | 1185 | max load; COL: 1.125"; 33,400 psi |
![]() | 165 | Berry's Bullets FP | 6.9 | 1091 | start load; COL: 1.125"; 24,500 psi |
![]() | 165 | Berry's Bullets FP | 7.8 | 1199 | max load; COL: 1.125"; 32,300 psi |
![]() | 180 | Berry's Bullets FP | 6.3 | 1013 | start load; COL: 1.125"; 26,200 psi |
![]() | 180 | Berry's Bullets FP | 7.5 | 1150 | max load; COL: 1.125"; 33,400 psi |
![]() | 180 | Hornady XTP | 6.5 | 1009 | start load; COL: 1.125"; 25,000 psi |
![]() | 180 | Hornady XTP | 8.0 | 1159 | max load; COL: 1.125"; 32,300 psi |
![]() | 200 | Hornady XTP | 5.0 | 836 | start load; COL: 1.125"; 23,900 psi |
![]() | 200 | Hornady XTP | 6.0 | 954 | max load; COL: 1.125"; 32,500 psi |
Hodgdon Data Case: Hornady; twist: 1:16"; primer: Winchester SP, Small Pistol; barrel length: 4"; trim length: .845"; bullet diam.: .400". This data is intended for use in firearms with barrels which fully support the cartridge in the chamber. Use of this data in firearms which do not fully support the cartridge, such as Glock, may result in bulged cases, ruptured cases, case head separation, or other conditions which may result in damage to the firearm and/or result in injury or death of the shooter and/or bystanders. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 155 | Hornady HP-XTP | 6.6 | 1030 | |
![]() | 155 | Hornady HP-XTP | 7.1 | 1057 | |
![]() | 155 | Hornady HP-XTP | 7.6 | 1084 | |
![]() | 155 | Hornady HP-XTP | 8.1 | 1111 | |
![]() | 155 | Hornady HP-XTP | 9.1 | 1165 | |
![]() | 155 | Hornady HP-XTP | 9.6 | 1191 | maximum load |
![]() | 180 | Hornady HAP or HP-XTP | 4.8 | 776 | |
![]() | 180 | Hornady HAP or HP-XTP | 5.3 | 830 | |
![]() | 180 | Hornady HAP or HP-XTP | 5.9 | 885 | |
![]() | 180 | Hornady HAP or HP-XTP | 6.4 | 939 | |
![]() | 180 | Hornady HAP or HP-XTP | 6.9 | 990 | |
![]() | 180 | Hornady HAP or HP-XTP | 7.5 | 1041 | maximum load |
![]() | 200 | Hornady HAP or HP-XTP | 3.6 | 620 | |
![]() | 200 | Hornady HAP or HP-XTP | 4.1 | 686 | |
![]() | 200 | Hornady HAP or HP-XTP | 4.6 | 751 | |
![]() | 200 | Hornady HAP or HP-XTP | 5.2 | 815 | |
![]() | 200 | Hornady HAP or HP-XTP | 5.7 | 874 | maximum load |
![]() | 155 | Hornady HP-XTP | 8.6 | 1138 | |
Using Hornady Bullets Gun: Glock Model 22; barrel length: 4.35 inches; case: Starline; primer: Winchester Small Pistol; bullet diameter: .400"; COAL: 1.125"; maximum COAL: 1.135"; maximum case length: .850"; trim to length: .845". IMPORTANT: PLEASE VIEW THE SPECIAL NOTES by clicking here. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 155 | Barnes XPB | 5.1 | 939 | minimum |
![]() | 155 | Barnes XPB | 5.6 | 1022 | maximum |
Barnes Reloading Manual #4 case: Winchester; case trim length: .840"; twist rate: 1:16"; primer: WSP; barrel length: 4"; COAL: 1.135"; maximum loads should be used with caution; NOTE: Use a taper crimp on the case mouth. The Barnes #40056 140-grain and #40055 155-grain XPB bullets both have a slight taper on the base to prevent bulging of the case wall once the bullet is seated. Only a slight amount of case mouth belling is needed prior to seating these bullets in the case. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 155 | Hornady HP-XTP | 6.6 | 1030 | overall loaded length (inches): 1.125 |
![]() | 155 | Hornady HP-XTP | 7.1 | 1057 | overall loaded length (inches): 1.125 |
![]() | 155 | Hornady HP-XTP | 7.6 | 1084 | overall loaded length (inches): 1.125 |
![]() | 155 | Hornady HP-XTP | 8.1 | 1111 | overall loaded length (inches): 1.125 |
![]() | 155 | Hornady HP-XTP | 8.6 | 1138 | overall loaded length (inches): 1.125 |
![]() | 155 | Hornady HP-XTP | 9.1 | 1165 | overall loaded length (inches): 1.125 |
![]() | 155 | Hornady HP-XTP | 9.6 | 1191 | overall loaded length (inches): 1.125 |
Load Data A Glock Model 22 with a 4.35-inch barrel was used to test-fire all loads. Starline cases and Winchester Small Pistol primers were used throughout. Bullet diameter: .400 inch; maximum cartridge overall length: 1.135 inches; maximum case length: .850 inch; trim-to length: .845 inch. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 170 | Sierra JHC | 11.0 | 1504 | start load; COL: 1.575"; 29,400 cup |
![]() | 170 | Sierra JHC | 12.5 | 1646 | max load; COL: 1.575"; 38,700 cup |
![]() | 210 | Hornady XTP | 10.0 | 1316 | start load; COL: 1.580"; 31,600 cup |
![]() | 210 | Hornady XTP | 11.0 | 1410 | max load; COL: 1.580"; 38,200 cup |
![]() | 220 | Speer JSP | 9.0 | 1208 | start load; COL: 1.580"; 29,300 cup |
![]() | 220 | Speer JSP | 10.1 | 1311 | max load; COL: 1.580"; 37,700 cup |
![]() | 245 | Cast LSWC | 9.0 | 1208 | start load; COL: 1.630"; 29,200 cup |
![]() | 245 | Cast LSWC | 10.0 | 1293 | max load; COL: 1.630"; 37,900 cup |
Hodgdon Pistol Data Case: Remington; twist: 1:18.75"; primer: Winchester LP; barrel length: 10.125"; trim length: 1.280"; BULLET DIAM.: .410". NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 180 | Barnes XPB FB | 10.0 | 1215 | |
![]() | 180 | Barnes XPB FB | 10.5 | 1266 | |
![]() | 180 | Barnes XPB FB | 11.0 | 1307 | |
![]() | 180 | Barnes XPB FB | 11.5 | 1364 | |
![]() | 180 | Barnes XPB FB | 12.0 | 1406 | |
Using Barnes X Pistol Bullets A 6 1/2-inch barreled Ruger Blackhawk was used to testfire the above loads. Starline cases and CCI 300 Large Pistol primers were used throughout. Bullet diameter: .410 inch; maximum cartridge length: 1.590 inches, tested at 1.580 inches; maximum case length: 1.290 inches; trim-to length: 1.280 inches. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 135 | Cutting Edge Raptor HP | 13.5 | 1702 | |
![]() | 135 | Cutting Edge Raptor HP | 14.0 | 1721 | |
![]() | 180 | Cutting Edge Raptor HP | 11.0 | 1352 | |
![]() | 180 | Cutting Edge Raptor HP | 11.5 | 1371 | |
![]() | 180 | Cutting Edge Raptor HP | 12.0 | 1381 | |
![]() | 180 | Cutting Edge Raptor HP | 12.5 | 1403 | |
Using Cutting Edge bullets Warning! A Ruger New Model Blackhawk (stainless Bisley) with a 5 1/2-inch barrel was used to test-fire these loads. Starline cases were used throughout. CCI 300 primers were used in all loads except where indicated. Bullet diameter: .410 inch; maximum case length: 1.290 inches; trim-to length: 1.280 inches. Overall loaded length: 1.588 inches. Source: Handloader Magazine issue #298. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 200 | Cutting Edge Raptor HP | 11.5 | 1275 | |
![]() | 200 | Cutting Edge Raptor HP | 12.0 | 1300 | |
![]() | 200 | Cutting Edge Raptor HP | 12.5 | 1339 | |
![]() | 200 | Cutting Edge Raptor HP | 13.0 | 1371 | |
![]() | 200 | Cutting Edge Raptor HP | 13.5 | 1394 | |
![]() | 240 | Cutting Edge Solid | 12.0 | 1202 | |
![]() | 240 | Cutting Edge Solid | 12.5 | 1203 | |
![]() | 240 | Cutting Edge Solid | 13.0 | 1237 | |
![]() | 240 | Cutting Edge Solid | 13.5 | 1255 | |
Using Cutting Edge bullets Warning! A Ruger New Model Blackhawk (stainless Bisley) with a 5 1/2-inch barrel was used to test-fire these loads. Starline cases were used throughout. CCI 300 primers were used in all loads, except where indicated. Bullet diameter: .430 inch; maximum case length: 1.285 inches; trim-to length: 1.275 inches. Overall loaded length: 1.610 inches. Source: Handloader Magazine issue #298. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 180 | Hornady XTP | 13.5 | 1499 | start load; COL: 1.600"; 29,400 psi |
![]() | 180 | Hornady XTP | 14.8 | 1604 | max load; COL: 1.600"; 34,600 psi |
![]() | 200 | Nosler JHP | 13.0 | 1440 | start load; bullet diam.: .429"; COL: 1.600"; 30,000 psi |
![]() | 200 | Nosler JHP | 14.3 | 1534 | max load; bullet diam.: .429"; COL: 1.600"; 34,600 psi |
![]() | 210 | Sierra JHC | 12.0 | 1358 | start load; COL: 1.600"; 28,500 psi |
![]() | 210 | Sierra JHC | 13.3 | 1457 | max load; COL: 1.600"; 35,400 psi |
![]() | 220 | Berry's Bullets FP | 9.0 | 894 | start load; COL: 1.610"; 12,300 psi |
![]() | 220 | Berry's Bullets FP | 11.8 | 1189 | max load; COL: 1.610"; 20,300 psi |
![]() | 225 | Speer JHP | 11.2 | 1291 | start load; bullet diam.: .429"; COL: 1.575"; 29,300 psi |
![]() | 225 | Speer JHP | 12.5 | 1402 | max load; bullet diam.: .429"; COL: 1.575"; 35,200 psi |
![]() | 240 | Nosler JHP | 11.0 | 1249 | start load; bullet diam.: .429"; COL: 1.600"; 29,400 psi |
![]() | 240 | Nosler JHP | 12.1 | 1331 | max load; bullet diam.: .429"; COL: 1.600"; 34,500 psi |
![]() | 270 | Speer GDSP | 9.8 | 1112 | start load; bullet diam.: .429"; COL: 1.600"; 27,900 psi |
![]() | 270 | Speer GDSP | 11.0 | 1213 | max load; bullet diam.: .429"; COL: 1.600"; 34,100 psi |
![]() | 280 | Swift JHP | 9.8 | 1076 | start load; COL: 1.700"; 28,400 psi |
![]() | 280 | Swift JHP | 11.0 | 1189 | max load; COL: 1.700"; 34,600 psi |
![]() | 300 | Hornady XTP | 8.5 | 983 | start load; COL: 1.600"; 28,600 psi |
![]() | 300 | Hornady XTP | 9.5 | 1071 | max load; COL: 1.600"; 34,700 psi |
![]() | 325 | Beartooth Bullets LFN GC | 10.0 | 1069 | start load; COL: 1.730"; 28,500 cup |
![]() | 325 | Beartooth Bullets LFN GC | 11.8 | 1195 | max load; COL: 1.730"; 38,700 cup |
![]() | 330 | Beartooth Bullets LFN GC | 9.5 | 1026 | start load; COL: 1.730"; 27,600 cup |
![]() | 330 | Beartooth Bullets LFN GC | 11.3 | 1158 | max load; COL: 1.730"; 38,700 cup |
![]() | 355 | Beartooth Bullets LFN GC | 9.0 | 987 | start load; COL: 1.710"; 28,400 cup |
![]() | 355 | Beartooth Bullets LFN GC | 10.5 | 1096 | max load; COL: 1.710"; 37,800 cup |
Hodgdon Pistol Data Case: Winchester; barrel length: 8.275"; twist: 1:20"; trim length: 1.280"; primer: Remington 2 1/2; bullet diam.: .430" (except where otherwise specified in remarks). NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 240 | Rocky Mountain Reloading FP | 11.0 | 1051 | |
![]() | 240 | Rocky Mountain Reloading FP | 11.5 | 1098 | |
![]() | 240 | Rocky Mountain Reloading FP | 12.0 | 1129 | |
in a New Model Ruger Blackhawk Bisley Warning! Gun: New Model Ruger Blackhawk (Bisley); Barrel Length: 5 1/2 inches; Cases: Starline; Primer: CCI 300; COAL: 1.570 inches; Bullet Diameter: .430 inch; Maximum Case Length: 1.285 inches; Trim-to Length: 1.275 inches; Source: Handloader issue #300 - Feb/March 2016 | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 247 | Lyman 429244 Gas Check | 9.0 | 905 | bullet cast of 3 parts lead/7 parts wheelweights, BHN 6; group (inches): 1.49 |
![]() | 253 | Lyman 429421 | 9.0 | 903 | bullet cast of 3 parts lead/7 parts wheelweights, BHN 6; group (inches): 1.81 |
Lead Cast Loads All loads were fired through the 5.5-inch barrel of a Ruger Super Blackhawk .44 Magnum clamped in a Caldwell Handgun Accurizing Mechanical Machine Rest. Velocities were recorded 10 feet in front of the muzzle with an RCBS AmmoMaster chronograph. Remington cases and Winchester Large Pistol primers were used throughout. Accuracy is the average of two, five-shot groups fired at 25 yards. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 255 | Rim Rock SWC w/gc | 10.5 | 1118 | overall loaded length (inches): 1.663 |
![]() | 255 | Rim Rock SWC w/gc | 11.0 | 1165 | overall loaded length (inches): 1.663 |
![]() | 255 | Rim Rock SWC w/gc | 11.5 | 1218 | overall loaded length (inches): 1.663 |
![]() | 255 | Rim Rock SWC w/gc | 12.0 | 1266 | overall loaded length (inches): 1.663 |
Using Rim Rock bullets Warning! A Smith & Wesson Model 629-1 with a 6-inch barrel was used to test-fire the above loads. Starline cases and CCI 300 primers were used throughout. Bullet diameter: .430 inch; maximum case length: 1.285 inches; trim-to length: 1.275 inches. Source: Handloader issue #298. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 263 | Lyman 429255GC | 10.0 | 1003 | overall loaded length (inches): 1.675 |
![]() | 263 | Lyman 429255GC | 11.0 | 1054 | overall loaded length (inches): 1.675 |
![]() | 263 | Lyman 429255GC | 12.0 | 1115 | overall loaded length (inches): 1.675 |
Handloading Data A Smith & Wesson Model 69 with a 4 1/4-inch barrel was used to test fire these loads. Starline cases were used throughout. Maximum case length: 1.285 inches; trim-to length: 1.275 inches; primer: CCI 300 (except where otherwise specified in remarks). | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 250 | Lyman 429244 GC | 9.0 | 905 | group (inches): 1.49; primer: Winchester Large Pistol |
CCI 350 Magnum Pistol primers used except where otherwise specified in remarks; all loads used Federal cases and were fired through a Ruger Super Blackhawk with a 5.5-inch barrel; all groups were five shots fired at 25 yards |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 240 | Rim Rock SWC-HP w/gc | 9.0 | 1129 | |
![]() | 240 | Rim Rock SWC-HP w/gc | 9.5 | 1180 | |
![]() | 255 | Rim Rock SWC w/gc | 9.0 | 1122 | |
![]() | 255 | Rim Rock SWC w/gc | 9.5 | 1164 | |
+P data Using Rim Rock bullets Warning! These handloads generate +P pressures and exceed SAAMI guidelines for the .44 Special that are currently established at 15,500 psi. These loads should ONLY BE USED IN Smith & Wesson Model 1950 Target/Model 24, Ruger New Model Blackhawk, Freedom Arms Model 97 and guns designed to handle pressures up to 25,000 psi. A Ruger Blackhawk, Clements Custom No. 5 with a 5 1/2-inch Douglas Premium barrel was used to test-fire these loads. Starline cases and CCI 300 primers were used throughout. Bullet diameter: .430 inch; maximum case length: 1.160 inches; trim-to length: 1.150 inches. Overall loaded length: 1.540 inches. Source: Handloader Magazine issue #298. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 185 | Barnes XPB | 6.0 | 848 | minimum |
![]() | 185 | Barnes XPB | 7.0 | 979 | maximum |
Barnes Reloading Manual #4 case: Winchester; case trim length: 0.888"; twist rate: 1:16"; primer: WLP; barrel length: 5"; COAL: 1.235"; maximum loads should be used with caution; NOTE: Use a taper crimp on the case mouth. The Barnes #45185 185-grain XPB bullet has a slight taper on the base to prevent bulging case wall once the bullet is seated. Only a slight amount of case mouth belling is needed prior to seating the bullet in the case. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 180 | LFP | 6.5 | 788 | start load; bullet diam.: .452"; COL: 1.140"; 9,800 cup |
![]() | 180 | LFP | 8.0 | 1015 | max load; bullet diam.: .452"; COL: 1.140"; 16,900 cup |
![]() | 185 | Hornady JSWC | 7.2 | 919 | start load; COL: 1.135"; 11,300 cup |
![]() | 185 | Hornady JSWC | 8.2 | 1044 | max load COL: 1.135"; 17,000 cup |
![]() | 200 | Speer JHP | 7.0 | 918 | start load; COL: 1.155"; 13,300 cup |
![]() | 200 | Speer JHP | 7.8 | 1013 | max load; COL: 1.155"; 16,900 cup |
![]() | 230 | LRN | 6.0 | 747 | start load; bullet diam.: .452"; COL: 1.200"; 12,000 cup |
![]() | 230 | LRN | 6.8 | 875 | max load; bullet diam.: .452"; COL: 1.200"; 16,800 cup |
![]() | 230 | Hornady FMJ FP | 6.3 | 848 | start load; COL: 1.200"; 14,100 cup |
![]() | 230 | Hornady FMJ FP | 6.8 | 908 | max load; COL: 1.200"; 17,200 cup |
Hodgdon Data Case: Winchester; twist: 1:16"; primer: Federal 150, Large Pistol; barrel length: 5"; trim length: .893"; bullet diam.: .451" (except where otherwise specified in remarks) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 230 | Speer TMJ | 6.4 | 816 | sugg. start load; 1.275" OAL; 12,800 cup |
![]() | 230 | Speer TMJ | 7.0 | 922 | max load; 1.275" OAL; 17,100 cup |
Lyman Reloading Handbook 49th Edition cases: Remington, Federal; trim-to length: .888"; primers: Remington 2 1/2; primer size: Large Pistol; Lyman shell holder: No. 2; firearm used: Universal Receiver; barrel length: 5"; twist: 1-16"; groove dia.: .450" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 185 | Hornady HP-XTP or FMJ SWC | 7.2 | 771 | |
![]() | 185 | Hornady HP-XTP or FMJ SWC | 7.7 | 830 | |
![]() | 185 | Hornady HP-XTP or FMJ SWC | 8.2 | 899 | |
![]() | 185 | Hornady HP-XTP or FMJ SWC | 8.7 | 969 | |
![]() | 185 | Hornady HP-XTP or FMJ SWC | 9.1 | 1035 | maximum load |
Using 185 GR Hornady Bullets Gun: Ruger SR1911; barrel length: 5 inches; case: Starline; primer: Winchester Large Pistol; bullet diameter: .451"; HP-XTP COAL: 1.225"; FMJ SWC COAL: 1.135"; maximum COAL: 1.275"; maximum case length: .898"; trim to length: .888". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 200 | Hornady HP-XTP | 6.6 | 756 | |
![]() | 200 | Hornady HP-XTP | 7.1 | 811 | |
![]() | 200 | Hornady HP-XTP | 7.6 | 879 | |
![]() | 200 | Hornady HP-XTP | 8.1 | 945 | |
![]() | 200 | Hornady HP-XTP | 8.6 | 1009 | maximum load |
Using 200 GR Hornady Bullets Gun: Ruger SR1911; barrel length: 5 inches; case: Starline; primer: Winchester Large Pistol; bullet diameter: .451"; HP-XTP COAL: 1.230"; SWC COAL: 1.200"; L-C/T COAL: 1.225"; maximum COAL: 1.275"; maximum case length: .898"; trim to length: .888". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 230 | Hornady HP-XTP or HAP | 6.1 | 741 | |
![]() | 230 | Hornady HP-XTP or HAP | 6.4 | 776 | |
![]() | 230 | Hornady HP-XTP or HAP | 6.7 | 819 | |
![]() | 230 | Hornady HP-XTP or HAP | 7.1 | 861 | |
![]() | 230 | Hornady HP-XTP or HAP | 7.4 | 901 | maximum load |
Using 230 GR Hornady Bullets Gun: Ruger SR1911; barrel length: 5 inches; case: Starline; primer: Winchester Large Pistol; bullet diameter: .451"; HP-XTP and HAP COAL: 1.230"; LRN COAL: 1.245"; maximum COAL: 1.275"; maximum case length: .898"; trim to length: .888". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 230 | Nosler Sporting Handgun Pistol FMJ or JHP | 6.9 | 896 | max |
![]() | 230 | Nosler Sporting Handgun Pistol FMJ or JHP | 6.4 | 839 | |
![]() | 230 | Nosler Sporting Handgun Pistol FMJ or JHP | 5.9 | 771 | most accurate load tested |
Using Nosler Bullets Handgun; case: Winchester; primer: Fed. 150; barrel length/make: 5" Douglas; twist: 1-16"; bullets: 185 GR Nosler Custom Competition JHP or 230 GR Nosler Sporting Handgun Pistol FMJ or JHP; OACL: 1.200"; maximum OACL: 1.275". Use Maximum Loads with Caution | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 150 | Cutting Edge Raptor HP | 9.0 | 1231 | |
![]() | 150 | Cutting Edge Raptor HP | 9.2 | 1266 | |
+P (23,000 psi) Using Cutting Edge bullets Warning! A Ruger SR1911 with a 5-inch barrel was used to test-fire these loads. Starline cases and Remington 2 1/2 Large Pistol primers were used throughout. Bullet diameter: .451/.452 inch; maximum case length: .898 inch; trim-to length: .893 inch. Overall loaded length: 1.215 inches. Source: Handloader Magazine issue #298. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 200 | Hornady XTP | 7.8 | 909 | group (inches): 2.74; muzzle energy (ft-lb): 367 |
![]() | 230 | Hornady XTP | 6.8 | 856 | group (inches): 1.71; muzzle energy (ft-lb): 374 |
Taurus Stellar Tracker Taurus Stellar Tracker with a 4-inch barrel and open sights was used for testing. Accuracy is based on the average of three, five-shot groups at 15 yards from a benchrest. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 285 | RCBS cast 45-270-SAA | 9.7 | 1107 | overall loaded length (inches): 1.665; This load exceeds industry pressure limits for the .45 Colt (currently established at 14,000 psi) but does not exceed 20,000 psi. Use only in modern guns designed for this pressure level. |
higher pressure loads Warning! A Browning Model 1885 Traditional Hunter with a 24-inch barrel was used to test-fire these loads. Starline cases and CCI 300 primers were used throughout. Bullet diameter: .452 inch; maximum case length: 1.285 inches; case trim-to length: 1.275 inches. Source: Rifle Single Shot Special Edition 2015. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 240 | Sierra JHC | 12.3 | 1179 | start load; COL: 1.600"; 21,900 cup |
![]() | 240 | Sierra JHC | 13.7 | 1292 | max load; COL: 1.600"; 29,200 cup |
![]() | 250 | Hornady XTP | 12.0 | 1129 | start load; COL: 1.600"; 22,100 cup |
![]() | 250 | Hornady XTP | 13.4 | 1252 | max load; COL: 1.600"; 29,900 cup |
![]() | 260 | Nosler Part | 11.5 | 1068 | start load; bullet diam.: .451"; COL: 1.650"; 24,500 cup |
![]() | 260 | Nosler Part | 12.7 | 1188 | max load; bullet diam.: .451"; COL: 1.650"; 30,000 cup |
![]() | 300 | Speer JFP | 11.2 | 1005 | start load; bullet diam.: .451"; COL: 1.650"; 21,100 cup |
![]() | 300 | Speer JFP | 12.5 | 1136 | max load; bullet diam.: .451"; COL: 1.650"; 29,200 cup |
(Ruger, Freedom Arms & T/C Only) (Hodgdon Data) The data is intended for 45 Colt Ruger Blackhawk, Freedom Arms, and Thompson Center Contender/Encore Handguns. Max pressure, 30,000 CUP. DO NOT USE THIS DATA IN ANY OTHER MAKE OR MODEL OF FIREARM. Case: Winchester; twist: 1:16"; primer: Winchester LP; barrel length: 7.25"; trim length: 1.280"; bullet diam.: .452" (except where otherwise specified in remarks). NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 225 | Hornady FTX | 8.1 | 850 | |
![]() | 225 | Hornady FTX | 8.6 | 900 | |
![]() | 225 | Hornady FTX | 9.1 | 950 | |
![]() | 225 | Hornady FTX | 9.6 | 1000 | maximum load |
Handgun (FTX Data) max. case length: 1.230"; case trim length: 1.215"; bullet diameter: .452"; pistol: Ruger Blackhawk; barrel: 7 1/2" 1 in 16" twist; case: Starline; primer: WLP; bullet: 225 GR. FTX; maximum COL: 1.645"; sectional density: .157; ballistic coefficient: .140; use maximum loads with caution | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 285 | RCBS 45-270-SAA cast | 9.5 | 927 | |
![]() | 285 | RCBS 45-270-SAA cast | 10.0 | 972 | |
![]() | 285 | RCBS 45-270-SAA cast | 10.5 | 999 | |
![]() | 285 | RCBS 45-270-SAA cast | 11.1 | 1048 | |
in a Ruger New Model Blackhawk These loads exceed industry pressure guidelines and should be used ONLY in modern guns intended to handle pressures of 23,000 psi. All loads were fired in a Ruger New Model Blackhawk .45 (.357 Blackhawk frame) with a 5 1/2-inch barrel. Starline cases and Winchester Large Pistol primers were used throughout. Cartridge overall loaded length: 1.650 inches. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 240 | Sierra JHC | 12.0 | 1007 | overall loaded length (inches): 1.5825 |
![]() | 240 | Sierra JHC | 12.5 | 1072 | overall loaded length (inches): 1.5825 |
![]() | 240 | Hornady XTP-MAG | 12.5 | 1066 | overall loaded length (inches): 1.655 |
![]() | 250 | Hornady HP-XTP | 11.0 | 925 | overall loaded length (inches): 1.5975 |
![]() | 250 | Hornady HP-XTP | 11.5 | 962 | overall loaded length (inches): 1.5975 |
![]() | 250 | Hornady HP-XTP | 12.0 | 1010 | overall loaded length (inches): 1.5975 |
![]() | 318 | Lyman cast 454629 | 10.5 | 946 | overall loaded length (inches): 1.6535; potentially the most accurate powder with that bullet |
![]() | 318 | Lyman cast 454629 | 11.3 | 1020 | overall loaded length (inches): 1.6535 |
in a Ruger New Model Blackhawk (+P Pressure 23,000 psi) These loads exceed SAAMI pressure limits for the .45 Colt and should only be used in Ruger New Model Blackhawk revolvers, or firearms of similar strength. Barrel length: 5 1/2 inches; Starline cases used throughout. CCI 300 primers used in all loads except with H-110 powder, where Federal 155 primers were used. Temperature during testing was 70 to 85 degrees Fahrenheit. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 280 | RCBS cast 45-270-SAA | 9.5 | 965 | overall loaded length (inches): 1.653 |
in a Ruger New Model Blackhawk (Std. Pressure 14,000 psi) Loads fired in a 5 1/2-inch barrel. Starline cases and CCI 300 primers used throughout. Temperature during testing ranged from 70 to 92 degrees Fahrenheit. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 225 | Hornady FTX | 8.1 | 846 | |
![]() | 225 | Hornady FTX | 8.6 | 893 | |
![]() | 225 | Hornady FTX | 9.1 | 940 | |
![]() | 225 | Hornady FTX | 9.6 | 988 | maximum load |
Revolver Using 225 GR Hornady Bullets Gun: Ruger New Model (Bisley) Blackhawk; barrel length: 5 1/2 inches; case: Starline; primer: Winchester WLP; bullet diameter: .452"; COAL: 1.645; maximum COAL: 1.600"; maximum case length: 1.285"; trim to length: 1.215"; |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 185 | Hornady Jacketed HP | 6.7 | 919 | start load; 17,400 psii; 1.060" OAL |
![]() | 185 | Hornady Jacketed HP | 7.5 | 1031 | max load; 22,400 psii; 1.060" OAL |
![]() | 200 | Speer Jacketed HP | 6.2 | 810 | start load; 15,100 psi; 1.080" OAL |
![]() | 200 | Speer Jacketed HP | 7.0 | 951 | max load; 21,200 psi; 1.080" OAL |
![]() | 230 | Speer TMJ | 5.6 | 814 | start load; 17,800 psi; 1.135" OAL |
![]() | 230 | Speer TMJ | 6.3 | 885 | max load; 20,300 psi; 1.135" OAL |
![]() | 225 | Lyman Cast #452374 | 5.7 | 845 | start load; 17,800 psi; 1.135" OAL |
![]() | 225 | Lyman Cast #452374 | 6.4 | 953 | max load; 21,600 psi; 1.135" OAL |
Lyman Reloading Handbook 49th Edition cases: Winchester; trim-to length: .755"; primers: Winchester WSP; primer size: Small Pistol; Lyman Shell Holder: No. 2; cast bullets sized to .451" dia.; firearm used: Universal Receiver; barrel length: 5"; twist: 1-16"; groove dia.: .450" (Lyman 49th Reloading Handbook) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 185 | Hornady XTP | 6.5 | 923 | starting load; psi: 16,400 |
![]() | 185 | Hornady XTP | 7.5 | 1,075 | maximum load; psi: 22,500 |
![]() | 200 | Speer GDHP | 6.0 | 892 | starting load; psi: 19,100 |
![]() | 200 | Speer GDHP | 6.8 | 1,000 | maximum load; psi: 22,300 |
Hodgdon Pistol Data Never exceed the loads listed here. case: Speer; BBL: 5 inches; PR: Winchester SP; twist: 1:16 inches; trim: .750 inch |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 185 | Hornady Jacketed Semi-Wadcutter | 7.2 | 919 | starting load; dia: .451"; COL: 1.195"; 11,300 cup |
![]() | 185 | Hornady Jacketed Semi-Wadcutter | 8.4 | 1,120 | maximum load; dia: .451"; COL: 1.195"; 20,100 cup |
![]() | 200 | Speer Jacketed Hollow Point | 7.0 | 918 | starting load; dia: .451"; COL: 1.155"; 13,300 cup |
![]() | 200 | Speer Jacketed Hollow Point | 8.1 | 1,053 | maximum load; dia: .451"; COL: 1.155"; 20,100 cup |
![]() | 230 | Hornady Full Metal Jacket Flat Point | 6.3 | 848 | starting load; dia: .451"; COL: 1.200"; 14,100 cup |
![]() | 230 | Hornady Full Metal Jacket Flat Point | 7.3 | 959 | maximum load; dia: .451"; COL: 1.200"; 19,800 cup |
Hodgdon Pistol Data case: Winchester; twist: 1:16"; barrel: 5"; trim: .893"; primer: Federal 150; NEVER EXCEED MAXIMUM LOADS |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 240 | Sierra JHC | 14.0 | 1375 | start load; bullet diam.: .452"; COL: 1.680"; 23,800 cup |
![]() | 240 | Sierra JHC | 16.0 | 1541 | max load; bullet diam.: .452"; COL: 1.680"; 36,200 cup |
![]() | 250 | Nosler JHP | 14.5 | 1377 | start load; bullet diam.: .451"; COL: 1.700"; 26,400 cup |
![]() | 250 | Nosler JHP | 15.5 | 1492 | max load; bullet diam.: .451"; COL: 1.700"; 36,100 cup |
![]() | 260 | Speer JHP | 14.0 | 1353 | start load; bullet diam.: .451"; COL: 1.675"; 28,200 cup |
![]() | 260 | Speer JHP | 15.0 | 1443 | max load; bullet diam.: .451"; COL: 1.675"; 36,600 cup |
Hodgdon Pistol Data Case: Freedom Arms; twist: 1:24"; primer: Winchester SR; barrel length: 9.375"; trim length: 1.380". NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 240 | Cutting Edge Raptor HP | 18.0 | 1538 | |
![]() | 240 | Cutting Edge Raptor HP | 19.0 | 1553 | |
![]() | 240 | Cutting Edge Raptor HP | 20.0 | 1588 | |
Using Cutting Edge bullets Warning! A Freedom Arms Model 83 with a 7 1/2-inch barrel was used to test-fire these loads. Starline cases and Remington 7 1/2 Small Rifle primers were used throughout. Bullet diameter: 452 inch; maximum case length: 1.383 inches; trim-to length: 1.373 inches. Overall loaded length: 1.748 inches. Source: Handloader Magazine issue #298. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 185 | Sierra Match FMJ | 12.0 | 1,439 | |
![]() | 185 | Sierra Match FMJ | 13.4 | 1,536 | |
![]() | 185 | Sierra JHP | 13.0 | 1,443 | |
![]() | 185 | Sierra JHP | 13.4 | 1,477 | |
![]() | 200 | XTP | 13.0 | 1,369 | |
![]() | 200 | XTP | 13.5 | 1,460 | |
![]() | 200 | Sierra | 13.2 | 1,415 | |
![]() | 200 | Gold Dot | 13.0 | 1,350 | expands but does not penetrate as deeply as XTP |
![]() | 230 | XTP | 10.5 | 1,222 | |
Be careful with AAC-7 loads. It seems the burn rate has changed, and there appears to be more than one generation currently in the supply line. On the other hand, the powder gives excellent results and is among the best choices for the .460 Rowland. The Sierra bullet gave the best accuracy results. The XTP bullet would be the toughest for penetration on game, expanding well and holding together. The Nosler gives a bit more penetration than the Sierra but by a small margin, and the Nosler is very accurate. Begin at least 10 percent below powder charge. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 185 | HDY JSWC | 12.0 | 1,413 | COL: 1.240"; cup: 34,700; starting load |
![]() | 185 | HDY JSWC | 13.5 | 1,503 | COL: 1.240"; cup: 38,800; maximum load |
![]() | 200 | SPR JHP | 12.0 | 1,372 | COL: 1.225"; cup: 34,300; starting load |
![]() | 200 | SPR JHP | 13.8 | 1,456 | COL: 1.225"; cup: 39,400; maximum load |
![]() | 230 | HDY XTP | 10.0 | 1,207 | COL: 1.270"; cup: 32,200; starting load |
![]() | 230 | HDY XTP | 12.0 | 1,336 | COL: 1.270"; cup: 39,200; maximum load |
Hodgdon Pistol Data case: Starline; BBL: 5"; pr: Winchester LP; twist: 1:16"; bullet diam.: .451"; NEVER Exceed the Loads Listed Here |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 200 | Barnes XPB | 20.0 | 1,752 | starting load; dia.: .451; COL: 2.320"; 30,300 psi |
![]() | 200 | Barnes XPB | 27.0 | 2,161 | maximum load; dia.: .451; COL: 2.320"; 56,500 psi |
Hodgdon Pistol Data case: Starline; bbl: 10.743"; PR: Winchester LRM; twist: 1:20"; trim: 1.790" - This data was developed with Starline Brass which was designed for use with large rifle type primers. Some brands of brass were designed solely for use with large pistol primers. Check with the manufacturer of the brass for correct primer usage. Rifle primers used in a pistol primer pocket cannot be seated sufficiently deep to be below flush with the casehead, which could result in sympathetic ignition of other rounds in the cylinder during recoil. Such use may result in damage to the firearm and/or result in injury or death of the shooter and/or bystander. Never exceed loads listed. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 325 | Hornady XTP | 13.0 | 1,217 | starting load; C.O.L. = 1.620 inches; 38,800 psi |
![]() | 325 | Hornady XTP | 14.5 | 1,330 | maximum load; C.O.L. = 1.620 inches; 47,000 psi |
![]() | 370 | CPB LFP | 12.0 | 1,162 | starting load; C.O.L. = 1.640 inches; 36,300 psi |
![]() | 370 | CPB LFP | 13.8 | 1,272 | maximum load; C.O.L. = 1.640 inches; 45,800 psi |
![]() | 400 | Hornady XTP | 9.5 | 965 | starting load; C.O.L. = 1.620 inches; 37,900 psi |
![]() | 400 | Hornady XTP | 11.0 | 1,082 | maximum load; C.O.L. = 1.620 inches; 46,900 psi |
![]() | 405 | CPB (w/GCK) | 10.0 | 1,023 | starting load; C.O.L. = 1.620 inches; 33,400 psi |
![]() | 405 | CPB (w/GCK) | 11.8 | 1,140 | maximum load; C.O.L. = 1.620 inches; 46,100 psi |
All bullets measure .475 inch. Winchester Large Pistol primers used throughout in Hornady cases. Barrel length: 7.5 inches with one-in-18-inch twist. Trim cases to 1.275 inches. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 325 | Hornady XTP | 13.0 | 1217 | start load; COL: 1.620"; 38,800 psi |
![]() | 325 | Hornady XTP | 14.5 | 1330 | max load; COL: 1.620"; 47,000 psi |
![]() | 355 | Beartooth Bullets LFN GC | 13.0 | 1221 | start load; bullet diam.: .476"; COL: 1.630"; 37,300 psi |
![]() | 355 | Beartooth Bullets LFN GC | 14.5 | 1313 | max load; bullet diam.: .476"; COL: 1.630"; 45,400 psi |
![]() | 370 | Cast Performance Bullets LFP | 12.0 | 1162 | start load; COL: 1.640"; 36,300 psi |
![]() | 370 | Cast Performance Bullets LFP | 13.8 | 1272 | max load; COL: 1.640"; 45,800 psi |
![]() | 400 | Hornady XTP | 9.5 | 965 | start load; COL: 1.620"; 37,900 psi |
![]() | 400 | Hornady XTP | 11.0 | 1082 | max load; COL: 1.620"; 46,900 psi |
![]() | 405 | Cast Performance Bullets (w/GCK) | 10.0 | 1023 | start load; COL: 1.620"; 33,400 psi |
![]() | 405 | Cast Performance Bullets (w/GCK) | 11.8 | 1140 | max load; COL: 1.620"; 46,100 psi |
![]() | 420 | Beartooth Bullets LFN GC | 9.8 | 994 | start load; bullet diam.: .476"; COL: 1.640"; 37,500 psi |
![]() | 420 | Beartooth Bullets LFN GC | 11.0 | 1080 | max load; bullet diam.: .476"; COL: 1.640"; 46,600 psi |
Hodgdon Data Case: Hornady; twist: 1:18"; primer: Winchester LP; barrel length: 7 1/2"; trim length: 1.275"; bullet diam.: .475" (except where otherwise specified in remarks). NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 325 | XTP | 13.0 | 1217 | start load; min OAL: 1.620 |
![]() | 325 | XTP | 14.5 | 1330 | never exceed; min OAL: 1.620; 47,000 psi |
![]() | 370 | Lead | 12.0 | 1162 | start load; min OAL: 1.640 |
![]() | 370 | Lead | 13.8 | 1272 | never exceed; min OAL: 1.640; 45,800 psi |
![]() | 400 | XTP | 9.5 | 965 | start load; min OAL: 1.620 |
![]() | 400 | XTP | 11.0 | 1082 | never exceed; min OAL: 1.620; 46,900 psi |
Lee Precision Data CAUTION: With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. Large Pistol primer. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 325 | Hunters Supply Cast FP | 15.0 | 1222 | |
![]() | 325 | Hunters Supply Cast FP | 15.5 | 1248 | |
![]() | 325 | Hunters Supply Cast FP | 16.0 | 1280 | |
![]() | 325 | Hunters Supply Cast FP | 16.5 | 1312 | |
![]() | 325 | Hunters Supply Cast FP | 17.0 | 1339 | maximum load |
Gun: Magnum Research BFR; barrel length: 8 1/8 inches; case: IMI; primer: Winchester Large Pistol; bullet diameter: 500"/.501"; 300 GR Speer GDHP COAL: 1.580", 325 GR UCHP COAL: 1.575"; 325 Hunters Supply Cast FP COAL: 1.625" (1.580" for Auto Loading Pistols); maximum COAL: 1.575"; maximum case length: 1.285"; trim to length: 1.280". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 300 | Hornady XTP-MAG | 16.0 | 1239 | |
![]() | 300 | Hornady XTP-MAG | 16.5 | 1269 | |
![]() | 300 | Hornady XTP-MAG | 17.0 | 1308 | |
![]() | 300 | Hornady XTP-MAG | 17.5 | 1338 | maximum load |
Using Hornady Bullets Gun: Magnum Research BFR; barrel length: 8 1/8 inches; case: IMI; primer: Winchester Large Pistol; bullet diameter: 500"/.501"; 300 gr Hornady XTP-MAG COAL: 1.580"; maximum COAL: 1.575"; maximum case length: 1.285"; trim to length: 1.280". |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 275 | Barnes XPB | 20.0 | 1594 | minimum; COAL: 2.085" |
![]() | 275 | Barnes XPB | 24.5 | 1824 | maximum; COAL: 2.085" |
![]() | 325 | Barnes XPB | 22.5 | 1599 | minimum; COAL: 2.290" |
![]() | 325 | Barnes XPB | 24.5 | 1684 | maximum; COAL: 2.290" |
![]() | 375 | Barnes XPB | 18.0 | 1347 | minimum; COAL: 2.290" |
![]() | 375 | Barnes XPB | 21.0 | 1487 | maximum; COAL: 2.290" |
Barnes Reloading Manual #4 case: Starline; case trim length: 1.615"; twist rate: 1:15"; primer: Federal GM210M; barrel length: 10"; maximum loads should be used with caution; NOTE: Roll crimp the case mouth into the cannelure. Brass for this cartridge has been made with both Large Pistol and Large Rifle primer pockets. Our data was developed using Large Rifle primers. The primer pockets for Large Rifle primers are the same diameter, but slightly deeper than the primer pockets designed for Large Pistol primers. Cases with the shallower primer pocket can be reamed deeper to accept Large Rifle primers. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 275 | Barnes XPB | 20.0 | 1594 | start load; COL: 2.085"; 35,000 psi |
![]() | 275 | Barnes XPB | 24.5 | 1824 | max load; COL: 2.085"; 48,900 psi |
![]() | 325 | Barnes XPB | 22.5 | 1599 | start load; COL: 2.290"; 43,300 psi |
![]() | 325 | Barnes XPB | 24.5 | 1684 | max load; COL: 2.290"; 49,500 psi |
![]() | 350 | Hornady XTP | 21.0 | 1482 | start load; COL: 1.985"; 41,400 psi |
![]() | 350 | Hornady XTP | 23.0 | 1602 | max load; COL: 1.985"; 50,000 psi |
![]() | 370 | Cast Performance Bullets LGC | 21.5 | 1476 | start load; COL: 2.020"; 42,000 psi |
![]() | 370 | Cast Performance Bullets LGC | 23.3 | 1576 | max load; COL: 2.020"; 50,000 psi |
![]() | 375 | Barnes XPB | 18.0 | 1347 | start load; COL: 2.290"; 38,300 psi |
![]() | 375 | Barnes XPB | 21.0 | 1487 | max load; COL: 2.290"; 49,600 psi |
![]() | 385 | Rem. HP | 20.0 | 1398 | start load; COL: 2.150"; 39,900 psi |
![]() | 385 | Rem. HP | 23.0 | 1523 | max load; COL: 2.150"; 49,300 psi |
![]() | 400 | Sierra JSP | 18.0 | 1274 | start load; COL: 2.050"; 36,500 psi |
![]() | 400 | Sierra JSP | 22.0 | 1458 | max load; COL: 2.050"; 49,000 psi |
![]() | 440 | Cast Performance Bullet LGC | 18.5 | 1300 | start load; COL: 2.025"; 41,900 psi |
![]() | 440 | Cast Performance Bullet LGC | 20.7 | 1393 | max load; COL: 2.025"; 50,500 psi |
![]() | 500 | Hornady SP | 16.0 | 1115 | start load; COL: 2.065"; 39,200 psi |
![]() | 500 | Hornady SP | 18.5 | 1222 | max load; COL: 2.065"; 50,400 psi |
Hodgdon Pistol Data case: Starline; twist: 1:18"; barrel: 10"; trim: 1.615"; primer: Winchester LR; dia: .500"; NEVER EXCEED MAXIMUM LOADS |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 350 | Hornady XTP | 17.0 | 1,313 | starting load; COL: 1.740"; 39,900 PSI |
![]() | 350 | Hornady XTP | 19.0 | 1,423 | maximum load; COL: 1.740"; 47,200 PSI |
![]() | 370 | Cast Performance Bullet LGC | 17.0 | 1,284 | starting load; COL: 1.740"; 38,500 PSI |
![]() | 370 | Cast Performance Bullet LGC | 19.2 | 1,391 | maximum load; COL: 1.740"; 48,200 PSI |
![]() | 400 | Cast Performance Bullet LGC | 15.0 | 1,189 | starting load; COL: 1.750"; 36,600 PSI |
![]() | 400 | Cast Performance Bullet LGC | 17.6 | 1,310 | maximum load; COL: 1.750"; 48,600 PSI |
![]() | 440 | Cast Performance Bullet LGC | 14.0 | 1,119 | starting load; COL: 1.740"; 36,600 PSI |
![]() | 440 | Cast Performance Bullet LGC | 16.5 | 1,226 | maximum load; COL: 1.740"; 48,800 PSI |
Hodgdon Pistol Data case: Freedom Arms; barrel length: 9"; twist: 1:20"; trim length: 1.360"; primer: Federal 210; bullet diam: .500"; NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 370 | Oregon Trail GC | 15.5 | 1128 | 3 shots/25 yds: 5/8" |
![]() | 370 | Cast Performance Bullet Co. GC | 15.5 | 1126 | 3 shots/25 yds: 1 1/2" |
![]() | 400 | Cast Performance Bullet Co. GC | 15.5 | 1132 | 3 shots/25 yds: 5/8" |
in a Freedom Arms 83 7 1/2-Inch Freedom Arms Model 83 7 1/2"; 4X Leupold |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 180 | Sierra JHC | 8.5 | 1,221 | starting load; COL: 1.260"; 31,000 psi |
![]() | 180 | Sierra JHC | 9.5 | 1,287 | maximum load; COL: 1.260"; 34,600 psi |
![]() | 200 | Hornady FMJ | 7.0 | 1,034 | starting load; COL: 1.260"; 23,900 psi |
![]() | 200 | Hornady FMJ | 8.2 | 1,172 | maximum load; COL: 1.260"; 35,000 psi |
Hodgdon Data case: Winchester; barrel length: 5"; twist: 1:16"; trim length: .987"; primer: Winchester LP; bullet diam.: .400"; NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 180 | Hornady HAP, HP-XTP, FMJ-FP ENC | 6.4 | 948 | |
![]() | 180 | Hornady HAP, HP-XTP, FMJ-FP ENC | 6.9 | 1001 | |
![]() | 180 | Hornady HAP, HP-XTP, FMJ-FP ENC | 7.3 | 1060 | |
![]() | 180 | Hornady HAP, HP-XTP, FMJ-FP ENC | 7.8 | 1125 | |
![]() | 180 | Hornady HAP, HP-XTP, FMJ-FP ENC | 8.2 | 1178 | maximum load |
![]() | 200 | Hornady HP-XTP or HAP | 5.7 | 888 | |
![]() | 200 | Hornady HP-XTP or HAP | 6.1 | 930 | |
![]() | 200 | Hornady HP-XTP or HAP | 6.5 | 985 | |
![]() | 200 | Hornady HP-XTP or HAP | 6.9 | 1027 | |
![]() | 200 | Hornady HP-XTP or HAP | 7.3 | 1071 | maximum load |
Using Hornady Bullets Gun: Kimber Stainless Target II; barrel length: 5"; case: Starline; primer: Win. Large Pistol; bullet diameter: .400"; COAL: 1.260"; maximum COAL: 1.260"; maximum case length: .992; trim to length: .982. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 115 | Speer Gold Dot | 5.7 | 1,155 | primer: WSP; standard deviation (fps): 21; coefficient of variation (percent): 1.82; group (inches): 0.85; muzzle energy (ft-lbs): 341 |
![]() | 124 | Hornady XTP | 5.4 | 1,079 | primer: WSP; standard deviation (fps): 25; coefficient of variation (percent); 2.32; group (inches): 1.81; muzzle energy (ft-lbs): 321 |
![]() | 124 | Hornady XTP | 5.6 | 1,099 | primer: WSP; standard deviation (fps): 17; coefficient of variation (percent); 1.55; group (inches): 1.84; muzzle energy (ft-lbs): 333 |
![]() | 147 | Hornady XTP | 4.5 | 926 | primer: WSP: standard deviation (fps): 29; coefficient of variation (percent): 3.13; group (inches): 2.09; muzzle energy (ft-lbs): 280; best 147-grain XTP load |
![]() | 125 | Bushwacker semiwadcutter | 5.4 | 1,102 | primer: WSP; standard deviation (fps): 14; coefficient of variation (percent): 1.27; group (inches): 1.50; muzzle energy (ft-lbs): 138; best 125-grain SWC load |
in a CZ Model 85 A CZ Model 85 Combat with a 4.7-inch barrel and open sights was used for testing. Velocities were taken 12 feet from the muzzle with an Oehler Model 35P chronograph. Accuracy is the average of (at least) three, five-shot groups at 20 yards from a sandbag rest. Range temperatures were 58 to 74 degrees Fahrenheit. R-P, Remington-Peters; WAP, Winchester Action Pistol; WSL, Sinchester Super Lite; WSP, Winchester Small Pistol. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 147 | Hornady HPBT-XTP | 3.5 | 829 | overall loaded length (inches): 1.100 |
![]() | 147 | Hornady HPBT-XTP | 4.0 | 900 | overall loaded length (inches): 1.100 |
![]() | 147 | Hornady HPBT-XTP | 4.4 | 979 | overall loaded length (inches): 1.100 |
![]() | 147 | Hornady HPBT-XTP | 4.8 | 1049 | overall loaded length (inches): 1.100 |
![]() | 147 | Speer TMJ-FN | 4.0 | 879 | overall loaded length (inches): 1.130 |
![]() | 147 | Speer TMJ-FN | 4.4 | 965 | overall loaded length (inches): 1.130 |
![]() | 147 | Speer TMJ-FN | 4.8 | 1036 | overall loaded length (inches): 1.130 |
(147 GR) Handload Data A 5-inch barreled Kimber Model 1911 Team Match II was used to shoot all loads in Starline cases with Winchester Small Pistol primers. SAAMI minimum cartridge overall length: 1.000 inch; maximum cartridge overall length: 1.169 inches; maximum case length: .754 inch; trim to length: .744 inch. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 90 | Hornady HP-XTP | 5.5 | 1191 | overall loaded length (inches): 1.070 |
![]() | 90 | Hornady HP-XTP | 6.0 | 1271 | overall loaded length (inches): 1.070 |
![]() | 90 | Hornady HP-XTP | 6.5 | 1372 | overall loaded length (inches): 1.070 |
![]() | 90 | Hornady HP-XTP | 7.0 | 1459 | overall loaded length (inches): 1.070 |
![]() | 90 | Sierra JHP | 5.5 | 1180 | overall loaded length (inches): 1.010 |
![]() | 90 | Sierra JHP | 7.0 | 1465 | overall loaded length (inches): 1.010 |
![]() | 115 | Barnes XPB | 4.5 | 1065 | overall loaded length (inches): 1.125 |
![]() | 115 | Barnes XPB | 5.0 | 1141 | overall loaded length (inches): 1.125 |
![]() | 115 | Barnes XPB | 5.5 | 1234 | overall loaded length (inches): 1.125 |
![]() | 115 | Barnes XPB | 6.0 | 1311 | overall loaded length (inches): 1.125 |
![]() | 115 | Hornady HP-XTP | 5.0 | 1119 | overall loaded length (inches): 1.075 |
![]() | 115 | Hornady HP-XTP | 5.6 | 1205 | overall loaded length (inches): 1.075 |
![]() | 115 | Hornady HP-XTP | 6.2 | 1292 | overall loaded length (inches): 1.075 |
![]() | 115 | Speer Gold Dot HP | 5.0 | 1115 | overall loaded length (inches): 1.125 |
![]() | 115 | Speer Gold Dot HP | 5.6 | 1201 | overall loaded length (inches): 1.125 |
![]() | 115 | Speer Gold Dot HP | 6.2 | 1281 | overall loaded length (inches): 1.125 |
![]() | 115 | Nosler JHP | 5.0 | 1122 | overall loaded length (inches): 1.115 |
![]() | 115 | Nosler JHP | 5.6 | 1211 | overall loaded length (inches): 1.115 |
![]() | 115 | Nosler JHP | 6.2 | 1301 | overall loaded length (inches): 1.115 |
(90 & 115 GR) Handload Data A 5-inch barreled Kimber Model 1911 Team Match II was used to shoot all loads in Starline cases with Winchester Small Pistol primers. SAAMI minimum cartridge overall length: 1.000 inch; maximum cartridge overall length: 1.169 inches; maximum case length: .754 inch; trim to length: .744 inch. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 80 | Barnes TAC-XP | 5.7 | 1239 | start load; COL: 1.025"; 31,100 psi |
![]() | 80 | Barnes TAC-XP | 6.6 | 1327 | max load; COL: 1.025"; 33,500 psi |
![]() | 90 | Speer GDHP | 6.0 | 1278 | start load; COL: 1.010"; 29,400 psi |
![]() | 90 | Speer GDHP | 7.0 | 1378 | max load; COL: 1.010"; 32,300 psi |
![]() | 95 | Sierra FMJ | 5.8 | 1192 | start load; COL: 1.020"; 25,800 psi |
![]() | 95 | Sierra FMJ | 6.8 | 1356 | max load; COL: 1.020"; 33,300 psi |
![]() | 100 | Speer FMJ | 5.5 | 1158 | start load; COL: 1.050"; 26,500 psi |
![]() | 100 | Speer FMJ | 6.5 | 1315 | max load; COL: 1.050"; 33,300 psi |
![]() | 115 | Speer GDHP | 5.0 | 1127 | start load; COL: 1.125"; 29,000 psi |
![]() | 115 | Speer GDHP | 6.0 | 1203 | max load; COL: 1.125"; 32,300 psi |
![]() | 115 | Lead Round Nose | 5.0 | 1032 | start load; bullet diam.: .356"; COL: 1.100"; 20,200 cup |
![]() | 115 | Lead Round Nose | 6.0 | 1166 | max load; bullet diam.: .356"; COL: 1.100"; 27,300 cup |
![]() | 124 | Berry's Bullets HBRN TP | 4.8 | 958 | start load; bullet diam.: .356"; COL: 1.150"; 23,000 psi |
![]() | 124 | Berry's Bullets HBRN TP | 5.8 | 1135 | max load; bullet diam.: .356"; COL: 1.150"; 32,300 psi |
![]() | 125 | Lead Conical Nose | 5.0 | 1052 | start load; bullet diam.: .356"; COL: 1.125"; 24,700 cup |
![]() | 125 | Lead Conical Nose | 5.7 | 1115 | max load; bullet diam.: .356"; COL: 1.125"; 28,300 cup |
![]() | 125 | Hornady HAP | 3.9 | 901 | start load; bullet diam.: .356"; COL: 1.069"; 24,700 psi |
![]() | 125 | Hornady HAP | 4.4 | 998 | max load; bullet diam.: .356"; COL: 1.069"; 32,600 psi |
![]() | 125 | Sierra FMJ | 4.7 | 1022 | start load; COL: 1.090"; 28,100 psi |
![]() | 125 | Sierra FMJ | 5.7 | 1162 | max load; COL: 1.090"; 33,400 psi |
![]() | 130 | Berry's Bullets RN | 5.2 | 970 | start load; bullet diam.: .356"; COL: 1.150"; 27,500 psi |
![]() | 130 | Berry's Bullets RN | 5.8 | 1115 | max load; bullet diam.: .356"; COL: 1.150"; 33,900 psi |
![]() | 147 | Hornady XTP | 3.8 | 851 | start load; COL: 1.100"; 25,700 psi |
![]() | 147 | Hornady XTP | 4.7 | 1004 | max load; COL: 1.100"; 33,800 psi |
Hodgdon Data Case: Winchester; twist: 1:10"; primer: CCI 500, Small Pistol; barrel length: 4"; trim length: .750"; bullet diam.: .355" (except where otherwise specified in remarks). | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 115 | Barnes XPB | 4.7 | 1016 | minimum |
![]() | 115 | Barnes XPB | 5.2 | 1123 | maximum |
Barnes Reloading Manual #4 case: W-W; case trim length: .744"; twist rate: 1:10"; primer: WSP; barrel length: 4"; COAL: 1.125"; maximum loads should be used with caution; NOTE: Use a taper crimp on the case mouth.The Barnes #35515 115-grain XPB bullet has a slight taper on the base to prevent bulging of the case wall once the bullet is seated. Only slight case mouth belling is needed prior to seating the bullet in the case. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 124 | Hornady HP-XTP | 5.0 | 1128 | overall loaded length (inches): 1.060 |
![]() | 124 | Hornady HP-XTP | 5.5 | 1204 | overall loaded length (inches): 1.060 |
![]() | 124 | Hornady HP-XTP | 6.0 | 1271 | overall loaded length (inches): 1.060 |
![]() | 124 | Speer Gold Dot HP | 5.0 | 1116 | overall loaded length (inches): 1.120 |
![]() | 124 | Speer Gold Dot HP | 5.5 | 1185 | overall loaded length (inches): 1.120 |
![]() | 124 | Speer Gold Dot HP | 6.0 | 1263 | overall loaded length (inches): 1.120 |
![]() | 125 | Sierra FMJ | 5.5 | 1193 | overall loaded length (inches): 1.135 |
![]() | 125 | Sierra FMJ | 6.0 | 1259 | overall loaded length (inches): 1.135 |
Handload Data A 5-inch barreled Kimber Model 1911 Team Match II was used to shoot all loads in Starline cases with Winchester Small Pistol primers. SAAMI minimum cartridge overall length: 1.000 inch; maximum cartridge overall length: 1.169 inches; maximum case length: .754 inch; trim to length: .744 inch. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 90 | Sierra JHP | 6.0 | 1320 | overall length (inches): 1.065; group (inches): 3.00 |
![]() | 115 | Sierra JHP | 5.0 | 1088 | overall length (inches): 1.100; group (inches): 2.25 |
![]() | 115 | Barnes X-Bullet | 4.0 | 1066 | overall length (inches): 1.120; group (inches): 2.00 |
![]() | 115 | Barnes X-Bullet | 4.2 | 1054 | overall length (inches): 1.120 |
![]() | 115 | Barnes X-Bullet | 4.3 | 1135 | overall length (inches): 1.120; group (inches): 1.90 |
![]() | 122 | Magnus flatnose | 5.0 | 1082 | overall length (inches): 1.142; group (inches): 3.60 |
in a Browning Hi-Power Accuracy is for five-shot groups at 25 yards from a solid benchrest. The group was measured from the inside of the most widely spaced bullet holes | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 125 | Bushwacker SWC | 5.4 | 1,071 | primer: WSP; group (inches): 1.89 |
in an S & W Model 952-2 Cast Bullets A Smith & Wesson Model 952-2 PC with a 5-inch barrel and open sights was used for testing. Once-fired Federal cases were used throughout. Velocities were taken 12 feet from the muzzle with an Oehler M-35P chronograph. Accuracy is the average of three, five-shot groups at 25 yards from a sandbag rest. WSL=Winchester Super Lite; WSP=Winchester Small Pistol primer. Range temperatures were 58 to 74 degrees Fahrenheit. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
![]() | 115 | Speer Gold Dot | 5.7 | 1,080 | primer: CCI 500; group (inches): 1.48; best 115-grain Gold Dot load |
![]() | 115 | Sierra JHP | 5.9 | 1,115 | primer: CCI 500; group (inches): 1.81 |
![]() | 124 | Hornady XTP | 6.0 | 1,074 | primer: CCI 500; group (inches): 0.79; great load |
![]() | 125 | Sierra JHP | 6.0 | 1,052 | primer: CCI 500; group (inches): 2.40 |
![]() | 125 | Sierra JHP | 5.6 | 1,054 | primer: Federal 100; group (inches): 0.81; seated shorter, with slight improvement in accuracy overall |
![]() | 147 | Hornady XTP | 4.5 | 878 | primer: CCI 500; group (inches): 1.18; best 147-grain XTP load |
in an S&W Model 952-2 Jacketed Bullets A Smith & Wesson Model 952-2 PC with a 5-inch barrel and open sights was used for testing. Once-fired Federal cases were used throughout. Velocities were taken 12 feet from the muzzle with an Oehler M-35P chronograph. Accuracy is the average of three, five-shot groups at 25 yards from a sandbag rest. Range temperatures were 58 to 74 degrees Fahrenheit. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
![]() | 125 | Bushwacker .356-inch SWC | 5.0 | 1,054 | SD: 10 fps; CV: 0.95%; group: 1.06 inches; power factor: 132 |
![]() | 125 | Bushwacker .356-inch SWC | 5.5 | 1,106 | SD: 18 fps; CV: 1.63%; group: 1.57 inches; power factor: 138 |
![]() | 125 | Bushwacker .356-inch SWC | 5.8 | 1,147 | SD: 18 fps; CV: 1.57%; group: 1.49 inches; power factor: 143 |
in a CZ 75 Test gun was a custom CZ 75 converted to 9x21mm with a 5.25-inch barrel and three-port compensator. Accuracy is the average of three (or more) five-shot groups at 25 yards. Overall loaded length of all loads was 1.160 inches. Starline nickel-plated cases and Winchester Small Pistol primers were used throughout. Temperatures at time of testing were 65 to 89 degrees Fahrenheit. Average accuracy of all loads tested: 1.36 inches. CV is coefficients of variation and is the standard deviation expressed as a percent of the average velocity. |