SR7625 covers the wide range of shotshells from 10 gauge to 28 gauge in both target and field loadings. This versatile powder is equally useful in a large array of handgun cartridges for target, self-defense and hunting loads.
Shape | Color | Perforation | Diameter min | Diameter max | Length/thick. min | Length/thick. max | Manufacturer |
---|---|---|---|---|---|---|---|
disk | Gray | No | 0.74 mm | 0.75 mm | 0.23 mm | 0.23 mm | Canada |
Ladedata som finnes på hjemmesidene til Evje PK er KUN ment som en veiledning! Ladedata skal alltid verifiseres mot kjente kilder (kruttprodusenter, ladebøker o.l.)
Data funnet på våre hjemmesider brukes på eget ansvar, og Evje Pistolklubb fratar seg alt ansvar for feil bruk av, eller skrivefeil i oppgitte data.
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
50 | Hornady FMJ | 1.2 | 755 | 17,900 cup | |
IMR Pistol Data case: Remington; barrel length: 2.0"; twist: 1:16"; trim length: .610"; primer: CCI 500; bullet diam.: .251"; COL: .900"; these are all maximum loads; NEVER EXCEED MAXIMUM LOADS |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
75 | Cast #311252 | 1.7 | 675 | sugg. start load; .975" OAL | |
75 | Cast #311252 | 2.3 | 860 | max load; .975" OAL | |
85 | Cast #313249 | 1.7 | 675 | sugg. start load; .984" OAL | |
85 | Cast #313249 | 2.2 | 860 | max load; .984" OAL | |
Lyman Reloading Handbook 49th Edition cases: Remington (except where otherwise specified in remarks); trim-to length: .672"; primers: Remington 1 1/2 (except where otherwise specified in remarks); primer size Small Pistol; Lyman shell holder: No. 23; cast bullets used sized to .309 dia.; firearm used: Mauser HSc and Universal Receiver; barrel length: Mauser; 3", Universal Receiver; 3 1/4"; twist: 1-16"; groove dia.: .309" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
71 | Sierra FMJ | 2.3 | 807 | accuracy class: A+; case expansion: near max, 4th best accuracy | |
71 | Sierra FMJ | 2.4 | 848 | accuracy class: B; case expansion: maximum | |
100 | Rem. Lead | 2.1 | 815 | accuracy class: D; case expansion: near max; Leaded bore | |
in a Mauser 1914 Warning! Test pistol was Mauser Model 1914 with 3 1/2" barrel. CCI 500 small pistol primers used with all loads shown. Those loads shown as giving unreliable function or poor accuracy have been included to show velocities and provide an indication of those areas of loading which should not be attempted. Accuracy class (for five shots at 20 yards): A. 1 1/2 inch or less; B. 1 1/2 to 2 1/4 inches; C. 2 1/4 to 3 inches; D. over 3 inches. Plus-sign added indicates the top of that class. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
91 | Lyman 313249 | 2.2 | 774 | accuracy class: A+; case expansion: normal; Most accurate cast bullet load | |
in a Mauser 1914 (cast bullets) Warning! Test pistol was a Mauser Model 1914 with 3 1/2" barrel. CCI 500 small pistol primers used with all loads shown. Those loads shown as giving unreliable function or poor accuracy have been included to show velocities and provide an indication of those areas of loading which should not be attempted. Accuracy class (for five shots at 20 yards): A. 1 1/2 inch or less; B. 1 1/2 to 2 1/4 inches; C. 2 1/4 to 3 inches; D. over 3 inches. Plus-sign added indicates the top of that class. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
71 | Hornady FMJ | 2.3 | 875 | accuracy class: C; case expansion: near max | |
71 | Sierra FMJ | 2.3 | 825 | accuracy class: A+; case expansion: near max; 4th best accuracy | |
in a Walther Warning! Test pistol was a Walther Model "PP" with 3 3/4" barrel. CCI 500 small pistol primers used with all loads shown. Those loads shown as giving unreliable function or poor accuracy have been included to show velocities and provide an indication of those areas of loading which should not be attempted. Accuracy class (for five shots at 20 yards): A. 1 1/2 inch or less; B. 1 1/2 to 2 1/4 inches; C. 2 1/4 to 3 inches; D. over 3 inches. Plus-sign added indicates the top of that class. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
77 | Cast LFP | 3.4 | 912 | start load; COL: 1.335"; 11,000 cup; bullet diam.: .314" | |
77 | Cast LFP | 3.8 | 1017 | max load; COL: 1.335"; 13,900 cup; bullet diam.: .314" | |
83 | Berry's Bullets HBWC | 3.4 | 941 | start load; COL: 1.095"; 15,500 cup; bullet diam.: .314" | |
83 | Berry's Bullets HBWC | 3.9 | 1069 | max load; COL: 1.095"; 20,200 cup; bullet diam.: .314" | |
85 | Hornady HP | 4.0 | 975 | start load; COL: 1.290"; 14,900 cup; bullet diam.: .312" | |
85 | Hornady HP | 4.5 | 1097 | max load; COL: 1.290"; 19,400 cup; bullet diam.: .312" | |
90 | Sierra JHP | 3.7 | 880 | start load; COL: 1.340"; 12,900 cup; bullet diam.: .312" | |
90 | Sierra JHP | 4.2 | 1060 | max load; COL: 1.340"; 20,200 cup; bullet diam.: .312" | |
90 | Hornady LSWC | 3.0 | 836 | start load; COL: 1.350"; 10,300 cup; bullet diam.: .314" | |
90 | Hornady LSWC | 3.6 | 949 | max load; COL: 1.350"; 15,000 cup; bullet diam.: .314" | |
100 | Speer JHP | 3.5 | 831 | start load; COL: 1.345"; 14,600 cup; bullet diam.: .312" | |
100 | Speer JHP | 4.0 | 973 | max load; COL: 1.345"; 20,300 cup; bullet diam.: .312" | |
Hodgdon Pistol Data Case: Federal; twist: 1:16"; primer: Federal 100, Small Pistol; barrel length: 5"; trim length: 1.070". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
75 | Cast #311252 | 4.3 | 1076 | sugg. start load; 14,700 cup; 1.350" OAL | |
75 | Cast #311252 | 4.8 | 1204 | max load; 20,400 cup; 1.350" OAL | |
85 | Cast #313249 | 2.7 | 709 | sugg. start load; 9,700 cup; 1.350" OAL | |
85 | Cast #313249 | 4.3 | 1083 | max load; 19,800 cup; 1.350" OAL | |
Lyman Reloading Manual 49th Edition cases: Federal; trim-to length: 1.065"; primers: Federal 100; primer size: Small Pistol; Lyman shell holder: No. 9; cast bullets used sized to .313" dia.; firearm used: Universal Receiver; barrel length: 5"; twist: 1-16"; groove dia.: .312" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
90 | Hornady SWC (swaged alloy) | 3.6 | 666 | case expansion: moderate | |
in a 3 Inch Barrel H&R Model 504. Federal cases and Federal 100 primers used in all loads. All loads chronographed 10 feet from the muzzle with an Oehler Model 33 chronotach. Overall cartridge length refers to seating for Ruger; all loads for H&R had 1.33-inch OAL. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
90 | Hornady SWC (swaged alloy) | 3.6 | 863 | case expansion: moderate; accuracy class (Ruger): A+; 2nd best accuracy with alloy bullet | |
90 | Hornady SWC (swaged alloy) | 4.0 | 974 | case expansion: normal; accuracy class (Ruger): B | |
116 | Lyman 3118 (cast alloy) | 3.5 | 851 | case expansion: normal; accuracy class (Ruger): B | |
85 | Hornady JHP | 4.5 | 1,093 | case expansion: maximum; accuracy class (Ruger): A; accurate; do NOT exceed! | |
in a 6 1/2 Inch Barrel Ruger Bisley. Federal cases and Federal 100 primers used in all loads. All loads chronographed 10 feet from the muzzle with an Oehler Model 33 chronotach. Overall cartridge length refers to seating for Ruger; all loads for H&R had 1.33-inch OAL. Accuracy rating schedule: A+ = under 1-inch (at 20 yards); A = 1 to 1 1/4 inches; B = 1 1/4 + to 1 1/2 inches; C = 1 1/2 + to 2 inches; D = over 2 inches | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
98 | Speer LHBWC | 3.0 | 1,095 | CFVentures soft gas checks used | |
in a Charter Arms Police Undercover | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
98 | Speer LHBWC | 3.0 | 1,071 | CFVentures soft gas checks used | |
in a Colt Detective |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
91 | Lyman 313249 | 3.2 | 791 | Case: Remington | |
in a 2-inch barrel Warning! Test gun for 2 inch barrel loads was a S&W Model 30 Hand Ejector. All cartridges (handloaded) in both two and six-inch barrel test guns primed with CCI 500 Small Pistol primers. All handloading performed with Lyman No. 310 tong tool. 91-grain Lyman No. 313249 bullets were sized .3125 inch. 112-grain Lyman 3118 bullets were sized .3130 inch. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
91 | Lyman 313249 | 3.0 | 865 | Case: R-P, Second most accurate load. | |
91 | Lyman 313249 | 3.2 | 977 | Case: Norma | |
112 | Lyman 3118 | 2.7 | 807 | Case: Remington, Most accurate load tested. | |
112 | Lyman 3118 | 3.0 | 912 | Case: R-P, Well balanced load. | |
in a 6-inch barrel Test gun for all loads was a Colt Officer's Model Heavy Barrel six inch length. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
93 | Cast #313226 | 2.2 | 553 | sugg. start load | |
93 | Cast #313226 | 3.3 | 953 | max load | |
115 | Cast #3118 | 1.9 | 538 | sugg. start load | |
115 | Cast #3118 | 3.0 | 863 | max load | |
Lyman Cast Bullet Handbook cases: Remington; trim-to length: .915"; primers: Remington 1 1/2; primer size: Small Pistol; Lyman shell holder: No. 9; cast bullets used size to .312" dia.; firearm used: Smith & Wesson Model 31; barrel length: 4"; twist: 1-18 3/4"; groove diameter: .312"; NOTE: More Lyman cast bullet data available under .32 Smith & Wesson Long / .32 S&W Long Lyman Reloading Handbook 49th Edition | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
75 | Cast #311252 | 2.4 | 583 | sugg. start load; 1.115" OAL | |
75 | Cast #311252 | 3.6 | 988 | max load; 1.115" OAL | |
85 | Cast #313249 | 3.0 | 714 | sugg. start load; 1.210" OAL | |
85 | Cast #313249 | 3.6 | 806 | max load; 1.210" OAL | |
Lyman Reloading Handbook 49th Edition cases: Remington; trim-to length: .910"; primers: Remington 1 1/2; primer size: Small Pistol; Lyman shell holder: No. 9; cast bullets used sized to .312" dia.; firearm used: Smith & Wesson Model 31; barrel length: 4"; twist: 1-18 3/4"; groove dia.: .312" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
77 | RCBS 32-77RN | 3.0 | 874 | 131 energy (ft-lb); group (in): 1.90 | |
84 | RCBS 32-84WC | 2.2 | 649 | 79 energy (ft-lb); group (in): 1.60 | |
84 | RCBS 32-84RN | 3.0 | 881 | 144 energy (ft-lb); group (in): 1.90 | |
115 | RCBS 115-FN | 2.7 | 828 | 175 energy (ft-lb); group (in): 1.09 | |
115 | RCBS 115-FN | 3.0 | 944 | 227 energy (ft-lb); group (in): 1.83 | |
in the Contender (Cast Bullets) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
100 | Speer Plinker | 2.7 | 670 | 99 :energy (ft-lb); group (in):2.2 | |
100 | Speer Plinker | 3.0 | 727 | 117 :energy (ft-lb); group (in):2.3 | |
in the Contender (Jacketed Bullets) |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
90 | Lyman 313249 | 1.7 | 525 | bullet: sized .311 inch; OAL: .940 inch; case expansion: maximum for Class I; accurate | |
for Class I Guns Principal test gun, S&W Model 31 Regulation Police with 3-inch barrel. Winchester-Western cases used in all loads. CCI 500 Small Pistol primers used in all loads. Oehler Model 35P Chronograph recorded velocities at 8 feet. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
90 | Lyman 313249 | 2.1 | 657 | bullet: sized .311 inch; OAL: .940 inch; case expansion: near maximum | |
90 | Hornady | 1.8 | 659 | bullet: .314 inch; OAL: .975 inch; case expansion: normal; best accuracy in 2-inch barrel | |
100 | Lyman 313226 | 1.7 | 632 | bullet: sized .312 inch; OAL: .950 inch; case expansion: normal; most accurate load and best all-around for Class II | |
for Class II Guns Principal test gun, S&W Model 31 Regulation Police with 3-inch barrel. Winchester-Western cases used in all loads. CCI 500 Small Pistol primers used in all loads. Oehler Model 35P Chronograph recorded velocities at 8 feet. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
85 | Hornady Jacketed HP/XTP | 3.3 | 703 | sugg start load; 1.535" OAL | |
85 | Hornady Jacketed HP/XTP | 4.7 | 987 | max load; 1.535" OAL | |
90 | Sierra Jacketed HC | 3.7 | 716 | sugg. start load; 1.535" OAL | |
90 | Sierra Jacketed HC | 4.5 | 845 | max load; 1.535" OAL | |
100 | Speer Jacketed HP | 4.2 | 591 | sugg. start load; 8,600 cup; 1.560" OAL | |
100 | Speer Jacketed HP | 4.7 | 770 | max load; 13,700 cup; 1.560" OAL | |
115 | Cast #311008 | 3.2 | 642 | sugg. start load; 1.530" OAL | |
115 | Cast #311008 | 4.0 | 837 | max load; 1.530" OAL | |
Lyman Reloading Handbook 49th Edition cases: Winchester; trim-to length: 1.305"; primers: Winchester WSP; primer size: Small Pistol; Lyman shell holder: No. 10; cast bullets used sized to .313" dia.; firearm used: Ruger Blackhawk and Universal Receiver; barrel length: 6 1/2"; twist: 1-16"; groove dia.: .312" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
100 | Remington lead | 4.5 | 752 | case: R-P; primer: R 1 1/2; expansion: moderate; accurate | |
100 | Remington lead | 5.0 | 935 | case: R-P; primer: R 1 1/2; expansion: near max; poor accuracy | |
113 | Lyman 3118 | 4.5 | 820 | case: Win.; primer: R 1 1/2; expansion: normal | |
115 | Markell Golden Arrow | 4.5 | 929 | case: R-P; primer: F 100; expansion: near max; accurate | |
Revolver Velocities instrumental at nine feet from muzzle of Smith & Wesson Model 1905 with six-inch barrel. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
77 | Cast LFP | 5.5 | 1249 | start load; bullet diam.: .314"; COL: 1.460"; 18,500 psi | |
77 | Cast LFP | 6.3 | 1410 | max load; bullet diam.: .314"; COL: 1.460"; 25,600 psi | |
90 | Cast LRNFP | 4.8 | 1163 | start load; COL: 1.460"; 21,700 psi | |
90 | Cast LRNFP | 5.8 | 1326 | max load; COL: 1.460"; 32,500 psi | |
115 | MEI LRNFP | 4.7 | 1105 | start load; COL: 1.460"; 30,400 psi | |
115 | MEI LRNFP | 5.5 | 1209 | max load; COL: 1.460"; 38,300 psi | |
Hodgdon Data Case: Federal; barrel length: 5"; twist: 1:16"; trim length: 1.200"; primer: Federal 200; bullet diam.: .312 (except where otherwise specified in remarks). NEVER EXCEED MAXIMUM LOADS |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
158 | Speer LSWC or LSWC HP | 4.8 | 926 | start charge; does not reach maximum pressure | |
158 | Speer LSWC or LSWC HP | 5.3 | 1021 | maximum charge; does not reach maximum pressure | |
Speer Reloading Manual #14 max. case length: 1.290"; trim-to length: 1.280"; max cart. OAL: 1.590"; RCBS shell holder: #6; cart. case: Speer; primer: CCI 500 (except where otherwise specified in remarks); test firearm: S&W model 19; barrel length: 6"; NOTE: Do not use the 110-grain Gold Dot SB HP (#4009) in the 357 Magnum; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
110 | Jacketed | 7.9 | 1230 | start load; min OAL: 1.590 | |
110 | Jacketed | 7.9 | 1230 | never exceed; min OAL: 1.590; 35,600 cup | |
125 | Jacketed | 7.4 | 1100 | start load; min OAL: 1.580 | |
125 | Jacketed | 7.4 | 1100 | never exceed; min OAL: 1.580; 35,800 cup | |
140 | Jacketed | 7.0 | 955 | start load; min OAL: 1.590 | |
140 | Jacketed | 7.0 | 955 | never exceed; min OAL: 1.590; 36,000 cup | |
146 | Jacketed | 6.2 | 945 | start load; min OAL: 1.500 | |
146 | Jacketed | 6.2 | 945 | never exceed; min OAL: 1.500; 35,600 cup | |
148 | Wadcutter | 6.0 | 1030 | start load; min OAL: 1.420 | |
148 | Wadcutter | 6.0 | 1030 | never exceed; min OAL: 1.420; 35,600 cup | |
150 | Jacketed | 5.5 | 809 | start load; min OAL: 1.590 | |
150 | Jacketed | 6.4 | 925 | never exceed; min OAL: 1.590; 35,800 cup | |
158 | Jacketed | 6.2 | 855 | start load; min OAL: 1.580 | |
158 | Jacketed | 6.2 | 855 | never exceed; min OAL: 1.580; 35,700 cup | |
158 | Lead | 6.5 | 1020 | start load; min OAL: 1.580 | |
158 | Lead | 6.5 | 1020 | never exceed; min OAL: 1.580; 35,800 cup | |
170 | Jacketed | 5.6 | 815 | start load; min OAL: 1.580 | |
170 | Jacketed | 5.6 | 815 | never exceed; min OAL: 1.580; 35,600 cup | |
200 | Lead | 5.1 | 795 | start load; min OAL: 1.580 | |
200 | Lead | 5.1 | 795 | never exceed; min OAL: 1.580; 35,700 cup | |
Lee Precision Data Small Pistol Primer. With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
92 | Cast #358242 | 7.5 | 1262 | sugg. start load; 20,700 cup | |
92 | Cast #358242 | 9.8 | 1613 | max load; 40,900 cup | |
115 | Cast #358345 | 5.4 | 1036 | sugg. start load; 17,600 cup | |
115 | Cast #358345 | 8.3 | 1446 | max load; 41,900 cup; potentially most accurate load | |
121 | Cast #358242 | 5.5 | 974 | sugg. start load; 17,500 cup | |
121 | Cast #358242 | 8.0 | 1335 | max load; 41,100 cup | |
121 | Cast #356402 | 7.0 | 1205 | sugg. start load; 23,000 cup | |
121 | Cast #356402 | 8.8 | 1429 | max load; 41,600 cup; potentially most accurate load | |
Lyman Cast Bullet Handbook cases: Federal; trim-to length: 1.285"; primers: CCI 550; primer size: Small Pistol Magnum; Lyman shell holder: No. 1; cast bullets used size to .357" dia.; firearm used: Universal Receiver and Special Vented Barrel; barrel length: 4"; twist: 1-18 3/4"; groove diameter: .356" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
90 | Cast #356242 | 7.5 | 1262 | sugg. start load; 1.585" OAL; 20,700 cup | |
90 | Cast #356242 | 9.8 | 1613 | max load; 1.585" OAL; 40,900 cup | |
120 | Cast #356242 | 5.5 | 974 | sugg. start load; 1.585" OAL; 17,500 cup | |
120 | Cast #356242 | 8.0 | 1335 | max load; 1.585" OAL; 41,100 cup | |
120 | Cast #356402 | 7.0 | 1205 | sugg. start load; 1.590" OAL; 23,000 cup | |
120 | Cast #356402 | 8.8 | 1429 | max load; 1.590" OAL; 41,600 cup | |
Cast Bullet Data (Lyman Reloading Manual 49th Edition) cases: Federal; trim-to length: 1.280"; primers: CCI 550"; primer size: Small Pistol, Magnum; Lyman shell holder: No. 1; cast bullets used sized to .357" dia.; firearm used: Universal Receiver; barrel length: 4"; twist: 1-18 3/4"; groove dia.: .356" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
110 | Hornady XTP | 6.0 | 1272 | start load; COL: 1.590"; 18,800 psi | |
110 | Hornady XTP | 8.2 | 1544 | max load; COL: 1.590"; 33,600 psi | |
125 | Hornady XTP | 5.8 | 1178 | start load; COL: 1.590"; 19,900 psi | |
125 | Hornady XTP | 7.5 | 1401 | max load; COL: 1.590"; 33,800 psi | |
125 | MEI Cast LRNFP | 5.0 | 1110 | start load; bullet diam.: .358"; COL: 1.580"; 15,000 psi | |
125 | MEI Cast LRNFP | 6.5 | 1339 | max load; bullet diam.: .358"; COL: 1.580"; 24,000 psi | |
130 | MEI Cast LRNFP | 4.8 | 1075 | start load; bullet diam.: .358"; COL: 1.580"; 14,000 psi | |
130 | MEI Cast LRNFP | 6.3 | 1301 | max load; bullet diam.: .358"; COL: 1.580"; 25,300 psi | |
140 | Hornady XTP | 5.5 | 1079 | start load; COL: 1.590"; 21,700 psi | |
140 | Hornady XTP | 6.7 | 1249 | max load; COL: 1.590"; 31,300 psi | |
146 | Speer JHP | 4.0 | 841 | start load; COL: 1.535"; 14,400 psi | |
146 | Speer JHP | 6.0 | 1183 | max load; COL: 1.535"; 30,000 psi | |
148 | Hornady LHBWC | 3.5 | 868 | start load; bullet diam.: .358"; COL: 1.290"; 14,800 psi | |
148 | Hornady LHBWC | 4.1 | 976 | max load; bullet diam.: .358"; COL: 1.290"; 20,400 psi | |
158 | Hornady XTP | 4.3 | 812 | start load; COL: 1.580"; 16,700 psi | |
158 | Hornady XTP | 5.8 | 1075 | max load; COL: 1.580"; 29,600 psi | |
158 | MEI Cast LSWC | 4.5 | 965 | start load; COL: 1.620"; 15,400 psi | |
158 | MEI Cast LSWC | 6.1 | 1186 | max load; COL: 1.620"; 28,400 psi | |
170 | Sierra JHC | 4.5 | 808 | start load; COL: 1.580"; 19,400 psi | |
170 | Sierra JHC | 5.6 | 1027 | max load; COL: 1.580"; 31,500 psi | |
180 | Nosler Part | 4.1 | 611 | start load; COL: 1.575"; 22,300 psi | |
180 | Nosler Part | 5.1 | 838 | max load; COL: 1.575"; 33,200 psi | |
Hodgdon Data Case: Winchester; barrel length: 10"; twist: 1:18.75"; trim length: 1.285"; primer: Winchester SPM; bullet diam.: .357" (except where otherwise specified in remarks). NEVER EXCEED MAXIMUM LOADS |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
125 | Speer GD-HP | 7.9 | 1304 | COL: 1.135"; 37,100 psi | |
IMR Pistol Data Maximum Loads case: Remington; barrel length: 5"; twist: 1:16"; trim length: .860"; primer: Remington 1 1/2; bullet diam.: .355"; NEVER EXCEED MAXIMUM LOADS |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
115 | Jacketed | 4.2 | 892 | start load; min OAL: 1.265 | |
115 | Jacketed | 4.5 | 955 | never exceed; min OAL: 1.265; 21,800 cup | |
Lee Precision Data CAUTION: With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. Small Pistol primer. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
110 | Speer GDHP SB | 3.5 | 826 | start charge | |
110 | Speer GDHP SB | 3.8 | 909 | maximum charge | |
125 | Speer UCSP or USHP | 3.2 | 748 | start charge | |
125 | Speer UCSP or USHP | 3.5 | 826 | maximum charge | |
158 | Speer LSWC, LSWC HP or LRN | 2.6 | 683 | start charge | |
158 | Speer LSWC, LSWC HP or LRN | 2.9 | 752 | maximum charge | |
Speer Reloading Manual #14 max. case length: 0.775"; trim-to length: 0.765"; max cart. OAL: 1.240"; RCBS shell holder: #6; cart. case: Winchester; primer: CCI 500; test firearm: S&W Model 33; barrel length: 4"; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
121 | Cast #358242 | 2.7 | 580 | sugg. start load | |
121 | Cast #358242 | 3.5 | 830 | max load | |
133 | Cast #358480 | 2.7 | 675 | sugg. start load | |
133 | Cast #358480 | 3.3 | 850 | max load | |
141 | Cast #358495 | 1.9 | 535 | sugg. start load | |
141 | Cast #358495 | 2.5 | 725 | max load | |
158 | Cast #358311 | 2.4 | 660 | sugg. start load | |
158 | Cast #358311 | 2.9 | 770 | max load | |
Lyman Cast Bullet Handbook cases: Winchester; trim-to length: .765"; primers: Winchester 1 1/2-108; primer size: Small Pistol; Lyman shell holder: No. 21; cast bullets used size to .360" dia.; firearm used: Special Pressure test barrel; Smith & Wesson Model 33; barrel length: 4"; twist: 1-18 3/4"; groove diameter: .361" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
150 | Cast #358477 | 2.5 | 634 | sugg. start load; OAL: 1.070"; 8,700 cup | |
150 | Cast #358477 | 2.8 | 713 | max load; OAL: 1.070"; 12,800 cup | |
160 | Cast #358311 | 2.4 | 622 | sugg. start load; OAL: 1.150"; 8,500 cup | |
160 | Cast #358311 | 2.7 | 704 | max load; OAL: 1.150"; 12,400 cup | |
195 | Cast #358430 | 1.9 | 493 | sugg. start load; OAL: 1.175"; 8,800 cup | |
195 | Cast #358430 | 2.2 | 542 | max load; OAL: 1.175"; 10,500 cup | |
Cast Bullet Data Lyman Reloading Handbook 49th Edition cases: Remington; trim-to length: .765"; primers: CCI 500; primer size: Small Pistol; Lyman shell holder: No. 21; cast bullets used sized to .359" dia.; firearm used: Universal Receiver; barrel length: 5 1/2"; twist: 1-14"; groove dia.: .358" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
150 | Magma 38-158 RNFP | 2.6 | 722 | group: 2 1/4 inches | |
Colt Police Positive Test gun was a Colt Police Positive with a 4-inch barrel. These loads duplicate the standard factory load with a 150-grain bullet at 695 fps. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
148.5 | Rapine 358150 | 2.7 | 748 | group: 3 inches | |
Smith & Wesson Model 33 Test gun was an S&W Model 33 with a 4-inch barrel. These loads duplicate the standard factory load with a 148-grain bullet at 745 fps. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
200 | Lyman 358430 | 2.3 | 641 | group: 3 inches | |
Victory Model Test gun was an S&W Victory Model with a 5-inch barrel. These loads duplicate the 200-grain Super Police or .380 Revolver Mk I loads with a 200-grain bullet at 650 fps from a 5-inch barrel and 630 fps from a 4-inch barrel. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
120 | Cast #356242 (Linotype) | 4.0 | 788 | sugg. start load; 1.450" OAL; 10,600 cup | |
120 | Cast #356242 (Linotype) | 5.0 | 988 | max load; 1.450" OAL; 16,200 cup | |
170 | Cast #358429 (Linotype) | 3.4 | 621 | sugg. start load; 1.537" OAL; 9,700 cup | |
170 | Cast #358429 (Linotype) | 4.6 | 821 | max load; 1.537" OAL; 16,300 cup | |
Cast Bullet Data Lyman Reloading Handbook 49th Edition cases: Federal; trim-to length: 1.149"; primers: CCI 500; primer size: Small Pistol; Lyman shell holder: No. 1; cast bullets used sized to .358" dia.; firearm used: Universal Receiver; barrel length: 4"; twist: 1-18 3/4"; groove dia.: .357"; (+P) designates higher pressure loads | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
110 | Hornady XTP | 4.9 | 929 | start load; bullet diam.: .357"; COL: 1.455"; 13,400 psi | |
110 | Hornady XTP | 5.5 | 1092 | max load; bullet diam.: .357"; COL: 1.455"; 16,500 psi | |
125 | Hornady XTP | 4.5 | 875 | start load; bullet diam.: .357"; COL: 1.455"; 13,800 psi | |
125 | Hornady XTP | 5.1 | 999 | max load; bullet diam.: .357"; COL: 1.455"; 16,300 psi | |
125 | Cast LRNFP | 4.6 | 966 | start load; bullet diam.: .358"; COL: 1.445"; 13,700 psi | |
125 | Cast LRNFP | 5.2 | 1075 | max load; bullet diam.: .358"; COL: 1.445"; 16,700 psi | |
130 | MEI Cast LRNFP | 4.6 | 925 | start load; bullet diam.: .358"; COL: 1.460"; 13,700 psi | |
130 | MEI Cast LRNFP | 5.2 | 1055 | max load; bullet diam.: .358"; COL: 1.460"; 16,800 psi | |
140 | Hornady XTP | 4.2 | 751 | start load; bullet diam.: .357"; COL: 1.455"; 13,500 psi | |
140 | Hornady XTP | 4.7 | 872 | max load; bullet diam.: .357"; COL: 1.455"; 16,100 psi | |
140 | Hornady Cowboy | 4.5 | 877 | start load; bullet diam.: .358"; COL: 1.450"; 12,600 psi | |
140 | Hornady Cowboy | 5.1 | 985 | max load; bullet diam.: .358"; COL: 1.450"; 15,200 psi | |
146 | Speer JHP | 3.7 | 640 | start load; bullet diam.: .357"; COL: 1.370"; 11,700 psi | |
146 | Speer JHP | 4.2 | 810 | max load; bullet diam.: .357"; COL: 1.370"; 16,400 psi | |
148 | Hornady LHBWC | 2.5 | 650 | start load; bullet diam.: .358"; COL: 1.160"; 8,700 psi | |
148 | Hornady LHBWC | 3.0 | 767 | max load; bullet diam.: .358"; COL: 1.160"; 13,600 psi | |
158 | Hornady XTP | 4.0 | 692 | start load; bullet diam.: .357"; COL: 1.455"; 12,100 psi | |
158 | Hornady XTP | 4.5 | 825 | max load; bullet diam.: .357"; COL: 1.455"; 16,300 psi | |
158 | MEI Cast LSWC | 3.7 | 790 | start load; bullet diam.: .358"; COL: 1.475"; 12,500 psi | |
158 | MEI Cast LSWC | 4.2 | 894 | max load; bullet diam.: .358"; COL: 1.475"; 16,100 psi | |
170 | Sierra JHC | 4.0 | 654 | start load; bullet diam.: .357"; COL: 1.450"; 12,900 psi | |
170 | Sierra JHC | 4.4 | 766 | max load; bullet diam.: .357"; COL: 1.450"; 16,100 psi | |
Hodgdon Pistol Data Case: Winchester; twist: 1:18.75"; primer: Winchester SP, Small Pistol; barrel length: 7.7"; trim length: 1.145". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
121 | Cast #358242 | 4.0 | 788 | sugg. start load; 10,600 cup | |
121 | Cast #358242 | 5.0 | 988 | max load; 16,200 cup | |
121 | Cast #356402 | 4.0 | 725 | sugg. start load; 8,500 cup | |
121 | Cast #356402 | 5.3 | 1003 | max load; 16,400 cup | |
141 | Cast #358495 | 3.1 | 683 | sugg. start load; 9,100 cup | |
141 | Cast #358495 | 4.3 | 905 | max load; 15,600 cup | |
146 | Cast #358212 | 3.5 | 594 | sugg. start load; 6,900 cup | |
146 | Cast #358212 | 5.0 | 899 | max load; 16,100 cup | |
148 | Cast #35863 | 2.8 | 674 | sugg. start load; 8,700 cup | |
148 | Cast #35863 | 4.0 | 928 | max load; 15,800 cup | |
148 | Cast #35891 | 2.8 | 517 | sugg. start load; 5,800 cup | |
148 | Cast #35891 | 4.7 | 958 | max load; 16,500 cup | |
168 | Cast #358429 | 3.4 | 621 | sugg. start load; 9,700 cup | |
168 | Cast #358429 | 4.6 | 821 | max load; 16,300 cup | |
Lyman Cast Bullet Handbook 3rd Edition cases: Federal; trim-to length: 1.149"; primers: CCI 500; primer size: Small Pistol; Lyman shell holder: No. 1; cast bullets used size to .357" dia.; firearm used: Universal Receiver and Special Vented Barrel; barrel length: 4"; twist: 1-18 3/4"; groove diameter: .357". NOTE: More Lyman cast bullet data available under .38 Special (Cast Bullet Data Lyman Reloading Manual 49th Edition) and .38 Special (Lyman Cast Bullet Handbook 4th Edition). NOTE: Loads designated with the symbol (+P) are higher pressure loads to give greater velocities. These loads should be used only in arms recommended for (+P) type cartridges by the gun manufacturer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
140 | Speer Jacketed HP | 4.2 | 505 | sugg. start load; 1.470" OAL; 10,800 cup | |
140 | Speer Jacketed HP | 5.1 | 715 | max load; 1.470" OAL; 16,100 cup | |
Lyman Reloading Handbook 49th Edition Warning! cases: Federal; trim-to length: 1.149"; primers: CCI 500; primer size: Small Pistol; Lyman shell holder: No. 1; firearm used: Universal Receiver; barrel length: 4"; twist: 1-18 3/4"; groove dia.: .357"; (+P) designates higher pressure loads | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
148 | BB-WC | 4.3 | 931 | maximum load | |
148 | BB-WC | 3.7 | 813 | ||
Speer Reloading Manual #13 max. case length: 1.155"; trim-to length: 1.145"; max. cart. length: 1.550"; RCBS shellholder: #6; barrel length: 6"; twist: 1-18.75"; test firearm: Smith & Wesson Model 14; case: Speer; primers: CCI 500, 550; for the 147 grain cast bullets: seat to and roll-crimp into the front lube groove; use maximum loads with caution | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
110 | Hornady XTP | 5.8 | 1142 | 18,200 psi | |
125 | Hornady XTP | 5.2 | 1043 | 18,500 psi | |
140 | Hornady XTP | 4.8 | 935 | 18,300 psi | |
146 | Speer JHP | 4.5 | 871 | COL: 1.370"; 17,600 psi | |
150 | Nosler JFP | 4.9 | 904 | COL: 1.450"; 17,900 psi | |
158 | Hornady XTP | 4.7 | 881 | 17,800 psi | |
170 | Sierra JHC | 4.6 | 802 | COL: 1.450"; 17,100 psi | |
+P (Hodgdon Pistol Data Maximum Loads) case: Winchester; barrel length: 7.7"; twist: 1:18.75"; trim length: 1.145"; primer: Winchester SP; bullet diam.: .357"; COL: 1.455" (except where otherwise specified in remarks); NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
110 | Hornady XTP | 5.8 | 1142 | 18,200 psi | |
125 | Hornady XTP | 5.2 | 1043 | 18,500 psi | |
140 | Hornady XTP | 4.8 | 935 | 18,300 psi | |
146 | Speer JHP | 4.5 | 871 | COL: 1.370"; 17,600 psi | |
150 | Nosler JFP | 4.9 | 904 | COL: 1.450"; 17,900 psi | |
158 | Hornady XTP | 4.7 | 881 | 17,800 psi | |
170 | Sierra JHC | 4.6 | 802 | COL: 1.450"; 17,100 psi | |
+P (Hodgdon Pistol Data Maximum Loads) case: Winchester; barrel length: 7.7"; twist: 1:18.75"; trim length: 1.145"; primer: Winchester SP; bullet diam.: .357"; COL: 1.455" (except where otherwise specified in remarks); NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
95 | Jacketed | 5.3 | 1015 | start load; min. OAL: 1.470 | |
95 | Jacketed | 5.6 | 1065 | NEVER EXCEED; 15,700 cup; min. OAL: 1.470 | |
110 | Jacketed | 5.3 | 1030 | start load; min. OAL: 1.460 | |
110 | Jacketed | 5.5 | 1060 | NEVER EXCEED; 15,400 cup; min. OAL: 1.460 | |
125 | Jacketed | 5.0 | 882 | start load; min. OAL: 1.525 | |
125 | Jacketed | 5.3 | 935 | NEVER EXCEED; 15,900 cup; min. OAL: 1.525 | |
140 | Jacketed | 4.4 | 745 | start load; min. OAL: 1.455 | |
140 | Jacketed | 4.6 | 780 | NEVER EXCEED; 15,800 cup; min. OAL: 1.455 | |
146 | Jacketed | 4.0 | 712 | start load; min. OAL: 1.395 | |
146 | Jacketed | 4.2 | 740 | NEVER EXCEED; 15,600 cup; min. OAL: 1.395 | |
148 | Wad Cutter | 3.2 | 696 | start load; min. OAL: 1.295 | |
148 | Wad Cutter | 4.2 | 875 | NEVER EXCEED; 16,000 cup; min. OAL: 1.295 | |
150 | Jacketed | 4.1 | 735 | start load; min. OAL: 1.445 | |
150 | Jacketed | 4.3 | 770 | NEVER EXCEED; 15,700 cup; min. OAL: 1.445 | |
158 | Jacketed | 4.1 | 630 | start load; min. OAL: 1.465 | |
158 | Jacketed | 4.3 | 660 | NEVER EXCEED; 15,700 cup; min. OAL: 1.465 | |
158 | Lead | 3.7 | 691 | start load; min. OAL: 1.520 | |
158 | Lead | 4.3 | 790 | NEVER EXCEED; 15,200 cup; min. OAL: 1.520 | |
200 | Lead | 3.3 | 720 | start load; min. OAL: 1.500 | |
200 | Lead | 3.5 | 755 | NEVER EXCEED; 15,800 cup; min. OAL: 1.500 | |
Lee Precision Data With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. Small Pistol Primer. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
148 | Speer HB | 3.0 | 588 | Best group: 1.37 | |
5-Inch Barrel Colt National Match Mk. III Auto. Precision, Speer H.B. and Hornady wadcutters were all of hollow-base design, while the Speer Standard and RCBS-Mould cast bullets were solid flat-base type. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
148 | Precision | 3.0 | 575 | Best group: .75 | |
148 | Speer HB | 3.0 | 537 | Best group 1.50 | |
6-Inch Barrel Colt 357 Revolver. Precision, Speer H.B. and Hornady wadcutters were all of hollow-base design, while the Speer Standard and RCBS-Mould cast bullets were solid flat-base type. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
115 | Hornady XTP | 4.5 | 955 | max load; COL: 1.245"; 21,800 cup | |
Hodgdon Data Case: Remington; twist: 1:16"; primer: Remington 1 1/2, Small Pistol; barrel length: 5"; trim length: .895"; bullet diam.: .355" (except where otherwise specified in remarks). | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
115 | Hornady HP | 4.5 | 955 | 21,800 cup | |
IMR Pistol Data Maximum Loads case: Remington; barrel length: 5"; twist: 1:16"; trim length: .895"; primer: CCI 500; bullet diam.: .355"; COL: 1.265"; NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
95 | Cast #356404 | 5.4 | 1197 | sugg. start load; 20,000 cup | |
95 | Cast #356404 | 6.7 | 1429 | max load; 31,100 cup | |
Lyman Cast Bullet Handbook cases: Remington; trim-to length: .895"; primers: Winchester 1 1/2-108; primer size: Small Pistol; Lyman shell holder: No. 12; cast bullets used size to .355" dia.; firearm used: Universal Receiver; barrel length: 5"; twist: 1-16"; groove diameter: .355". NOTE: More Lyman cast bullet data available under .38 Super Automatic Cast Bullet Handgun Data Lyman Reloading Handbook 49th Edition | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
120 | Cast #356242 | 4.2 | 978 | sugg. start load; 18,100 cup; 1.160" OAL | |
120 | Cast #356242 | 5.8 | 1230 | max load; 29,300 cup; 1.160" OAL | |
120 | Cast #356402 | 5.1 | 1099 | sugg. start load; 20,600 cup; 1.230" OAL | |
120 | Cast #356402 | 6.6 | 1274 | max load; 29,900 cup; 1.230" OAL | |
Cast Bullet Handgun Data Lyman Reloading Handbook 49th Edition cases: Remington; trim-to length: .895"; primers: Winchester WSP; primer size: Small Pistol; Lyman shell holder: No. 12; cast bullets used sized to .355" dia.; firearm used: Universal Receiver; barrel length: 5"; twist: 1-16"; groove dia.: .355" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
90 | Sierra Jacketed HP | 6.0 | 1203 | sugg. start load; 21,200 cup; 1.125" OAL | |
90 | Sierra Jacketed HP | 7.8 | 1515 | max load; 30,600 cup; 1.125" OAL | |
115 | Hornady Jacketed HP | 5.3 | 1042 | sugg. start load; 19,200 cup; 1.265" OAL | |
115 | Hornady Jacketed HP | 6.6 | 1195 | max load; 31,900 cup; 1.265" OAL | |
Lyman Reloading Handbook 49th Edition cases: Remington; trim-to length: .895"; primers: CCI 500; primer size: Small Pistol; Lyman shell holder: No. 12; firearm used: Universal Receiver; barrel length: 5"; twist: 1-16"; groove dia.: .355" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
115 | Sierra JHC | 6.0 | 1,167 | case: W-W; length (in.): 1.24; expansion: maximum | |
in a 5-inch Barrel Test gun Colt .38 Super Automatic with five-inch Colt barrel; Winchester 108 Small Pistol primers; velocities chronographed ten feet from muzzle. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
180 | MG 180 | 10.0 | |||
175 | Lyman 401043 | 10.0 | 1,258 | ||
Colt Peacemaker Loads All loads fired in Winchester .38 WCF brass with CCI 300 primers except where otherwise noted in remarks. SC = 3.5 inches or more. (Loading the Peacemaker - Dave Scovill) |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
90 | Sierra Jacketed HC | 2.2 | 583 | sugg start load; 8,100 cup; .925" OAL | |
90 | Sierra Jacketed HC | 3.1 | 941 | max load; 15,200 cup; .925" OAL | |
95 | Sierra FMJ | 2.9 | 769 | sugg start load; 11,300 cup; .900" OAL | |
95 | Sierra FMJ | 3.3 | 899 | max load; 15,400 cup; .900" OAL | |
115 | Hornady Jacketed HP/XTP | 2.2 | 667 | sugg start load; 8,700 cup; .956" OAL | |
115 | Hornady Jacketed HP/XTP | 3.1 | 928 | max load; 15,800 cup; .956" OAL | |
Lyman Reloading Handbook 49th Edition cases: Federal; trim-to length: .677"; primers: Federal 100 and Winchester WSP; primer size: small pistol; Lyman shell holder: No. 26; firearm used: Universal Receiver; barrel length: 3 3/4"; twist: 1-16"; groove dia.: .355" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
90 | Hornady HP | 3.2 | 880 | COL: .970"; 14,700 cup | |
100 | Hornady FMJ | 3.0 | 855 | COL: .980"; 15,500 cup | |
IMR Pistol Data Maximum Loads case: Remington; barrel length: 3.75"; twist: 1:16"; trim length: .675"; primer: CCI 500; bullet diam.: .355"; NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
115 | Nosler Sporting Handgun Jacketed Hollow Point | 3.1 | 832 | maximum load; compressed load | |
115 | Nosler Sporting Handgun Jacketed Hollow Point | 2.6 | 747 | ||
115 | Nosler Sporting Handgun Jacketed Hollow Point | 2.1 | 662 | most accurate load tested | |
Using Nosler Bullets Case: Remington; primer: WSP; barrel length/make: 2 1/4" Colt Mk. IV; twist: 1-16"; bullets: 115 GR Sporting Handgun Pistol JHP; OACL: .975"; maximum OACL: .984". Use Maximum Loads with Caution | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
90 | Jacketed | 3.2 | 880 | start load; min OAL: 0.970 | |
90 | Jacketed | 3.2 | 880 | never exceed; min OAL: 0.970; 14,700 cup | |
100 | Jacketed | 2.9 | 831 | start load; min OAL: 0.980 | |
100 | Jacketed | 3.0 | 855 | never exceed; min OAL: 0.980; 15,500 cup | |
Lee Precision Data CAUTION: With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. Small Pistol Primer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
90 | Sierra JHC | 4.1 | 1,072 | most potent in Back Up; best overall load | |
in a 2 1/2-inch barrel All handloads utilize Federal brass and CCI 500 primers. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
90 | Sierra JHC | 4.1 | 1,112 | most potent in Back Up; best overall load | |
in a 3.3-inch barrel All handloads utilize Federal brass and CCI 500 primers. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
180 | Speer GDHP SB, TMJ FN or GDHP | 5.4 | 884 | start charge | |
180 | Speer GDHP SB, TMJ FN or GDHP | 6.0 | 981 | maximum charge | |
Speer Reloading Manual #14 max. case length: 0.850"; trim-to length: 0.840"; max cart. OAL: 1.135"; RCBS shell holder: #27; cart. case: Speer; primer: CCI 500; test firearm: Smith & Wesson M4006; barrel length: 4"; IMPORTANT SAFETY NOTE: These loads were developed and tested for safe use in HANDGUNS. Not all loads may be suitable for use in a carbine or rifle chambered for this cartridge. If loading for a carbine or rifle, choose from among the loads developing the highest handgun velocities and load just a few rounds. Thoroughly test this small sample in your firearm in slow-fire mode, insuring that you achieve proper feeding and ejection. Be certain that all bullets exit the barrel; watching the target for each bullet strike is the best way to know that the load produces sufficient gas volume for a longer barrel. Use maximum loads with CAUTION. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
135 | Nosler JHP | 7.1 | 1173 | start load; COL: 1.125"; 26,500 psi | |
135 | Nosler JHP | 7.8 | 1273 | max load; COL: 1.125"; 32,000 psi | |
140 | Barnes TAC-XP | 4.6 | 912 | start load; COL: 1.135"; 28,900 psi | |
140 | Barnes TAC-XP | 5.0 | 972 | max load; COL: 1.135"; 32,700 psi | |
150 | Nosler JHP | 6.1 | 1083 | start load; COL: 1.125"; 26,800 psi | |
150 | Nosler JHP | 6.5 | 1159 | max load; COL: 1.125"; 31,700 psi | |
155 | Hornady XTP | 6.4 | 1087 | start load; COL: 1.125"; 26,800 psi | |
155 | Hornady XTP | 7.0 | 1153 | max load; COL: 1.125"; 30,800 psi | |
155 | Berry's Bullets FP | 6.3 | 1082 | start load; COL: 1.125"; 27,300 psi | |
155 | Berry's Bullets FP | 7.0 | 1183 | max load; COL: 1.125"; 33,000 psi | |
165 | Sierra JHP | 5.9 | 1020 | start load; COL: 1.125"; 27,400 psi | |
165 | Sierra JHP | 6.5 | 1097 | max load; COL: 1.125"; 32,100 psi | |
165 | Berry's Bullets FP | 5.8 | 1010 | start load; COL: 1.125"; 27,200 psi | |
165 | Berry's Bullets FP | 6.4 | 1103 | max load; COL: 1.125"; 33,000 psi | |
180 | Berry's Bullets FP | 5.2 | 937 | start load; COL: 1.125"; 26,900 psi | |
180 | Berry's Bullets FP | 5.8 | 1018 | max load; COL: 1.125"; 33,000 psi | |
180 | Hornady XTP | 5.2 | 935 | start load; COL: 1.125"; 27,900 psi | |
180 | Hornady XTP | 5.7 | 999 | max load; COL: 1.125"; 31,700 psi | |
200 | Hornady XTP | 4.2 | 787 | start load; COL: 1.125"; 27,700 psi | |
200 | Hornady XTP | 4.8 | 872 | max load; COL: 1.125"; 32,800 psi | |
Hodgdon Data Case: Hornady; twist: 1:16"; primer: Winchester SP, Small Pistol; barrel length: 4"; trim length: .845"; bullet diam.: .400". This data is intended for use in firearms with barrels which fully support the cartridge in the chamber. Use of this data in firearms which do not fully support the cartridge, such as Glock, may result in bulged cases, ruptured cases, case head separation, or other conditions which may result in damage to the firearm and/or result in injury or death of the shooter and/or bystanders. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
135 | Jacketed | 7.8 | 1250 | start load; compressed charge; min. OAL: 1.125 | |
135 | Jacketed | 7.8 | 1250 | NEVER EXCEED; min. OAL: 1.125; 30,200 psi | |
Lee Precision 135 GR Data Do not use reloads in Glock or similar guns with chambers that do not fully support the cartridge due to the intrusion of the feed ramp. CAUTION: With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. Small Pistol Primer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
150 | Jacketed | 6.8 | 1110 | start load; compressed charge; min. OAL: 1.125 | |
150 | Jacketed | 7.2 | 1165 | NEVER EXCEED; compressed charge; min. OAL: 1.125; 32,500 psi | |
Lee Precision 150 GR Data Do not use reloads in Glock or similar guns with chambers that do not fully support the cartridge due to the intrusion of the feed ramp. CAUTION: With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. Small Pistol Primer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
180 | Jacketed Bullet | 5.3 | 918 | start load; min. OAL: 1.125 | |
180 | Jacketed Bullet | 5.7 | 990 | NEVER EXCEED; min. OAL: 1.125; 33,300 psi | |
Lee Precision 180 GR Data Do not use reloads in Glock or similar guns with chambers that do not fully support the cartridge due to the intrusion of the feed ramp. CAUTION: With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. Small Pistol Primer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
180 | Speer Gold Dot TMJ or GD-HP | 6.0 | 981 | maximum load | |
180 | Speer Gold Dot TMJ or GD-HP | 5.4 | 884 | ||
Speer Reloading Manual #13 max. case length: 0.850"; trim-to length: 0.840"; max. cart. length: 1.135"; RCBS shellholder: #27; barrel length: 4"; twist: 1-16"; test firearm: Smith & Wesson Model 4006; case: Speer; primers: CCI 500; bullet diam.: .400"; use maximum loads with caution; SAFETY NOTICE Some pistols chambered for the 40 S&W cartridge may not provide complete support of the case head. If this condition exists, normal pressure loads such as those shown here can cause the case wall to bulge or rupture at the unsupported point. Contact your firearm manufacturer to determine if your pistol completely supports the case head, or ask a gunsmith to inspect your pistol before using it with ANY ammunition. It is the gun owner's responsibility to know his firearm and its capabilities and limitations. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
135 | Sierra JHP | 6.4 | 1078 | ||
135 | Sierra JHP | 6.7 | 1113 | ||
135 | Sierra JHP | 7.0 | 1154 | ||
135 | Sierra JHP | 7.3 | 1195 | ||
135 | Sierra JHP | 7.6 | 1234 | ||
135 | Sierra JHP | 7.9 | 1273 | ||
135 | Sierra JHP | 8.2 | 1314 | ||
135 | Sierra JHP | 8.5 | 1355 | ||
135 | Sierra JHP | 8.8 | 1392 | maximum load | |
150 | Sierra JHP | 5.7 | 1001 | ||
150 | Sierra JHP | 6.0 | 1034 | ||
150 | Sierra JHP | 6.3 | 1073 | ||
150 | Sierra JHP | 6.6 | 1112 | ||
150 | Sierra JHP | 7.0 | 1149 | ||
150 | Sierra JHP | 7.3 | 1188 | ||
150 | Sierra JHP | 7.6 | 1227 | ||
150 | Sierra JHP | 7.9 | 1263 | maximum load | |
165 | Sierra JHP | 5.4 | 941 | ||
165 | Sierra JHP | 5.7 | 977 | ||
165 | Sierra JHP | 6.0 | 1019 | ||
165 | Sierra JHP | 6.4 | 1061 | ||
165 | Sierra JHP | 6.7 | 1103 | ||
165 | Sierra JHP | 7.0 | 1145 | ||
165 | Sierra JHP | 7.3 | 1182 | maximum load | |
180 | Sierra JHP | 4.8 | 880 | ||
180 | Sierra JHP | 5.2 | 918 | ||
180 | Sierra JHP | 5.5 | 962 | ||
180 | Sierra JHP | 5.9 | 1006 | ||
180 | Sierra JHP | 6.2 | 1050 | ||
180 | Sierra JHP | 6.6 | 1089 | maximum load | |
Using Sierra Bullets Notes: Gun: Glock Model 22; barrel length: 4.35"; case: Starline; primer: Winchester Small Pistol; bullet diameter: .400"; 135 GR Sierra JHP COAL: 1.125"; 150 GR Sierra JHP COAL: 1.125"; 165 GR Sierra JHP COAL: 1.125"; 180 GR Sierra JHP COAL: 1.125"; maximum COAL: 1.135"; maximum case length: .850"; trim to length: .845". | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
135 | Nosler JHP | 6.0 | 1023 | overall loaded length (inches): 1.125 | |
135 | Nosler JHP | 6.5 | 1085 | overall loaded length (inches): 1.125 | |
135 | Nosler JHP | 7.0 | 1141 | overall loaded length (inches): 1.125 | |
135 | Nosler JHP | 7.5 | 1223 | overall loaded length (inches): 1.125 | |
135 | Nosler JHP | 8.0 | 1289 | overall loaded length (inches): 1.125 | |
135 | Nosler JHP | 8.5 | 1351 | overall loaded length (inches): 1.125 | |
135 | Nosler JHP | 8.8 | 1385 | overall loaded length (inches): 1.125 | |
150 | Sierra JHP | 5.5 | 982 | overall loaded length (inches): 1.125 | |
150 | Sierra JHP | 6.0 | 1038 | overall loaded length (inches): 1.125 | |
150 | Sierra JHP | 6.5 | 1098 | overall loaded length (inches): 1.125 | |
150 | Sierra JHP | 7.0 | 1140 | overall loaded length (inches): 1.125 | |
150 | Sierra JHP | 7.5 | 1213 | overall loaded length (inches): 1.125 | |
150 | Sierra JHP | 8.0 | 1271 | overall loaded length (inches): 1.125 | |
180 | Sierra JHP | 4.8 | 880 | overall loaded length (inches): 1.125 | |
180 | Sierra JHP | 5.2 | 918 | overall loaded length (inches): 1.125 | |
180 | Sierra JHP | 5.5 | 962 | overall loaded length (inches): 1.125 | |
180 | Sierra JHP | 5.9 | 1006 | overall loaded length (inches): 1.125 | |
180 | Sierra JHP | 6.2 | 1050 | overall loaded length (inches): 1.125 | |
180 | Sierra JHP | 6.6 | 1089 | overall loaded length (inches): 1.125 | |
Load Data A Glock Model 22 with a 4.35-inch barrel was used to test-fire all loads. Starline cases and Winchester Small Pistol primers were used throughout. Bullet diameter: .400 inch; maximum cartridge overall length: 1.135 inches; maximum case length: .850 inch; trim-to length: .845 inch. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
210 | Hornady XTP | 9.1 | 1245 | max load; COL: 1.580"; 39,700 cup | |
Hodgdon Pistol Data Case: Remington; twist: 1:18.75"; primer: Winchester LP; barrel length: 10.125"; trim length: 1.280"; BULLET DIAM.: .410". NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
170 | Jacketed | 9.6 | 1337 | start load; min OAL: 1.575 | |
170 | Jacketed | 10.8 | 1485 | never exceed; min OAL: 1.575; 39,400 cup | |
210 | Jacketed | 8.1 | 1121 | start load; min OAL: 1.590 | |
210 | Jacketed | 9.1 | 1245 | never exceed; min OAL: 1.590; 39,700 cup | |
210 | Lead | 8.0 | 1130 | start load; min OAL: 1.590 | |
210 | Lead | 9.0 | 1255 | never exceed; min OAL: 1.590; 39,500 cup | |
Lee Precision Data CAUTION: With NEVER EXCEED LOADS; maintain Minimum Over All Length or longer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
210 | Hornady JHP | 8.5 | 1,036 | case: R-P; primer: F 150; O.A. Ctg. Lgt.: 1.58; case expansion: normal | |
Pet Loads All loads chronographed from 6 1/2-inch barrel Ruger Blackhawk. Oehler Model 31 Chronotach, Oehler Model 51 Electronic screens, spaced 10 feet apart; I.V. = Instrumental Velocity at 10 feet from muzzle. Update: Alliant Powder Company does not recommend Blue Dot in the .41 Magnum for any bullet weights. Their new tests on recent powder samples have shown high pressure spikes that can damage personal property or injure you. For this reason we removed all Blue Dot data from .41 magnum tables. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
240 | Speer LSWC | 6.0 | 834 | start charge | |
240 | Speer LSWC | 7.0 | 912 | maximum charge | |
Speer Reloading Manual #14 max. case length: 1.285"; trim-to length: 1.275"; max cart. OAL: 1.610"; RCBS shell holder: #18; cart. case: Speer; primer: CCI 300 (except where otherwise specified in remarks); test firearm: Ruger Redhawk; barrel length: 7.5"; NOTE: The 225-grain SWC GC and 250-grain K bullets were cast in RCBS moulds; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
200 | LRNFP Cast | 5.9 | 812 | max load; COL: 1.570"; 11,100 cup | |
200 | Nosler JHP | 12.1 | 1350 | max load; bullet diam.: .429; COL: 1.600"; 39,700 cup | |
220 | Berry's Bullets FP | 6.8 | 754 | start load; COL: 1.610"; 10,900 psi | |
220 | Berry's Bullets FP | 10.0 | 1112 | max load; COL: 1.610"; 21,300 psi | |
225 | Speer JHP | 11.7 | 1260 | max load; bullet diam.: .429"; COL: 1.575"; 39,900 cup | |
240 | LSWC Cast | 10.7 | 1190 | max load; COL: 1.620"; 39,700 cup | |
Hodgdon Pistol Data - IMR Powder Case: Winchester; barrel length: 8.275"; twist: 1:20"; trim length: 1.280"; primer: Remington 2 1/2; bullet diam.: .430" (except where otherwise specified in remarks). NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
200 | Jacketed | 10.7 | 1215 | start load; min OAL: 1.610 | |
200 | Jacketed | 12.1 | 1350 | never exceed; min OAL: 1.610; 39,700 cup | |
225 | Jacketed | 10.3 | 1123 | start load; min OAL: 1.585 | |
225 | Jacketed | 11.7 | 1260 | never exceed; min OAL: 1.585; 39,900 cup | |
240 | Jacketed | 10.2 | 1062 | start load; min OAL: 1.590 | |
240 | Jacketed | 11.6 | 1190 | never exceed; min OAL: 1.590; 39,900 cup | |
240 | Lead | 9.5 | 1072 | start load; min OAL: 1.585 | |
240 | Lead | 10.7 | 1190 | never exceed; min OAL: 1.585; 39,700 cup | |
Lee Precision Data Large pistol primer. CAUTION: With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
240 | Hornady LSWC | 6.2 | 770 | bullet diam.: .430"; COL: 1.470"; 13,800 cup | |
246 | Rem LRN | 6.2 | 780 | bullet diam.: .431"; COL: 1.570"; 14,000 cup | |
IMR Pistol Data Maximum Loads case: Remington; barrel length: 6.5"; twist: 1:20"; trim length: 1.155"; primer: Remington 2 1/2; NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
185 | Cast LRNFP | 6.4 | 953 | start load; COL: 1.400"; 11,300 cup | |
185 | Cast LRNFP | 7.2 | 1043 | max load; COL: 1.400"; 13,600 cup | |
200 | Cast LRNFP | 6.0 | 839 | start load; COL: 1.450"; 8,900 cup | |
200 | Cast LRNFP | 7.2 | 989 | max load; COL: 1.450"; 13,400 cup | |
200 | Nosler JHP | 6.3 | 813 | start load; COL: 1.460"; bullet diam.: .429"; 9,900 cup | |
200 | Nosler JHP | 7.0 | 913 | max load; COL: 1.460"; bullet diam.: .429"; 13,200 cup | |
220 | Berry's Bullets FP | 6.1 | 781 | start load; COL: 1.460"; 9,800 cup | |
220 | Berry's Bullets FP | 6.9 | 898 | max load; COL: 1.460"; 13,600 cup | |
240 | Cast LSWC | 6.0 | 827 | start load; COL: 1.450"; 11,400 cup | |
240 | Cast LSWC | 6.5 | 892 | max load; COL: 1.450"; 13,400 cup | |
Hodgdon Data Case: Starline; barrel length: 8"; twist: 1:20"; trim length: 1.155"; primer: Winchester LP; bullet diam. .430" (except where otherwise specified in remarks). NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
240 | Lead | 5.5 | 693 | start load; min OAL: 1.470 | |
240 | Lead | 6.2 | 770 | never exceed; min OAL: 1.470; 13,800 cup | |
246 | Lead | 5.5 | 696 | start load; min OAL: 1.570 | |
246 | Lead | 6.2 | 780 | never exceed; min OAL: 1.570; 14,000 cup | |
Lee Precision Data CAUTION: With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. Large Pistol Primer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
205 | Cast #42798 | 6.8 | 761 | sugg. start load; 9,700 cup | |
205 | Cast #42798 | 7.7 | 838 | max load; 12,600 cup | |
215 | Cast #429215 gas check | 6.2 | 732 | sugg. start load; 10,900 cup | |
215 | Cast #429215 gas check | 6.8 | 801 | max load; 13,500 cup | |
Lyman Cast Bullet Handbook cases: Winchester; trim-to length: 1.152"; primers: CCI 300; primer size: Large Pistol; Lyman shell holder: No. 7; cast bullets used size to .429" dia.; firearm used: Universal Receiver and Special Vented Barrel; barrel length: 4"; twist: 1-20"; groove diameter: .429". NOTE: More Lyman cast bullet data available under .44 Smith & Wesson Special / .44 S&W Cast Bullet Data Lyman Reloading Handbook 49th Edition. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
240 | Speer Mag JHP or Mag JSP | 6.9 | 764 | maximum charge; DO NOT REDUCE | |
Speer Reloading Manual #14 max. case length: 1.160"; trim-to length: 1.150"; max cart. OAL: 1.615"; RCBS shell holder: #18; cart. case: Remington; primer: CCI 300 (except where otherwise specified in remarks); test firearm: Cimarron SAA; barrel length: 5.5"; NOTE: The 200-grain FN & CM, the 225-grain SWC GC and the 250-grain K bullets were cast in RCBS moulds. RCBS crimp-on gas checks used for the 225-grain SWC GC bullets. Maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
240 | Nosler Sporting Handgun Jktd HP and Jktd Soft Pt | 6.1 | 680 | maximum load; most accurate load tested | |
240 | Nosler Sporting Handgun Jktd HP and Jktd Soft Pt | 5.6 | 600 | ||
240 | Nosler Sporting Handgun Jktd HP and Jktd Soft Pt | 5.1 | 520 | ||
Using Nosler Bullets handgun: barrel: Douglas, length: 8.2", twist: 1-20"; case: Remington; primer: Rem. 2 1/2; bullets: 200 GR & 240 GR Sporting Handgun Revolver JHP; OACL: 1.455"; maximum SAAMI overall cartridge length: 1.615"; Use Maximum Loads with Caution | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
205 | Cast #427098 | 6.8 | 761 | sugg. start load; 1.537" OAL; 9,700 cup | |
205 | Cast #427098 | 7.7 | 838 | max load; 1.537" OAL; 12,600 cup | |
210 | Cast #429215 gas check | 6.2 | 732 | sugg. start load; 1.500" OAL; 10,900 cup | |
210 | Cast #429215 gas check | 6.8 | 801 | max load; 1.500" OAL; 13,500 cup | |
Cast Bullet Data Lyman Reloading Handbook 49th Edition cases: Winchester; trim-to length: 1.150"; primers: CCI 300; primer size: Large Pistol; Lyman shell holder: No. 7; firearm used: Universal Receiver; barrel length: 4" (except where otherwise noted in remarks); twist: 1-20"; groove dia.: .429" |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
200 | Cast LRNFP | 7.8 | 857 | starting load; 9,300 cup | |
200 | Cast LRNFP | 8.5 | 947 | maximum load; 12,900 cup | |
Hodgdon Pistol Data case: Winchester; barrel length: 6"; twist: 1:36"; trim length: 1.295"; primer: Winchester LP; bullet diam.: .430"; COL: 1.600"; NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
205 | Cast #42798 | 8.0 | 1090 | sugg. start load | |
205 | Cast #42798 | 9.5 | 1285 | max load | |
220 | Cast #429434 gas check | 7.8 | 1065 | sugg. start load | |
220 | Cast #429434 gas check | 9.0 | 1210 | max load | |
Lyman Cast Bullet Handbook cases: Remington Peters; trim-to length: 1.300"; primers: Remington 2 1/2; primer size: Large Pistol; Lyman shell holder: No. 14B; cast bullets used size to .430" dia.; firearm used: Marlin Model 94; barrel length: 24"; twist: 1-36"; groove diameter: .436". NOTE: More cast bullet data available under .44 WCF / .44-40 Winchester (Lyman Reloading Manual 49th Edition) |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
185 | Sierra JHP | 6.2 | 857 | primer: F 150; O.A. Ctg. Lgt.: 1.18; case expansion normal | |
200 | Speer JHP | 6.0 | 799 | primer: F 150; O.A. Ctg. Lgt.: 1.18; case expansion moderate; not sufficiently accurate | |
185 | Speer SWC | 5.7 | 761 | primer: F 150; O.A. Ctg. Lgt.: 1.135; case expansion moderate | |
200 | Hornady SWC | 5.8 | 770 | primer: F 150; O.A. Ctg. Lgt.: 1.225; case expansion normal | |
200 | Hornady SWC | 6.2 | 943 | primer: F 150; O.A. Ctg. Lgt.: 1.225; case expansion normal | |
JHP = jacketed hollowpoint; FMJ = full metal jacket; SWC = semiwadcutter; RNL = roundnose lead. Test Guns: Colt Gold Cup National Match and Colt service automatics. Ruger Convertible revolver with 4-5/8-inch barrel used for velocity comparisons. Federal cases used throughout tests. Velocities chronographed with Oehler Model 31 Chronotach and Model 51 electronic screens; velocities taken at ten feet; screen spacing, ten feet. Accuracy Goals: (five-shot groups - sandbag rest) - one inch at fifty feet; three to four inches at fifty yards. (Handloader Issue 76) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
155 | Cast LSWC | 7.0 | 941 | start load; COL: 1.230"; 11,800 cup | |
155 | Cast LSWC | 7.7 | 1056 | max load; COL: 1.230"; 16,100 cup | |
160 | Barnes TAC-XP | 6.1 | 971 | start load; COL: 1.200"; 17,300 psi | |
160 | Barnes TAC-XP | 6.5 | 1047 | max load; COL: 1.200"; 20,100 psi | |
180 | LFP | 6.7 | 928 | start load; bullet diam.: .452"; COL: 1.140"; 14,100 cup | |
180 | LFP | 7.4 | 1024 | max load; bullet diam.: .452"; COL: 1.140"; 17,800 cup | |
185 | Hornady JSWC | 6.8 | 890 | start load; COL: 1.135"; 14,800 cup | |
185 | Hornady JSWC | 7.3 | 970 | max load COL: 1.135"; 16,500 cup | |
200 | Speer JHP | 6.0 | 861 | start load; COL: 1.155"; 13,600 cup | |
200 | Speer JHP | 6.6 | 941 | max load; COL: 1.155"; 17,100 cup | |
200 | Cast LSWC | 6.2 | 836 | start load; COL: 1.225"; 13,000 cup | |
200 | Cast LSWC | 6.9 | 952 | max load; COL: 1.225"; 17,200 cup | |
230 | LRN | 5.5 | 828 | start load; bullet diam.: .452"; COL: 1.200"; 15,100 cup | |
230 | LRN | 6.0 | 897 | max load; bullet diam.: .452"; COL: 1.200"; 17,300 cup | |
230 | Hornady FMJ FP | 5.4 | 745 | start load; COL: 1.200"; 12,200 cup | |
230 | Hornady FMJ FP | 6.0 | 848 | max load; COL: 1.200"; 16,600 cup | |
Hodgdon Data Case: Winchester; twist: 1:16"; primer: Federal 150, Large Pistol; barrel length: 5"; trim length: .893"; bullet diam.: .451" (except where otherwise specified in remarks) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
185 | Rem MC HP | 6.9 | 890 | COL: 1.210"; 18,000 cup | |
200 | Hornady LSWC | 6.5 | 900 | bullet diam.: .452"; COL: 1.170"; 18,000 cup | |
200 | Speer JHP | 6.4 | 825 | COL: 1.170"; 17,200 cup | |
230 | Rem LRN | 6.2 | 825 | COL: 1.270"; 17,700 cup | |
230 | Rem MC | 6.0 | 745 | COL: 1.260"; 17,400 cup | |
IMR Pistol Data Maximum Loads case: Remington; barrel length: 5"; twist: 1:16"; trim length: .893"; primer: Remington 2 1/2; bullet diam.: .451" (except where otherwise specified in remarks); NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
185 | Jacketed | 5.7 | 760 | start load; min OAL: 1.150 | |
185 | Jacketed | 6.5 | 895 | never exceed; min OAL: 1.150; 17,700 cup | |
200 | Jacketed | 5.9 | 764 | start load; min OAL: 1.170 | |
200 | Jacketed | 6.4 | 825 | never exceed; min OAL: 1.170; 17,200 cup | |
200 | Lead | 5.6 | 787 | start load; min OAL: 1.170 | |
200 | Lead | 6.5 | 900 | never exceed; min OAL: 1.170; 18,000 cup | |
230 | Jacketed | 5.5 | 682 | start load; min OAL: 1.260 | |
230 | Jacketed | 6.0 | 745 | never exceed; min OAL: 1.260; 17,400 cup | |
230 | Lead | 5.8 | 778 | start load; min OAL: 1.270 | |
230 | Lead | 6.2 | 825 | never exceed; load; min OAL: 1.270; 17,700 cup | |
Lee Precision Data Large Pistol primer; with NEVER EXCEED LOADS maintain Minimum Over All Length or longer | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
185 | Cast #452389 | 5.5 | 825 | sugg. start load; 9,800 cup | |
185 | Cast #452389 | 6.5 | 1030 | max load; 17,400 cup | |
195 | Cast #452488 | 5.0 | 780 | sugg. start load; 10,300 cup | |
195 | Cast #452488 | 6.2 | 945 | max load; 16,200 cup | |
Lyman Cast Bullet Handbook cases: Remington; trim-to length: .895"; primers: Remington 2 1/2; primer size: Large Pistol; Lyman shell holder: No. 2; cast bullets used size to .450" dia.; firearm used: Universal Receiver; barrel length: 5"; twist: 1-16"; groove diameter: .450". NOTE: More Lyman cast bullet data available under .45 ACP Cast Bullet Data Lyman Reloading Handbook 49th Edition | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
185 | Remington Jacketed SWC/FMJ | 4.4 | 706 | sugg. start load; 1.135" OAL; 9,100 cup | |
185 | Remington Jacketed SWC/FMJ | 6.5 | 972 | max load; 1.135" OAL; 16,800 cup | |
185 | Hornady Jacketed HP/XTP | 4.9 | 633 | sugg. start load; 1.175" OAL; 7,100 cup | |
185 | Hornady Jacketed HP/XTP | 7.0 | 960 | max load; 1.175" OAL; 17,900 cup | |
200 | Speer Gold Dot Jacketed HP | 4.5 | 601 | sugg. start load; 1.178" OAL; 7,300 cup | |
200 | Speer Gold Dot Jacketed HP | 6.7 | 935 | max load; 1.178" OAL; 17,400 cup | |
225 | Speer Jacketed HP | 4.4 | 587 | sugg. start load; 1.243" OAL; 7,400 cup | |
225 | Speer Jacketed HP | 6.3 | 844 | max load; 1.243" OAL; 17,400 cup | |
230 | Speer TMJ | 4.9 | 678 | sugg. start load; 1.275" OAL; 10,800 cup | |
230 | Speer TMJ | 5.9 | 838 | max load; 1.275" OAL; 15,800 cup | |
Lyman Reloading Handbook 49th Edition cases: Remington, Federal; trim-to length: .888"; primers: Remington 2 1/2; primer size: Large Pistol; Lyman shell holder: No. 2; firearm used: Universal Receiver; barrel length: 5"; twist: 1-16"; groove dia.: .450" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
200 | Speer Semi-wadcutter | 5.2 | 811 | maximum load | |
200 | Speer Semi-wadcutter | 4.7 | 726 | ||
185 | Speer TMJ Match | 5.6 | 793 | maximum load | |
185 | Speer TMJ Match | 5.1 | 705 | ||
200 | Speer Hollow Point | 6.2 | 939 | maximum load | |
200 | Speer Hollow Point | 5.6 | 846 | ||
230 | Speer TMJ | 6.1 | 900 | maximum load | |
230 | Speer TMJ | 5.5 | 801 | ||
260 | Speer Hollow Point | 5.6 | 802 | maximum load | |
260 | Speer Hollow Point | 5.1 | 733 | ||
Speer Reloading Manual #11 gun: Colt Gov't. Model; barrel: 5"; twist: 1-16; cases: Speer; primers: CCI-300; maximum loads listed should be used with caution | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
200 | Speer LSWC | 4.7 | 726 | start charge | |
200 | Speer LSWC | 5.2 | 811 | maximum charge | |
185 | Speer TMJ Match SWC | 5.1 | 705 | start charge | |
185 | Speer TMJ Match SWC | 5.6 | 793 | maximum charge | |
185 | Speer GDHP or TMJ FN | 7.0 | 810 | start charge | |
185 | Speer GDHP or TMJ FN | 7.8 | 981 | maximum charge | |
230 | Speer GDHP SB or GDHP | 5.4 | 664 | start charge | |
230 | Speer GDHP SB or GDHP | 6.0 | 796 | maximum charge | |
Speer Reloading Manual #14 max. case length: 0.898"; trim-to length: 0.888"; max cart. OAL: 1.275"; RCBS shell holder: #3; cart. case: Speer; primer: CCI 300; test firearm: SIG P220; barrel length: 4.4"; IMPORTANT SAFETY NOTE: These loads were developed and tested for safe use in HANDGUNS. Not all loads may be suitable for use in a carbine or rifle chambered for this cartridge. If loading for a carbine or rifle, choose from among the loads developing the highest handgun velocities and load just a few rounds. Thoroughly test this small sample in your firearm in slow-fire mode, insuring that you achieve proper feeding and ejection. Be certain that all bullets exit the barrel; watching the target for each bullet strike is the best way to know that the load produces sufficient gas volume for a longer barrel. NOTE: Do not use the 230-GR TMJ RN loads with Gold Dot HP; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
185 | Nosler Custom Competition JHP | 6.9 | 888 | max; most accurate load tested | |
185 | Nosler Custom Competition JHP | 6.4 | 823 | ||
185 | Nosler Custom Competition JHP | 5.9 | 758 | ||
Using Nosler Bullets Handgun; case: Winchester; primer: Fed. 150; barrel length/make: 5" Douglas; twist: 1-16"; bullets: 185 GR Nosler Custom Competition JHP or 230 GR Nosler Sporting Handgun Pistol FMJ or JHP; OACL: 1.200"; maximum OACL: 1.275". Use Maximum Loads with Caution | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
200 | Lyman #452460 | 5.0 | 735 | sugg. start load; 9,000 cup | |
200 | Lyman #452460 | 6.2 | 945 | max load; 17,000 cup | |
200 | Lyman #452630 | 5.4 | 653 | sugg. start load; 8,600 cup | |
200 | Lyman #452630 | 6.7 | 900 | max load; 16,800 cup | |
200 GR (Lyman Cast Bullet Data) cases: Remington (except where otherwise specified in remarks); trim-to length: .888"; primers: Remington 2 1/2 (except where otherwise specified in remarks); primer size: Large Pistol; Lyman shell holder: No. 2; cast bullets used sized to .451" dia.; firearm used; Universal Receiver; barrel length: 5"; twist: 1-16"; groove dia.: .450"; Lyman #452460 OAL: 1.161"; Lyman #452630 OAL: 1.235" (Lyman Cast Bullet Manual 4th Edition) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
225 | Lyman #452374 | 5.0 | 675 | sugg. start load; 9,000 cup | |
225 | Lyman #452374 | 6.0 | 850 | max load; 15,200 cup | |
225 GR (Lyman Cast Bullet Data) cases: Remington (except where otherwise specified in remarks); trim-to length: .888"; primers: Remington 2 1/2 (except where otherwise specified in remarks); primer size: Large Pistol; Lyman shell holder: No. 2; cast bullets used sized to .451" dia.; firearm used; Universal Receiver; barrel length: 5"; twist: 1-16"; groove dia.: .450"; OAL: 1.272" (Lyman Cast Bullet Manual 4th Edition) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
200 | Cast #452460 | 5.0 | 735 | sugg. start load; 1.161" OAL; 9,000 cup | |
200 | Cast #452460 | 6.2 | 945 | max load; 1.161" OAL; 17,000 cup | |
200 | Cast #452630 | 5.4 | 653 | sugg. start load; 1.235" OAL; 8,600 cup | |
200 | Cast #452630 | 6.7 | 900 | max load; 1.235" OAL; 16,800 cup | |
225 | Cast #452374 | 5.0 | 675 | sugg. start load; 1.272" OAL; 9,000 cup | |
225 | Cast #452374 | 6.0 | 850 | max load; 1.272" OAL; 15,200 cup | |
Cast Bullet Data Lyman Reloading Handbook 49th Edition cases: Remington (except where otherwise specified in remarks); trim-to length: .888"; primers: Remington 2 1/2 (except where otherwise specified in remarks); primer size: Large Pistol; Lyman shell holder: No. 2; cast bullets used sized to .451" dia.; firearm used: Universal Receiver; barrel length: 5"; twist: 1-16"; groove dia.: .450" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
185 | Federal/ Sierra JHP | 7.1 | 1,003 | primer: CCI 300; group size: 1.89; very accurate; high velocity and energy | |
in a Browning BDA 4.4-inch barrel. Average of two or more five-shot groups for handloads. All groups shot at 25 yards from rest. All handloads in Federal brass. Oehler Model 32/61 Chronotach/Skyscreen System. Average temperature 32 degrees. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
185 | Federal/ Sierra JHP | 7.1 | 984 | primer: CCI 300; group size: 3.30; very accurate; high velocity and energy | |
in a Heckler & Koch P9S 4-inch polygonal-rifled barrel. Average of two or more five-shot groups for handloads. All groups shot at 25 yards from rest. All handloads in Federal brass. Oehler Model 32/61 Chronotach/Skyscreen System. Average temperature 32 degrees. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
200 | Jacketed | 5.3 | 703 | start load; min OAL: 1.170 | |
200 | Jacketed | 5.8 | 759 | never exceed; min OAL: 1.170; 14,620 cup | |
230 | Jacketed | 4.9 | 627 | start load; min OAL: 1.260 | |
230 | Jacketed | 5.4 | 685 | never exceed; min OAL: 1.260; 14,790 cup | |
Lee Precision Data CAUTION: With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
185 | Cast #452389 | 5.0 | 615 | sugg. start load | |
185 | Cast #452389 | 6.3 | 810 | max load | |
238 | Cast #452423 | 4.1 | 505 | sugg. start load | |
238 | Cast #452423 | 4.9 | 655 | max load | |
Lyman Cast Bullet Handbook cases: Remington; trim-to length: .894"; primers: Remington 2 1/2; primer size: Large Pistol; Lyman shell holder: No. 14A; cast bullets used size to .451" dia.; firearm used: Smith & Wesson Model 25 (except where otherwise specified in remarks); barrel length: 4 1/2 and 6 1/2"; twist: 1-16"; groove diameter: .451". NOTE: More Lyman cast bullet data available under .45 Auto Rim Lyman Reloading Handbook 49th Edition | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
185 | Hornady Jacketed HP/XTP | 6.0 | 709 | sugg. start load; 1.236" OAL; 7,500 cup | |
185 | Hornady Jacketed HP/XTP | 7.2 | 849 | max load; 1.236" OAL; 13,700 cup | |
200 | Speer Jacketed GDHP | 4.8 | 608 | sugg. start load; 1.180" OAL; 7,200 cup | |
200 | Speer Jacketed GDHP | 6.0 | 809 | max load; 1.180" OAL; 12,400 cup | |
225 | Speer Jacketed HP | 4.4 | 518 | sugg. start load; 1.255" OAL; 6,100 cup | |
225 | Speer Jacketed HP | 6.2 | 812 | max load; 1.255" OAL; 14,900 cup | |
200 | Cast #452460 | 5.0 | 660 | sugg. start load; 1.161" OAL | |
200 | Cast #452460 | 6.1 | 850 | max load; 1.161" OAL | |
225 | Cast #452374 | 5.0 | 560 | sugg. start load; 1.265" OAL | |
225 | Cast #452374 | 5.9 | 750 | max load; 1.265" OAL | |
Lyman Reloading Handbook 49th Edition cases: Remington; trim-to length: .888"; primers: Remington 2 1/2; primer size: Large Pistol; Lyman shell holder: No. 14A; cast bullets used sized to .451" dia.; firearm used: Universal Receiver, Smith & Wesson Model 25; barrel length: Universal Receiver - 4 1/2", Model 25 - 6 1/2"; twist: 1-16"; groove dia.: .451" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
200 | Speer LSWC | 4.7 | 659 | start charge | |
200 | Speer LSWC | 5.2 | 735 | maximum charge | |
230 | Speer GDHP, GDHP SB or 225 GR Colt JHP | 5.4 | 791 | start charge | |
230 | Speer GDHP, GDHP SB or 225 GR Colt JHP | 5.9 | 866 | maximum charge | |
Speer Reloading Manual #14 max. case length: 0.898"; trim-to length: 0.888"; max cart. OAL: 1.275"; RCBS shell holder: #8; cart. case: Remington; primer: CCI 300; test firearm: S&W Model 25-2; barrel length: 6.5"; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
185 | Remington JHP | 6.6 | 973 | Primer: Fed. 150; ME: 387; duplicates .45 ACP Remington factory load | |
All loads in Remington brass. Velocities taken on an Oehler M-10 Chronograph; 7 1/2 feet instrumental converted to muzzle velocity. Average temperature, 66 degrees. Test gun was an S&W M1917 with 5 1/2-inch barrel. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
160 | Cast LRNFP | 7.0 | 850 | start load; COL: 1.500"; 7,000 psi | |
160 | Cast LRNFP | 9.5 | 1157 | max load; COL: 1.500"; 13,300 psi | |
180 | Cast LRNFP | 7.0 | 807 | start load; COL: 1.540"; 7,800 psi | |
180 | Cast LRNFP | 9.1 | 1044 | max load; COL: 1.540"; 12,600 psi | |
200 | Cast LRNFP | 7.0 | 796 | start load; COL: 1.600"; 8,700 psi | |
200 | Cast LRNFP | 9.1 | 996 | max load; COL: 1.600"; 12,800 psi | |
200 | Hornady XTP | 6.6 | 740 | start load; COL: 1.600"; 8,400 psi | |
200 | Hornady XTP | 8.6 | 972 | max load; COL: 1.600"; 13,200 psi | |
215 | Cast LRNFP | 7.2 | 797 | start load; COL: 1.650"; 9,300 psi | |
215 | Cast LRNFP | 9.0 | 951 | max load; COL: 1.650"; 12,600 psi | |
225 | Hornady FTX | 7.0 | 743 | start load; COL: 1.600"; 9,200 psi | |
225 | Hornady FTX | 8.7 | 925 | max load; COL: 1.600"; 13,500 psi | |
230 | Cast LRNFP | 7.0 | 770 | start load; COL: 1.580"; 9,600 psi | |
230 | Cast LRNFP | 8.8 | 959 | max load; COL: 1.580"; 13,000 psi | |
250 | Cast LRNFP | 7.0 | 768 | start load; COL: 1.600"; 9,600 psi | |
250 | Cast LRNFP | 8.2 | 890 | max load; COL: 1.600"; 13,000 psi | |
250 | Hornady XTP | 6.0 | 630 | start load; COL: 1.595"; 10,300 psi | |
250 | Hornady XTP | 7.5 | 796 | max load; COL: 1.595"; 13,700 psi | |
260 | Speer JHP | 6.0 | 608 | start load; COL: 1.595"; 9,800 psi | |
260 | Speer JHP | 7.5 | 759 | max load; COL: 1.595"; 13,500 psi | |
Hodgdon Pistol Data Case: Winchester; barrel length: 7.25"; twist: 1:16"; trim length: 1.280"; primer: Winchester LP; bullet diam.: .452". NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
250 | Lead | 7.7 | 806 | start load; min. OAL: 1.600 | |
250 | Lead | 8.7 | 895 | never exceed; min. OAL: 1.600; 13,900 cup | |
Lee Precision Data Large Pistol primer; with NEVER EXCEED LOADS maintain Minimum Over All Length or longer | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
200 | Cast #452460 | 9.0 | 941 | sugg. start load; 1.550" OAL; 10,100 cup | |
200 | Cast #452460 | 10.0 | 1036 | max load; 1.550" OAL; 12,900 cup; potentially most accurate load | |
250 | Cast #454190 | 6.0 | 555 | sugg. start load; 1.600" OAL | |
250 | Cast #454190 | 8.5 | 890 | max load; 1.600" OAL | |
250 | Cast #452664 | 7.0 | 721 | sugg. start load; 1.570" OAL | |
250 | Cast #452664 | 8.5 | 897 | max load; 1.570" OAL | |
255 | Cast #452424 | 6.0 | 555 | sugg. start load; 1.575" OAL | |
255 | Cast #452424 | 8.0 | 835 | max load; 1.575" OAL | |
Cast Bullet Handgun Data Lyman Reloading Handbook 49th Edition cases: Winchester; trim-to length: 1.275"; primers: Winchester WLP; primer size: Large Pistol; Lyman shell holder: No. 11; cast bullets used sized to .452" dia.; firearm used: Universal Receiver & Ruger Blackhawk; barrel length: 7 1/2"; twist: 1-16"; groove dia.: .451" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
200 | Speer LSWC | 7.1 | 860 | start charge; firmly roll-crimp over the bullet shoulder for reliable performance | |
200 | Speer LSWC | 8.1 | 959 | maximum charge; firmly roll-crimp over the bullet shoulder for reliable performance | |
200 | Speer GDHP | 7.7 | 880 | start charge | |
200 | Speer GDHP | 8.7 | 1002 | maximum charge | |
Speer Reloading Manual #14 max. case length: 1.285"; trim-to length: 1.275"; max cart. OAL: 1.600"; RCBS shell holder: #20; cart. case: Winchester; primer: CCI 300 (except where otherwise specified in remarks); test firearm: Colt Single Action Army; barrel length: 5.5"; NOTE: the 255 SWC, 225 CAV & 230 CM bullets were cast in RCBS moulds; maximum loads should be used with CAUTION | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
200 | Speer Jacketed HP | 7.0 | 581 | sugg. start load; 1.557" OAL | |
200 | Speer Jacketed HP | 9.5 | 894 | max load; 1.557" OAL | |
225 | Speer Jacketed HP | 8.4 | 777 | sugg. start load; 1.575" OAL | |
225 | Speer Jacketed HP | 9.3 | 899 | max load; 1.575" OAL | |
230 | Speer Swaged Lead FN | 9.0 | 890 | sugg. start load; 1.590" OAL; 9,800 cup | |
230 | Speer Swaged Lead FN | 10.0 | 999 | max load; 1.590" OAL; 13,200 cup | |
Lyman Reloading Handbook 49th Edition cases: Winchester; trim-to length: 1.275"; primers: Winchester WLP; primer size: Large Pistol; Lyman shell holder: No. 11; firearms used: Universal Receiver & Ruger Blackhawk; barrel length: 7 1/2"; twist: 1-16"; groove dia.: .451" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
255 | Cast #452424 | 8.0 | 984 | 10" Bbl.; sugg. start load; 1.630" OAL | |
255 | Cast #452424 | 8.0 | 804 | 15" Bbl.; sugg. start load; 1.630" OAL | |
255 | Cast #452424 | 9.7 | 1153 | 10" Bbl.; max load; 1.630" OAL | |
255 | Cast #452424 | 9.7 | 938 | 15" Bbl.; max load; 1.630" OAL | |
325 | Cast #452651 gas check | 7.0 | 722 | 10" Bbl.; sugg. start load; 1.585" OAL | |
325 | Cast #452651 gas check | 7.0 | 781 | 15" Bbl.; sugg. start load; 1.585" OAL | |
325 | Cast #452651 gas check | 8.2 | 841 | 10" Bbl.; max load; 1.585" OAL | |
325 | Cast #452651 gas check | 8.2 | 895 | 15" Bbl.; max load; 1.585" OAL | |
in a T/C Contender & Encore Lyman Reloading Handbook 49th Edition This data was developed for use in the T/C Contender and Encore handguns. It can also be used in other single shot or bolt-action handguns such as the Remington XP-100 and Savage Striker. Do not use these loads in any other type of handgun. Shooters using the 15-inch 45 Colt/410 barrel must remove the internal choke before firing 45 Colt ammunition. Cases: Winchester; trim-to length: 1.275"; primers: Winchester WLP; primer size: Large Pistol; Lyman shell holder: No. 11; cast bullets used sized to .452" dia.; firearm used: Thompson/Center Contender and Encore; barrel length: 10" Contender and 15" Encore; twist: 1-24" Contender and 1-16" Encore; groove dia.: .452" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
250 | Oregon Trail Laser-Cast RNFP | 8.6 | 860 | ||
Traditional Handload Data All loads, fired from a 4 3/4-inch barreled USFA Pre-War SAA, produced between 850 and 870 fps average velocity and are thus listed at 860 fps to more or less duplicate traditional .45 Colt ballistics. Starline cases and CCI 300 Large Pistol primers were used throughout. Overall loaded length: 1.575 inches. Bullet diameter: .452 inch used herein (.454 inch suggested for guns with throats .454 or larger); maximum case length: 1.285 inches; trim-to case length: 1.275 inches. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
250 | Remington Lead RN | 6.0 | 583 | case expansion: moderate; accuracy class: C | |
250 | Remington Lead RN | 7.0 | 700 | case expansion: maximum; accuracy class: A+; 2nd best accuracy | |
Test revolver was Colt New Service with 5 1/2-inch barrel. All loads employed Dominion (Canadian) .455 Colt cases. Federal No. 150 Large Pistol primers used in all handloads. Oehler Model 31 Chronograph and Model 51 screens used to measure velocities. Velocities are instrumental, measured 8 feet from muzzle (not corrected to muzzle velocity). Lyman 3-die reloading set used to resize cases and seat bullets. The following accuracy classification system was used in these tests: A+ = 1-inch or less at 20 yards; A = 1 1/16 - 1 1/2 inches; B = 1 9/16 - 2 inches; C = 2 1/16 - 2 1/2 inches; D = Over 2 1/2 inches. |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
155 | Remington JHP | 7.8 | 1,275 | 34,300 psi | |
180 | Winchester JHP | 7.0 | 1,140 | 35,100 psi | |
200 | Hornady XTP | 6.2 | 1,040 | 35,700 psi | |
IMR Data - Maximum Loads case: Remington; barrel length: 5"; twist: 1:16"; trim length: .987"; primer: Remington 2 1/2; bullet diam.: .400"; COL: 1.250"; NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
155 | Jacketed | 7.5 | 1227 | start load; min OAL: 1.250 | |
155 | Jacketed | 7.8 | 1275 | never exceed; min OAL: 1.250; 34,300 psi | |
180 | Jacketed | 6.6 | 1076 | start load; min OAL: 1.250 | |
180 | Jacketed | 7.0 | 1140 | never exceed; min OAL: 1.250; 35,100 psi | |
200 | Jacketed | 5.7 | 963 | start load; min OAL: 1.250 | |
200 | Jacketed | 6.2 | 1040 | never exceed; min OAL: 1.250; 35,700 psi | |
Lee Precision Data Large Pistol Primer. CAUTION: With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
155 | Hornady JHP | 6.5 | 1,128 | case expansion normal; best accuracy with 155-grain Hornady | |
155 | Hornady JHP | 7.5 | 1,238 | case expansion near maximum; accurate | |
150 | Sierra JHP | 7.0 | 1,210 | case expansion normal | |
Jacketed Bullets Test pistol was a Colt Delta Elite with a five-inch barrel. All loads used Federal F-150 primers. Special care should be exercised to differentiate between HS-7 and AAC-7 powders! |
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
---|---|---|---|---|---|
88 | Speer JHP | 6.0 | 1,386 | OAL (inches): 1.04; case expansion: near max; best accuracy with 88-grain bullets | |
90 | Sierra JHP | 5.8 | 1,356 | OAL (inches): 1.03; case expansion: normal; best accuracy with 90-grain bullets | |
100 | Speer JHP | 5.7 | 1,302 | OAL (inches): 1.075; case expansion: normal; accurate | |
115 | Nosler FMJ | 5.5 | 1,221 | OAL (inches): 1.10; case expansion: maximum; accurate; best load with this bullet | |
115 | Sierra JHP | 5.4 | 1,210 | OAL (inches): 1.08; case expansion: near max; very accurate | |
115 | Hornady JHP | 5.2 | 1,167 | OAL (inches): 1.11; case expansion: normal; best load with 115 Hornady | |
115 | Speer JHP | 5.3 | 1,208 | OAL (inches): 1.11; case expansion: near max; good load | |
124 | Hornady FMJ-FP | 5.3 | 1,154 | OAL (inches): 1.12; case expansion: maximum | |
130 | Sierra FMJ-RN | 5.1 | 1,131 | OAL (inches): 1.12; case expansion: maximum | |
(Jacketed) in a Beretta Beretta 92-F, 5 inches. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
88 | Speer JHP | 6.0 | 1,414 | OAL (inches): 1.04; case expansion: near max; best accuracy with 88-grain bullets | |
90 | Sierra JHP | 5.8 | 1,369 | OAL (inches): 1.03; case expansion: normal; best accuracy with 90-grain bullets | |
100 | Speer JHP | 5.7 | 1,305 | OAL (inches): 1.075; case expansion: normal; accurate | |
115 | Nosler FMJ | 5.5 | 1,226 | OAL (inches): 1.10; case expansion: maximum; accurate; best load with this bullet | |
115 | Sierra JHP | 5.4 | 1,247 | OAL (inches): 1.08; case expansion: near max | |
115 | Hornady JHP | 5.2 | 1,177 | OAL (inches): 1.11; case expansion: normal; best load with 115 Hornady | |
115 | Speer JHP | 5.3 | 1,232 | OAL (inches): 1.11; case expansion: near max; good load | |
124 | Hornady FMJ-FP | 5.2 | 1,166 | OAL (inches): 1.12; case expansion: near max; good load | |
130 | Sierra FMJ-RN | 5.1 | 1,173 | OAL (inches): 1.12; case expansion: maximum | |
(Jacketed) in a Ruger Ruger P-85, 4 1/2 inches. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
126 | Magma SKU-9-125 roundnose cast (sized .3560) | 3.7 | 919 | OAL (inches): 1.11; case expansion: moderate; fourth best accuracy with Magma bullets | |
126 | Magma SKU-9-125 roundnose cast (sized .3560) | 4.0 | 1,023 | OAL (inches): 1.11; case expansion: normal; accurate | |
126 | Magma SKU-9-125 roundnose cast (sized .3560) | 4.3 | 1,063 | OAL (inches): 1.11; case expansion: maximum | |
125 | SAECO SWC Cast (Sized .355 inch) | 4.0 | 977 | OAL (inches): 1.09; case expansion: normal; second best accuracy with SAECO bullets | |
130 | Ohaus Cast (Sized .3565 inch) | 3.7 | 972 | OAL (inches): 1.13; case expansion: normal; 966 fps when taper-crimped | |
130 | Ohaus Cast (Sized .3565 inch) | 4.0 | 1,011 | OAL (inches): 1.13; case expansion: near max; third best accuracy with Ohaus bullets | |
124 | Hornady Swaged (Sized .355 inch) | 3.7 | 895 | OAL (inches): 1.13; case expansion: moderate | |
124 | Hornady Swaged (Sized .355 inch) | 4.2 | 1,007 | OAL (inches): 1.13; case expansion: normal; accurate | |
125 | Alberts Swaged (Sized .3565 inch) | 4.2 | 948 | OAL (inches): 1.11; case expansion: normal | |
in a Beretta Federal cases and Federal 100 Small Pistol primers used for all loads. Velocities are instrumental at 10 feet from the muzzle, using Oehler Model 31 chronotach and Oehler Model 51 electronic screens with 10-foot spacing. Barrel lengths of test gun: Beretta, 5-inch barrel. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
126 | Magma SKU-9-125 roundnose cast (sized .3560) | 3.7 | 920 | OAL (inches): 1.11; case expansion: moderate; fourth best accuracy with Magma bullets | |
130 | Ohaus Cast (Sized .3565 inch) | 4.0 | 1,012 | OAL (inches): 1.13; case expansion: near max; third best accuracy with Ohaus bullets | |
in a Ruger Federal cases and Federal 100 Small Pistol primers used for all loads. Velocities are instrumental at 10 feet from the muzzle, using Oehler Model 31 chronotach and Oehler Model 51 electronic screens with 10-foot spacing. Barrel lengths of test gun: Ruger, 4 1/2-inch barrel. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
80 | Barnes TAC-XP | 3.6 | 1006 | start load; COL: 1.025"; 24,900 psi | |
80 | Barnes TAC-XP | 4.6 | 1200 | max load; COL: 1.025"; 33,100 psi | |
90 | Speer GDHP | 4.9 | 1216 | start load; COL: 1.010"; 27,300 psi | |
90 | Speer GDHP | 5.5 | 1292 | max load; COL: 1.010"; 30,600 psi | |
95 | Sierra FMJ | 4.9 | 1172 | start load; COL: 1.020"; 27,800 psi | |
95 | Sierra FMJ | 5.4 | 1259 | max load; COL: 1.020"; 32,500 psi | |
115 | Speer GDHP | 4.5 | 1031 | start load; COL: 1.125"; 28,000 psi | |
115 | Speer GDHP | 4.9 | 1113 | max load; COL: 1.125"; 32,300 psi | |
124 | Berry's Bullets HBRN TP | 4.3 | 900 | start load; bullet diam.: .356"; COL: 1.150"; 25,100 psi | |
124 | Berry's Bullets HBRN TP | 4.9 | 1054 | max load; bullet diam.: .356"; COL: 1.150"; 31,800 psi | |
125 | Lead Conical Nose | 3.6 | 933 | start load; bullet diam.: .356"; COL: 1.125"; 24,600 psi | |
125 | Lead Conical Nose | 4.1 | 1035 | max load; bullet diam.: .356"; COL: 1.125"; 31,200 psi | |
125 | Hornady HAP | 3.3 | 804 | start load; bullet diam.: .356"; COL: 1.069"; 25,600 psi | |
125 | Hornady HAP | 3.8 | 914 | max load; bullet diam.: .356"; COL: 1.069"; 32,000 psi | |
125 | Sierra FMJ | 4.1 | 996 | start load; COL: 1.090"; 28,900 psi | |
125 | Sierra FMJ | 4.6 | 1074 | max load; COL: 1.090"; 33,700 psi | |
130 | Berry's Bullets RN | 4.2 | 918 | start load; bullet diam.: .356"; COL: 1.150"; 28,200 psi | |
130 | Berry's Bullets RN | 4.7 | 1026 | max load; bullet diam.: .356"; COL: 1.150"; 32,000 psi | |
147 | Hornady XTP | 2.8 | 707 | start load; COL: 1.100"; 24,000 psi | |
147 | Hornady XTP | 3.3 | 844 | max load; COL: 1.100"; 32,900 psi | |
Hodgdon Data Using IMR Powder Case: Winchester; twist: 1:10"; primer: CCI 500, Small Pistol; barrel length: 4"; trim length: .750"; bullet diam.: .355" (except where otherwise specified in remarks.) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
115 | Rem JHP | 5.1 | 1095 | COL: 1.110"; 32,400 cup | |
124 | Rem MC | 4.9 | 1040 | COL: 1.135"; 32,300 cup | |
147 | Hornady XTP | 4.3 | 950 | COL: 1.130"; 32,900 cup | |
IMR Pistol Data Maximum Loads case: Remington; barrel length: 4.0"; twist: 1:10"; trim length: .750"; primer: CCI 500; bullet diam.: .355"; NEVER EXCEED MAXIMUM LOADS | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
124 | Jacketed | 4.4 | 945 | start load; min OAL: 1.135 | |
124 | Jacketed | 4.9 | 1040 | never exceed; min OAL: 1.135; 32,300 cup | |
147 | XTP | 3.9 | 871 | start load; min OAL: 1.130 | |
147 | XTP | 4.3 | 950 | never exceed; min OAL: 1.130; 32,900 cup | |
115 | Jacketed | 4.6 | 995 | start load; min OAL: 1.110 | |
115 | Jacketed | 5.1 | 1095 | never exceed; min OAL: 1.110; 32,400 cup | |
Lee Precision Data Small pistol primer. CAUTION: With NEVER EXCEED LOADS maintain Minimum Over All Length or longer. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
92 | Cast #358242 | 5.0 | 1180 | sugg. start load; OAL: 1.045"; 23,400 cup | |
92 | Cast #358242 | 5.9 | 1310 | max load; OAL: 1.045"; 30,500 cup | |
115 | Cast #358345 | 3.8 | 1005 | sugg. start load; OAL: .997"; case: Win; primer: Win 1 1/2-108; 24,000 cup | |
115 | Cast #358345 | 4.5 | 1130 | max load; OAL: .997"; case: Win; primer: Win 1 1/2-108; 31,000 cup | |
121 | Cast #356402 | 3.5 | 935 | sugg. start load; OAL: 1.110"; case: Win; primer: Win 1 1/2-108; 21,000 cup | |
121 | Cast #356402 | 4.3 | 1080 | max load; OAL: 1.110"; case: Win; primer: Win 1 1/2-108; 31,500 cup | |
Lyman Cast Bullet Handbook 3rd Edition The trim-to length should be adhered to closely. A short case or crimp on the mouth can cause problems with headspace. Most popular cast bullet for this caliber is #356402. Cases: Federal (except where otherwise specified in remarks); trim-to length: .751"; primers: CCI 500 (except where otherwise specified in remarks); primer size: Small Pistol; Lyman shell holder: No. 12; cast bullets used sized to .358" dia.; firearm used: Universal Receiver; barrel length: 4"; twist: 1-10"; groove diameter: .358" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
90 | JHP | 5.5 | 1,401 | energy: 392; psi: 30,000 | |
Super Vel Data 5 inch Pressure Barrel | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
90 | Cast #356242 | 5.0 | 1180 | sugg. start load; 23,400 cup; 1.045" OAL | |
90 | Cast #356242 | 5.9 | 1310 | max load; 30,500 cup; 1.045" OAL | |
120 | Cast #356242 | 3.0 | 852 | sugg. start load; 21,400 cup; 1.065" OAL | |
120 | Cast #356242 | 3.9 | 1095 | max load; 31,300 cup; 1.065" OAL | |
Cast Bullet Handgun Data Lyman Reloading Handbook 49th Edition cases: Federal; trim-to length: .751"; primers: CCI 500; primer size; Small Pistol; Lyman shell holder: No. 12; cast bullets used sized to .356" dia.and all #2 Alloy; firearm used: Universal Receiver; barrel length: 4"; groove dia.: .355" | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
90 | Sierra JHC | 5.5 | 1,344 | very accurate with high velocity; OAL: .980" | |
4" Barrel Overall cartridge length must be carefully controlled to insure reliable feeding. Cartridges must lie parallel to magazine follower. (These notes especially apply to the Luger.) | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
141 | H&G 12B semiwadcutter | 3.8 | 930 | OAL (inches): 1.13 | |
141 | H&G 12B semiwadcutter | 4.0 | 990 | OAL (inches): 1.13 | |
147 | Redding/SAECO 929 semiwadcutter | 3.5 | 910 | OAL (inches): 1.16; poor accuracy | |
147 | Redding/SAECO 929 semiwadcutter | 3.8 | 945 | OAL (inches): 1.16; poor accuracy | |
147 | Lyman 358212 roundnose | 3.5 | 900 | OAL (inches): 1.17 | |
147 | Lyman 358212 roundnose | 4.0 | 975 | OAL (inches): 1.17 | |
157 | Lyman 356637 flatnose | 3.5 | 875 | OAL (inches): 1.15 | |
Cast Bullet Loads Reduce initial charge by 10% before working up. If the overall cartridge length is either increased or decreased, further reduce initial powder charges. | |||||
Wt. | Bullet | Charge | Velocity (FPS) | Remarks | |
90 | Hornady JHP | 5.0 | 1,159 | length (inches): 1.045; expansion: moderate; accuracy class: A+; most accurate load | |
90 | Hornady JHP | 5.8 | 1,263 | length (inches): 1.045; expansion: normal; accuracy class: B | |
115 | Hornady JHP | 5.2 | 1,109 | length (inches): 1.110; expansion: normal; accuracy class: B | |
115 | Hornady JHP | 5.5 | 1,148 | length (inches): 1.110; expansion: maximum; accuracy class: B | |
125 | Sierra FMJ | 5.0 | 1,101 | length (inches): 1.150; expansion: maximum; accuracy class: C+ | |
125 | Speer JSP | 5.2 | 1,101 | length (inches): 1.130; expansion: normal; accuracy class: D; poor load | |
in a 4-inch Barrel Test gun: S&W Model 39-2; R-P cases; Alcan SP primers. |